Vacuuming - Import export

Vacuumfilters are used for the cleaning of contaminated cutting fluids in metal processing and rolling mill applications. Clean cutting fluids lead to longer tool life, improved surface quality of workpieces or rolled goods, and efficient heat dissipation at the processing or forming point. Advantages: Compact size Excellent filtration results Low installation effort Low maintenance requirements Affordable price Optional configuration without consumable filter fleece, with continuous filter belt, and washing device Significantly lower consumption of filter fleece compared to gravity filter systems during challenging filtration tasks and fleece operation Operating Principle: The contaminated cutting fluid flows through a piping system (1) and an inlet distributor (11) into the dirt chamber (2) of the underpressure filter tank.

This is the accessories used in valve.

These parts are used in machinery accessories,produce by automatic turning machines.Precision work is demanding,machining tolerance is between +/-0.02mm.

Sustainable solution for process measurement, control and data log Compatible to the wide range of INFICON active gauges, the new VGC50x series of active gauge controllers are able to monitor and data log the entire pressure range from 10⁻¹⁰ to 1500 mbar (10⁻¹⁰ to 1125 Torr) and the set point status. The new VGC50x Active Gauge Controller series is the advanced successor of the discontinued VGC40x series which was the 1:1 compatible product Leybold`s Center-Controller line Material-No Typ 230 002 Center ONE 235 002 Center ONE (USA) 230 004 Center TWO 235 004 Center TWO (USA) 230 003 Center THREE 235 003 Center THREE (USA) As the direct successor for these series the new and advanced VGC50x series is able to accept all INFICON Active Gauges Successor product for VGC40x Controller series 1×10 -3×F.S. …1×F.S. 1×10 -3×F.S. …1×F.S. 1×10 -3×F.S. …1×F.S. 5×10 -4…1500 5×10 -4…1500 5×10 -4…1500 5×10 -10…1500 5×10 -10…1500 5×10 -10…1500 mbar, Torr, Pa, hPa, Micron, V mbar, Torr, Pa,...

The INFICON Bayard-Alpert Pirani Combination Gauge, BPG400, functions as two gauges in a single compact unit measuring from 5×10 -10 mbar to atmosphere (3.8×10 -10 Torr to atmosphere). Combining technologies reduces the complexity of installation, setup, and integration. Choose the BPG400 for affordable and repeatable process to base pressure measurements in one economic package. This Bayard Hot Ion Pirani combination Gauge BPG400 series direct replacement for the ITR 90 series: Part-No Typ Part-No Typ 353-500 BPG400 DN 25 ISO-KF = 120 90 ITR 90 DN 25 ISO-KF 353-502 BPG400 DN 40 CF-R = 120 92 ITR 90 DN 40 CF-R 353-505 BPG400-SP ProfiBus, DN 25 KF = 230 030 ITR 90 DN 25 ISO-KF 353-506 BPG400-SP ProfiBus, DN 40 CF-R 230 031 ITR 90 DN 40 CF-R 353-501 BPG400 LCD, DN 25 ISO-KF = 120 91 ITR 90 DN 25 ISO-KF Displ. 353-503 BPG400 LCD, DN 40 CF-R = 120 94 ITR 90 DN 40 CF-R Displ. 354-490 BPG400 Spare-Sensor DN 25 ISO-KF = E 121 02 ITR 90 Spare-Sensor IE90 DN 25 KF 354-491 BPG400...

The INFICON Gemini Inverted Magnetron Vacuum Gauge is the workhorse for all vacuum measurement applications (pending). Gemini combines two sensor systems into one small device to measure from atmosphere to 1x10 – 9 mbar. The patented ultra-low magnetic stray field design opens up a whole new range of applications. A unique interchangeable dual chamber sensor unit avoids cleaning cycles and reduces maintenance, making Gemini the most robust and economical vacuum gauge of its kind. Gemini Cold Cathode and combination comes with fully integrated digital electronics, providing ultimate flexibility for system integration. Cold cathode and Pirani combination option provides seamless transition, reliability, practicality and flexibility across wide ranging applications. MPG500 series represents the latest Technology to act as direct replacement for Cold Cathode or Penning Transmitters of the PTR 90 / PTR 225 (analog Versions) series. Part-No Typ Part-No Typ 3MB0-006-000P MPG500 SS,...

