Natural hair - Import export

The oil is extracted from the pulp of the fruit, through an expeller pressing process, to obtain a filtered, crude oil (unrefined) and without additives. Rich in Omega 9, it helps maintain the hair's natural color and shine, strengthening the hair follicles. It can be use in formulas for the treatment of dandruff and to revitalize hair, increasing its resistance and recovery. Apply to the scalp and massage for five minutes, spreading it along the hair.

Kullen-Koti disc brushes can be supplied with various fill configurations. For example with compressed face, with narrow or large fill collars, with fill array in particular forms, either with normal vertical bristle bundles or with inclined bundles to all directions. We supply core material according to your application purpose, for example cores made of plastic qualities PP, PA, PE, POM or PVC as well as of wood or different steel and metal types. On request of big quantities it is worth to use moulded plastic cores. Almost all fill material qualities can be used, e.g. natural hairs and bristles, plant fibres, synthetic filaments and wires. We can supply disc brushes matched to your requirements with bore hole, thread or shaft for fitting in the machines.

For this brush type we use standardised vee-belt profiles, made of polyester elastomers and immune to moisture, oil and grease as well as resistant to numerous chemicals. Therefore an application is possible in a temperature range from -15°C to +80°C. They can be produced in all lenghts requested, open ended or endless closed belt. Mainly natural hairs and bristles, plant fibres and synthetic bristles (PA, PP, etc.) are used, so all kinds of brush surface - from very soft to very hard - can be obtained according to the material quality chosen. For the endless vee-belt brushes you normally have to use a belt pre-tension of 3% of the distance between the pulleys (a). In order to obtain this we recommend that an adjustment device (such as a slot) is used with an adjustment range of 5% of the distance between the pulleys (a). You can use standardised drive pulleys to drive the belt brushes.Please ensure the diameters of the deflection pulleys are correct in order to obtain an...

We can produce flat-belt brushes in any length requested, open ended or endless. They are mainly equipped with natural hairs or bristles, plant fibres or synthetic bristles. Depending on the fill material a brush surface from very soft to very hard can be obtained. As belt qualities we supply the multilayered types 5,8 mm or 7,0 mm (belt thickness) with a cover sheet and running surface made of chrome leather and an integrated polyamide insert. They are suitable for temperatures from -15°C to +80°C. When using endless closed belts, belt pre-tension is an important factor.For our types 4,8 mm to 9,5 mm we normally use a belt pre-tension of 1,5 to 2% of the distance between the pulleys (a). In order to obtain this we recommend that an adjustment device (such as a slot) is used with an adjustment range of 5% of the distance between the pulleys (a). Please ensure the diameters of the deflection pulleys (d) are correct in order to obtain an adequate looping of the belt. We advise you...

Toothed belt brushes from Kullen complement the belt brush range and offer one advantage in the feeding technique which the others do not: they can be set to a measurable cycle time. We only use standard toothed belts made of polyurethane with especially welded studs for fixing the fill material. The toothed belts are resistant against humidity, oils, greases and most chemicals. They can be used at temperatures between -15°C up to 80°C. Our experience shows that the required variations of toothed belt brushes are specific according to the customer's application and thus are normally produced ready to be installed as an endless unit. This brush type is available in common widths (KB) of standard toothed belts divided in T5, T10 and T20. The belt length depends on your requirements. You should always inform us about the inside belt length. The maximum belt speed is 6 m/s. Mainly natural hairs and bristles, plant fibres and synthetic bristles (PP, PA, etc.) are used, so all kinds of...

We offer you the following selection criterias: - All fill materials possible, e.g. natural bristles and hair, plant fibres and synthetic filaments. - As backing material we use galvanised steel and stainless steel (1.4301, 1.4571) tapes. - The same possibilities are available for the production of strip brushes in arch form however not only in semi circles but also in other pitch forms. The larger the dimensions the better multiple brush segments can be mounted around the perimeter. Besides the cup form the strip brush can be bent in any other form.

The strip brushes in cup form are also an all-purpose brush type. For special tasks we offer the dimensions from 20 mm to 1000 mm and through that cover a wide spectrum of applications. We provide you the following selection criterias: - All fill materials possible, e.g. natural bristles and hair, plant fibres and synthetic filaments. - As backing material we use galvanised steel-, stainless steel (1.4301, 1.4571) or brass tape. The same possibilities are available for the production of strip brushes in arch form, not only in semi circle form but also in any other pitch circle form. The larger the dimensions the better multiple brush segments can be mounted around the perimeter.

As you are able to receive the strip brush with the bristles facing outwards, it is no problem for Kullen-Koti to produce the same brushes with the bristles facing inwards. Even with these brushes you have a dimensional range that cannot be reached with any other brush construction. The strip brushes in arch form cannot only be produced in half circle form, but also in every other separation form (for example 45°). The larger the dimensions the better multiple brush segments can be mounted around the perimeter. All fill material, such as natural bristles and hair, plant fibres and synthetic filaments. Backing material made of galvanised steel-, stainless steel (1.4301, 1.4571) or brass tape.

Our special types of sealing brushes consist of 16 particular plastic profiles which we can supply in a comprehensive range of variations. The two constructions of sealing brushes are: Strip brush construction: that means our strip brushes with metal backing are mounted in plastic profiles. Punched brush construction: consisting of a solid plastic profile with bundle holes in which the fill material has been mechanically anchored. Depending on the fill material you can choose a fill density of high EA1, medium EA2 or low EA3. You can choose:- all fill types, e.g. natural bristles and hair, plant fibres, wires and synthetic filaments. - different trim heights (BH) (free bristle length) We can also supply all sealing brush types with fixing holes in the holding flanges, e.g. 22 available sizes of round holes and 13 sizes of elongated holes. Standard lengths are usually 1000 mm or 2000 mm. On request lengths of up to 5000 mm can be supplied, depending on the type of profile. Of...

