Construction machinery - Import export

In the highly innovative machinery and equipment construction area, our heating elements and equipment find mainly application in the tasks of heating, maintaining temperatures or evaporating liquid or gaseous media. The installation of our equipment can take place both in nonhazardous and hazardous areas of zones 1 and 2.

Construction machinery is exposed to extreme conditions and components have to be designed to long-term reliability. The systems have to feature a rugged design, high vibration resistance as well as dirt and water tightness. Also, the systems have to withstand low as well as high ambient temperatures.

In the company Mega-Metal d. o. o. we have a team of highly skilled and experienced designers. With such associates we strive for fast development, use of new technologies and are aware with the latest trends in the industry. We use modern programs to achieve superior quality of the products.

Tilt angle values of a platform stand for important measuring data as a part of the safety and control system of machinery. Angular measurement is, for instance for equipment levelling, performed in such cases by means of dual axis pendulum systems. Transducers of that type contain inside a robust splash-proof aluminium case of protection degree IP 65 to IP 68 oil-damped pendulum systems, the tilt angle dependant swing of which is measured, depending on the application, either by a potentiometric, non-contact inductive or an optoelectronic angular encoder. For measurements relevant to safety, the pendulum swing per axis is detected with redundancy i.e. by means of two mechanically and electrically independent pendulum systems. The output signal, representing the tilt angles, is provided either in form of an analog resistance, current or voltage variation or as a digital signal - with interface bus - as well.

For measuring linear displacements on machines and converting them into electrical signals for teletransmission purposes - linear displacement transmitters of the potentiometric, inductive, incrementally or absolutely coded type can be used, depending on their application. Potentiometric linear displacement transmitters comprise high-resolution wirewound resistance elements, capable of measuring length up to 1 m with high accuracy and a linearity of ± 0,1%. For protection against mechanical damage, plunger with sintered metal bearing and pull-back spring (optional) are encapsulated in a robust aluminum casing, degree of protection IP 65. Inductive linear displacement transmitters comprise a non-contact differential inductor system providing high linearity and resolution, capable to perform reliable measuring ranges from 0 to 0.5 mm up to 0 to 500 mm even under extremely severe environmental conditions.

Wind velocity indicators are used for detecting and in connection with the appropriate indicator, monitoring a maximum wind velocity. They are used mainly in safety and monitoring systems of cranes and excavators. Two models are available. One with pendulum orientation, especially suited for the attachment on jibs of mobile cranes, and a common one, pedestal mounted or mounted on a vertical post. The output signal, being proportional to the wind velocity is taken either from a built-in tachometer generator in form of a voltage or from an optoelectronic impulse transmitter with frequency-current converter in form of a current signal in two-wire technique. For applications in the temperature range down to minus 50 °C there is optionally available for both models a mounting arrangement for a temperature controlled heating device. Cross arms feed-through sleeve and crown are splash-proof, degree of protection IP 65.

If the length or angle to be monitored shall additionally be output as a continuous electrical signal, a mounting arrangement of a remote indicating device of the analog or digital type is optional available. They contain in a robust protective casing either a backlash compensated gear or a gear with reduced backlash for matching the input angle with the switching or transducer angle. Each cam unit contains two semicircular disks, which can be adjusted against each other by means of a screwdriver via a worm drive, the switching point position encompassing a switching angle from about 10° up to 350° at maximum, and over 360° of the cam shaft. Sets of break-before-make contacts are used, each comprising one normally-closed and one normally-open contact. For positional back-indication via coupling or gear, one or two angular position transmitters can be operated on the camshaft, optionally with analog or digital output signal.

The signals representing angle and length of a telescopic crane are important measuring data. Determination of such measuring data is performed by means of tilt angle and rope length transmitters. The determination of the jib angle is performed by a magnetically damped pendulum system, the swing of which is measured with a redundant high-resolution conductive plastic potentiometer. The output signal is provided in form either of two resistance signals or via the built-in signal converter in form of two current or voltage signals. Linear measurement is performed according to the draw wire measuring principle. One makes use of a multiwire measuring cable, which is wound multilayered on a cable reel provided with a pullback spring. A mechanical spindle lead screw nut ensures, that the rope is rewound and unwound exactly layer-by-layer. The number of drum revolutions, being proportional to the measured length is determined by a redundant potentiometer system voltage or current output.

