Drive units - Import export

PCS series gear units of PGR Drive Technologies serving up to 60 tones of capacity are optimum solution partners for crane industry thanks to their silent, compact bodies and easy maintenance features.

A multipurpose transmission lubricant in all seasons used confidently in brake and clutch systems,except engine, transmissions,differentials and hydraulic systems and last drive units, combine-harvesters and disinfection machines.Ensures silent operation of braking system due to friction inhibiting property.

Cost-efficient transport between floors The vehicle lift CARRICO is an interesting alternative to the TRAFFICO when lower lifting heights and less frequent use are needed. The CARRICO has been type-tested in accordance with the EU Machinery Directive 2006/42/EC. The conveying speed is limited to 0.15 m/s. Furthermore, this car lift is delivered with automatic sliding doors and cabin equipment designed for the transport of vehicles and passengers. Functions of the components Door type: automatic sliding door (depending on the cabin width - 4- or 6-leaf) Entrances: front only / through Control: Control unit with micro-processor with extensive control functions Drive: Submersible hydraulic unit incl. screw spindle pump Advantages Saves on construction space as no ramp required Especially suitable for narrow shafts Cost-effective way to transport cars Easy to operate, manual hinged doors

The PLUS SYSTEM series of linear actuators consists of highly protected linear units featuring a self-sustaining anodized aluminum structure and a steel re-enforced driving belt. This is a line of exceptionally sturdy and high performance actuators in terms of load, moment control, speed and acceleration. High load capacity,High speed,Low wear and tear,Low friction,Low maintenance.Corrosion resistant version All Plus System series of linear actuators are available with stainless steel elements, for applications in harsh environments and/or subject to frequent washes. The Plus System linear units are made by using extruded anodized Anricorodal 6060 and 6082 aluminum, which houses bearings, linear rails, nuts and bolts and components made of low carbon SS AISI 303 and 404C steel, preventing or delaying corrosion caused by humidity experienced in the environments where the linear units are used.The PLUS SYSTEM series consists of 3 distinct products with different features: ELM,Robot,SC.

The SMART SYSTEM linear actuators feature a self-sustaining anodized aluminum frame and steel re-enforced driving belt. This is a series of highly cost effective linear units, featuring high performance combined with a carefully planned simple construction. High load capacity,High speeds and accelerations, High admissible tipping moments, Low friction ,Low noise The SMART SYSTEM series consists of 3 distinct products with different features: E-SMART, R-SMART, S-SMART. SMART SYSTEM – E-SMART .

Drive unit 3 DOF Drive unit 4 DOF Drive unit 5 DOF robolink® drive units for all articulated arms Significantly expanded workroom Freely configurable arm length through modular design Step motor driven Alternative drive/control systems easily possible Drive unit 3 DOF Drive unit 4 DOF Drive unit 5 DOF

Drive units with 3 DOF with angle sensors Drive units with 4 DOF with angle sensors Drive units with 5 DOF with angle sensors robolink® drive units for all articulated arms Significantly expanded workroom Freely configurable arm length through modular design Step motor driven Alternative drive/control systems easily possible Drive units with 3 DOF with angle sensors Drive units with 4 DOF with angle sensors Drive units with 5 DOF with angle sensors

Drive unit for up to 6 DOF: Freely selectable arm lengths Drive with igus® step motors 6-axis unit completely mounted on a sturdy aluminium base Ready for connection to individual controls Articulated arms with or without optional angle sensors

The new direct-current motors with worm gear enable quiet and economically efficient operation with drylin® lead screw units. The worm wheel has a spline to which the drive pin of the linear unit is connected. As a result, a motor flange and coupling are unnecessary and, this taken in conjunction with the motor adapter angled by 90°, the structure of the linear module is very compact. Thanks to the integrated magnetic rotary encoder (2-channel hall), the new DC motors are suitable for positioning. - Space-saving and compact design - Easy to fit - Quiet operation - Rotary position encoder included - Suitable for: SLW-BB, SAW, ZLW

IKO Nano Linear NT is a linear motor drive high thrust pick & place unit with compact integral X and Zaxes, using IKO CLube Linear Way ML in the table guiding parts. Thanks to the adoption of a system which drives the moving table with a link mechanism, it realizes both higher thrust of the linear motor and weight reduction of the moving parts and reduces tact time. By entering a positioning program, you may set flexible operation patterns and change strokes easily according to the workpiece. IKO Nano Linear NT is an optimal compact positioning mechanism for semiconductor and LCD manufacturing machines, as well as testing and inspection equipment and electronic parts assembling machines which require a clean environment.

We produce driving units of 0,3 to 4,0kW. We help you with your choice - depending on your needs and use. Our standard program includes the following machines - Special production upon request Should you wish detailed information on types of connection and accessories we´ll send you our catalogue. Please contact us. Forma IV K 18/ K 24 Forma II F10 / F15 KV 12 SMV Optima

Linear units / linear guides Linear units are used in almost every single area of automation and machine engineering. From simple adjustments that may be seldom required, right up to highly complex, highly precise and highly dynamic multi-axis systems. Every task is different. And every task requires a technically accomplished, cost-effective solution. RK linear units – variety offers the ideal solution The wide range of RK linear units is the result of the variety of customer applications. What used to be referred to as 'special applications' have now become readily available, attractively priced standard modules. It is therefore likely that the ideal RK linear unit for your particular application already exists.

