Zinc-nickel - Import export

"The zinc-nickel process has developed in recent years into a process providing one of the most efficient coatings in surface refinement, and is primarily used where high corrosion resistance at a high temperature load is required. Zinc-nickel alloys with 12-16% nickel content are very temperature-resistant, the higher level of hardness compared to the normal zinc coatings is also a very important property, since the risk of damage is lower. The process is related to the conventional alkaline zinc method, but has excellent durability even without post-treatment. This process is suitable for both barrel and rack goods."

screws: nickel plates brass*zinc diecasting*for rods up to 16 mm Ø

"The zinc-nickel process has developed in recent years into a process providing one of the most efficient coatings in surface refinement, and is primarily used where high corrosion resistance at a high temperature load is required. Zinc-nickel alloys with 12-16% nickel content are very temperature-resistant, the higher level of hardness compared to the normal zinc coatings is also a very important property, since the risk of damage is lower. The process is related to the conventional alkaline zinc method, but has excellent durability even without post-treatment. This process is suitable for both barrel and rack goods."

zinc diecasting*nickel plated*vinyl coated handles*width of mouth 59 mm

zinc diecasting, nickel plated*vinyl coated jaws*capacity 0 – 40 mm

zinc diecasting, nickel plated*vinyl coated jaws*capacity 0 – 40 mm

zinc diecasting*cork lined jaws*capacity 0 – 80 mm*rod Ø 10 mm

zinc diecasting, nickel plated*for tubes up to 30 mm Ø*with wheel made from*hard metal

zinc diecasting*and brass,*nickel plated*vinyl coated jaws*length 300 mm

steel, 8 mm Ø*zinc plated*three point support*nickel plated brass screw

screws: nickel plated steel*zinc diecasting*for rods up to 16 mm Ø

"In this method, a process on the surface of zinc, zinc-iron or zinc-nickel produces a defined thin and durable passivation coating, which enhances corrosion resistance. The different passivation processes differ with regard to corrosion protection, appearance, coating thickness and colouring. Often the passivation processes are additionally enhanced by seals (topcoats). These topcoats not only provide even greater corrosion protection, but also provide a more uniform appearance. The topcoats are adjustable to define the friction properties. Passivation processes are provided exclusively chrome-6 free."

zinc diecasting*and brass,*nickel plated*vinyl coated jaws*length 300 mm*safety base*Ø 82 mm

Turned parts Long turned partes, small turned parts Turned, milled and grinded parts Thread inserts in brass, steel and stainless steel Possible materials: Alloy AlCuMgPb, AlZn5,5MgCu etc. Brass CuZn39Pb3, CuZn40Pb2 etc. Stainless steel 1.4301, 1.4305, 1.4571, 1.4401, 1.4101 etc. Steel Machining steel, St52, St37, C45, etc. Special steels Titan, Hastelloy, Copper, Bronze etc. Surface treatments may be done as follows: Galvanizing, nickel, brown, hot-dip galvanizing, phosphating, anodizing, chrome plating, painting, powder coating, plasma coating, sandblasting, Tuflok coatings. All common surfaces as VDA standard are possible (zinc-nickel, zinc flake). Heat treatments such as Plasma / gas nitriding, carbonitriding, hardening, carburizing, vacuum hardening, tempering etc.

Material Schulz Stanztechnik manufacturers these axial ball bearings using the materials suited to the specific application. For the housing, steel, brass or stainless steel are used; for rings, steel or stainless steel which is always hardened. The balls are made of chrome or stainless steel, which is also always hardened. All material combinations – depending on their conditions of use – are possible for the assembly of the individual parts. Various surface coats for the individual parts can be supplied as well as finished bearings: brass which is uncoated or nickel plated; steel and stainless steel which is uncoated, zinc plated or nickel plated. All bearings are available lubricated or unlubricated. Structure DLG100 axial ball bearings consist of sheet metal housing, two hardened rings as well as hardened precision balls. Due to their structure, we refer to them as an encapsulated, full ball design.

The HONSEL RIVET NUT "headless" can be used in existing and new applications. The blind rivet nut can be flush mounted in smooth bores without countersinking. The omission of the "countersink" process of the hole realizes enormous potential for savings. Due to the 0 mm protrusion, components can be mounted without interfering edges or slide over one another without obstruction. Advantages: — Flush mount in smooth bores — No countersink required — Protrusion 0 mm — No interfering edges — High-quality corrosion protection (zinc-nickel) with 720 h salt spray test resistance

To fasten components to profiles, brakes the anodized coat of the profile - thus ensuring a safe, electrically conductive connection Material: — Steel — Stainless steel — Plastic PA Measures: Thread: M4 - M8 length hammer screw: 16-60 mm many different versions in lengths and widths in the delivery assortment individual designs on request extras: Rotation aid: polyamide spot coating on request surface: with dry sliding film, zinc-nickel or zinc-flake coating on request Note: Matching flange nut available