The INFICON Pirani Capacitance Diaphragm Gauge (PCG55x) combines the INFICON Pirani technology with the advantages of a ceramic capacitance diaphragm sensor in a single product. In the measurement range between 10 mbar and atmosphere the capacitance diaphragm technology provides gas-type independent, highly accurate values for reliable pressure measurement. The PCG55x offers also a variety of features which allows the right product configuration for the demanded application. This Pirani Capacitance Diaphragm Gauge series PCG550, PCG552, PCG554 direct replacement for TTR 101 series: Part-No Typ Part-No Typ 3PC1-001-0000 PCG550 FCC,16KF = 230350 V01 TTR 101 TTR 101, FCC, 16 KF 3PC1-00F-0000 PCG550 FCC,1/8NPT = 230351 V01 TTR 101 FCC, 1/8 NPT 3PC1-001-2000 PCG550 FCC,2SP,16KF = 230352 V01 TTR 101 FCC, 16 KF, 2SP 3PC1-00F-2000 PCG550 FCC,2SP,1/8NPT = 230353 V01 TTR 101 FCC, 1/8 NPT, 2SP 3PC1-001-1000 PCG550 FCC,LCD,16KF = 230354 V01 TTR 101 FCC, 16 KF, LCD 3PC1-00E-1000 PCG550...

The INFICON Pirani Standard Gauge (PSG55x) employs like his brothers PCG55x and PSG50x the most advanced digital Pirani technology available. The rugged sensor design combined with the compact size and the variety of features qualifies it as the right product for measurement from low to the high vacuum range. The Pirani Gauge series PSG550 / PSG552 / PSG554 are direct replacements for the TTR 911 / TTR 916 series: Part-No Typ Part-No Typ 3PI1-001-2020 PSG550 FCC,2SP,PBus,16KF = 89650V01 TTR 911 PB, DN16 KF 3PI1-001-2010 PSG550 FCC,2SP,DNet,16KF = 89651V01 TTR 911 D, DN16 KF 3PI2-001-2020 PSG552 FCC,2SP,PBus,16KF = 89652V01 TTR 916 PB, DN16 KF 3PI1-001-1000 PSG550 FCC,LCD,16KF = 89654V01 TTR 911 LCD, DN16 KF 3PI2-001-1000 PSG552 FCC,LCD,16KF = 89656V01 TTR 916 LCD, DN16 KF 3PI2-001-1000 PSG552 FCC,LCD,16KF = 89656V01 TTR 916 LCD, DN16 KF 3PI3-001-0000 PSG554 FCC,16KF = 89658V01 TTR 911 CC, DN16 KF 3PI3-001-2020 PSG554 FCC,2SP,PBus,16KF = 89659V01 TTR 911 CC PB, DN16 KF 355-925...

The INFICON Pirani Standard Gauges, PSG500 and PSG502-S, PSG510-S and PSG512-S employ the most advanced digital Pirani technology available in the marketplace. The rugged stainless steel sensor cell and compact design qualifies them for use on semiconductor systems and for standard applications, such as fore vacuum lines. The PSG500 / PSG502-S Pirani Gauge series are direct replacements for TTR 91 S / TTR96 S series: Part-No Typ Part-No Typ 350-060 PSG500 DN 16 ISO-KF = 230 035 TTR 91 DN 16 ISO-KF 350-061 PSG500 1/8" NPT = 230 038 TTR 91 1/8" NPT 350-062 PSG500 DN 16 CF-R = 230 036 TTR 91 DN 16 CF-R 350-068 PSG500 DN 16 CF-R, long = 230 037 TTR 91 DN 16 CF-R, long 350-080 PSG500-S DN 16 ISO-KF = 230 040 TTR 91 S DN 16 ISO-KF 350-081 PSG500-S 1/8" NPT = 230 043 TTR 91 S 1/8" NPT 350-088 PSG500-S DN 16 CF-R, long = 230 042 TTR 91 S DN 16 CF-R, long 350-140 PSG502-S DN 16 ISO-KF = 230 045 TTR 96 S DN 16 ISO-KF 350-148 PSG502-S DN 16 CF-R, long = 230 047 TTR 96 S DN 16 CF-R,...

