Smart cards - Import export

Cherry ST-1144 SmartTerminal SmartCard Leser light grey (ST-1144UB)

Fast, safe and convenient car parking. Faster parking for added flexibility Parking spaces are in short supply! When space for access ramps becomes an issue, we provide the optimal solution. The hydraulic car elevator TRAFFICO transports both car and passengers quickly and reliably to the desired parking level. A wide selection of options is offered for this classic car lift to meet individual requirements. Convenience important? The most convenient way to initiate operation is by remote control or smart card. The reader can be installed next to the lift entrance on a pedestal, for example, with pull wire switches at each level. Light beams between the cabin and shaft doors avoid any damage to the car during entry and exit. Light barriers facilitate vehicle positioning, thereby speeding up access. In the case of systems with two stopping points, the journey to the other level commences automatically as soon as the vehicle is positioned correctly.

Pressure on price and quality continue to rise. The need to monitor even the simplest manufacturing and assembly process is increasingly common. With 100% monitoring of force/ time curves or force displacement/time curves, the Force- Master satisfies all requirements for ensuring the reliability of even simple press-fit processes. Thanks to its ultra-simple, single-button operation and intelligent auto-configuration, even semi-skilled staff can set up the equipment safely and quickly. "Card & Go" is the smart system that uses master, tool and PLC smart cards to make equipment settings, inhibit unauthorized changes and to trigger actions in sequence with the production process. The ForceMaster 9110 has been developed specifically for monitoring manual lever presses. Simple manual workstations can be monitored extremely efficiently using the ForceMaster. Easy control functions that used to require an additional PLC can now be performed reliably with the ForceMaster.

Advanced customer expectations, strong market dynamics, new security threats, and cost pressure require new levels of efficiency and economy in card personalisation. The Pearl ID delivers the reliability, flexibility, security, and profitability to meet your specific needs in centralised card personalisation. With a throughput of up to 3,300 cards/hour, it is the ideal system for the high-speed production of ID cards, driver’s licences, health cards, payment cards, commercial cards, and other smart cards. You can choose from a comprehensive range of technologies, depending upon your personalisation requirements, production volumes, and growth objectives. The Pearl ID is supplied as tailor-made solution with automated inline quality control, and enables to combine laser engraving, industrial inkjet printing, security lamination, smart card encoding, and other technologies. Different laser systems for marking and optical personalisation can be integrated, with up to six laser heads...

Get a higher level of automation and increased efficiency, without compromising quality and precision. Our affordable and proven solutions, ranging from encapsulation, testing and encoding of chip modules to glue tape lamination, provide the speed, quality and economy for profitable chip module production. RFID Inlay Production Wire embedded antennas produced on ruhlamat machines are extremely cheap and yet provide the best product characteristics compared to etched or plated antennas. Our reliable machine solutions offer great flexibility and productivity, enabling you to make both prototypes and mass products in an economical way and with consistently high quality. From antenna embedding to production of complete RFID inlays and eCovers, the options are versatile. Card Personalisation We excel in providing innovative card personalisation solutions. Our system enables you to produce highly personalised smart cards, secure IDs, and financial cards quickly and economically. We...

The BT110-4 bending tester is designed to perform dynamic bending stress tests with ID-1 cards, particularly smart cards. This dedicated test system enables to bend the cards along the short axis or the long axis. In each direction 5 cards can be processed simultaneously. The purpose of this test is to determine any adverse mechanical or electrical effects arising from repeated application of bending stress to card test samples. The affordably priced BT110-4 bending test system is perfect for quality assurance in card production and for card testing in laboratories. It will help in the card prototype stage to ensure that the product to be built meets the expectations of the customer. And as part of an ongoing quality assurance program, the system ensures in the production that the cards continue to meet the established durability test standards. Many cards aren’t performing as they should. Make sure the cards you produce and issue work every time. Optional shortened bending test...

Permanent fixation of a chip module is crucial for every smart card to meet the different demands of ID cards, banking cards, GSM /SIM cards, and dual interface cards. The GTL700 is a highly reliable and flexible solution for glue tape lamination of chip module tapes in preparation for the hot melt implanting process. The glue tape is laminated onto the backside of the module tape. To accommodate the chip, holes are punched into the glue tape prior to lamination. The system operates stand-alone or inline, and is suitable for a wide range of IC module tapes. Various punching and laminating tools are available, which can be exchanged with a few simple steps. Optional reel units allow use of an additional protection tape and separation of carrier tape. Highest yield, maximum machine uptime and short product changeover times lead to very low cost of ownership Up to 8,000 chip modules/hour High flexibility for all IC module types and sizes, including dual interface Adjustable...

The PowerTest is a sophisticated testing and encoding system for chip modules on 35 mm tapes. Maximum flexibility allows versatile use: It can be used by card manufacturers for the incoming inspection or encoding of chip module tapes, and with integrated disconnect station by module tape manufacturers as a quality measurement system for the inspection of outgoing goods. Testing of contact, contactless and Dual Interface IC modules can be executed with the highest performance and yield by processing of up to 128 modules in parallel. In addition to basic test and parameter test, software is also available for chip module initialisation, personalisation, and OS loading. Integration of SAM, HSM, or similar modules can be realised easily. Using high-end reader technology from Smartware or Micropross, this automatic IC module test handler offers unmatched performance for the complete production test of smart card and RFID modules. Flexible reel to reel system for high-speed test,...

Encapsulation is the method for protecting the chip and wires against mechanical stress and environmental influences. For this purpose, cast resin is dispensed and then cured by UV light or heat, depending on the type of resin. The PowerSeal offers highest quality and maximum speed for the encapsulation of chip modules with up to 40,000 modules/hour. PowerTest - Chip Module Test System The inspection of IC modules for smart cards and RFID devices, based on parametric and functional testing, is an integral part in the production flow and quality assurance. The PowerTest is designed for high-speed testing and encoding of chip modules on 35 mm tapes. The system is also perfectly suited for initialisation and personalisation of IC modules, including OS loading. GTL700 - Glue Tape Lamination System The GTL700 is a highly reliable and flexible system for glue tape lamination of chip module tapes in preparation for the hot melt implanting process. The very efficient system can...

High Quality Plastic Cards for All Card Printers Our Cards quality goes even further to protect your printer and ensure optimum printing by shrink wrapping cards in packs of 100. Order in multiples of 500 and your cards are packaged in white trays for an extra protection. We stock ID cards in all the popular sizes CR80, CR79 and CR100 (10-55mil). Plastic Cards available in: •Plain white 30mil CR80 cards •Plain white 20mil CR80 cards •Plain white 10mil CR80 cards •Over 17 CR80 coloured cards including black, metallic silver, gold •Available with or without magnetic stripe/signature panel •Key tag cards •Adhesive cards (paper and Mylar backed) Besides Plain White and Coloured cards we supply as well MIFARE Cards, Proximity Cards, Smart and Contactless Cards.

The XTP 804 is designed for high quality printing of single tags, tickets and blister cards based on the NOVEXX Solutions 64-series print module. Equipped with a high performance thermal direct/thermal transfer printer with 4" print width the XTP 804 is the perfect solution to meet today’s high standards of product identification with single tags. As the XTP 804 can be used for various materials, designs, sizes and thicknesses, the application area is wide, for example in the following industries: • Food (e.g. product information cards) • Automotive (e.g. blister cards for small spare parts) • Electronics (e.g. blister cards for battery components, smart cards) • Ap parel (e.g. hang tags, decorative labels, brand tags) • Pharma (e.g. blister cards for pills, dressing material) • Retail (e.g. price tickets, shelf labeling cards)