Angular Position Transducers with inductive magnetoresistive or optoelectronic measuring systems. Potentiometric transmitters have either a high-resolution element of conductive plastic or a high-resolution gold or constantan wire with various resistance and angle values. For adjustment of the measuring range almost all series can be provided with short-circuiting tracks, taps and function windings. Some models are available with incorporated Signal Converter providing current or voltage outputs in configuration of 2, 3 or 4 wires. Moreover, to provide protection for all potentiometers from mechanical damage, dusty and damp industrial atmospheres a series of casings with a degree of protection IP 40 to IP 68 is available which can be equipped with gearing and limit switches.

Hydraulically operated control equipment are to an increasing extent controlled by electronic means nowadays. This is the application range - in consideration of the extreme conditions of use which the control transmitter ST2000 is especially designed for. Corresponding to the lever displacement, it provides a direction dependent switch and control signal output for both axes X and Y. Wear-free and non-contacting inductive linear transmitters are used as primary elements of the measuring system, with respect to mode of activation and robustness their design can be compared with that of the valve system of hydraulic control transmitters. The built-in electronic circuit provides for control purposes on its output per axis either a current or a voltage signal with switchable characteristic of the linear or the progressive type. A special design offers the option to incorporate a microprocessor for individual matching of characteristics.

Hydraulically actuated controlling equipment, for example in - Construction and drilling vehicles - Cranes and excavators - Wheel loaders and lifting platforms - Railway Vehicles are controlled to an increasing degree electronically nowadays. Especially for these applications (under consideration of extreme operating conditions) our pedal actuated transmitters of series FS2000 were designed for. They contain wearless magnetic control systems in redundant version for security-relevant applications according to IEC 61508 (for example SIL2) with analogue or digital signal output.

Today potentiometric Angular Position Transmitters attain a still more status with regard to the analogue measuring technique as far as high-quality measurement tasks are concerned due to the favourable value for money. Potentiometric transmitters have either a high-resolution element of conductive plastic or a high-resolution gold or constantan wire with various resistance and angle values. They are available in various sizes as single-turn or multiple-turn potentiometers or in a multiple design. For adjustment of the measuring range almost all series can be provided with short-circuiting tracks, taps and function windings. Some models are available with incorporated Signal Converter providing current or voltage outputs in configuration of 2, 3 or 4 wires. To ensure reliability in very dirty atmospheres, oil-filled potentiometers are available.

Rope Length Transmitter with high precision analog or digital encoders The determination of measuring lengths in the range of one up to several meters is preferably carried out by using well priced and easy-tomount transducers on the basis of the draw wire measuring principle. In connection with measuring problems of industrial applications e.g. on - cranes, drilling machines and excavators - pressing, punching and injection moulding machines - weirs and lock gates - multilevel shelving rack systems and theatre stages - wood- and stone-working machines and also in - instrument engineering, high-tech medical devices etc. Rope length measuring systems series SL 3000 have proven for years to be very reliable, capable of measuring lengths up to 40 m with high accuracy and reliability even in extremely dusty and moist atmospheres.

UH070 is a small, compact, and portable hydraulic power pack. Compared to a big and heavy air compressor, UH070 is only 40KG which needs only 1 person to transport. This lightweight and portable size allows the user to carry on to a mini-van easily and lets it transport everywhere where the big truck cannot run through and air compressor cannot bring in. A wide range of tools such as a breaker, rock drill, pile driver, and more can be used with this "one" unit. Unlike pneumatic tools, hydraulic tools can be used in cold weather, so no restriction for operating at a lower temperature. CE certified model.