ZWP is one of the leading independent manufacturer in Germany for gears, pinions and rim gears. We supply already well-known manufacturers for gear boxes. We are looking forward getting intouch with you to have a conversation about possibilities for your supply. Sectors of our (international) customers are: Mining, Oil, Offshore, rail and ship transmissions, industrial transmissions, and many more fields of applications. Overview about the capabilities for production: Gears internal and external toothed hardened and grinded Module 2 – 50 mm Diameter 100 – 2,000 mm Internal toothed rings / rim gears hardened and grinded Module up to 20 mm - more on request Diameter 100 to 1,800mm Pinions and shafts internal and external toothed hardened and grinded Module 1 – 50 mm Diameter 50 – 500 mm Length up to 1,500 mm Hardening and balancing inhouse possible Cooperation with companies for special cases.

ZWP is one of the leading independent manufacturer in Germany for gears, pinions and rim gears. We supply already well-known manufacturers for gear boxes. We are looking forward getting intouch with you to have a conversation about possibilities for your supply. Sectors of our (international) customers are: Mining, Oil, Offshore, rail and ship transmissions, industrial transmissions, and many more fields of applications. Overview about the capabilities for production: Gears: internal and external toothed hardened and grinded Module 2 – 50 mm Diameter 100 – 2,000 mm Internal toothed rings / rim gears: hardened and grinded Module up to 20 mm - more on request Diameter 100 to 1,800mm Splines and shafts: internal and external toothed hardened and grinded Module 1 – 50 mm Diameter 50 – 500 mm Length up to 1,500 mm Hardening and balancing inhouse possible Cooperation with companies for special manufacturing of gears and pinions etc We speak English.

For manufacturers and operators of rails and utility/commercial vehicles, LAWECO designs customised solutions for assembly work, e.g. for the installation and removal of drive units.

These are flexible shafts with cylindrical pin or thread to connect to: Drilling machines, pneumatic motors, lathes, cutters, straight grinders, angle grinders, other electric- or pneumatic driving units

Fullgear FD 20W-40, is an construction vehicle gear oil which is developed with quality base oil sand advanced technology additives for limited slip(LS) differentials, wet brake system axles and final drive units.

Seel version trivalent blue passivated. Stainless steel version bright. Note: The spherical washer levelling set is used to mount and align motors, aggregates, drive units and production lines. The spherical washer gives exact alignment of sloping faces with an inclination of up to 4°. The locknut secures a prescribed adjustment. Accessory: Spherical levelling washers 07460

Steel 1.7225. Stainless steel 1.4305. Version: Seel version trivalent blue passivated. Stainless steel version bright. Note: Levelling sets are used for mounting, levelling and aligning motors, aggregates, drive units and assembly lines. They have a large adjustment range of 15 mm to 40 mm. Other sizes available on request.

Transportable, hose pump for liquids, independent of mains power. Ideal for sampling from barrels, tanks, wells, water separators and sewage and purification systems. Vampire is packed in a handy transport case with: drive unit, two rechargeable batteries, battery charger, LED lamp, bottle holder, bottle LDPE 250 ml, hose pump and 5 m hose made of PE.

The RKSlimlift looks unflashy and filigree but it is highly loadable. The whole drive unit is placed in the column and is not visible from the outside. Fixing slots in the side walls offer the possibility to attach additional components, e.g. panels, cable channels and braces. Max. travel. 500 mm Max. compressive force. 4000 N Max. tensile force. 2000 N Max. travel speed. 8-32 mm/s Protection rating IP 30

ViscoTec 1C dispenser vipro-PUMP ▪ Volumetric dispensing, regardless of viscosity ▪ For low to high viscosity materials ▪ Particularly suitable for highly abrasive, filled or shear sensitive materials ▪ Modular scalability of volume flow within the model range ▪ Programmable suck-back prevents dripping or stringing of product ▪ Material entry with Tri-Clamp DN 20 connection for optimized material flow and fast coupling of material supply ▪ Locking ring for easy and fast disassembling of drive unit ▪ Drive unit connection with optimized power transmission free from clearance ▪ Optimized dispenser bracket for easy adjustable mounting ▪ Long lifetime due to low wear ▪ Different rotor and stator materials available ▪ Continuous dosing, pulsation free ▪ Interior non-stick coated ▪ Dividable rotor assembly for easy & fast replacement and low spare part costs ▪ Easy cleaning and maintenance due to quick assembly and disassembly options

Quality assurance starts with the inspection of incoming goods! An all-layer sample of bulk goods is no longer a problem with PowderProof®, the sampler for powders and granules. PowderProof® is the practically proven professional solution for mobile sampling of powders and granules. Different lances and augers can be attached to the robust drive unit and swapped without any problems. This modular design makes PowderProof® a versatile instrument for sampling powders and granules from drums, barrels, bags or sacks. Safe and reliable sampling is made even easier with useful accessories such as basket-enclosed bottles, sample bags and close-it control seals. PowderProof® with lance for horizontal use, such as sampling from sacks, with lance for vertical use, for sampling from open containers such as barrels, drums or bags.

