Adhesives - Import export

This label solution ensures a high quality brand image. We combine paper, adhesives and refinements to realize an individual label for your needs. Matching your needs and in true Bizerba quality. Bizerba decorative paper labels make an impression: Communicate all relevant product information on high quality, double coated paper. Due to our numerous design options we achieve a high and unique advertising impact for you. Ideally suitable to differentiate your product on the market and to make it recognizable. We manufacture your individual label ranging from special sizes and die-cutting up to perforation. Bizerba decorative paper labels can be printed in multiple colors, can be varnished and additionally refined. The adhesive will be individually matched to the application. If needed, you can apply information via thermal transfer technology.

This sophisticated label solution convinces even twice: It is ideally suitable for packages in difficult ambient conditions and ensures an optically high quality brand image. We combine films, adhesives and refinements to realize an optimal label for your needs. Matching your needs and in true Bizerba quality. Bizerba decorative film labels are the right choice when you have extraordinary requirements on the label: Even in case of strong mechanical load they remain tear-resistant. They can be applied to uneven, wavy surfaces and stick optimally. Furthermore, these labels are impressive in terms of their very high surface protection against water, alcohol, solvents and grease.

Compact meat and bone saw for sales counter or preparation room The FK 23 Meat and bone saw is made entirely from stainless steel and with the very best quality construction all round. Ergonomic and effective cutting and portioning of fresh and frozen foods. Multiple saw blades are available all with the Bizerba quick, easy safe blade change system. Suitable for left and right handed operations. Even the saw wheel can be removed, cleaned and replaced without the need for tools. The total protection type is IP55. Additionally this unit can be supplied with a larger work bench and alternative special saw blades depending on your personal requirements. If you are a butchers looking to cut heavy and even frozen carcasses then this will be the ideal solution. Alternatively the system will also cut delicate fish products or matured beef products gently with ease. Easily cut products safely without effort 250 millimetres in height and up to 190 millimetres in width. If you require a...

Semi-permanent adhesives are mainly required for re-sealable labels. In addition to the packaging surface's properties, the restoring force of the packaging is a key factor. Special challenges include the certification for direct contact with foodstuffs and reactions to moisture, oils, or alcohol.

HERMA Wash-off adhesives are characterized by their reliable adhesive force, even in cool and humid environments, and can still be washed off residue-free in industrial cleaning processes. HERMA offers washable pressure-sensitive adhesives for a wide variety of applications and washing conditions. HERMA offers solutions for reusable boxes and containers as well as products that are optimally tailored to the recycling of plastic bottles and packaging. In the cleaning process, the HERMA labels are removed from reusable trays or reusable trays in food and plant logistics using water, high pressure and with the help of highly effective cleaning agents. Furthermore, HERMA Wash-off adhesives enable very pure recyclate to be produced when recycling PET bottles or PET, PE and PP packaging, without any annoying residues from paper or film labels or without adhesive residues.

Producing test specimens for adhesive tape tests is another strength of ours. We manufacture the right test specimen for you from all common materials according to FINAT, AFERA or EN 1939. Plastic test specimens Injection molding test specimens, 150 x 50 mm, 200 x 50 mm With polished class-A finish With structured surface, brushed similar to the A.F.E.R.A standard 4001 Grained with various degrees of surface roughness Various plastics, 200 x 50 mm (for tests according to the FINAT standard)

We offer a large number of materials used by the automotive industry. We will be pleased to supply you with raw and painted metals as well as automotive quality glass with or without ceramic coating. Do you wish to customize your test specimens by having a serial number applied to them? Then please contact us directly by phone or mail. All the plastic grades used in the automotive industry are available in the form of injection molded test specimens. Aluminum 6016 (with a thickness of 1.25 mm) Sheet steel grades DC06, DC04_HX420LAD+Z and DP600 Z140 on stock, further grades upon request Galvanized standard quality DX54D+Z100, DX54D+ Z140, DC04ZE50/50, DC04ZE75/75 (with a thickness of 0.8 mm); other grades upon request Higher-strength grades DP600+Z140 and HX420LAD+Z Die-cast aluminum, magnesium and zinc in various alloys Various steel or aluminum grades dimensioned for the impact test in accordance with ISO 11343 Laminated safety glass (LSG) and tempered safety glass (TSG)

Select the appropriate adhesive to suit your fields of application.
We also offer labels which completely dissolve under the influence of water.

A clean solution that allows you to label your tires in an efficient and safe manner: The adhesive-free edge of the Bizerba tire labels minimizes the cleaning effort of your application devices. It ensures optimal adhesion even on the most difficult surfaces. Matching your needs the specifically developed quality label is printable by means of thermal transfer ribbon or ink-jet. Bizerba tire labels are the right solution - meeting the special requirements of your product in terms of labeling: We have developed a soft special adhesive with strong adhesion which safely sticks to very grooved rubber surfaces. In all weathers.

High temperature adhesive tape with onesided aluminum foil suitable for a maximum radiant heat of 1000 ° C

Temperature measuring strips, for example, are stuck to components that heat up under load. The measuring strip shows the maximum temperature reached after the component has cooled down. This means that the maximum temperature of the component can be read off quickly and inexpensively.