Impulse vibratory compactor attachments for backhoe loaders and excavators are designed for soil compaction during the construction and repair of roads, buildings and special facilities. Impulse V-Series hydraulic compactors embody the best modern solutions. Reliable and affordable: Impulse compactors have a straight upper body, a modified shock absorber shape with an angle of 90 ° and a redesigned vibration damper unit using a one-piece eccentric with an integral attachment to the compaction plate. Thanks to innovations, productivity has increased by 20% compared to the previous generation of compactors. Considering the affordable price and minimal service costs, Impulse compactors are the best solution in their market segment

Cold planers have gained popularity in local road repairs, especially in confined spaces. Impulse cold planers make it possible to use a standard skid steer loader or backhoe loader instead of expensive big cutting machines. And with cold planer and standard loader perfectly perform asphalt works: removing a layer or preparing potholes for repair. Also, it’s used to remove road markings. The design uses standard cutting teeth. • Self-leveling system in a standard supply • Without vibration • Increased teeth life

Impulse Classic hydraulic breaker is an updated model line. The main difference from the same class breakers is reduced required pressing force of the working tool to start operation. While keeping an affordable price, Impulse Classic piston breakers have approached to the characteristics of diaphragm class, providing a significant increase in productivity - up to 25-30%. The main advantages of the new line are reliability, maintainability and availability. •Unique design: absence of tie through-bolts of the impact block eliminates the scoring on piston and cylinder •Change of wearing parts is done quickly. No press or puller required •Protection against idle strikes •Easy maintenance •Guaranteed to be protected against corrosion before the first start-up of the breaker •Upgraded technology of catalytic nitriding, which extends the life of the piston pair by 2.5 times •Reduced weight, which allowing to install a more powerful hydraulic breaker on the base machine.

KEM-50 Cement injection machine with boiler, used for injection pumping liquid calcium based chemicals with high density and low viscosity such as cement, plaster mixtures, stucco and grout in vertical or horizontal positions at high pressures. It is a perfect solution for the reparation stabilization and strengthening of the constructions such as bridges, buildings and dams; and also for operations such as anchorage filling, cement flooring and grouting, pumping cement, plaster, lime or other solutions towards or upwards construction areas, clay pumping or transferring, tunneling, precast unit productions etc. Its integral mixer and a section for water intake, it is easy to prepare the mixture with the proportions you want.The mixture in the boiler is transferred to the operation area by a hose; and according to the needs of the customer, the nozzles of the hose can easily be changed with different ones. All the parts that were in contact with the mixture can be washed afterwards.

HKM-200 is a powerful and durable mixer for preparing refractory grouts, mortar and other materials. Hardened mixing boiler and blades make working with refractory concrete and other corrosive materials possible. Asymmetrically located blades provide perfect mixing capability and extra balance by preventing vibration. HKM-200 can be used for composing both wet and dry mixtures, with any size of aggregates or fibers. HKM-200 can also resist the stiffness of the putty materials or high plastic consistency of concrete mixtures due to its high torque gearbox. Water resistant electrical motor, gearbox and other electrical components provide max. safety to the operator and make the machine washable after being used. Stresses of all kinds, fireproof masses, screeds, epoxy resins,steel fragment concrete, granules, mortars of all kinds, refractory clay, acoustic plasters, concrete repair plasters,finished detention finery, spray plaster, adhesive,reorganization mortar, dispersions and more.

BPM-700 concrete spraying machines and systems designed by DENMAK MAKINA are a must-have in your equipment pool due to their low price and low processing cost and ease of use. Due to its rotor structure, it is possible to use any commonly shotcrete material. By its advanced rotor geometry, hardened steel plates and special composite rubber plates it has less air and electricity consumption on operation than its competitors. Its specific oiling system lengthens the life of rubber discs by reducing mechanical wears and optimizes the operating costs. Double sealed water and dust resistant electrical panel provides safety to the operator, which is very crucial at worksite environments. Due to the ease of spare part replacement,it doesn’t require any qualified personnel or doesn’t need any calibration or adjustment to be done afterwards. It can be used in low ceilinged and narrow spaces because of compact design.

