Granulation - Import export

Dry, round, dust-free and free flowing shot sleeve- and plunger lubricant Type Wax with a micro-milled graphite content of 18 - 20 % Appearence black, round Sizes 0,5 - 1,0 mm 1,0 - 1,6 mm 1,6 - 2,0 mm Properties and Advantages • approved on all sizes of plungers • anti-static and dust-free • instant melting • capillary action guarantees optimal lubrication • minimal dosing is highly recommended • reliable and precise dosing is guaranteed when using Tribo-Chemie Beads Dispenser 3D

The pinch valve is non sensitive by contaminated, granulated, viscous, doughy and aggressive media. Furthermore it is (depending on the tube material) suitable for sanitary and aseptic applications because of the FDA approval.

The pneumatice pinch valve with its integrated positioner is non sensitive by contaminated, granulated, viscous, doughy and aggressive media. Furthermore it is (depending on the tube material) suitable for sanitary and aseptic applications because of the FDA approval.

FLAME RETARDANT FOR PLASTICS

FAST-FUSING PLASTICIZERS

INTRODUCING NEWOSTAT® INTERNAL AND EXTERNAL ANTISTATS FOR PLASTIC Everybody is familiar with electrostatic discharge. It becomes visible, and especially perceptible, when walking over a nonconductive floor, then touching a door handle and getting “a shock.” Such discharges are not only unpleasant, but in many sectors are even dangerous. Antistatic agents are used to avoid this problem and thus make both the manufacture and the use of plastic products safer. However, antistats can also contribute an additional positive effect. With NEWOSTAT® antistatic agents, the tendency of many plastics to attract dirt can be markedly reduced.

In many plastic systems, such as elastic PVC floor coverings, a wide variety of Incorporated inorganic fillers. However, these inorganic additives do not show any significant tendency to be incorporated into the liquid constituents of a plastisol. Without suitable additives, this is practically impossible. Provides for an optimal distribution of the filler NEWOS for the process step of dispersing innovative and market-proven process aids under the name NEWOTEC.

INTRODUCING NEWOLAN® NEWOLAN®- rheology additives – Products that make coating easier Many important plastics accrue during manufacture as fine particulate powders. It is often difficult to produce sheeting from them on a supporting material for example for floor coverings. Therefore, before mechanical shaping as a surface can occur, these powders must first be converted into a flowable or spreadable paste with a fluid medium. Such pastes are called plastisols. In the process, rheology additives optimally adapt the flow behavior (rheology) of the PVC pastes to the process parameters during sheeting manufacture. Under the brand name NEWOLAN®, NEWOS offers innovative and market-tested rheology additives that can be optimized to your requirements at any time.

Dry, dust-free, spherical, free-flowing shot sleeve lubricant Type Wax with a micro-milled graphite content of 10 % Appearence black, round Sizes 0,5 - 1,0 mm Properties and Advantages • same properties as Isolat® 80 G, but with reduced graphite content

HELIO®Clean 3 is a combined conveying-/ mixing-/ and dedusting device for virgin material and regrind. The dust is removed through a 3-stage dedusting system with ionisized air. The compact design makes it ideal for mounting on the feed zone of the processing machine or on a drying container. Available in 1- or 2-component version, filling is carried out by the integrated compressed air conveying technology with Venturi suction lance(s). Dedusting capacity up to 25 kg/h. Quality: Dust in granules causes lowered mechanical properties of technical plastic resins, leads to problems with surface finish in case of transparent parts, to high rate of rejects basing on smudges or white/black dots in transparent injection moulding parts like for example optical lenses of PC and PMMA. Professional cleaning of resins brings the quality to the original state again and optically perfect parts can be produced.

The HELIO®MAT dryer station is part of the JETBOXX® system and features an independent JETBOXX® dryer with full functionality at each individual docking station. The material can be predried in removable drying containers at the dryer station. The drying container can be removed and brought to the processing machine if needed. It will be attached directly onto the feeding section there and the dried material can be processed. If the material should be kept dry on the machine, a JETBOXX® docking plate with dryer control are used in addition. HELIO®MAT is applicable for example as pre-drying station for quick material change, as dryer station for sampling batches, for batch drying for small quantities / sampling, for laboratory applications, or for cleanroom supply with hermetically sealed dry material containers. Material change without delay. No humidification. No cleaning issues.

Mobile plastic granules dryers from the JETBOXX® system are available with a volume of 30/50/75/200 litres and can be optimally adapted to your requirements with a large number of options. They can be used anywhere, where top-mounted dryers fail because of weight / or space reasons, and flexibility is required. When changing the setting of task, the components can be combined easily or used for example as top-mounted dryers. The compressed air-based dryers are maintenance-free and provide professional functions such as: plastic-specific and throughput dependent dryer settings, database for plastics, conveying control, week timer, overheating protection, dew point measurement, speed dial programs, personal programs, and many more.

The JETBOXX® mini top-mounted dryers are particularly applicable where small material flow rates with the highest drying precision are required. Due to their compact design, the plastic granulate dryers can be mounted on the feed section of the injection molding machine without any difficulty. The dryers are available with a volume of 0,5/1,0/2,5/5/6/12/18 litres and can be optimally adapted to your requirements with a large number of options from the JETBOXX® system. Compressed air conveyors of one or two components with or without dedusting function are available. Filling by hand is also possible via hinged covers. The compressed air-based dryers are maintenance-free and provide professional functions such as: plastic-specific and throughput dependent dryer settings, database for plastics, conveying control, week timer, overheating protection, dew point measurement, speed dial programs, personal programs, and many more.

HELIO®Clean 2 is a combined conveying-/ mixing-/ and dedusting device for virgin material and regrind. The dust is removed through a 2-stage dedusting system. The compact design makes it ideal for mounting on the feed zone of the processing machine or on a drying container. The separated dust content is sucked out into an external collection bin. Available in 1- or 2-component version, filling is carried out by the integrated compressed air conveying technology with Venturi suction lance(s). Quality: Dust in granules causes lowered mechanical properties of technical plastic resins, leads to problems with surface finish in case of transparent parts, to high rate of rejects basing on smudges or white/black dots in transparent injection moulding parts like for example optical lenses of PC and PMMA. Professional cleaning of resins brings the quality to the original state again and optically perfect parts can be produced.

JETBOXX® plastic granulate dryers are compressed air based dry-air dryers for mounting directly on the feed section of the processing machine. The JETBOXX® technology guarantees perfect drying results thanks to plastic-specific and throughput-dependent dryer settings. The dryers are available with a volume of 30/50/75 litres and can be optimally adapted to your requirements with a large number of options from the JETBOXX® system. The JETBOXX® control provides a database for plastics, conveying control, week timer, fully automatic decrease and resume of the drying intensity when production is interrupted (overheating protection), automatic restart with preheating program in 1- or 2 shift operation, dew point measurement, speed dial programs, personal programs, and many more. Compressed air conveyors of one or two components with or without dedusting function are available. The conveying control is already included.

Aero carb is loose granules of activated carbon. This comes in loose form and are used as a blending option for treating various VOCs. They are supplied in 4mm pellet form or in different mesh sizes as per customer requirement. Impregnation of various elements onto this is also done to treat special gases.