Hydraulic adjustments - Import export

Lifting height up to 1,800 mm Load capacity up to 6000 kg The lifting tables in the Middle Class are available in any preferred size. Thanks to the modular design (base frame, scissor arms, hydraulic unit, platform sizes and options) they can be easily adapted to individual needs, taking into consideration also characteristics of loading/unloading areas. Benefits Infinitely variable hydraulic height adjustment Extensive project know-how Production according to German quality standards

MANUAL LIFTER FOR PALLETS MOD. FPSDJ 1016 AS with wide structure - shipped fully assembled! Lifts for pallet with hydraulic foot pump and steering or battery operation, steel structure with rounded tip of the forks, directional wheels in nylon with brakes and two front needle roller, fixed forks. (CE certificate). Version with forks width adjustable from 220 to 950 mm and wide frame. WARNING: all the elevators are shipped pre-assembled, tested one by one before packing in a professional manner and with CE certification. The elevators FPSDJ are very practical and robust, recommended where the paving is smooth (eg warehouses) where the occasional and not continuous lifting of pallets does not justify the purchase of a battery model. The structure and operation are similar to those of a standard pallet truck. You can lift the load both through rudder or pedal. For each pumping the forks are raised about 3 cm. The descent is done by pressing the lever on the rudder.

The adjustable sliding gate orifice type 8090 is suitable for precise and continuous adjustment of a defined flow. It can be adjusted and secured manually in the installed state during operation. Among other things, the orifice facilitates the hydraulic adjustment of cooling systems, e.g. when commissioning large engines in CHPs and on ships.

The adjustable sliding gate orifice type 8090 in reinforced version is suitable for precise and continuous adjustment of a defined flow. It can be adjusted and secured manually in the installed state during operation. Among other things, the orifice facilitates the hydraulic adjustment of cooling systems, e.g. when commissioning large engines in CHPs and on ships.

Kaplan turbines are typically used for river power plants on calm waters. The blade angle runner blades (Kaplan blades) is adjustable. The pressure of the water flow, which is controlled by the guide vanes of the upstream wicker gate, can then be efficiently converted into energy. The bidirectional MANOY® system seal WP, type 444, in the form of a continuous ring was developed to protect the hydraulic adjustment device and prevent hydraulic fluid leakage. Type 449 is particularly useful for maintenance work because rather than being continuous in circumference, the seal is open and has a guide blade.

A new crimper for big sized aluminium profiles 2 universal and adjustable punching units allow a work range of the crimping point from 25 to 60 mm from the vertex of the profile Pneumatic crimping via lever system ensures synchronous movement of the punching units Hydropneumatic descending counter support for easier handling of the frames Max profile dimensions: height 160 mm, max. crimping height 130 mm/ 145 mm Min. frame dimension inside 110mm with standard counter support / 175 mm with automatic counter support 2 excenter disc for good positioning of profiles 2 pneumatic down clamps Adjustable height of the V-stop, crimping knives and V-blocks 3 pairs of standard crimping knives 3/5/7 mm 2 V-blocks 15 / 30 mm 3 pairs of standard crimping knives 3/5/7 mm Power 56 KN at 8 bar each head 2 pneumatic down clamps hydraulic counter support V-blocks adjustable up to 120 mm Max profile dimensions: height 160 mm, max. crimping height 130 mm/ 145 mm Min. frame dimension inside 110mm...

Adjustable, Without Free Travel Compression Force max. 50,000 N Stroke 100 mm Motion control in both directions: The HBD model of hydraulic dampers can be adjusted independently in both the push and pull direction. These maintenance-free, ready-to-install and closed systems leave no prayers unanswered as far as the setting of retraction and extension speeds are concerned. In addition each damper works without any free travel therefore the flow of oil can be regulated exactly via the two precision metering orifices. Adjustment can be made once installed and even when moving through stroke. The coated body and hard-chromed piston rods stand for quality and long service life. The variety of mounting accessories makes assembly easy and the high-end hydraulic dampers universally usable.