The EABASSOC Foam Generator creates foam from EABASSOC Foaming Agent (or similar), water and compressed air. The foam can then be used for making foamed concrete (also known as cellular lightweight concrete, CLC or aircrete). Specifications: *Throughput of foam 460 litres per minute *Accurate Foaming Agent dosing *Total Repeatability *Adjustable Injection Rate *Mobile (fits in car boot) *Compact - measures only 610 x 450 x 280 mm *Light enough to be easily carried - 24 kg *Requires only an air supply to work, no electrical supply needed *On/Off Timer Switch *Lance for discharging foam into ready mix truck mixer

RPM 200 is refractory and concrete spraying machine for light coating applications with reduced operating costs can easily handle all types of concretes containing different sizes and shapes of aggregates, gravels, crushed gravels, and pebbles up to 16mm in diameter. The machine has 2 cubic meters spraying capacity per hour. Improved rotor geometry, high quality steel and rubber plates reduce operating costs due to low electricity and air consumption. Its specific oiling system lengthens the life of rubber and steel plates by reducing mechanical wears. Due to the ease of spare part replacement, it doesn’t require any qualified personnel or any calibration or adjustment to be done afterwards. RPM-200 has remote control system and waterproof electrical panel to prevent current leakage and provide safety to the operator. Phase sequence protection, high and low voltage protection, high current flow protection and thermal protection. RPM-200 can be used in low ceilinged and narrow spaces.

These parts are made by aluminum,after machining by CNC milling, then process the sand blasting and anodize.

These are little screw used in construction industry,machinery parts ,and so on ...

iglidur® plate material Free design iglidur® J - the Fast-and-slow motion specialist - now available as plate material for free design. wear-resistant Lubrication-free Multi-purpose Good chemical resistance Lowest humidity absorption Application areas:Plant construction, fixtures, prototype construction, special machinery construction iglidur® plate material Free design iglidur® J - the Fast-and-slow motion specialist - now available as plate material for free design. wear-resistant Lubrication-free Multi-purpose Good chemical resistance Lowest humidity absorption Application areas:Plant construction, fixtures, prototype construction, special machinery construction General features Density 1,49 g/cm 3 Colour yellow Max. moisture absorption at 23 °C and 50 %r.h. 0,3 Wt.-% Max. water absorption 1,3 Wt.-% Mechanical properties Max. permissible static surface pressure (+20 °C) 35 MPa Shore D hardness 74 Physical and thermal properties Max. long term application temperature 90 °C Max. short term application temperature 120 °C Lower application temperature -50 °C Electrical properties Surface resistance 10 12 Ω

Other information IF -Design Award for Triflex®-Design Torsional movements possible Other information Installation instructions Joining, separating and filling of the Triflex®. Assembly Instructions Application examples Applications in various industrial sectors and in the igus® test laboratory. Triflex® 332.16 Inner height hi: 16 mm Inner width Bi: 16 mm Bending radii R: 38 - 100 mm Pitch: 13.3 mm E-Chain®. 332.32 Inner height hi: 32 mm Inner width Bi: 32 mm Bending radii R: 75 - 250 mm Pitch: 25 mm E-Chain®. 332.50 Inner height hi: 50 mm Inner width Bi: 50 mm Bending radii R: 100 - 250 mm Pitch: 30 mm E-Chain®. 332.75 Inner height hi: 75 mm Inner width Bi: 75 mm Bending radii R: 140 - 300 mm Pitch: 36 mm E-Chain®. 352.50 Inner height hi: 50 mm Inner width Bi: 50 mm Bending radii R: 10 - 250 mm Pitch: 30 mm E-Chain®, snap-open 333.16 Inner height hi: 16 mm Inner width Bi: 16 mm Bending radii R: 38 - 100 mm Pitch: 13.3 mm E-Chain®. 333.32 Inner height hi: 32 mm Inner width Bi: 32 mm Bending radii R: 75 - 250 mm Pitch: 25 mm E-Chain®. 333.50 Inner height hi: 50 mm Inner width Bi: 50 mm Bending radii R: 100 - 250 mm Pitch: 30 mm E-Chain®. 333.75 Inner height hi: 75 mm Inner width Bi: 75 mm Bending radii R: 140 - 300 mm Pitch: 36 mm E-Chain®. 353.50 Inner height hi: 50 mm Inner width Bi: 50 mm Bending radii R: 10 - 250 mm Pitch: 30 mm E-Chain®, snap-open This modular, rugged joint system is suitable for: Three-axis movements for machines of any type For dirt-filled environments High tensile strength Where rectangular shapes are requested Completely closed - reliable protection against dirt and chips Combination of different bending radii and axes Connection and separation possible at any chain Flanged mounting brackets or brackets, galvanized steel Snap-open Series 352 and 353 Combination of Series 353/333 possible Typical industrial sectors and applications Machine tools Robotics Material handling system Plastics industry Construction machinery Vehicle manufacturing Medical equipment IF -Design Award for Triflex®-Design Torsional movements possible