Material Carbon Steel Surface Finishing Zinc-Nickel Standard Seal Material(s) NBR (Buna-N®) Working Temperature -25° C ... +100° C / -13° F ... +212° F Valve Design Poppet Valve Connection Screw Disconnection Screw Connect Under Pressure not allowed Application Industrial Hydraulic ISO Interchange -

Material Carbon Steel Surface Finishing Zinc-Nickel Standard Seal Material(s) NBR (Buna-N®), PU Working Temperature -25° C ... +100° C / -13° F ... +212° F Valve Design Ball Valve Connection Screw Disconnection Screw Connect Under Pressure not allowed Application Industrial Hydraulic, Rescue and Tensioning Hydraulics ISO Interchange ISO 14540

Material Carbon Steel Surface Finishing Zinc-Nickel Standard Seal Material(s) NBR (Buna-N®), PTFE Working Temperature -20° C ... +100° C / -4° F ... +212° F Valve Design Flat Valve Connection Screw Disconnection Screw Connect Under Pressure not allowed Application Construction Machinery ISO Interchange -

Material Carbon Steel Surface Finishing Zinc-Nickel Standard Seal Material(s) NBR (Buna-N®) Working Temperature -40° C ... +106° C / -40° F ... +223° F Valve Design Poppet Valve Connection Push Disconnection Actuate Push Sleeve Connect Under Pressure Male Tip/Female Body Application Construction Machinery, Industrial Hydraulic ISO Interchange -

Material Carbon Steel Surface Finishing Zinc-Nickel Standard Seal Material(s) NBR (Buna-N®), PTFE Working Temperature -25° C ... +100° C / -13° F ... +212° F Valve Design Flat Face Connection Push and actuate Push Sleeve Disconnection Actuate Push Sleeve Connect Under Pressure not allowed Application Agricultural and Forestry Machinery ISO Interchange ISO 5676

Material Carbon Steel Surface Finishing Zinc-Nickel Standard Seal Material(s) NBR (Buna-N®) Working Temperature -25° C ... +100° C / -13° F ... +212° F Valve Design Poppet Valve Connection Push and actuate Push Sleeve Disconnection Actuate Push Sleeve Connect Under Pressure not allowed Application Industrial Hydraulic ISO Interchange -

Material Carbon Steel Surface Finishing Zinc-Nickel Standard Seal Material(s) NBR (Buna-N®) Working Temperature -25° C ... +100° C / -13° F ... +212° F Valve Design Poppet Valve Connection Push and actuate Push Sleeve Disconnection Actuate Push Sleeve Connect Under Pressure not allowed Application Industrial Hydraulic ISO Interchange ISO 7241-1, Series B

Material Carbon Steel Surface Finishing Zinc-Nickel Standard Seal Material(s) NBR (Buna-N®) Working Temperature -25° C ... +100° C / -13° F ... +212° F Valve Design Poppet Valve Connection Push and actuate Push Sleeve Disconnection Actuate Push Sleeve Connect Under Pressure not allowed Application Agricultural and Forestry Machinery ISO Interchange ISO 7241-1, Series A

Material Carbon Steel Surface Finishing Zinc-Nickel Standard Seal Material(s) NBR (Buna-N®) Working Temperature -25° C ... +100° C / -13° F ... +212° F Valve Design Poppet Valve Connection Screw Disconnection Screw Connect Under Pressure Male Tip and Female Body allowed Application Industrial Hydraulic, Rescue and Tensioning Hydraulics ISO Interchange -

Material Carbon Steel Surface Finishing Zinc-Nickel Standard Seal Material(s) HNBR, FKM (Viton®), PTFE Working Temperature -20° C ... +100° C / -4° F ... +212° F Valve Design Poppet Valve Connection Screw Disconnection Screw Connect Under Pressure not allowed Application Construction Machinery ISO Interchange -

Material Carbon Steel Surface Finishing Zinc-Nickel Standard Seal Material(s) NBR (Buna-N®), PTFE Working Temperature -25° C ... +100° C / -13° F ... +212° F Valve Design Flat Face Connection Screw Disconnection Screw Connect Under Pressure Male Tip up to the max. Working Pressure allowed Application Construction Machinery, Industrial Hydraulic ISO Interchange -

Adjustable Gauge Fitting EMV ▪ Fixed mounting of a pressure gauge without a test coupling ina existing port connection Materials - Metal parts made of: ▪ Steel, zinc/nickel-plated = C6F (CrVI-free) ▪ Stainless Steel V2A (1.4305 / AISI 303) or V4A (1.4571 / AISI 316Ti) on request Sealings made of: ▪ P = NBR (Buna-N®) or V = FPM (Viton®) Gauge Adaptor SMA Direct Gauge Adaptor SMD