Adjustable, Without Free Travel Compression Force max. 10,000 N Stroke 100 mm Motion control in both directions: The HBD model of hydraulic dampers can be adjusted independently in both the push and pull direction. These maintenance-free, ready-to-install and closed systems leave no prayers unanswered as far as the setting of retraction and extension speeds are concerned. In addition each damper works without any free travel therefore the flow of oil can be regulated exactly via the two precision metering orifices. Adjustment can be made once installed and even when moving through stroke. The coated body and hard-chromed piston rods stand for quality and long service life. The variety of mounting accessories makes assembly easy and the high-end hydraulic dampers universally usable.

Adjustable, Without Free Travel Compression Force max. 6,000 N Stroke 50 mm Motion control in both directions: The HBD model of hydraulic dampers can be adjusted independently in both the push and pull direction. These maintenance-free, ready-to-install and closed systems leave no prayers unanswered as far as the setting of retraction and extension speeds are concerned. In addition each damper works without any free travel therefore the flow of oil can be regulated exactly via the two precision metering orifices. Adjustment can be made once installed and even when moving through stroke. The coated body and hard-chromed piston rods stand for quality and long service life. The variety of mounting accessories makes assembly easy and the high-end hydraulic dampers universally usable.

Brochure High Pressure Washer Metropolis Hydraulic driven high pressure washer for connecting at an hydraulic circuit. water pressure max. 210 bar For cleaning in areas without infra structure ( no electric ) Water pump with three ceramic pistons Hydraulic engine group 2 (6ccm) Adjustable water pressure Perfect for built-in solutions at concrete transport trucks, tractors, street-cleaning trucks or concrete pumps Low noise - low maintenance - low vibrations For cleaning machines at the construction Suction lift max. 5 meters Water connection: 3/8“ Max. water temperature: 50°C optional for chemicals and pesticides Water-Bypass-system Optioanal: Elektric ON/OFF true integrated 12 Volt solenoid valve. This version has an Oil-Bypass. Type Water Output Spin Power Oil Input Weight WHY-1520 15 L/min. @ 210 bar 1750 rpm 5,5 kW 15-40 L/min. @ 210 bar 8-9 kg THY-2715 27 L/min. @ 150 bar 1750 rpm 5,5 kW 15-40 L/min. @ 210 bar 10-11 kg The METROPOLIS unit is a professional...

Fine-tune straightening of residual distortion This model represents a compact fine-straightening system for the correction of residual distortions. The special strength of the Orthopac MFRC is the extremely high straightening accuracy at relatively small distortions. The compact straightening unit is equipped with a skew and bow roller as standard. This arrangement allows for very fine adjustment of the straightening effect while permitting small device dimensions. Available with hydraulic or electrical straightening roller adjustment.

Weft straightening the way it should be ... The Orthopac RVMC is the universally employable straightening system from Mahlo for the correction of web distortions for nearly all applications. Available with hydraulic or electrical straightening roller adjustment. The modular construction allows the system to be configured to meet the demands of changing conditions and requirements.

Working range Blind rivets up to 4 mm Ø all materials. Not suitable for stainless steel CAP® blind rivets. Technical data Weight: 1.2 kg Operating air pressure: 6 bar Air hose connection: 6 mm Ø (1/4’’) Air consumption: 0.8-1.2 ltr. per rivet (0,2 ltr. compr. air) Traction power: 5.200 N at 5 bar Stroke: 15 mm Nosepieces/accessories Nosepieces: 16/18, 16/24, 16/27 and 16/29 1 set of jaws, 1 spent mandrel bottle, 1 wrench each of MSU and MSZ, Maintenance instructions with spare parts list Features • Hydraulic head in aluminium with wear-proof cylinder surface • Pneumatic cylinder made of die cast aluminium • The piston made of hardened and hard chromium plated steel make the device easy to handle and wear-proof • Compact seals are wear-proof for a long service life • Fast venting valve for fast return and high working sequence • Low-noise pneumatic switching • Simple, low-interruption valve design • Hydraulic head can be adjusted by 360°

hydraulic pallet fork for Ferrum DM yard loader / wheel loader suitable for many of our models Of course with connection for quick coupler required 3rd control circuit for opening and closing the forks The width of the forks can be adjusted without exiting at the push of a lever, ideal for this Loading goods and pallets recommended for the use of different pallet dimensions For a small additional charge we can also deliver suitable for any other holder . All we need are the exact dimensions and a drawing. Send us your inquiry and contact us if necessary. Pallet fork hydraulically adjustable The hydraulic pallet fork offering makes it possible to load the goods in sight. The tines can be opened and closed. Recommended for: Wheel loader Ferrum DM312 x4 Ferrum DM416 x4 V2 Ferrum DM522 x4 Ferrum DM430 x4 DLZ Ferrum DM625 x4 Ferrum DM732 x4 Court loader: Courtyard loader FIRST 12 Courtyard loader FIRST 16