Other information iF-Design Award for easy triflex® Design UL94-V2 classification Torsional movements possible Other information Installation instructions Join, separate and fill the easy triflex®. Assembly Instructions Application examples Applications in various industrial sectors and in the igus® test laboratory. Triflex® E332.25 Inner height hi: 25 mm Inner width Bi: 25 mm Bending radii R: 48 - 200 mm Pitch: 14.5 mm e-chain® E332.32 Inner height hi: 32 mm Inner width Bi: 32 mm Bending radii R: 75 - 250 mm Pitch: 25 mm e-chain® E332.50 Inner height hi: 50 mm Inner width Bi: 50 mm Bending radii R: 100 - 250 mm Pitch: 30 mm e-chain®. E332.75 Inner height hi: 75 mm Inner width Bi: 75 mm Bending radii R: 140 - 300 mm Pitch: 36 mm e-chain® E333.25 Inner height hi: 25 mm Inner width Bi: 25 mm Bending radii R: 48 - 200 mm Pitch: 14.5 mm e-chain® E333.32 Inner height hi: 32 mm Inner width Bi: 32 mm Bending radii R: 75 - 250 mm Pitch: 25 mm e-chain® E333.50 Inner height hi: 50 mm Inner width Bi: 50 mm Bending radii R: 100 - 250 mm Pitch: 30 mm e-chain®. E333.75 Inner height hi: 75 mm Inner width Bi: 75 mm Bending radii R: 140 - 300 mm Pitch: 36 mm e-chain® This modular joint system is especially suited for: Three-axis movements of machines For simple robotic applications Quick installation of cables with "easy" system Simple filling from both sides Where rectangular shapes are required Combination of different bending radii and moving directions Shortening or lengthening possible at "any point" KMA mounting brackets with integrated strain relief Typical industrial sectors and applications Machine tools Robotics Handling equipment Material handling system Plastics industry Construction machinery Vehicle manufacturing General mechanical engineering Medical Equipment Office furniture iF-Design Award for easy triflex® Design UL94-V2 classification Torsional movements possible

