Electronic equipment - Import export

Small precision parts for electronic equipment. Our machined parts are used in: -the medical fields, -electronic equipment, -automotive industry, -aerospace, -intelligent robotics and -Industrial automation. Specialized in smaller productions has its own advantages. We individually devote ourselves to our partners. The advantages of this kind of cooperation is review of technical documentation before production and possible adjustments made beforehand, which leads to more affordable and better quality of the end-product, and consequently greater satisfaction of our partners.

Arabic bread production line (automatic bakery) is a fully automatic production line, from mixing ingredients to cooling bread through several successive machines, and bread is known as Arabic bread, Lebanese bread or Syrian bread, and it has spread in recent times all over the world because of its advantages and positives . Basic components of the line: - Dough Fork Mixer - Dough Basins. - Dough Divider. - Primary Proofer. - Dough Flattener. - Final Proofer. - Tunnel Oven. - Cooling Conveyor. - Air Compressor. - Electrical Control Panel.

Capacitor: 6kV - 10kV Air Core Reactors: up to 35kV SVC / STATCOM Series / Shunt Banks Arc suspension coil

As part of our maintenance and repair services, we also perform technical upgrading and modernisation operations on existing electrical equipment.

According to initial estimates, in Germany about three million LCD monitors will be recycled in the year 2016. However, they often still have backlighting containing mercury and therefore have to be classified as “hazardous waste” in accordance with the German General Administrative Regulation (AVV) and registered in compliance with the German Electrical and Electronic Equipment Act (Elektro G) under category 3. Whereby special conditions must ensure that no risk arises from the mercury for the environment or for humans. However, because of a lack of suitable automated procedures for the recycling of LCD monitors, it was to date only possible to dissemble the appliances laboriously by hand, with the ensuing health dangers for the workers. For this, ERDWICH now offers two alternatives which are both safe and time-saving for recycling LCD monitors. Mercury and valuable resources can be removed and recycled in an environmentally sound way in the future: 1. Monitor sawing plant for...

These bearings are compactly designed, incorporating very thin needle rollers in an outer ring with a small outside diameter relative to the stud diameter. They are used in electronic devices, OA equipment, and small index devices, etc.

LABELS PRODUCED ON PAPER OR FOIL LABELS PRODUCED ON A SILICONE OR FOIL BASE FLEXO TECHNOLOGY LINES FOR PRINTING AND ROLLING ROLLING MACHINES EQUIPPED WITH ELECTRONIC SYSTEMS FOR 100% IN-LINE PRINT INSPECTION SYSTEM

Material: aluminum Strong adaptability Reliable mechanical structure Strong repulsion (adjustable) High efficiency in separation Applications: Electronic waste disposal (refrigerator dismantling lines) Separation of aluminum cans and ferrous metals Separates nonferrous metals from the bottom ash of boiler Separates aluminum or copper block from the sections of abandoned cars Separates nonferrous metals from the glass scrap Separates nonferrous metal impurities in some production lines (such as plastic recycling production line) Separates nonferrous metals from recycled plastic doors and windows metal separator is mainly used to recycle copper, aluminum and other nonferrous metals from industrial waste and solid waste Widely used in Eco-friendly industries, like waste classifications, waste electrical and electronic equipment recycle and the treatment of non-ferrous metal industrial materials High quality, competitive price, best services

Eratec designs, manufactures and sells metal fibre gas burners. The Eratec metal fibre burner is an emitter with a refractory stainless steel combustion head on a Bekinit® knitted metal fibre radiating surface. The combustion head is equipped with an electronically controlled air/gas premixing system.

Our breakthrough medical light device is based on Nobel Prize winning technology, and is fully certified for non-invasive, accelerated healing and medical prevention of a remarkable range of conditions, including: acne, skin wounds, sports injuries, anti-aging, arthritic and low back pain. 5 to 10 minutes exposure to BIOPTRON Medical light, twice a day, is all that is needed for accelerated healing.

MyIon is an innovative, wearable air sterilizer which uses advanced air ionizing technology to eliminate all harmful airborne particles: - PM 2.5, dust, allergens and viruses. "For people to be and stay healthy, they must breathe clean air from their first breath to their last" Dr Flavia Bustreo, Assistant Director General at World Health Organisation

Where are magnetic field mats used? The coils currently manufactured by us are processed by our customers into so-called electromagnetic field mats. These mats are used in Pulsed Electromagnetic Field (PEMF) therapy. Many PEMF devices are suitable for private use at home. However, various health service providers including physical therapists as well as non-medical practitioners offer therapies based on magnetic fields. Why is our embroidery technology used for production? This technique creates circular-shaped structures that form the basis for a homogeneous flow/direction of the electric current. At the same time, the mechanical wire laying has an extremely high level of accuracy. The distances can also precisely be determined. How is the magnetic field created? Simply put, this is how electromagnetic fields are created: pulsating magnetic fields are generated by the electric current flowing through the wire. The more wire, the stronger the magnetic field.

