Hammer mills - Import export

ERDWICH hammer mills are the answer to the challenge of selectively shredding hard and brittle materials. Then again, ERDWICH hammer mills also take the pelletisation of rubbery materials – as preparation for downstream separation systems – in their stride. A tough customer? Just so. ERDWICH hammer mills are especially suited to metal, electrical and electronic scrap or swarf from steel or aluminium – and many other materials besides. Simple adjustability during operation also makes short work of the pelletisation of non-ferrous metals. The final fragment size is variable and can be changed during operation. That’s also a great example of the product’s flexibility in catering to a wide range of applications. For the selective challenges in life. ERDWICH hammer mills.

The broad applications spectrum of SERVOLIFT milling and sieving equipment leads to flexible and user-friendly solutions in combination with handling systems. The areas of application stretch from controlled sieving in order to remove contamination from raw materials to fractionation, calibration to deagglomeration. Sieve mills, vibration sieve machines or inline sieve equipment in combination with mobile or stationary lifting systems provide a flexible, compact and easy-to-clean system. Size as needed Technical description Stainless steel or cGMP/FDA compliant designs Use as sieve mills (cone mills), hammer mills, oscillating sieve mills Various throughput depending upon the product and particle size Lifting height can be customized Broad control designs, from simple microcontrollers with digital displays to PLC controls Explosion-protected designs in adherence to Atex Zone 1/21 and 2/22.

These types of machines are used for a variety of applications when combined with process machines. The use of cone mills, hammer mills, vibration sieves, sifters, mobile for various areas or stationary. The broad applications spectrum of these devices can be seen in weighing for raw materials preparation or granulation for calibration, to name two examples. The take-up system is designed and adapted depending upon the process machines and the specified runs. Take-up of various additional devices Technical description cGMP-compliant design Mobile or stationary or combinable for high flexibility Adapted take-up system, depending upon the process machines Variable, adjustable lifting function - for mobile units with telescoping designs for low drive-through heights Function extensions through the integration of tilting and pivoting functions Various containment designs, such as low-dust connections up to high-containment solutions Extensive control designs, depending upon...

The Hammer Mill, series PHMS is used for the economical preparation of wood chips from round wood, residual wood, waste wood or annual plants. The wood chips are of high quality and can be directly injected for combustion, or used as flakes for briquetting and pelletizing. Due to their quality they are also used for the production of core layer and surface layer material during the production of wood-based panels. Characteristics, Function Material is fed vertically from above The gravity sifter "Cleanomat" separates heavy contaminants from the feed material Flat steel hammers rotating at high speed split the feed material into flakes Stationary impact elements support the size reduction process and relieve the screens The perforation of the screens determines the size of the flakes The symmetrically designed machine housing allows operation of the mill in both directions Rotating flat steel hammers can swing back when large foreign objects penetrate into the grinding...

The Hammer Mill, series PHMS is used for the economical preparation of wood chips from round wood, residual wood, waste wood or annual plants. The wood chips are of high quality and can be directly injected for combustion, or used as flakes for briquetting and pelletizing. Due to their quality they are also used for the production of core layer and surface layer material during the production of wood-based panels. Characteristics, Function Material is fed vertically from above The gravity sifter "Cleanomat" separates heavy contaminants from the feed material Flat steel hammers rotating at high speed split the feed material into flakes Stationary impact elements support the size reduction process and relieve the screens The perforation of the screens determines the size of the flakes The symmetrically designed machine housing allows operation of the mill in both directions Rotating flat steel hammers can swing back when large foreign objects penetrate into the grinding...

Surging demand by the pelletizing industry has caused a shortage of available saw dust and shavings. Numerous industries, like wood–based panelboard producers and the power plants are forced to find alternative sources. Substitution of suitable replacements has become urgent to ensure a fibre supply and to prevent shortages. Wood chips are often the only available source. Because of increasing numbers of produc-tion lines for pellets and particleboard a shortage of small fibre, has resulted. The flake produced from wet wood chips by the optimally PHMC hammer mill, can be used as an additional source or a 100% substitute of saw dust. Advantages Processing of wet chips (moisture u > 100%) Flake preparation of chips to a coarse saw dust type material Ensure the fibre supply in existing processing lines High machine availability at lowest maintenance an labour costs Independence from saw dust supply Future-proof for the usage of different material types by simple adjustment of...

Correctly processed residual wood and waste wood constitute a valuable raw material. The Impact Hammer Mill, series PHPS converts pre-shredded residual wood and waste wood of any kind into valuable raw material for material and thermal recovery. Even contaminated materials can be processed. Heavy foreign objects in the feed material are separated and automatically discharged. Characteristics, Function Material feeding is vertically from above Heavy, rotating hammers break the material and throw it against the impact plates The wood is split along the grain and enclosed metal contaminants are set free, separated and discharged Further processing of the wood pieces is effected by stationary breaker and comb bars The end fineness is determined by the perforation of the integrated screen Split housing design allows hydraulic opening Sturdy disc rotor is stress-relieved Adjustable separation degree of the discharge chute for metal pieces Device for hydraulic hammer...