The extremely versatile LIST Single Shaft KneaderReactors are in successful operation in a wide range of industrial-scale process applications, e.g. Crystallization Drying Dissolving Main Evaporation Devolatilization Torrefaction and others The inovative design features a single mixing shaft whose kneading elements intermesh with counter-hooks attached to process housing providing a self-cleaning effect. The rotation speed and geometry of the mixing shaft and kneading elements are customized designed to optimize the prozess efficiency. With an operating volume up to 20 m3, it provides the capacity to handle largest production capacities. Typical design specifications: Volume: 7 … 20´000 l Operating pressure: 0.001 ... 16.0 ... 100 bar (a) Operating temperature: -100 ... +400 °C Operation mode: Batch or Continuous Installed Power: ... 2.5 MW Torque: ... 500 kNm Drive: Hydraulic drive units or electric motor with or without frequency converter Shaft seal: Stuffing box or...

Safe upending (90°) and rotating (180°) of coils Body design in solid welding construction with reinforced base with no pit or floor anchoring needed Body made of strong steel plates Base with large integrated floor plate and attached box construction to protect drive components Tilting unit with neatly welded half shell attachments and two reinforced coil tables welded at 90 degrees to provide safe material seating Bedding via four pressureresistant and fully enclosed bearings with lifetime lubrication Tilting shaft of highquality ductile steel with fully enclosed bearings Tilting drive via threephase motor and triplex type highstrength chain Rotating drive via welded surfacehardened sprocket, integrated in base Tilting function via initiator with arbitrary adjustable tilting point Electrical conrol in switch box with leftright selector switches and estop

Safe upending of coils (90°) Body design in solid welding construction with reinforced base with no pit or floor anchoring needed Body made of strong steel plates Base with large integrated floor plate and attached box construction to protect drive components Tilting unit with neatly welded half shell attachments and two reinforced coil tables welded at 90 degrees to provide safe material seating Bedding via four pressureresistant and fully enclosed bearings with lifetime lubrication Tilting shaft of highquality ductile steel with fully enclosed bearings Tilting drive via threephase motor and triplex type Highstrength chain Tilting function via initiator with arbitrary adjustable tilting point Electrical conrol in switch box with leftright selector switches and estop

Designed for special requirements – no adaption, no compromises: There are decades of engineering expertise of MS-Graessner in the newly developed Power Gear HS series. Thus each individual component was consistently developed and designed to meet the requirements at the highest speeds. With a multitude of benefits for a variety of applications and fields of application. Gearbox for highest speeds For dynamic servo drive-train units Higher permissible thermal performance limit Low backlash and high accurate transmission Motor mounting via coupling an lantern Friction-locked fit between shaft and bevel gear Suitable as pre-stage for coaxial gearboxes Energy-saving due to high efficiency rating of 98% Technical overview Sizes S90, S110, S140, S170 Configurations L, H, KL, KH Ratio i = 1,0 / 1,5 / 2,0 Shaft arrangement WA 1, WA 3, WA 13 Input speed n 1max up to 8500 min -1 Motor mounting Via coupling and lantern (KL/KH)

The 2500 KW cooling tower is designed to provide high performance for a minimal unit size. The specially designed drift eliminators reduce drift to 0.002% of flow. When supplied with chilled water, the cooling tower can also be used as a bulk air cooler for applications requiring large air flow. Designed and assembled to Aggreko’s standards. Packaged into 20 ft. ISO container frame. Brentwood drift eliminators designed for forced draft. Fully enclosed and protected from direct sunlight. Fan unit driven by a variable speed drive. Controlled operation of condenser unit fans. Safe and reliable operation for rental applications. Ease of transportation, handing and protection. Reduces drift to a rate significantly lower than that required by law. Increases safety with respect to microbial growth. Regulates fan speed proportional to sump temperature. Maximises efficiency, minimises noise and prevents overcondensation when coupled with water-cooled chillers.

The MULTI MONT OCTA flywheel coupling is designed specifically as a torsionally flexible drive coupling for units with internal combustion engines. It is used to dampen torsional vibrations and to compensate for misalignments. Salient features and advantages of the MULTI MONT OCTA flywheel coupling: Efficient torsional vibration and peak torque dampening and absorbing capability Ease of assembly thanks to the plug-in type design Compensation of axial, radial and angular misalignments Coupling hub of spheroidal cast iron as a standard Fail safe design combined with a high load carrying capability, nevertheless with protection against overload breakage by means of the existing rated break point Simple, compact and thus low-cost coupling design We are glad to see that you are interested in our product line and are happy to answer all questions! Please use our contact form or call us: +49 234 959160. For additional information regarding designs, sizes or technical details please...