Aerating - Import export

Thermal aerator for windows in translucent thermoplastic material with manual opening and closure system, with anti-insect net. It can be installed both on single and double glazing by simply turning the ring.

The iGRAIN Relay Output Unit is a control module designed for automatic control of aeration and head space ventilation fans. The unit is controlled from the iGRAIN Dashboard Manager or control board via RS485 MODBUS. Each unit has 8 relays with NO (Normally Open) and NC (Normally Closed) relay contacts and the status of each relay is indicated with a diode. Each relay unit can be set to an individual address and be installed remotely where the aeration power relays are located. The unit is normally only used for aeration control if there is no PLC/SCADA system available. Advantages • Status and control by iGRAIN Dashboard Manager • Easy control board mount • Operates in either manual or automatic mode via the aeration control software

Distinct Advantages of Enviro Ceramic Diffusers 1. Enviro Ceramic invented a novel anti-microbial inert ceramic: this technology is protecting the diffusers ceramic membrane working surface and more importantly inside the Nano pores, preventing algal and biofilm growth that block the pores. This greatly reduces costly maintenance and the risk of diffusers blocking up and not working effectively. 2. Our unique design with the patented central hole causes the tanks bottom water stream to mix through with the air lift for additional aeration. This increases efficiency as anaerobic water is moved through the oxygen rich stream. 3. The ECD can be used with lower pressures compared to some other competitor’s diffuser. It will however achieve the same flow rate with smaller bubbles due to our unique ceramic and surface technology. Lower pressures mean less stress on your system as well as reduced energy and operational costs. 4.

High-reach diffusers with 6-way air outlet. - Admissible flows from 5,500 m3/h to 63,000 m3/h. - Made of galvanized steel painted in oven-dried polyester powder paint in RAL 7035 gray. - Simple deflection grilles with slats made of polyamide. - Opening regulation from 0º to 90º. - Possibility of supply with double deflection grids. - 30mm METU clamping frame.

High-reach diffusers with 3-way air outlet. - Admissible flows from 5,500 m3/h to 63,000 m3/h. - Made of galvanized steel painted in oven-dried polyester powder paint in RAL 7035 gray. - Simple deflection grilles with slats made of polyamide. - Opening regulation from 0º to 90º. - Possibility of supply with double deflection grids. - 30mm METU clamping frame.

Slow speed aerators used for aeration and mixing of urban and industrial wastewater in various processes Provided in either fixed bridge or floating designs Ideal for Aerating most types of wastewater or industrial euents The TLF® Turbine Aerator is one of the most ecient aeration products in the marketplace Produces High Mixing and Homogenous Solutions in large lagoons and ASP tanks. IP55 geared motor with IE3 highly efficient rating Coupling sleeve and based materials coated with high grade Epoxy Paint Float can me supplied in various materials including HDPE Rotor made of glass fibre reinforced polyester. The GRP has a low density which allows installation without having to empty the tank and the design also reduces the axial loads on the gearbox.

Bladed Horizontal surface aerator suitable for circular, racetrack or rectangular channel. Designed to be maximise oxygen and flow. Use of high-quality materials of construction together with mechanical gear driven equipment. Reliable equipment with extremely long service life. COMPONENTS Brush bridge shaft with anti-corrosion paint Galvanised Steel brush blades or stainless steel Side protection discs Bearings Vertical geared motor with high energy class IE3 enclosure and eciencies Horizontal geared motor with energy class IE3 enclosure and eciencies Geared motor support bracket Upstream and/or downstream rotor cover Automatic grease cartridge Operator safety features on and upstream of the brush aerator

Submersible degreasing aerator The AEROSPEED is a submersible degreasing aerator that produces microbubbles which in turn causes grease to float onto the liquid surface. The unit is easy and simple to operate and install. Robust IP68 cast iron motor, coated with epoxy and equipped with a temperature control sensor Motor specially adapted to the constraints of operating a submerged degreasing aerator according to Europelec standards Stainless steel suction tube Stainless steel frame specially designed to optimize the hydraulic flow Stainless steel propeller specifically designed to ensure simultaneous mixing and suction of air.

