Zinc-nickel - Import export

screws: nickel plates brass*zinc diecasting*for rods up to 16 mm Ø

zinc diecasting*nickel plated*vinyl coated handles*width of mouth 59 mm

zinc diecasting, nickel plated*vinyl coated jaws*capacity 0 – 40 mm

zinc diecasting, nickel plated*vinyl coated jaws*capacity 0 – 40 mm

zinc diecasting*cork lined jaws*capacity 0 – 80 mm*rod Ø 10 mm

zinc diecasting, nickel plated*for tubes up to 30 mm Ø*with wheel made from*hard metal

zinc diecasting*and brass,*nickel plated*vinyl coated jaws*length 300 mm

steel, 8 mm Ø*zinc plated*three point support*nickel plated brass screw

screws: nickel plated steel*zinc diecasting*for rods up to 16 mm Ø

zinc diecasting*and brass,*nickel plated*vinyl coated jaws*length 300 mm*safety base*Ø 82 mm

Turned parts Long turned partes, small turned parts Turned, milled and grinded parts Thread inserts in brass, steel and stainless steel Possible materials: Alloy AlCuMgPb, AlZn5,5MgCu etc. Brass CuZn39Pb3, CuZn40Pb2 etc. Stainless steel 1.4301, 1.4305, 1.4571, 1.4401, 1.4101 etc. Steel Machining steel, St52, St37, C45, etc. Special steels Titan, Hastelloy, Copper, Bronze etc. Surface treatments may be done as follows: Galvanizing, nickel, brown, hot-dip galvanizing, phosphating, anodizing, chrome plating, painting, powder coating, plasma coating, sandblasting, Tuflok coatings. All common surfaces as VDA standard are possible (zinc-nickel, zinc flake). Heat treatments such as Plasma / gas nitriding, carbonitriding, hardening, carburizing, vacuum hardening, tempering etc.

Material Schulz Stanztechnik manufacturers these axial ball bearings using the materials suited to the specific application. For the housing, steel, brass or stainless steel are used; for rings, steel or stainless steel which is always hardened. The balls are made of chrome or stainless steel, which is also always hardened. All material combinations – depending on their conditions of use – are possible for the assembly of the individual parts. Various surface coats for the individual parts can be supplied as well as finished bearings: brass which is uncoated or nickel plated; steel and stainless steel which is uncoated, zinc plated or nickel plated. All bearings are available lubricated or unlubricated. Structure DLG100 axial ball bearings consist of sheet metal housing, two hardened rings as well as hardened precision balls. Due to their structure, we refer to them as an encapsulated, full ball design.

To fasten components to profiles, brakes the anodized coat of the profile - thus ensuring a safe, electrically conductive connection Material: — Steel — Stainless steel — Plastic PA Measures: Thread: M4 - M8 length hammer screw: 16-60 mm many different versions in lengths and widths in the delivery assortment individual designs on request extras: Rotation aid: polyamide spot coating on request surface: with dry sliding film, zinc-nickel or zinc-flake coating on request Note: Matching flange nut available

CONEC has developed an ODVA compatible IP67 Fiber Optic connection for harsh indoor and outdoor environment. The new system is a bayonet locking enclosure with integrated LC Duplex Connectors and Adapters. The bayonet locking enclosure provides an easy and secured connection also under adverse conditions. The available materials for the housings are plastic, plastic metallized or nickel plated zinc die-cast for extreme harsh conditions. The LC connections are available for single mode or multimode transmission, depending on the requirements of the operated system. The major application for these connectors are connections from base stations to the transmission modules based on antenna poles or for network connections on the last mile into end users homes. This program is supplemented by preassembled patch cables in various lengths.

Material Carbon Steel Surface Finishing Zinc-Nickel Standard Seal Material(s) NBR (Buna-N®) Working Temperature -25° C ... +100° C / -13° F ... +212° F Valve Design Poppet Valve Connection Screw Disconnection Screw Connect Under Pressure not allowed Application Industrial Hydraulic ISO Interchange -

Material Carbon Steel Surface Finishing Zinc-Nickel Standard Seal Material(s) NBR (Buna-N®), PU Working Temperature -25° C ... +100° C / -13° F ... +212° F Valve Design Ball Valve Connection Screw Disconnection Screw Connect Under Pressure not allowed Application Industrial Hydraulic, Rescue and Tensioning Hydraulics ISO Interchange ISO 14540

Material Carbon Steel Surface Finishing Zinc-Nickel Standard Seal Material(s) NBR (Buna-N®), PTFE Working Temperature -20° C ... +100° C / -4° F ... +212° F Valve Design Flat Valve Connection Screw Disconnection Screw Connect Under Pressure not allowed Application Construction Machinery ISO Interchange -

Material Carbon Steel Surface Finishing Zinc-Nickel Standard Seal Material(s) NBR (Buna-N®), PTFE Working Temperature -25° C ... +100° C / -13° F ... +212° F Valve Design Flat Face Connection Push and actuate Push Sleeve Disconnection Actuate Push Sleeve Connect Under Pressure not allowed Application Agricultural and Forestry Machinery ISO Interchange ISO 5676