Motorization by integrated pneumatic cylinder Driving by rack and pinion system Adjustable mechanical stops Hydraulic shock absorbers Inductive sensors The wrist of a manipulator arm These rotary modules are, for example, the wrist of a manipulator arm, the turner of parts on a conveyor or the axis of rotation of an oscillating manipulator. In general, they rotate the gripper that grips the part. These modules are equipped with hydraulic dampers and inductive sensors, the rotation guidance is ensured by 2 ball bearings that allow this module to be used in all directions, even with offcentered payload. Rotary cylinder without angular play at end of stroke The end stops located under the plate allow there to be no shock in the rack and pinion transmission and no angular play at the end of the stroke. The absence of angular play allows use in assembly or precise positioning applications with 2 positions and the absence of impact in rack

Drived by integrated pneumatic cylinder Guided by 2 rods on ball bushings Adjustable mechanical stops Hydraulic shock absorbers Inductive sensors Flow limitation Compact and robust manipulator With a compact and very robust design, they are suitable for shortstroke movement where rigidity is necessary. They are often used in vertical or lifting modules in the design of pneumatic handling assemblies. For longer strokes, use the Type 37 manipulators. Several mounting directions possible Equipped with the same end plates and without exceeding of the cylinder at the end of the stroke, these compact manipulators can be fixed by the 2 end plates to have the movable central body, but they can also be fixed by the body, the rod cylinder can then be oriented up or down. Optimized end of stroke adjustments The fine adjustment of the stroke is done by mechanical stops without any intervention on the hydraulic dampers and the inductive detectors this saves time

Fixing by its sturdy end plate Drived by ISO pneumatic cylinder Guided by 2 rods on ball bushings Adjustable mechanical stops Hydraulic shock absorbers Inductive sensors Flow limitation Easier implementation Attached to the frame by its end thanks to a sturdy flange, they serve as a lifting module for assembly, loading and conditioning machines. By combining them with Type 37 linear manipulators, you can create 2axis ZX. Equipped with hydraulic shock absorbers, inductive sensors and flow limiters, these manipulators are ready to be installed and wired. Optimized end of stroke adjustments The fine adjustment of the stroke is done by mechanical stops without any intervention on the hydraulic shock absorbers and the inductive sensors this saves time, guarantees the reliability of the adjustment and ensures an optimal lifetime of these components. All these components are very common on the market and are very accessible, thus facilitating the maintenance

Table for manual using or outside motorization Guided on ball bushings Guide tables without transmission These tables are used for manual movement or for external drives. The end plates are tapped in the center to optionally receive a hydraulic shock absorber or stroke adjustment. On request, a position clamping is available (option /BP0* on leadscrew tables). Range of linear tables with cylinder or screw transmission These tables exist, in the same dimensions, in different versions – suitable for pneumatic cylinder Type 307 – with trapezoidal screw for electric drive Type 308 – with ball screw for electric drive Type 308 – with trapezoidal screw for manual drive Type 309

Ming Xiao Manufacturing Co., Ltd appoint Ningbo Cospl Pneumatic & Hydraulic Components Co.,Ltd produce our Gas Springs products, Cospl is a professional industrial gas springs manufacturer & supplier from China. we are specialize in manufacturing various of nitrogen filled gas spring or call it gas struts,hydraulic Dampers, Shock Absorbers. Our main products include: Compression Gas Springs/ Gas Struts/ Gas lift springs/Lift supports, Locking Gas Springs,Traction gas spring/ Tension gas springs / draught gas spring, Hydraulic Dampers, Adjustable shock absorbers, etc. These gas springs & dampers can be widely applied in the fields such as aviation, automobiles, motorcycles trunk, machinery, medical exam & treatment table, fitness equipments ,furniture, doors, cabinets, etc. Gas springs are widely used in the automotive, aerospace, medical equipment, fitness equipment, furniture, machinery and other areas. for examples: door, cabinet, window, treatment table, exam bed, trunk lid...

