Heating fuels - Import export

PINY KAY briquettes consist in rectangular form agglomerations with easy stacking and handling. Because of the hole in these briquettes, it reduces amount of smoke. These briquettes are produced by pressing dry chipped wood at high pressures and high temperatures. They have the maximum burning time and produce the maximum useful heat. Piny&Kay fuel briquettes are remarkably resistant to mechanical action and moisture and store well. Pini kay Fireplace Briquette burns slowly, which gives off more heat, thus saves money. The unique technology of producing this briquette enables aesthetic combustion, without absorbing moisture from the air, and prevents contamination of heating devices.

The dipping system which is one of the other methods is produced with a robot or crane controlled. The systems are equipped with the most efficient heating, ventilating and PLC control equipment. In our dipping lines manufacturing, AISI 304- AISI 316 stainless sheets of steel and polypropylene are used. The system should be selected according to the shape of the part, the area to be used and the corrosion resistance. Some chemicals which are used for surface cleaning must be applied hot. Due to this situation, our company produces cold dipping lines as well as natural gas heated, electric heated, liquid fuel heated and water heated dipping pre-treatment lines according to the energy source that is planning to be used.

PINY KAY briquettes or PINI KAY briquettes consist in rectangular form agglomerations with easy stacking and handling. Because of the hole in these Briquettes, it reduces amount of smoke. These Briquettes are produced by pressing dry chipped wood at high pressures and high temperatures. They have the maximum burning time and produce the maximum useful heat. Piny and Kay fuel briquettes are remarkably resistant to mechanical action and moisture and store well.

Most of the consumption went to heat production, accounting for 61.8%. Pellet fuel consumption for heat production can be divided into three markets – residential heating (69%), commercial heating (19%) and heat produced by cogeneration (12%). The remaining 38.2% of wood pellets were used for electricity production. It should be noted that technologies for energy production from pellets for heat, electricity or both are mature, providing efficient and reliable processes. Wood pellets 6mm

UNIFLAM 700 OPTIMA ECO cast iron fireplace insert with damper ref. 907-475 is an ecological product - meets the requirements of Ecodesign. - nominal power: 12 kW - efficiency: 77% - average emission of carbon monoxide (CO): 0.11% - average flue gas temperature: 310 °C - max. length of wood logs: 50 cm - flue gas outlet diameter: 200 mm - weight: 128 kg - secondary combustion - damper - primary air supply adjustment - deflector - ash pan - grate - heating fuel: wood - 5-year warranty - CE certificate - FLAMME VERTE certificate - compliance with ECODESIGN - compliance with EN 13229 - energy class A - country of production: France

Nominal power: 8 kW - efficiency: 76% - average emission of carbon monoxide (CO): 0.10% - average flue gas temperature: 319 °C - air supply: Ø100 mm or 150x50 mm - max. length of wood logs: 50 cm - flue gas outlet diameter: 180 mm - weight: 98 kg - damper - air supply for combustion directly from the outside - regulation of primary air supply - deflector - ash pan - grate - heating fuel: wood - 5-year warranty - compliance with ECO PROJECT - compliance with the EN 13229 standard - CE certificate - FLAMME VERTE certificate - energy class: A - manufacturer: UNIFLAM - France

Cast iron fireplace insert - nominal power: 14 kW - efficiency: 73% - average emission of carbon monoxide (CO): 0.23% - average flue gas temperature: 228 °C - max. length of wood logs: 50 cm - flue gas outlet diameter: 180 mm - weight: 91 kg - combustion air is supplied directly from the outside - primary air supply regulation - deflector - ash pan - grate - heating fuel: wood - 5-year warranty - compliance with the standard EN 13229 - CE certificate - FLAMME VERTE certificate - manufacturer: UNIFLAM - France

Cast iron fireplace insert - nominal power: 14 kW - efficiency: 73% - average emission of carbon monoxide (CO): 0.23% - average flue gas temperature: 228 °C - max. length of wood logs: 50 cm - flue gas outlet diameter: 180 mm - weight: 91 kg - regulation of primary air supply - deflector - ash pan - grate - heating fuel: wood - 5-year warranty - compliance with EN 13229 - CE certificate - FLAMME certificate VERTE - manufacturer: UNIFLAM - France

The PARKANEX/PARKANEX rosette is a decorative element that masks the connection between the flue pipe and the chimney. The PARKANEX chimney connection system is intended for exhausting fumes from stoves, fireplace inserts and other solid fuel heating devices. The system meets European standards, ensuring safety, maximum efficiency and comfort of use. Over 130 years of experience and the use of modern technologies make the PARKANEX system gain recognition among customers throughout Europe.