Specifically designed for fixed or Float mounting which allow impeller immersion to vary in accordance with flow levels and associated oxygen demand. Ideal for Oxidation Ditches and Pocket ASP’s. 1.5 – 30kw Drive Motors 2 + 4-Pole + Dual Speed, Direct Drives Submersible Motor – IP 68 protection AISI 304 / 316 or special SS

As a floor mounted submersible aerator with intensive mixing action, it is ideal for deep tanks, existing pocket ASPs with moderate to high sludge concentrations and will re-suspend of settled sludge

Specifically designed for fixed or Float mounting which allow impeller immersion to vary in accordance with flow levels and associated oxygen demand. Ideal for Oxidation Ditches and Pocket ASP’s.

Submerged self-aspirating aerator for wastewater treatment in municipal and industrial applications. Ideal for the Aeration of shallow and medium depth sewage treatment plant tanks. Suitable for buer basins, aeration tanks, aerated lagoons and SBR reactors. Size ranges from 4kW to 37 kW. IP68 Robust motor in epoxy coated cast iron, equipped with temperature control probe Motor specifically adapted for operating submerged and at high-speed in accordance with europelec stan- dards AISI-304 or AISI-316 stainless steel frame specially designed to optimise performance Discharge channels distributing the airflow to optimize aeration and mixing

Totally independent Aerator and Mixer. Air Provided by Blower with Variable Frequency Drive which can regulate oxygen supply from zero to maximum capacity; whilst retaining full mixing and oxygen dispersion capability therefore the units are ideal for SBR ASP & MBR applications.

The Aquaturbo AER-AS is a high-speed floating mechanical aerator. It consists of a high efficiency ambient operated motor customized to Aquaturbo wet environment operating standards. The unit is constructed from stainless steel and consists of a one-piece float, a suction cone, and a two flight Archimedes style Screwpeller®. The Screwpeller® generates a flat and large-diameter spray pattern maximizing the air-water contact zone. The AER-AS is easily adaptable to nearly any basin configuration. With a lengthened intake cone section, the AER-AS can penetrate water depths up to 8 m. This allows the unit to draw activated sludge of low oxygen concentration from the bottom of the basin to be transformed into an oxygen-rich surface discharge. Easy to install, robust and reliable, the Aquaturbo AER-AS ensures efficient aeration and mixing for years of maintenance free service.

Submerged turbine operating at low speeds combined with an air blower for oxygen input. The Sofie® Submersible Aerator/Agitator is a mixing unit for extremely challenging applications. The units minimise blocking or clogging, the Sofie® can be used as an aerator or an agitator for wastewater treatment. Sofie® is designed to be installed at the base of tanks and to operate either in aeration or in a mixing mode. Sofie® is a good alternative to mechanical fine bubble aerators and is suitable for ponds with oxygen or mixing requirements.

This product is designed to descale fine bubble membrane diffusers by injecting formic acid to their internal surface. This operation is required when an increase in head loss is observed and to significantly reduce calcium carbonate deposits (carbonation) in the membrane. PUSHCART manufactured in Stainless Steel and complete with the following Storage box in HDPE PVDF lined dosing pump Flexible delivery hose 25m in pvc (reinforced with polyester fibres) Spray nozzle in stainless steel

The Aquafen® is a high-speed floating aerator for the aeration and mixing of industrial effluent and wastewater prevents stagnation in lagoons. Provided the supply and distribution of oxygen for the treatment of wastewater. Allows the wastewater to be mixed to maintain the solid particles in suspension and ensure effective treatment of the solution in the lagoons. Designed for simple installation and can be in situ above the water surface without draining the lagoon. This aerator is used for many various applications including bioreactors, activated sludge reactors, SBRs and fixed and variable level treatment lagoons.

Optigrun Aeration Substrate U-heavy is used as a drainable filler substrate beneath Optigrün Intensive Substrate I on intensive green roofs with high load capacity; high build-up.

Optigrun Aeration Substrate U-light is used as a drainable filler substrate beneath Optigrün Intensive Substrate I on intensive green roofs with low load capacity; higher build-up.

With the AIR Free Coniotomy application, the patient's airway is opened in as little as 22 seconds. Due to the obstruction of the upper respiratory tract, very serious life risks occur. The Air-Free Coniotomy Set is currently available in 2 sizes, Child and Adult. Contents of the Air Fre set 1 Trocar with Scalpel Fixed 1 Standard Adapter 1 Piece Artificial Respiration Apparatus 1 Piece Manual Aspiration Catheter 1 Piece Neck Fixation Tape It provides the opportunity to apply Coniotomy in a very short time (approximately 22 seconds). It provides risk-free and easy use.