Other information Series 14040 Inner height hi: 56 mm Inner widths Bi: 50 - 600 mm bending radii R: 135 - 500 mm Pitch: 91 mm E-Chain® with crossbars at every link Series 14240 Inner height hi: 62 mm Inner widths Bi: 50 - 400 mm bending radii R: 135 - 500 mm Pitch: 91 mm E-Chain® with crossbars at every link Serie 14550 Inner height hi: 70 mm Inner widths Bi: 50 - 600 mm bending radii R: 150 - 600 mm Pitch: 91 mm E-Chain® with crossbars at every link Series 15050 Inner height hi: 80 mm Inner widths Bi: 50 - 600 mm bending radii R: 150 - 500 mm Pitch: 91 mm E-Chain® with crossbars at every link Serie 15250 Inner height hi: 86 mm Inner widths Bi: 50 - 600 mm bending radii R: 150 - 500 mm Pitch: 91 mm E-Chain® with crossbars at every link Series 14140 Inner height hi: 56 mm Inner widths Bi: 50 - 600 mm bending radii R: 135 - 500 mm Pitch: 91 mm E-Chain® with crossbars at every other link Series 14340 Inner height hi: 62 mm Inner widths Bi: 50 - 400 mm bending radii R: 135 - 500 mm Pitch: 91 mm E-Chain® with crossbars at every other link Serie 14650 Inner height hi: 70 mm Inner widths Bi: 50 - 600 mm bending radii R: 150 - 600 mm Pitch: 91 mm E-Chain® with crossbars at every other link Series 15150 Inner height hi: 80 mm Inner widths Bi: 50 - 600 mm bending radii R: 150 - 500 mm Pitch: 91 mm E-Chain® with crossbars at every other link Serie 15350 Inner height hi: 86 mm Inner widths Bi: 50 - 400 mm bending radii R: 150 - 600 mm Pitch: 91 mm E-Chain® with crossbars at every other link Series R18840 Inner height hi: 56 mm Inner widths Bi: 75 - 462 mm bending radii R: 150 - 500 mm Pitch: 91 mm E-Tube, swivel lid Series R19050 Inner height hi: 70 mm Inner widths Bi: 50 - 600 mm bending radii R: 200 - 600 mm Pitch: 91 mm E-Tube, swivel lid Series R19850 Inner height hi: 80 mm Inner widths Bi: 75 - 462 mm bending radii R: 200 - 500 mm Pitch: 91 mm E-Tube, swivel lid Assembly tool for E4-series For the practical opening and closing of the E4 series. Big savings in assembly time Assembly tool for E4-series Special design Electrically conductive ESD/ATEX versions on request "Mounted on the side" unsupported application possible High torsionalstiffness Other information Series 14040 Inner height hi: 56 mm Inner widths Bi: 50 - 600 mm bending radii R: 135 - 500 mm Pitch: 91 mm E-Chain® with crossbars at every link Series 14240 Inner height hi: 62 mm Inner widths Bi: 50 - 400 mm bending radii R: 135 - 500 mm Pitch: 91 mm E-Chain® with crossbars at every link Serie 14550 Inner height hi: 70 mm Inner widths Bi: 50 - 600 mm bending radii R: 150 - 600 mm Pitch: 91 mm E-Chain® with crossbars at every link Series 15050 Inner height hi: 80 mm Inner widths Bi: 50 - 600 mm bending radii R: 150 - 500 mm Pitch: 91 mm E-Chain® with crossbars at every link Serie 15250 Inner height hi: 86 mm Inner widths Bi: 50 - 600 mm bending radii R: 150 - 500 mm Pitch: 91 mm E-Chain® with crossbars at every link Series 14140 Inner height hi: 56 mm Inner widths Bi: 50 - 600 mm bending radii R: 135 - 500 mm Pitch: 91 mm E-Chain® with crossbars at every other link Series 14340 Inner height hi: 62 mm Inner widths Bi: 50 - 400 mm bending radii R: 135 - 500 mm Pitch: 91 mm E-Chain® with crossbars at every other link Serie 14650 Inner height hi: 70 mm Inner widths Bi: 50 - 600 mm bending radii R: 150 - 600 mm Pitch: 91 mm E-Chain® with crossbars at every other link Series 15150 Inner height hi: 80 mm Inner widths Bi: 50 - 600 mm bending radii R: 150 - 500 mm Pitch: 91 mm E-Chain® with crossbars at every other link Serie 15350 Inner height hi: 86 mm Inner widths Bi: 50 - 400 mm bending radii R: 150 - 600 mm Pitch: 91 mm E-Chain® with crossbars at every other link Series R18840 Inner height hi: 56 mm Inner widths Bi: 75 - 462 mm bending radii R: 150 - 500 mm Pitch: 91 mm E-Tube, swivel lid Series R19050 Inner height hi: 70 mm Inner widths Bi: 50 - 600 mm bending radii R: 200 - 600 mm Pitch: 91 mm E-Tube, swivel lid Series R19850 Inner height hi: 80 mm Inner widths Bi: 75 - 462 mm bending radii R: 200 - 500 mm Pitch: 91 mm E-Tube, swivel lid Assembly tool for E4-series For the practical opening and closing of the E4 series. Big savings in assembly time Assembly tool for E4-series E-Chain® selection aids You can find the right E-Chain® quickly by entering concrete parameters and with the aid of a comparison table. Selection aids Installation instructions Joining, separating and opening of the E-Chain® and E-Tubes. Assembly Instructions Application examples Applications in various industrial sectors and in the igus® test laboratory. E4/light New E4/light version with the proved and tested "tongue and groove" system of the Series E4/4 Low weight Optimized interior-exterior dimensions ratio Cost efficient Manifold interior separation potentials Large accessory kits Thin external links Max. travel distance: 150 - 400 m Typical industrial sectors and applications Machine tools (closed E4/light tubes and open E-Chain®) Material processing Stone cutting machines Woodworking machines General mechanical engineering Vehicles Construction machinery Limited application of long travels Special design Electrically conductive ESD/ATEX versions on request "Mounted on the side" unsupported application possible High torsionalstiffness

