Locking rings - Import export

Circlips and Locking Rings consist of a semi-flexible metal ring with open ends that can be snapped into place. They fit in a groove on a shaft or inside a bore and locates the shaft axially in one direction.

Removal of determined locking ring class (double removal) with control measurement and transfer to assembly station Locking ring assembly and testing (cycle time approx. 30 sec.)

Novelis’ fracture-proof, seamless aluminum bottles offer needed protection when transporting and storing sensitive and critical goods. Novelis produces aluminum bottles for a range of applications — from commercial use to United Nations-approved packaging — in several coating configurations and sizes with fill capacities ranging from 38 ml to 6250 ml. These bottles include rolled thread for screw stoppers, tamper-proof seal and screw closure, plastic screw closure and locking ring, plastic threaded ring for pilfer-proof closure and flex-spout closure system.

ViscoTec 1C dispenser vipro-PUMP ▪ Volumetric dispensing, regardless of viscosity ▪ For low to high viscosity materials ▪ Particularly suitable for highly abrasive, filled or shear sensitive materials ▪ Modular scalability of volume flow within the model range ▪ Programmable suck-back prevents dripping or stringing of product ▪ Material entry with Tri-Clamp DN 20 connection for optimized material flow and fast coupling of material supply ▪ Locking ring for easy and fast disassembling of drive unit ▪ Drive unit connection with optimized power transmission free from clearance ▪ Optimized dispenser bracket for easy adjustable mounting ▪ Long lifetime due to low wear ▪ Different rotor and stator materials available ▪ Continuous dosing, pulsation free ▪ Interior non-stick coated ▪ Dividable rotor assembly for easy & fast replacement and low spare part costs ▪ Easy cleaning and maintenance due to quick assembly and disassembly options

Measuring groove widths for selecting locking ring classes

Axial bearing 1000 N press, locking ring assembly and testing station

Aluminum roll-on closure with locking ring and vertical notches for disposable and reusable bottles

Test OK or NOK. Locking ring assembly over envelope circle

Pilfer proof closures are the most suitable e.g. for spirituous beverages and are equipped with an EPE sealing insert (polyethylene foam). The closures can be delivered with transparent or body colours as well as in lots of printed versions, with locking ring or with vertical notches Special version with vertical perforation for returnable bottles is available upon request.

Ventilating aluminium closures are good for fruit juices - also with carbonic acid, hot and cold fillings, heat exchangers and suitable for pasteurisation. The closures can be delivered with transparent and body colours as well as in lots of printed versions. They are available with a locking ring or with vertical notches and in addition with head vent.

The gas-tight aluminium closures are suitable for mineral water, soft drinks, beer, wine, sparkling wine, milk and milkshakes, suitable for cold and hot filling, pasteurisation and for sterilisation. The closures can be delivered with transparent or body colours as well as lots of printed versions, with or without locking ring and with 5-fold or 6-fold vertical notching. Please find PVC-free closures in the section Special closures.

Backlash-free Metal Bellows Coupling Series PKB with locking ring Series PKB with locking ring Metal bellows made of stainless steel, hubs made of aluminum Backlash-free and torsional stiffness High-tensile pluggable hub High power performance Wear- and maintenance-free Axial pluggable Axial mountable from in- and outside Technical Data T KN = Nominal torque M A = Tightening torque of retaining screws C y dyn = Dynamic torsional stiffness Cr = Radial spring stiffness Ca = Axial spring stiffness n max = Max. rotational speed V = Preload distance △Ka = Max. approved misalignment axial △Kw = Max. approved misalignment angular △Kr = Max. approved misalignment radial J = Moment of inertia

Shaft Couplings RfN 5071 Standard series – this range is the most popular, being used in most applications. Characteristics Shrink discs are the modern method for creating a mechanical shrink fit. The shrink disc consists of either one or two thrust rings with tapered bores and a mating tapered inner ring. By tightening locking screws the thrust rings are drawn together compressing the inner ring and applying pressure to the outside of the hub clamping it to the shaft. Being positioned around the hub there is only one interface transmitting the loads giving the shrink disc method distinct advantages such as offering the possibility of very concentric and well balanced connections that are suited to high speed applications. Traditional shrink fits require complicated calculations, close machining tolerances and fine surface finishes, they also need considerable effort with mounting and removal. The Shrink Disc connection has none of these disadvantages and is better than any of...

Stainless steel series – for applications where corrosion resistance and high transmissible torque is required. This new design of Shrink Disc is made from stainless steel forged rings and uses high strength stainless steel screws. These units are available from 14mm to 195mm bore. Characteristics Shrink discs are the modern method for creating a mechanical shrink fit. The shrink disc consists of either one or two thrust rings with tapered bores and a mating tapered inner ring. By tightening locking screws the thrust rings are drawn together compressing the inner ring and applying pressure to the outside of the hub clamping it to the shaft. Being positioned around the hub there is only one interface transmitting the loads giving the shrink disc method distinct advantages such as offering the possibility of very concentric and well balanced connections that are suited to high speed applications. Traditional shrink fits require complicated calculations, close machining tolerances...

Standard series – this range is the most popular, being used in most applications. This new design of Shrink Disc is made from high alloy forged rings and is practically indestructible. Replacing the smaller 4071 design, these units are available from 14mm to 195mm bore. Characteristics Shrink discs are the modern method for creating a mechanical shrink fit. The shrink disc consists of either one or two thrust rings with tapered bores and a mating tapered inner ring. By tightening locking screws the thrust rings are drawn together compressing the inner ring and applying pressure to the outside of the hub clamping it to the shaft. Being positioned around the hub there is only one interface transmitting the loads giving the shrink disc method distinct advantages such as offering the possibility of very concentric and well balanced connections that are suited to high speed applications. Traditional shrink fits require complicated calculations, close machining tolerances and fine...