The PARKANEX/PARKANEX rosette is a decorative element that masks the connection between the flue pipe and the chimney.The PARKANEX chimney connection system is intended for exhausting fumes from stoves, fireplace inserts and other solid fuel heating devices. The system meets European standards, ensuring safety, maximum efficiency and comfort of use. Over 130 years of experience and the use of modern technologies make the PARKANEX system gain recognition among customers throughout Europe.

Fireplace insert UNIFLAM 700 OPTION ECO with damper, air supply ref. The 907-775-DP is an eco-friendly device. Meets Ecodesign requirements. - nominal power: 10 kW - efficiency: 77% - average emission of carbon monoxide (CO): 0.12% - average flue gas temperature: 295 °C - max. length of wood logs: 50 cm - air supply: Ø100 mm or 150x50 mm - flue gas outlet diameter: 200 mm - weight: 127 kg - damper - combustion air supply directly from the outside - secondary combustion - regulation of primary and secondary air supply - air supply for the glass - deflector - ash pan - grate - heating fuel: wood - 5-year warranty - compliance with ECODESIGN - compliance with EN 13229 - CE certificate - FLAMME VERTE certificate - energy class A - country of production: France

Fireplace insert UNIFLAM 700 OPTION ECO with damper ref. The 907-775 is an eco-friendly device. Meets Ecodesign requirements. - nominal power: 10 kW - efficiency: 77% - average emission of carbon monoxide (CO): 0.12% - average flue gas temperature: 295 °C - max. length of wood logs: 50 cm - flue gas outlet diameter: 200 mm - weight: 127 kg - damper - secondary combustion - regulation of primary and secondary air supply - air supply to the glass - deflector - ash pan - grate - heating fuel: wood - 5-year warranty - compliance with ECODESIGN - compliance with EN 13229 - CE certificate - FLAMME VERTE certificate - energy class A - country of production: France

CSN ® Explosionproof gas preheaters are used for heating of fuel gases in hazardous areas. The devices consist of gas pipes which are molded together with an ExFlange heater in a cast aluminum body. Further information about our CSN® Exgas preheater

EEx’e’ certified electrical process flow heaters EEx e T1 – T6 ATEX The “STR-Exe” type electric process flow heaters are EEx e certified. These heaters are custom built to meet client specifications and suitable for use in zone 1 & 2 hazardous areas. The “STR-Exe type electrical process flow heater comprise a large range for industrial application. These heaters are supplied CE marked in acc. the latest CENELEC requirements or manufactured to the latest IEC standards. Typical electric process heaters applications include heating of liquids i.e. heat transfer oil or fuel oil, glycol reboilers and water heaters and heating of pressurized gases i.e. pressurized air, superheated water steam, nitrogen or other compositions of gases. Thyristor control systems are also designed and supplied by OhmEx to control the range of electric process heaters. We are pleased to advice on the most suitable control system for your heating application.

For all types of mineral oil products, especially technical oils and lubricants, petrol and benzole mixtures 50 : 50, leaded and unleaded fuels with an aromatic content up to 50%, diesel fuels, heating oils, hydraulic oils based on mineral oil. Barrel-polishable, vacuum-constant finish. Temperature resistant from –35°C to +90°C. Conforms to DIN EN 12115. Construction: Oil & petrol-resistant, conductive NBR tube Tension and pressure resistant fabric inlays Embedded copper wire Weather-resistant, abrasion-resistant, conductive CR cover Interior and exterior smooth, fabric patterned Supplied by the roll or cut to length. Also available as spiral hose. Other versions and dimensions on request.

Flexible pressure hose for petrol and benzole mixtures 50 : 50, leaded and unleaded fuels with aromatic content up to 50% Diesel fuels, heating oils, mineral oil-based hydraulic oils. Barrel-polishable hose with very narrow bending radiuses and easy handling. Temperature resistant from –35°C to +90°C. Conforms to DIN EN 12115. Construction: Oil and petrol-resistant, conductive NBR tube Tension and pressure-resistant fabric inlays Embedded copper wire Weather-resistant, abrasion-resistant, conductive CR cover Interior and exterior smooth, fabric patterned *) Version as tank cleaning hose. Resistant to all customary cleaning agents. Supplied by the roll or cut to length. Other versions and dimensions on request.