INFICON SKY CDG200D high temperature manometers are your best choice for accurate total pressure measurement and control. CDG200D gauges are temperature controlled at 200 °C for superior performance in demanding semiconductor and plasma processes. They are available for full scale ranges from 1 Torr to 1000 Torr, with all common flange types and fieldbus interfaces and provide a linear 0 to 10 V, gas type independent, pressure signal. INFICON capacitance manometers use an ultra pure alumina ceramic diaphragm which is corrosion proof. The advantages of the ceramic sensor are better signal stability, faster recovery from atmosphere, short warm up time and an extraordinary lifetime. INFICON CDG are high quality, cost effective pressure sensors for demanding semiconductor, plasma and vacuum applications. with EtherCAT digital interface available now ! (1) Non-linearity, hysteresis, repeatability at 25 °C ambient operating temperature without temperature effects after 2 hours...

INFICON SKY CDG160D high temperature manometers are your best choice for accurate total pressure measurement and control. CDG160D gauges are temperature controlled at 160 °C for superior performance in demanding semiconductor and plasma processes. They are available for full scale ranges from 1 Torr to 1000 Torr, with all common flange types and fieldbus interfaces and provide a linear 0 to 10 V, gas type independent, pressure signal. INFICON capacitance manometers use an ultra pure alumina ceramic diaphragm which is corrosion proof. The advantages of the ceramic sensor are better signal stability, faster recovery from atmosphere, short warm up time and an extraordinary lifetime. INFICON CDG are high quality, cost effective pressure sensors for demanding semiconductor, plasma and vacuum applications. with EtherCAT digital interface available now ! (1) Non-linearity, hysteresis, repeatability at 25 °C ambient operating temperature without temperature effects after 2 hours...

INFICON SKY CDG100D manometers are your best choice for accurate total pressure measurement and control. CDG100D gauges are temperature controlled at 100 °C for superior performance in demanding semiconductor and plasma processes. They are available for full scale ranges from 100 mTorr to 1000 Torr, with all common flange types and fieldbus interfaces and provide a linear 0 to 10 V, gas type independent, pressure signal. INFICON capacitance manometers use an ultra pure alumina ceramic diaphragm which is corrosion proof. The advantages of the ceramic sensor are better signal stability, faster recovery from atmosphere, short warm up time and an extraordinary lifetime. INFICON CDG are high quality, cost effective pressure sensors for demanding semiconductor, plasma and vacuum applications. with EtherCAT digital interface available now ! (1) Non-linearity, hysteresis, repeatability at 25 °C ambient operating temperature without temperature effects after 2 hours operation. (2)...

INFICON SKY CDG045D manometers are your best choice for high accurate total pressure measurement and control. CDG045D gauges are temperature controlled at 45 °C for superior signal stability and repeatability. They are available for full scale ranges from 50 mTorr to 1000 Torr, with all common flange types and fieldbus interfaces and provide a linear 0 to 10 V, gas type independent, pressure signal. INFICON capacitance manometers use an ultra pure alumina ceramic diaphragm which is corrosion proof. The advantages of the ceramic sensor are better signal stability, faster recovery from atmosphere, short warm up time and an extraordinary lifetime. INFICON CDG are high quality, cost effective pressure sensors for demanding vacuum applications. with EtherCAT digital interface available now ! (1) Non-linearity, hysteresis, repeatability at 25 °C ambient operating temperature without temperature effects after 2 hours operation. (2) Increase 10 … 90 percent FS (3) For pressure control...