These dissolve completely under the influence of water.

Made of polyester or polyethylene for labeling products in outdoor areas.

Can be removed and reapplied thanks to the second adhesive layer.

Self-adhesive stainless steel holding

Keiper CROMA high-performance flat belts are made of fully synthetic polyamide foils, with a one-sided or two-sided adhesion coating of chrome-split leather. Fitted with a polyamide reinforcement. With a one-sided or two-sided coating of chrome-split leather, highly resistant to abrasion and wear. Chrome-split leather is used exclusively as a friction coating on power transmission belts as an alternative to nitrile-butadiene rubber (NBR). CROMA belts with a coating of chrome-split leather are perfect for power transmission applications where the rollers are considerably contaminated by oil and dirt. In view of its slightly porous surface, chrome-split leather is air and humidity permeable and absorbs moisture; thus, it retains friction. However, the coefficient of friction of leather is lower than that for nitrile-butadiene rubber and steadily decreases during operation.

Customized Solution Hand-held device with integrated torque transducer. Direct channel selection of filed test programs. Drive of the transmission is achieved to the predetermined moment of friction during the assembly. Subsequent break-in period and subsequent Reibwertprüfung with threshold monitoring, visual evaluation and documentation. Direct channel selection of filed test programs Safety circuit by two-hand operation Constant load independent test speed either vertically or horizontally about Balancer

Do you need labels to identify your goods that have to withstand extreme heat or cold and / or are resistant to chemical and mechanical influences? Or do you need labels that fulfil technical functions? Förster Etiketten produces high-performance labels for you in specialized printing processes using exceptional materials and adhesives. Intelligent design and a capable selection of materials and adhesives produce all-rounders that perform important functions or even basic labeling requirements even under the toughest conditions

Mobile Mobile friction measurement for gear optimization 5 Nm or 30 U/min With the DPFR-036, changes in the design can be measured directly on the product. Even the smallest improvements can be identified. The area of application of this test facility is extremely diverse and can be easily implemented for other applications. The mobile design enables tests to be carried out under different temperatures and climatic conditions. Special features constant test speed independent of load selectable direction of rotation and speed Additional storage to eliminate lateral forces Acquisition of torque and angle of rotation Graphical recording of the test procedure Simultaneous viewing of up to 20 variable test sequences from the database in color Option OK and NOK signal lights

Mark and secure your products, goods or rooms with robust, high-quality and meaningful labels from Förster Etiketten. Technical labels from Förster Etiketten are multifunctional. They not only provide the right look or important information, but also offer enormous resistance as required and withstand extreme temperatures or chemicals. From individual shapes, special materials to special finishes, you will find the right solution from Förster Etiketten.

The tensiometers of the DCAT series are measuring instruments for force-based characterisation of surfaces and interfaces. Because of the compact and modular product design of the DCAT series, a bespoke combination of device and accessories can be found for any use case. The DCAT 25 is the multifunctional all-round model of the series. Measurements can be carried out at defined humidity and at temperatures between -15 °C and 300 °C. In addition it is possible to investigate the viscoelasticity of monolayers in combination with the Langmuir trough module LTMr. As the only tensiometer in the DCAT series, this model can analyse the adhesive force extensively thanks to an additional camera module. Measurements: - surface and interfacial tension - liquid density and solid density - dynamic contact angles - surface energy of solids - critical micelle concentration (CMC) - sedimentation and penetration - analysis of adhesive force - surface pressure - viscoelasticity of monolayers

Power Jet dissolves pollutions like: oils, greases, resins, silicon, residues of anti-corrosion agents, colorbatches, etc. Power Jet dissolves nearly all kinds of label adhesives. It evaporates without residues.

grease 300 is a H1 registred, high-temperature, high-performance ejector grease with a soft consistency. It is free of solids. So narrow clearances can be lubricated without any problems. Because of the high adhesive strength of grease 300, ejector-pins of injection moulds can be lubricated without facing the risk of polluted parts. The maximum operating temperature of grease 300 is 300°C.

Permanent adhesives are most commonly used for labels. However, they must be chosen carefully, depending on the application, the surface finish, and the environmental conditions. Benefit from HERMA's extensive know-how in the field.

Inviting you to touch: special papers are often used when an unusual, special look and feel is required. Let us inspire you.

Our uncoated papers absorb printing ink very well and are suitable for universal use.

It is now possible to manufacture removable labels eben for critical surfaces without any compromises regarding visual and physical durability. For that purpose, HERMA has developed a special range of adhesives that is suitable for many substrates. It allows labels to reliably perform their task, after which they can be easily removed.

Compostable self-adhesive material for biodegradable labels as a sustainable alternative Two HERMA adhesive/label combinations have now been awarded the so-called Keimling (seedling) logo, as certification according to EN 13432 has been completed. The standard is the internationally recognised benchmark for the industrial compostability of biodegradable products. Producers wishing to use compostable packaging will finally be able to enjoy the efficiency benefits offered by labelling.