Reduced dimensions with lower transmission values – especially for applications with restricted space. As a split version, the SR series is able to offer greater mounting versatility on symmetrical hub designs or can also be used as half shrink discs for lower torque applications. Half shrink discs With half shrink discs HT/HC only 50% of stated T is transmitted. Type HT (Threaded holes in thrust ring) Type HC (Clearance holes in thrust ring) Characteristics Shrink discs are the modern method for creating a mechanical shrink fit. The shrink disc consists of either one or two thrust rings with tapered bores and a mating tapered inner ring. By tightening locking screws the thrust rings are drawn together compressing the inner ring and applying pressure to the outside of the hub clamping it to the shaft. Being positioned around the hub there is only one interface transmitting the loads giving the shrink disc method distinct advantages such as offering the possibility of very...

Simplified manufacture – only plain shaft and bore diameters with easily achieved surface finish and tolerances are required. Easy adjustability - Easy mounting - Easy removal - Low susceptibility to contamination - Highest reliability This product is available in the following configurations: SDA, SDB, SDC and SDD. Characteristics Shrink discs are the modern method for creating a mechanical shrink fit. The shrink disc consists of either one or two thrust rings with tapered bores and a mating tapered inner ring. By tightening locking screws the thrust rings are drawn together compressing the inner ring and applying pressure to the outside of the hub clamping it to the shaft. Being positioned around the hub there is only one interface transmitting the loads giving the shrink disc method distinct advantages such as offering the possibility of very concentric and well balanced connections that are suited to high speed applications. Traditional shrink fits require complicated...

Reduced dimensions with lower transmission values – especially for applications with restricted space. This light duty external locking device is the first in the Shrink Disc range and is useful for low to medium torque requirements. Characteristics Shrink discs are the modern method for creating a mechanical shrink fit. The shrink disc consists of either one or two thrust rings with tapered bores and a mating tapered inner ring. By tightening locking screws the thrust rings are drawn together compressing the inner ring and applying pressure to the outside of the hub clamping it to the shaft. Being positioned around the hub there is only one interface transmitting the loads giving the shrink disc method distinct advantages such as offering the possibility of very concentric and well balanced connections that are suited to high speed applications. Traditional shrink fits require complicated calculations, close machining tolerances and fine surface finishes, they also need...

The FemtoFiber ultra series is TOPTICA's third generation of ultrafast fiber lasers. These lasers provide powerful femtosecond pulses with a ultra-high reliability. The systems use SESAM-mode locked ring fiber oscillators (patented design), followed by a high-power fiber amplifier. For reaching highest reliability levels, only polarization-maintaining fibers are used. All of this is integrated in a unit with a footprint of 25 x 38 cm². The laser systems are easily controlled via Ethernet or USB. A simple graphics user interface (GUI) enables user-friendly access to all laser parameters.

The 3C Tri-Clamp connector is easy to use: Simply press the two flange-like connector pieces against each other and fasten them together using the locking clip. A sealing ring is situated between the connector pieces to maintain a proper seal. The resulting connection is form-fit and smooth and a wing nut on the locking clip makes it easy to quickly open and close the connection at any time. The Tri-Clamp connection can be combined with a 1+, 1A or 1C flexible tube connector, a 2N pipe connector or a male thread.

THE EFFICIENT SOLUTION FOR SMALL PRODUCTION SERIESAre you looking for a solution that is a more economical choice than a larger Trowal system? Then look no further than our E5 mini barrel. It is perfect for deburring and abrasion, above all on small workpieces from the optical and fine mechanics industries. The double-conically shaped rotating barrel body generates an intense rotation to achieve the perfect abrasion result. SOPHISTICATED TECHNOLOGY The mini barrel stands on a steel sheet construction with four pedestals. The barrel bodies are secured to a drive roller and support roller with locking rings. The barrel body is made from polyurethane and the quick-action cap is waterproof. SPECIAL EQUIPMENT It is also possible to attach two additional barrel bodies if necessary. These are driven via a roller system that is fully variable thanks to a three-phase motor. The cover can also be ordered with safety switches.

Clamp 124242 data of the Tension rings 40 x 1.5 mm, sendz. verzinkt, überlappte Ringenden Diameter 571 mm Application Rekonditioniertes Stahlfass

Clamp 123943 nach DIN 6644 data of the Tension rings 1.25 x 26 mm, DX 51 Diameter 360 mm Application Metalltrommel

Clamp 124151 data of the Tension rings 1.5 mm, verzinkt, überlappt Diameter 571 mm Application Metallfässer

Kunststoff-Deckelfass Standart-Deckelfass 120 l Clamp 124161 data of the Tension rings rostfrei, 4301, überlappt

Kunststoff-Deckelfass Standard-Deckelfass 120 l Clamp Ohne Nietgelenke data of the Tension rings Durchmesser 450 mm

Clamp - data of the Tension rings Spaltband: DX 51 am Ende 90 Grad geknickt, jeweils mit Bohrung Diameter 335 mm Application Industrie

Kunststoff-Deckelfass MK400 SN /120L und MK320 SN /60L Clamp Konstruktion: Ohne Nietgelenke 2 teilig einrastverbindung data of the Tension rings Material: PE-HDPE Band: PP