INFICON temperature compensated Edge CDG025D2 with EtherCAT Capacitance Diaphragm Gauge is a highly accurate vacuum measurement instrument designed for harsh manufacturing environments. The proven temperature compensated , corrosion resistant, ultra-pure ceramic sensor provides superior span stability over many years paired with state-of-the-art zero stability. Edge comes with the INFICON patented unique sensor shield which protects the gauge from undesired process by-products. Advanced electronics offer a wide range of configurable signal conditioning for all applications with EtherCAT fieldbus interface. (1) Non-linearity, hysteresis, repeatability at 25 °C ambient operating temperature without temperature effects after 2 hours operation. (2) Increase 10 … 90 percent FS (3) For pressure control type only (4) 18% Cr, 10% Ni, 3% Mo, 69% Fe

The INFICON SKY CDG025D Capacitance Diaphragm Gauge line of highly accurate temperature compensated manometers is designed for stable performance in harsh manufacturing tool environments. Advanced digital electronics improve gauge performance and offer easy handling features such as one pushbutton zero function. New Version with 2wire current Loop is now available. The corrosion resistant ultra pure ceramic sensor provides excellent zero stability with a long life expectancy of several million pressure cycles, including atmospheric bursts. A unique sensor shielding (patent pending) protects the gauge from process contamination. A robust mechanical design and digital electronics improve EMC compatibility, long term stability and temperature compensation. The CDG025D sets new standards for fast stability after power on and fast recovery from atmospheric pressure exposure. (1) Non-linearity, hysteresis, repeatability at 25°C ambient operating temperature without temperature effects...

The INFICON SKY CDG025D Capacitance Diaphragm Gauge line of highly accurate temperature compensated manometers is designed for stable performance in harsh manufacturing tool environments. Advanced digital electronics improve gauge performance and offer easy handling features such as one pushbutton zero function and setpoint adjustment. The corrosion resistant ultra pure ceramic sensor provides excellent zero stability with a long life expectancy of several million pressure cycles, including atmospheric bursts. A unique sensor shielding (patent pending) protects the gauge from process contamination. A robust mechanical design and digital electronics improve EMC compatibility, long term stability and temperature compensation. The CDG025D sets new standards for fast stability after power on and fast recovery from atmospheric pressure exposure. (1) Non-linearity, hysteresis, repeatability at 25°C ambient operating temperature without temperature effects after 2 hours operation. (2)...

The INFICON SKY CDG025D Capacitance Diaphragm Gauge line of highly accurate temperature compensated manometers is designed for stable performance in harsh manufacturing tool environments. Advanced digital electronics improve gauge performance and offer easy handling features such as one pushbutton zero function and setpoint adjustment. The corrosion resistant ceramic sensor provides excellent zero stability with a long life expectancy of several million pressure cycles, including atmospheric bursts. A unique sensor shielding (patent pending) protects the gauge from process contamination. A robust mechanical design and digital electronics improve EMC compatibility, long term stability and temperature compensation. The CDG025D sets new standards for fast stability after power on and fast recovery from atmospheric pressure exposure. (1) Non-linearity, hysteresis, repeatability at 25 °C ambient operating temperature without temperature effects after 2 hours operation. (2) Increase 10...

The INFICON Bayard-Alpert Pirani Combination Gauge, BPG400, functions as two gauges in a single compact unit measuring from 5×10 -10 mbar to atmosphere (3.8×10 -10 Torr to atmosphere). Combining technologies reduces the complexity of installation, setup, and integration. Choose the BPG400 for affordable and repeatable process to base pressure measurements in one economic package. 1) Reduced accuracy during degas 2) Simultaneous use of RS232C or VGC40x controller series and Fieldbus is not allowed 3) For RS232C operation <30m

The INFICON single Bayard-Alpert Hot Ion gauge BAG302 covers a wide measurement range from 1.3 × 10 -9 to 6.7×10 -2 mbar (1 × 10 -9 to 5 × 10 -2 Torr). The compact All-In-One Hot Ion gauge BAG302 offers an easy to exchange dual filament sensor, a built in OLED display, set-point relay and a log-linear analog output as well as an integrated RS485 digital interface for increased integration flexibility. These features combined with the rugged design makes the BAG302 an affordable and repeatable process to base pressure measurement instrument of its own and provides a high value/ low cost of ownership choice. (Granville-Phillips ® and Micro-Ion ® are registered trademarks of MKS Instruments, Andover, MA)

The INFICON Pirani Gauge Display PGD400 in combination with the INFICON Pirani Standard Gauge PSG5xx provides a cost effective pressure monitoring solution. Although it is called Pirani Gauge Display the PGD400 also supports our PCG55x and MPG series vacuum gauges.