Material Carbon Steel Surface Finishing Zinc-Nickel Standard Seal Material(s) NBR (Buna-N®) Working Temperature -25° C ... +100° C / -13° F ... +212° F Valve Design Poppet Valve Connection Push and actuate Push Sleeve Disconnection Actuate Push Sleeve Connect Under Pressure not allowed Application Industrial Hydraulic ISO Interchange -

Material Carbon Steel Surface Finishing Zinc-Nickel Standard Seal Material(s) NBR (Buna-N®) Working Temperature -25° C ... +100° C / -13° F ... +212° F Valve Design Poppet Valve Connection Push and actuate Push Sleeve Disconnection Actuate Push Sleeve Connect Under Pressure not allowed Application Industrial Hydraulic ISO Interchange ISO 7241-1, Series B

Material Carbon Steel Surface Finishing Zinc-Nickel Standard Seal Material(s) NBR (Buna-N®) Working Temperature -25° C ... +100° C / -13° F ... +212° F Valve Design Poppet Valve Connection Push and actuate Push Sleeve Disconnection Actuate Push Sleeve Connect Under Pressure not allowed Application Agricultural and Forestry Machinery ISO Interchange ISO 7241-1, Series A

Material Carbon Steel Surface Finishing Zinc-Nickel Standard Seal Material(s) NBR (Buna-N®), PTFE, PU Working Temperature -25° C ... +100° C / -13° F ... +212° F Valve Design Flat Face Connection Push Disconnection Actuate Push Sleeve Connect Under Pressure Male Tip Series FU up to the max. Working Pressure allowed Application Construction Machinery, Industrial Hydraulic ISO Interchange ISO 16028

Material Carbon Steel Surface Finishing Zinc-Nickel Standard Seal Material(s) NBR (Buna-N®) Working Temperature -25° C ... +100° C / -13° F ... +212° F Valve Design Poppet Valve Connection Screw Disconnection Screw Connect Under Pressure Male Tip and Female Body allowed Application Industrial Hydraulic, Rescue and Tensioning Hydraulics ISO Interchange -

Material Carbon Steel Surface Finishing Zinc-Nickel Standard Seal Material(s) HNBR, FKM (Viton®), PTFE Working Temperature -20° C ... +100° C / -4° F ... +212° F Valve Design Poppet Valve Connection Screw Disconnection Screw Connect Under Pressure not allowed Application Construction Machinery ISO Interchange -

Material Carbon Steel Surface Finishing Zinc-Nickel Standard Seal Material(s) NBR (Buna-N®), PTFE Working Temperature -25° C ... +100° C / -13° F ... +212° F Valve Design Flat Face Connection Screw Disconnection Screw Connect Under Pressure Male Tip up to the max. Working Pressure allowed Application Construction Machinery, Industrial Hydraulic ISO Interchange -

Adjustable Gauge Fitting EMV ▪ Fixed mounting of a pressure gauge without a test coupling ina existing port connection Materials - Metal parts made of: ▪ Steel, zinc/nickel-plated = C6F (CrVI-free) ▪ Stainless Steel V2A (1.4305 / AISI 303) or V4A (1.4571 / AISI 316Ti) on request Sealings made of: ▪ P = NBR (Buna-N®) or V = FPM (Viton®) Gauge Adaptor SMA Direct Gauge Adaptor SMD

Description The multi-coupling has been created for connecting and disconnecting several hydraulic lines at the same time. This is done by an operating lever the guide crank of which is designed for a minimum of operating force. The connection of the hydraulic lines is done with flat face couplings. Due to the secial sealing it is possible to couple against trapped pressure on the male halves (max. 4x100 bar/ 5802 PSI) The main features of the multi coupling are: · Safety against commutability of hydraulic lines · Quick connecting · Coupling against trapped pressure · Optimally minimized leakage during coupling process Working Pressure 250 bar / 25 MPa / 3626 PSI Material Steel Surface Finishing Zinc-Nickel Standard Seal Material(s) NBR (Buna-N®), PTFE, PU

Material Carbon Steel Surface Finishing Zinc-Nickel, Zinc-Plating and Thick-Film-Passivation (Chrome III) Standard Seal Material(s) NBR (Buna-N®), PTFE Working Temperature -25° C ... +100° C / -13° F ... +212° F Valve Design Poppet Valve Connection Push (When mounting the Sleeve in Bulkhead), Push and actuate Push-Pull Sleeve Disconnection Pull (When mounting the Sleeve in Bulkhead), Actuate Push-Pull Sleeve Connect Under Pressure Male Tip Series HU up to the max. Working Pressure allowed Application Agricultural and Forestry Machinery ISO Interchange ISO 7241-1 A and ISO 5675 (for selected sizes)

Material Carbon Steel Surface Finishing Zinc-Nickel, Zinc-Plating and Thick-Film-Passivation (Chrome III) Standard Seal Material(s) NBR (Buna-N®), PTFE Working Temperature -25° C ... +100° C / -13° F ... +212° F Valve Design Poppet Valve Connection Push (When mounting the Sleeve in Bulkhead), Push and actuate Push-Pull Sleeve Disconnection Pull (When mounting the Sleeve in Bulkhead), Actuate Push-Pull Sleeve Connect Under Pressure not allowed (Male Tip Series HU up to the max. Working Pressure allowed) Application Agricultural and Forestry Machinery ISO Interchange ISO 7241-1 A and ISO 5675 (for selected sizes)