Surging demand by the pelletizing industry has caused a shortage of available saw dust and shavings. Numerous industries, like wood–based panelboard producers and the power plants are forced to find alternative sources. Substitution of suitable replacements has become urgent to ensure a fibre supply and to prevent shortages. Wood chips are often the only available source. Because of increasing numbers of produc-tion lines for pellets and particleboard a shortage of small fibre, has resulted. The flake produced from wet wood chips by the optimally PHMC hammer mill, can be used as an additional source or a 100% substitute of saw dust. Advantages Processing of wet chips (moisture u > 100%) Flake preparation of chips to a coarse saw dust type material Ensure the fibre supply in existing processing lines High machine availability at lowest maintenance an labour costs Independence from saw dust supply Future-proof for the usage of different material types by simple adjustment of...

Correctly processed residual wood and waste wood constitute a valuable raw material. The Impact Hammer Mill, series PHPS converts pre-shredded residual wood and waste wood of any kind into valuable raw material for material and thermal recovery. Even contaminated materials can be processed. Heavy foreign objects in the feed material are separated and automatically discharged. Characteristics, Function Material feeding is vertically from above Heavy, rotating hammers break the material and throw it against the impact plates The wood is split along the grain and enclosed metal contaminants are set free, separated and discharged Further processing of the wood pieces is effected by stationary breaker and comb bars The end fineness is determined by the perforation of the integrated screen Split housing design allows hydraulic opening Sturdy disc rotor is stress-relieved Adjustable separation degree of the discharge chute for metal pieces Device for hydraulic hammer...

The Impact Hammer Mill, series PHPH ''Grizzly®'' was developed for the economical size reduction of residual- and waste wood of any kind. Not only pre-broken waste wood but also non precut, long recycling wood can be introduced into the mill. The machine distinguishes itself by high throughput rates at low specific energy consumption, low operating costs as well as robust and durable design. Any wood prepared with the „Grizzly®“ is used as a high quality and uniform raw material for material and thermal recovery. Characteristics, Function Material is fed horizontally from the front Size reduction is performed by impact and breaking combs and breaking ledges arranged behind the rotor Collection device for larger foreign objects which can be hydraulically opened for emptying Robust, wear-resistant and multi-split housing which can be easily opened via a hydraulic system Machine parts in the size reduction area made from wear-resistant and durable materials Oscillating hammers...

The Impact Hammer Mill, series PHPH ''Grizzly®'' was developed for the economical size reduction of residual- and waste wood of any kind. Not only pre-broken waste wood but also non precut, long recycling wood can be introduced into the mill. The machine distinguishes itself by high throughput rates at low specific energy consumption, low operating costs as well as robust and durable design. Any wood prepared with the „Grizzly®“ is used as a high quality and uniform raw material for material and thermal recovery. Characteristics, Function Material is fed horizontally from the front Size reduction is performed by impact and breaking combs and breaking ledges arranged behind the rotor Collection device for larger foreign objects which can be hydraulically opened for emptying Robust, wear-resistant and multi-split housing which can be easily opened via a hydraulic system Machine parts in the size reduction area made from wear-resistant and durable materials Oscillating hammers...

Fine Mill The solution for fine grinding Ebbecke Verfahrenstechnik AG is your specialist for demanding tasks in the area of ??contract grinding. The fine grinding plants used enable the dissolution of agglomerates as well as the breaking up of solid grain structures including even the very finest grinding. All our grinding plants for bulk material processing are made of stainless steel and designed with dosing devices, discharge with one-way filters, separators and bunkers as closed plants. Accordingly, they comply with all the strict specifications and hygiene standards of the of food, pharmaceuticals and cosmetics industries. Technical data Target fineness: 1.0-5,000 µm Plant types: Classifier mills, air jet grinding plants, spiral jet grinding plants, pin mills, cross beater mills, hammer mills, Fitzmill, screen mills, disc mills, graters, crushers, cryogenic grinding, nitrogen overlaid plants Product-contacting parts: Stainless steel Delivery in: Bags, bales, Big Bags, octa

Crushing-wear-parts for hammer-mills, pulverizer mills, jaw crusher and roller crushers Special heat resisting and wear resisting materials are needed in the limestone and cement production. Already since many years we develop and supply high quality casting parts that fulfill these requirements and extend the service time of your production facilities. In order to achieve this, we produce tailored products in close collaboration with our customers that are designed to meet the special demands. We also consult you in questions regarding the choice of the materials and the design. In addition to that, CS-specific-materials and CS-design-developments show our capability.