Other information Series 2828 Inner height hi: 32 mm Inner widths Bi: 50 - 400 mm bending radii R: 63 - 300 mm Pitch: 56 mm E-Chain® with crossbars at every link Series 3838 Inner height hi: 42 mm Inner widths Bi: 50 - 400 mm bending radii R: 75 - 350 mm Pitch: 67 mm E-Chain® with crossbars at every link Series 4040 Inner height hi: 56 mm Inner widths Bi: 50 - 600 mm bending radii R: 135 - 500 mm Pitch: 91 mm E-Chain® with crossbars at every link Series 5050 Inner height hi: 80 mm Inner widths Bi: 50 - 600 mm bending radii R: 150 - 1000 mm Pitch: 91 mm E-Chain® with crossbars at every link Series 2928 Inner height hi: 32 mm Inner widths Bi: 50 - 400 mm bending radii R: 63 - 300 mm Pitch: 56 mm E-Chain® with crossbars at every other link Series 3938 Inner height hi: 42 mm Inner widths Bi: 50 - 400 mm bending radii R: 75 - 350 mm Pitch: 67 mm E-Chain® with crossbars at every other link Series 4140 Inner height hi: 56 mm Inner widths Bi: 50 - 600 mm bending radii R: 135 - 500 mm Pitch: 91 mm E-Chain® with crossbars at every other link Series 5150 Inner height hi: 80 mm Inner widths Bi: 50 - 600 mm bending radii R: 150 - 1000 mm Pitch: 91 mm E-Chain® with crossbars at every other link Series 4040HD Inner height hi: 56 mm Inner widths Bi: 50 - 600 mm bending radii R: 135 - 400 mm Pitch: 91 mm E-Chain® with crossbars at every link Series 5050HD Inner height hi: 80 mm Inner widths Bi: 50 - 600 mm bending radii R: 150 - 500 mm Pitch: 91 mm E-Chain® with crossbars at every link Series R7728 Inner height hi: 32 mm Inner widths Bi: 50 - 300 mm bending radii R: 100 - 300 mm Pitch: 56 mm E-Tube, swivel lid Series R7838 Inner height hi: 42 mm Inner widths Bi: 50 - 300 mm bending radii R: 125 - 350 mm Pitch: 67 mm E-Tube, swivel lid Series R8840 Inner height hi: 56 mm Inner widths Bi: 75 - 462 mm bending radii R: 150 - 500 mm Pitch: 91 mm E-Tube, swivel lid Series R9850 Inner height hi: 80 mm Inner widths Bi: 75 - 462 mm bending radii R: 200 - 1000 mm Pitch: 91 mm E-Tube, swivel lid Series R8840HD Inner height hi: 56 mm Inner widths Bi: 75 - 462 mm bending radii R: 150 - 400 mm Pitch: 91 mm E-Tube, swivel lid Series R9850HD Inner height hi: 80 mm Inner widths Bi: 75 - 462 mm bending radii R: 150 - 500 mm Pitch: 91 mm E-Tube, swivel lid Assembly tool for E4-series For the practical opening and closing of the E4 series. Big savings in assembly time Assembly tool for E4-series ATEX/ESD: Excellent match with special material igumid ESD (on request). "Mounted on the side" unsupported application possible High torsional stiffness System E4/4 proven in long travels Other information Series 2828 Inner height hi: 32 mm Inner widths Bi: 50 - 400 mm bending radii R: 63 - 300 mm Pitch: 56 mm E-Chain® with crossbars at every link Series 3838 Inner height hi: 42 mm Inner widths Bi: 50 - 400 mm bending radii R: 75 - 350 mm Pitch: 67 mm E-Chain® with crossbars at every link Series 4040 Inner height hi: 56 mm Inner widths Bi: 50 - 600 mm bending radii R: 135 - 500 mm Pitch: 91 mm E-Chain® with crossbars at every link Series 5050 Inner height hi: 80 mm Inner widths Bi: 50 - 600 mm