Our special types consist of 10 types of strip brushes with metal backing widths from 1,8 mm to 13,5 mm, which we can produce in a large range of variations.You can choose:- All fill types, e.g. natural bristles and hair, plant fibres, wires and synthetic filaments. - The backing strip material made of galvanized steel, stainless steel (1.4301, 1.4571) or brass.- The trim height (BH) (free bristle length)- The overall length from a few centimeters to the maximum length which can be transported. The strip brush type 60 will mainly be mounted in half-rings with various numbers of grooves around the periphery and therefore used as a roller brush. The ring diameters are 80 mm, 100 mm and 102 mm. We can supply holders for fixing the strip brush type 25 and type 40.

Our sealing brushes are available in many forms and with a wide variety of profiles. These profiles can also be used as mounting flanges. The special types consist of 11 types of sealing brushes which we can produce in a large range of variations on your request. You can choose: - All fill types, e.g. natural bristles and hair, plant fibres, synthetic filaments and wires.- The quality of the backing material, e.g. galvanized steel, stainless steel (1.4301; 1.4571) or brass.- The trim height (BH) (free bristle length- The overall length from a few centimeters to the maximum length which can be transported. We also can supply all sealing brush types with fixing holes in the holding flanges, e.g. 22 available sizes of round holes and 13 sizes of elongated holes. Don't hesitate to ask us for other dimensions of fixing holes, too.

Kullen-Koti strip brushes with metal backing tape have a big advantage over other brush constructions with rigid plastic bodies. This is because they can be formed to ring brushes with a diameter of 12 mm and with a bore of 5 mm up to the biggest diameter of 2.000 mm with an inward diameter of 1.000 mm. The strip brushes in arch form cannot only be produced in half circle form, but also in every other separation form (for example 45°). The larger the dimensions the better multiple brush segments can be mounted around the perimeter. All fill material qualities are possible, e.g. natural bristles and hair, plant fibres and synthetic filaments. As backing material we use galvanised steel-, stainless steel- (1.4301, 1.4571) or brass band.

Dietary supplement made from specially developed collagen hydrolyzate plus calcium, magnesium and vitamin C. The amino acids contained in this special gelatine are natural components of your skin, hair, nails, bones, connective tissue and joint cartilages. Gelat-PLUS® is characterized by a very high bioavailability, which means that the collagen hydrolyzate is absorbed very well by the body. The composition of the amino acids corresponds to the compounds of collagen in human articular cartilage. Magnesium and calcium take a substantial part in the forming of the inorganic substance of bones and teeth. Magnesium supports normal functioning of the muscles, especially in sports and physical activity, and thus promotes the well-being - even at night - by relaxed muscles and calves. Vitamin C contributes to a normal formation of collagen for a normal, healthy function of bone and cartilage.

Food supplement made from specially developed collagen hydrolyzate plus calcium, magnesium and vitamin C. The amino acids contained in this special gelatine are natural components of your skin, hair, nails, bones, connective tissue and joint cartilages. Gelat-PLUS® is characterized by a very high bioavailability, which means that the collagen hydrolyzate is absorbed very well by the body. The composition of the amino acids corresponds to the compounds of collagen in human articular cartilage. Magnesium and calcium take a substantial part in the forming of the inorganic substance of bones and teeth. Magnesium supports normal functioning of the muscles, especially in sports and physical activity, and thus promotes the well-being - even at night - by relaxed muscles and calves. Vitamin C contributes to a normal formation of collagen for a normal, healthy function of bone and cartilage.

Dietary supplement made from specially developed collagen hydrolyzate plus calcium, magnesium and vitamin C. The amino acids contained in this special gelatine are natural components of your skin, hair, nails, bones, connective tissue and joint cartilages. Gelat-PLUS® is characterized by a very high bioavailability, which means that the collagen hydrolyzate is absorbed very well by the body. The composition of the amino acids corresponds to the compounds of collagen in human articular cartilage. Magnesium and calcium take a substantial part in the forming of the inorganic substance of bones and teeth. Magnesium supports normal functioning of the muscles, especially in sports and physical activity, and thus promotes the well-being - even at night - by relaxed muscles and calves. Vitamin C contributes to a normal formation of collagen for a normal, healthy function of bone and cartilage.

Food supplement made from specially developed collagen hydrolysate plus calcium, magnesium and vitamin C. The amino acids contained in this special gelatin are natural components of your skin, hair, nails, bones, connective tissue and joint cartilages. Gelat-PLUS® is characterized by a very high bioavailability, which means that the collagen hydrolyzate is absorbed very well by the body. The composition of the amino acids corresponds to the compounds of collagen in human articular cartilage. Magnesium and calcium take a substantial part in the forming of the inorganic substance of bones and teeth. Magnesium supports normal functioning of the muscles, especially in sports and physical activity and thus promotes the well-being - even at night - by relaxed muscles and calves. Vitamin C contributes to a normal formation of collagen for a normal, healthy function of bone and cartilage.

If you are already taking calcium and magnesium in a different form, we recommend Gelatine "Gold extra". Gelatin "Gold extra" contains a specially developed collagen hydrolyzate that is excellently absorbed by the body. The amino acids contained in the collagen hydrolyzate are natural components of skin, hair, nails, bones, connective tissue and joint cartilage. We recommend a regular intake for at least six months.