Our medical light technology is based on Nobel Prize winning technology, and is fully medically certified. B2 is non-invasive, accelerates healing and treats a wide range of conditions, including: acne, skin wounds, sports injuries, anti-aging, arthritic and low back pain. 5 to 10 minutes of treatment with BIOPTRON, twice a day, is all one needs for accelerated healing. Health professionals choose BIOPTRON 2 because of its larger 15cm filter diameter, angled shape and easy to use.

Our medical light technology is based on Nobel Prize winning technology, and is fully certified for non-invasive, accelerated healing and medical prevention of a wide range of conditions including: acne, skin wounds, sports injuries, anti-aging, arthritic and low back pain. Just 5 to 10 minutes of treatment with BIOPTRON twice a day is all that is needed for accelerated healing. BIOPTRON Pro 1 has a filter diameter of 11cm and is designed for use at home, in hospitals and in therapeutic centers.

Therapy Air® Smart is the latest generation of the most effective air purification systems that combines proven HEPA technology with the power of negative Ions and UV-C light. This all-in-one filtration system removes 99.9% of harmful particulates, pathogens and polluting gasses from air.

Humans on average breathe over 11,000 litres of air each day. We spend 90 per cent of our time indoors; be it in our homes, places of work, schools, or health and fitness centres, where the levels of pollutants and allergens can be 100 times higher than already dangerously polluted outdoor air. Breathing polluted air makes us sick and is a root cause of many fatal diseases. TherapyAir iOn is a sophisticated and highly effective air purification and ionization system that removes 99.99% of airborne particulates. Purified 99.99% therapy air free from viruses, bacteria and toxic substances is a must have in every indoor space for well-health and is the only real and healthy investment for homes, offices, schools and kindergartens, sport and recreation centers, hospitality retreats – all indoor spaces. Therapy Air was voted best high-end air purifier on the market by independent Experten Testen (Germany 2016 and 2020).

TTK 125 S COMMERCIAL DEHUMIDIFIER"Nobody can offer as many litres at this weight" The TTK 125 S combines advanced detail solutions for powerful drying applications with a weight-optimized construction in a tried and tested German industrial design – protected prototype. The inner values are in no way inferior to the impressive enclosure: All electric components are specially enclosed to protect the electronic equipment from anything dangerous which may enter and impair the functionality and durability. Thus, the TTK 125 S is also perfectly suitable for drying in rough conditions. Good things come in small packages: Power pack TTK 125 S Due to its extremely low-maintenance design, the TTK 125 S is easy to clean and thanks to its low power to weight ratio and its clever mobility features, it is easy to transport. Nevertheless, in terms of dehumidification capacity, it is no lightweight:

TTK 175 S COMMERCIAL DEHUMIDIFIERPowerful drying technology at the top of the game... The TTK 175 S impresses with a variety of detailed solutions which save you time, enhance your performance and secure value retention – attractively combined in the tried and tested German industrial design – protected prototype. All electrical components are also protected from dust and dampness by default. The special enclosure offers maximum protection of the electronic equipment from anything dangerous which may enter and impair the functionality and durability. This enclosure predestines the commercial dehumidifier for rough environments at various sites. Wheel it in and watch it work – powerful rotary compressor technology in a robust carriage design Thanks to the ergonomic construction and carriage design with a bar handle and large wheels, the TTK 175 S can easily be transported in construction site conditions or up and down stairs.

Sensitive electrical or electronic equipment, components and devices (ESD sensitive elements) may be damaged or destroyed by electrostatic discharges (ESD) in the immediate vicinity. Electrostatic discharges can come from people or through handling ESD sensitive components (e.g. during production, assembly, transport, storage etc). Electrically conductive products which conform to DIN EN 61340-5-1 are essential within electronic environments to prevent an electrostatic discharge. These products can be used for ESD applications or in ESD protection areas (EPA) in accordance with DIN EN 61340-5-1. Safety: These ESD products can also be used for devices, components and protection systems in areas with high risk of explosion. Use of these ESD products prevents the occurrence of electrostatic spark discharges, eliminating the potential ignition of gases and dusts which could lead to explosions in enclosed spaces.