bending radii R: 150 - 1000 mm Pitch: 91 mm E-Chain® with crossbars at every link Series 2928 Inner height hi: 32 mm Inner widths Bi: 50 - 400 mm bending radii R: 63 - 300 mm Pitch: 56 mm E-Chain® with crossbars at every other link Series 3938 Inner height hi: 42 mm Inner widths Bi: 50 - 400 mm bending radii R: 75 - 350 mm Pitch: 67 mm E-Chain® with crossbars at every other link Series 4140 Inner height hi: 56 mm Inner widths Bi: 50 - 600 mm bending radii R: 135 - 500 mm Pitch: 91 mm E-Chain® with crossbars at every other link Series 5150 Inner height hi: 80 mm Inner widths Bi: 50 - 600 mm bending radii R: 150 - 1000 mm Pitch: 91 mm E-Chain® with crossbars at every other link Series 4040HD Inner height hi: 56 mm Inner widths Bi: 50 - 600 mm bending radii R: 135 - 400 mm Pitch: 91 mm E-Chain® with crossbars at every link Series 5050HD Inner height hi: 80 mm Inner widths Bi: 50 - 600 mm bending radii R: 150 - 500 mm Pitch: 91 mm E-Chain® with crossbars at every link Series R7728 Inner height hi: 32 mm Inner widths Bi: 50 - 300 mm bending radii R: 100 - 300 mm Pitch: 56 mm E-Tube, swivel lid Series R7838 Inner height hi: 42 mm Inner widths Bi: 50 - 300 mm bending radii R: 125 - 350 mm Pitch: 67 mm E-Tube, swivel lid Series R8840 Inner height hi: 56 mm Inner widths Bi: 75 - 462 mm bending radii R: 150 - 500 mm Pitch: 91 mm E-Tube, swivel lid Series R9850 Inner height hi: 80 mm Inner widths Bi: 75 - 462 mm bending radii R: 200 - 1000 mm Pitch: 91 mm E-Tube, swivel lid Series R8840HD Inner height hi: 56 mm Inner widths Bi: 75 - 462 mm bending radii R: 150 - 400 mm Pitch: 91 mm E-Tube, swivel lid Series R9850HD Inner height hi: 80 mm Inner widths Bi: 75 - 462 mm bending radii R: 150 - 500 mm Pitch: 91 mm E-Tube, swivel lid Assembly tool for E4-series For the practical opening and closing of the E4 series. Big savings in assembly time Assembly tool for E4-series E-Chain® selection aids You can find the right E-Chain® quickly by entering concrete parameters and with the aid of a comparison table. Selection aids Installation instructions Joining, separating and opening of the E-Chain® and E-Tubes. Assembly Instructions Application examples Applications in various industrial sectors and in the igus® test laboratory. E4/4 "Mounted on the side" - Travel distances over 200 m "Mounted on the side" - Travel distances over 200 m Extensive unsupported lengths for "side-mounted" applications Roller E-Chain® links available (with roller chain) Max. travel distance: 200 - 800 m High torsional stability Manifold interior separation potentials Large accessory kits Typical industrial sectors and applications RTG, quayside cranes, many other types of cranes Composting plants Gypsum, concrete, chemical and mineral plants, as well as agricultural plants Machine tools: unsupported, side-mounted applications Construction machinery ESD applications Heavy machinery Steel works Shipyards Welding plants ATEX/ESD: Excellent match with special material igumid ESD (on request). "Mounted on the side" unsupported application possible High torsional stiffness System E4/4 proven in long travels