Electrical process flow heaters The “STR type electrical process flow heater comprise a large range for industrial application custom built to meet client specification. These heaters are supplied CE marked in acc. the latest CENELEC requirements or manufactured to the latest IEC standards. Typical electric process heaters applications include heating of liquids i.e. heat transfer oil or fuel oil, glycol reboilers and water heaters and heating of pressurized gases i.e. pressurized air, superheated water steam, nitrogen or other compositions of gases.

CSN® tank heating units are particularly suitable for the direct heating of liquids (Oil, Water, Emulsions), air and gases. They contribute to the avoidance of paraffin clouds in fuel oil or Diesel storage tanks. In relation to the process, we provide you with tank heating units with tubular heating elements made of stainless steel which we adjust to the respective application situation and the medium to be heated in consultation with you. We offer our series “THF” a suspended, on a chain flexible solution to keep heating oil or diesel fuel in the extraction line pumpable. As a fixed version, we recommend our industrial immersion heaters for heating liquids. Further information about our CSN® Tankheizkörper

Electrical process flow heaters The “STR-TWIN type electrical heater comprise a large range of process flow heaters for industrial application custom built to meet client specification. Due to the small diameter construction of the vessel it is perfectly suitable for low volume or mass flow. These heaters are supplied CE marked in acc. the latest CENELEC requirements or manufactured to the latest IEC standards. Typical electric process heaters applications include heating of liquids i.e. heat transfer oil or fuel oil, glycol reboilers and water heaters and heating of pressurized gases i.e. pressurized air, superheated water steam, nitrogen or other compositions of gases. Thyristor control systems are also designed and supplied by OhmEx to control the range of electric process heaters. We are pleased to advice on the most suitable control system for your heating application.

A heat exchanger is a device designed for the transfer of internal thermal energy between two or more fluids with different temperatures. Typically, these fluids are separated by a heat transfer surface to prevent mixing. Heat exchangers find applications across various industries, including process, power, petroleum, transportation, air-conditioning, refrigeration, cryogenic, heat recovery, alternate fuels, and more. Examples of heat exchangers encountered in daily life include automobile radiators, condensers, evaporators, air preheaters, and oil coolers. Heat exchangers can be classified in numerous ways based on their design and applications.

Moisture ≤ 5% Calorific Content 4600 - 5100 Kcal/Kg Density 600-800Kgs/CBM Diameter 6mm - 8mm Packing 15kg Plastic Bag / 1000kg Big Bags Usage Cooking Fuel - Heating System BRAND Per Customer Request

Moisture ≤ 5% Calorific Content 4600 - 5100 Kcal/Kg Density 600-800Kgs/CBM Diameter 6mm - 8mm Packing 15kg Plastic Bag / 1000kg Big Bags Usage Cooking Fuel - Heating System BRAND Per Customer Request

Moisture ≤ 5% Calorific Content 4600 - 5100 Kcal/Kg Density 600-800Kgs/CBM Diameter 6mm - 8mm Packing 15kg Plastic Bag / 1000kg Big Bags Usage Cooking Fuel - Heating System BRAND Per Customer Request

Moisture ≤ 5% Calorific Content 4600 - 5100 Kcal/Kg Density 600-800Kgs/CBM Diameter 6mm - 8mm Packing 15kg Plastic Bag / 1000kg Big Bags Usage Cooking Fuel - Heating System BRAND Per Customer Request

Moisture ≤ 5% Calorific Content 4600 - 5100 Kcal/Kg Density 600-800Kgs/CBM Diameter 6mm - 8mm Packing 15kg Plastic Bag / 1000kg Big Bags Usage Cooking Fuel - Heating System BRAND Per Customer Request

Moisture ≤ 5% Calorific Content 4600 - 5100 Kcal/Kg Density 600-800Kgs/CBM Diameter 6mm - 8mm Packing 15kg Plastic Bag / 1000kg Big Bags Usage Cooking Fuel - Heating System BRAND Per Customer Request

Moisture ≤ 5% Calorific Content 4600 - 5100 Kcal/Kg Density 600-800Kgs/CBM Diameter 6mm - 8mm Packing 15kg Plastic Bag / 1000kg Big Bags Usage Cooking Fuel - Heating System BRAND Per Customer Request

Moisture ≤ 5% Calorific Content 4600 - 5100 Kcal/Kg Density 600-800Kgs/CBM Diameter 6mm - 8mm Packing 15kg Plastic Bag / 1000kg Big Bags Usage Cooking Fuel - Heating System BRAND Per Customer Request