OKS 1105 prevents the formation of electrically conductive layers and minimises the risk of flashovers and dielectric losses. The insulators and switchgear covered with the paste thus maintain a good insulation resistance. Sealing lubrication for electrical or electronic equipment such as relays, plug-in connections, cable lugs and lamp sockets Protection of insulators and switchgear in humid atmospheres, for example of junction boxes, screw terminals, overload cutouts at high-voltage pylons, connecting cables and terminal connections Lubricant for plastic screw connections and other moving parts of metal, ceramic, plastic Advantages and benefits Excellent water repellent properties Excellent surface wetting Good adhesion on glass, porcelain and plastics Stable consistency across a wide temperature range Very good resistance to chemical and weather-based influences (e.g. ozone, UV radiation) Neutral with regard to many materials

Removal of loose oxide and electrode-erosion residues, dust deposits or creepage currents which cause soiling in moving contact areas such as motor-vehicle ignition distributors, relay contacts, resistance or potentiometer slideways, in static contact areas such as motor-vehicle spark plugs, plug-in connections, sliding and screw connections, in or on electrical and electronic equipment or devices of all kinds Advantages and benefits Highly effective due to outstanding cleaning properties Broad range of uses for all maintenance and customer service work in electrical sector Fast evaporation after striking surface

The tension meter is used to perform a pretension test on commercially available belt systems quickly and easily by means of frequency measurement. Fully electronic and equipped with stateoftheart microprocessor technology, the meter enables precise adjustment of all V, toothed and flat belts that have to be tensioned in the range from 10 to 600 Hz. The measurement must never be performed while the drive is running The meter is not permitted or certified for use in potentially explosive areas.

I vårt produksjonsanlegg har vi implementert teknologien for sveising av karbonstål fra materialgruppene 1.1 og 1.2. Dette er S355 J2 stål og stål med lavere flytestyrke. Tykkelse av sveisede materialer: Butt sveiser er implementert for stål med en tykkelse på 3 - 24 mm Filesveiser er implementert for stål> 3 mm tykk Sveisemetoden er MAG - 135, dvs. heldekkende sveising. Vi sveiser også rustfritt stål med TIG-metoden. Vi har et 3834-2 sertifikat

Economical and easy-to-use desoldering wire. ESD protective product. Dimensions: 1.5mx 1.0 mm Zero Cycle Count, so you have the maximum amount of cycles remaining. Lithium-Ion Polymer technological materials Strict QC test Less than 1% failure rate 12 Yes Garanti

The multiprocess parts washing machine with rotating basket is a cleaning device for industrial use.This machine has been designed to ensure that parts are washed effectively and quickly. The main feature of the machine is the rotating basket system.The pieces are placed in a specially designed basket and the basket is washed by rotating it on a rotating mechanism. In this way, each surface of the parts is cleaned equally and a more effective washing process is performed. The Multiproces feature allows different cleaning stages to be performed on the same machine.For example,you can perform different operations such as detergent, spraying, brushing and rinsing on a single machine. Multiprocess parts washing machine with rotating basket is ideal for cleaning parts used in automotive, machinery, electronic equipment and similar industries. It optimizes the production process and increases quality by providing fast, effective and reliable cleaning.

Typically ceramic bolt and screws are used in low-stress & high temperature conditions. These conditions are most commonly found in electronic equipment, where ceramic screws are particularly attractive due to their lack of electrical conductivity. Another benefit of ceramic screws over polymer based ones are that they have much higher and longer lasting performance due to their ability to withstand sustained heat cycling. Supply in M2x5, M3x10 and M4x10 screws with nuts, customized size is acceptable.We recommend to use the screws only together with the supplied nuts. The usage with metallic threads might not fit as the ceramic parts are manufactured in moulds and reach their final dimension after sintering. Hence they have other tolerances than metallic threads. >Thread Specification:M3-M24 >Screw cap:Hexagonal socket, flat head >Plain Ceramic Hex M3 x 10mm Set Screw >Made from alumina ceramic >Suitable replacement for plastic screws to solve embrittlement or creepage problems

Bar bending machine. Bending disk and adjustable strength steel saddles. Capacity 1 bar Ø 45 mm (#14) Plate revolving speed 5÷12 RPM Equipped with electronic programmer up to 50 bends

Manufacturer and supplier of steel beams