Ming Xiao Manufacturing Co., Ltd appoint Ningbo Cospl Pneumatic & Hydraulic Components Co.,Ltd produce our Gas Springs products, Cospl is a professional industrial gas springs manufacturer & supplier from China. we are specialize in manufacturing various of nitrogen filled gas spring or call it gas struts,hydraulic Dampers, Shock Absorbers. Our main products include: Compression Gas Springs/ Gas Struts/ Gas lift springs/Lift supports, Locking Gas Springs,Traction gas spring/ Tension gas springs / draught gas spring, Hydraulic Dampers, Adjustable shock absorbers, etc. These gas springs & dampers can be widely applied in the fields such as aviation, automobiles, motorcycles trunk, machinery, medical exam & treatment table, fitness equipments ,furniture, doors, cabinets, etc. Gas springs are widely used in the automotive, aerospace, medical equipment, fitness equipment, furniture, machinery and other areas. for examples: door, cabinet, window, treatment table, exam bed, trunk lid...

Ming Xiao Manufacturing Co., Ltd appoint Ningbo Cospl Pneumatic & Hydraulic Components Co.,Ltd produce our Gas Springs products, Cospl is a professional industrial gas springs manufacturer & supplier from China. we are specialize in manufacturing various of nitrogen filled gas spring or call it gas struts,hydraulic Dampers, Shock Absorbers. Our main products include: Compression Gas Springs/ Gas Struts/ Gas lift springs/Lift supports, Locking Gas Springs,Traction gas spring/ Tension gas springs / draught gas spring, Hydraulic Dampers, Adjustable shock absorbers, etc. These gas springs & dampers can be widely applied in the fields such as aviation, automobiles, motorcycles trunk, machinery, medical exam & treatment table, fitness equipments ,furniture, doors, cabinets, etc. Gas springs are widely used in the automotive, aerospace, medical equipment, fitness equipment, furniture, machinery and other areas. for examples: door, cabinet, window, treatment table, exam bed, trunk lid...

Ming Xiao Manufacturing Co., Ltd custom produce high quality lockable gas springs struts for world customers. we are specialize in manufacturing various of nitrogen filled gas spring or call it gas struts,hydraulic Dampers, Shock Absorbers. Our main products include: Compression Gas Springs/ Gas Struts/ Gas lift springs/Lift supports, Locking Gas Springs,Traction gas spring/ Tension gas springs / draught gas spring, Hydraulic Dampers, Adjustable shock absorbers, etc. These gas springs & dampers can be widely applied in the fields such as aviation, automobiles, motorcycles trunk, machinery, medical exam & treatment table, fitness equipments ,furniture, doors, cabinets, etc. Gas springs are widely used in the automotive, aerospace, medical equipment, fitness equipment, furniture, machinery and other areas. for examples: door, cabinet, window, treatment table, exam bed, trunk lid...

Ming Xiao Manufacturing Co., Ltd appoint Ningbo Cospl Pneumatic & Hydraulic Components Co.,Ltd produce our Gas Springs products, Cospl is a professional industrial gas springs manufacturer & supplier from China. we are specialize in manufacturing various of nitrogen filled gas spring or call it gas struts,hydraulic Dampers, Shock Absorbers. Our main products include: Compression Gas Springs/ Gas Struts/ Gas lift springs/Lift supports, Locking Gas Springs,Traction gas spring/ Tension gas springs / draught gas spring, Hydraulic Dampers, Adjustable shock absorbers, etc. These gas springs & dampers can be widely applied in the fields such as aviation, automobiles, motorcycles trunk, machinery, medical exam & treatment table, fitness equipments ,furniture, doors, cabinets, etc. Gas springs are widely used in the automotive, aerospace, medical equipment, fitness equipment, furniture, machinery and other areas. for examples: door, cabinet, window, treatment table, exam bed, trunk lid...