DETAILS General Features: We provide ventilation with our own production snail fans using polypropylene material . Technical Specifications: Areas of Use:

We develop and manufacture blower components such as fans, motors, duct guides, electronics and housings and, if desired, integrate them into assemblies and devices. In addition, we develop entire blowers as well as the required equipment. Furthermore, we are your contact for fan optimisation with regard to improved volume flow, more efficient volume pressure and noise reduction.

In the fluid dynamics laboratory of our Wasserburg competence centre, we design new fan wheels and turbines and optimise existing systems for performance, energy efficiency and noise emissions. We also develop complete systems of wheels with power units. Our range of tests includes suction operation, pressure operation and also unpressurised measurements. Revolutions up to 40,000 r/min and diameters of up to 250mm are possible. In our prototype department, we are able to simulate or modify the environmental circumstances of the fan wheels or turbines, thus achieving optimal operational conditions. Furthermore, we carry out mould-flow analysis, use ANSYS from external partners for the flow simulation and establish the fault probability and fault effect with FPFEs. New: Development of blower systems and optimization of ventilation systems.

Portable evaporative cooler 10,080 m3/h with 16-speed - ECO FRESC The ECO FRESC portable evaporative coolers are ideal for cooling in a completely natural way and with low local energy consumption of up to 150 m2. To cool the air, evaporative cooling technology is used, which consists of passing the outside air through panels moistened with water. As the air passes through this area, it cools and increases its humidity. The treated air is driven by a fan inside the room and by renewing the indoor air comfort temperatures are reached. The necessary electrical power is 80% less than traditional air conditioning systems and by using water as a cooling element it avoids the emission of harmful gases into the environment. The ECO FRESC evaporative air conditioners have a 16-speed axial fan to adjust the necessary air flow at all times, they also have an electronic control in charge of performing all the equipment′s functions.

Ceiling fans for the recovery of stratified heat in the ceiling Ceiling fans with DT protection casing can be used to recover the stratified heat on the roof in winter, using the fan in winter allows us to save energy up to 30% Its use can be commercial and / or industrial and its installation can be on ceilings from 4m to 9m in height. The fans can be mounted individually or in groups with their corresponding speed regulator.

3m diameter ceiling fan with remote control and reversible MEGA AXIAL 3000 BRUSHLESS ceiling fans can be used to recover the stratified heat on the ceiling during winter and ventilate in summer, using the fan in winter allows us energy savings of up to 30%. Its use can be commercial and / or industrial and its installation can be in ceilings from 4m to 10m in height. The fans can be mounted individually with their remote control.

Ceiling fans from 4 to 7m in diameter This type of fan provides significant energy savings and is characterized by having large diameter blades that generate an air flow of 96,810 to 529,000 m3/h. They are suitable for installation in any type of premises with ceilings from 4m to 12m high. Winter operation: Its function is to lower and homogenize the stratified hot air on the ceiling, thus reducing the heating needs of the room or premises. Summer operation Decrease in sensitive temperature around 4-6 ºC

VIS MANN industrial air curtains are the perfect solution to prevent cold air in winter and hot air in summer. In addition, they provide an invisible barrier that prevents insects from entering the premises. VIS MANN A - Air only curtains VIS MANN E - Air curtains with electric resistances VIS MANN BAR - Air curtains with water coil

AD BIGGER PREMIUM evaporative air conditioners for evaporative air conditioning in industrial, commercial, agricultural or livestock premises Evaporative coolers are a natural cooling system that uses water as a cooling element. Its basic operating principle is to suck in the outside air and pass it through some cooling panels moistened with water. Once the air passes through this panel, it cools and increases its humidity. Once this process has been carried out, the air is propelled inside the premises to be air-conditioned and, based on the appropriate renovations and extraction of air, a comfortable comfort temperature and adequate indoor air quality are achieved for people. The AD BIGGER PREMIUM evaporative air conditioners, develop an air flow from 46,922 m3/h to 60,644 m3/h with an available pressure at a maximum flow of 100 Pa, its cooling capacity is suitable for premises from 750m2 to 1,100m2. For larger surfaces more units can be installed.