Sustainable solution for process measurement, control and data log Compatible to the wide range of INFICON active gauges, the new VGC50x series of active gauge controllers are able to monitor and data log the entire pressure range from 10⁻¹⁰ to 1500 mbar (10⁻¹⁰ to 1125 Torr) and the set point status. 1×10 -3×F.S. …1×F.S. 1×10 -3×F.S. …1×F.S. 1×10 -3×F.S. …1×F.S. 5×10 -4…1500 5×10 -4…1500 5×10 -4…1500 5×10 -10…1500 5×10 -10…1500 5×10 -10…1500 mbar, Torr, Pa, hPa, Micron, V mbar, Torr, Pa, hPa, Micron, V mbar, Torr, Pa, hPa, Micron, V

INFICON ISO-KF fittings are manufactured according to ISO 2861/1, DIN 28403 and Pneurop 6606. Our quality fittings are the standard components for all vacuum and high vacuum applications. The high quality INFICON components are designed and tested for leak rates less than 1 x 10 -9 mbar l/s. Hexagon socket head cap screw; Inox, 10-32 UNF x 5/8"; silver plated Hexagon socket head cap screw; Inox, 10-32 UNF x 5/8"; silver plated Hexagon socket head cap screw; Inox, 10-32 UNF x 5/8"; silver plated Hexagon socket head cap screw; Inox, 10-32 UNF x 5/8"; silver plated Washer DIN 125 A , A2 5.3/10x1 Washer DIN 125 A , A2 5.3/10x1 Washer DIN 125 A , A2 5.3/10x1 Washer DIN 125 A , A2 5.3/10x1

INFICON ISO-KF fittings are manufactured according to ISO 2861/1, DIN 28403 and Pneurop 6606. Our quality fittings are the standard components for all vacuum and high vacuum applications. The high quality INFICON components are designed and tested for leak rates less than 1 x 10 -9 mbar l/s. Hexagon head screw; DIN933, A2, M5x20; silver plated Hexagon head screw; DIN933, A2, M5x20; silver plated Hexagon head screw; DIN933, A2, M5x20; silver plated Hexagon head screw; DIN933, A2, M5x20; silver plated Washer DIN 125 A , A2 5.3/10x1 Washer DIN 125 A , A2 5.3/10x1 Washer DIN 125 A , A2 5.3/10x1 Washer DIN 125 A , A2 5.3/10x1

INFICON ISO-KF fittings are manufactured according to ISO 2861/1, DIN 28403 and Pneurop 6606. Our quality fittings are the standard components for all vacuum and high vacuum applications. The high quality INFICON components are designed and tested for leak rates less than 1 x 10 -9 mbar l/s.

INFICON ISO-KF fittings are manufactured according to ISO 2861/1, DIN 28403 and Pneurop 6606. Our quality fittings are the standard components for all vacuum and high vacuum applications. The high quality INFICON components are designed and tested for leak rates less than 1 x 10 -9 mbar l/s.

INFICON ISO-KF fittings are manufactured according to ISO 2861/1, DIN 28403 and Pneurop 6606. Our quality fittings are the standard components for all vacuum and high vacuum applications. The high quality INFICON components are designed and tested for leak rates less than 1 x 10 -9 mbar l/s.

INFICON ISO-KF fittings are manufactured according to ISO 2861/1, DIN 28403 and Pneurop 6606. Our quality fittings are the standard components for all vacuum and high vacuum applications. The high quality INFICON components are designed and tested for leak rates less than 1 x 10 -9 mbar l/s.

INFICON ISO-KF fittings are manufactured according to ISO 2861/1, DIN 28403 and Pneurop 6606. Our quality fittings are the standard components for all vacuum and high vacuum applications. The high quality INFICON components are designed and tested for leak rates less than 1 x 10 -9 mbar l/s.

INFICON offers economical priced ISO-KF flange feedthroughs which can be found in all standard vacuum applications all over the world for many years. In addition to this feedthroughs a choice of connectors for vacuum and atmosphere side of vacuum chamber is configured. For UHV applications CF flanged feedthroughs are available in different sizes and technical specifications.