Stainless steel gas springs are mainly used in places that are more prone to corrosion and rust than conventional environments, such as bathrooms and medical laboratories. We are specialize in manufacturing various of nitrogen filled gas spring or call it gas struts,hydraulic Dampers, Shock Absorbers. Our main products include: Compression Gas Springs/ Gas Struts/ Gas lift springs/Lift supports, Locking Gas Springs,Traction gas spring/ Tension gas springs / draught gas spring, Hydraulic Dampers, Adjustable shock absorbers, etc. These gas springs & dampers can be widely applied in the fields such as aviation, automobiles, motorcycles trunk, machinery, medical exam & treatment table, fitness equipments ,furniture, doors, cabinets, etc. Gas springs are widely used in the automotive, aerospace, medical equipment, fitness equipment, furniture, machinery and other areas. for examples: door, cabinet, window, treatment table, exam bed, trunk lid...

China Winson Gas Spring specialize in OEM /ODM developing & manufacturing various of nitrogen filled gas spring or call it gas struts,hydraulic Dampers, Shock dampers for world customers. Our main products include: Compression Gas Springs/ Gas Struts/ Gas lift springs/Lift supports, Locking Gas Springs,Traction gas spring/ Tension gas springs / draught gas spring, Hydraulic Dampers, Adjustable shock absorbers, etc. These gas springs & dampers can be widely applied in the fields such as aviation, automobiles, motorcycles trunk, machinery, medical exam & treatment table, fitness equipments ,furniture, doors, cabinets, etc. Gas springs are widely used in the automotive, aerospace, medical equipment, fitness equipment, furniture, machinery and other areas. for examples: door, cabinet, window, treatment table, exam bed, trunk lid... sales@gasspringscn.com WhatsApp +86 13780014913

Ming Xiao Manufacturing Co., Ltd specialize in custom manufacturing various of nitrogen filled gas spring or call it gas struts,hydraulic Dampers, Shock Absorbers. Our main products include: Compression Gas Springs/ Gas Struts/ Gas lift springs/Lift supports, Locking Gas Springs,Traction gas spring/ Tension gas springs / draught gas spring, Hydraulic Dampers, Adjustable shock absorbers, etc. These gas springs & dampers can be widely applied in the fields such as aviation, automobiles, motorcycles trunk, machinery, medical exam & treatment table, fitness equipments ,furniture, doors, cabinets, etc. Gas springs are widely used in the automotive, aerospace, medical equipment, fitness equipment, furniture, machinery and other areas. for examples: door, cabinet, window, treatment table, exam bed, trunk lid...

It allows technicians to check and, if necessary, to adjust the belt‘s tension in the easiest and most efficient way. In 2 minutes your belts are replaced, no realignment is needed. It will reduce your maintenance & energy costs and increase the life cycle of your equipment. Gemex Belt Tensioning System Benefits The Gemex hydraulic belt tensioning system is designed to be compatible with all designs and types of existing belt tensioning systems. The Gemex system is easy to use and comes with many benefits: Energy Savings 5 to 10% energy savings ROI of ±1 year Ease of Maintenance Improved safety for maintenance operators Belts can be adjusted during production Belt replacement within 2 minutes No alignment required Easy access and maintenance No special education necessary, everybody can use Gemex Available for all applications Installation possible on every existing frame All types of belts Horizontal / vertical All industries that use belt applications

Gemex is a hydraulically adjustable and mechanically lockable motor platform, which allows technicians to check and, if necessary, to adjust the belt‘s tension in the easiest and most efficient way. In 2 minutes your belts are replaced, no realignment is needed. It will reduce your maintenance & energy costs and increase the life cycle of your equipment. Gemex Belt Tensioning System Benefits The Gemex hydraulic belt tensioning system is designed to be compatible with all designs and types of existing belt tensioning systems. The Gemex system is easy to use and comes with many benefits: Energy Savings 5 to 10% energy savings ROI of ±1 year Ease of Maintenance Improved safety for maintenance operators Belts can be adjusted during production Belt replacement within 2 minutes No alignment required Easy access and maintenance No special education necessary, everybody can use Gemex Available for all applications Installation possible on every existing frame All types of...