Rotary feeder - Import export

Apron feeders come in varying widths, ranging from 0.6 to 3.0 meters, and lengths spanning from 2.4 to 30.5 meters. Lengths exceeding 4.6 meters are primarily used for material conveyance rather than being an integral part of the feeder. Apron feeders exhibit capacities ranging from 91 to 2,270 tons per hour. The power requirements for apron feeders are approximately twice as high as those for comparable belt feeders. Apron feeders are typically employed in situations involving truck dumps or other scenarios where very coarse materials are handled, such as in the feeding of primary or secondary crushers. When an apron feeder is intended for use under a truck dump hopper with an elongated hopper opening, it’s essential to design the hopper with a taper that widens in the direction of horizontal flow for belt feeders. Novelty Structures supplies various types of feeders such as; * Apron Feeders * Belt Feeders * Rotary Table Feeders * Screw Feeders

A screw feeder is primarily designed for handling very low-tonnage outputs, with a critical requirement for positive and controlled material discharge. This type of feeder offers the advantage of easy enclosure, making it effective at preventing the release of dust. Consequently, it allows for a sealed hopper and chute arrangement from the hopper to the delivery point. The basic structure of a screw feeder includes a helical screw that rotates below the hopper outlet and is driven by an external power source. The screw can have a fixed pitch or a variable pitch with smaller spacings in the rear and gradual increases in pitch towards the discharge end. This design ensures that the material moves efficiently within the rear portion of the hopper. Novelty Structures supplies various type of Feeders for Mineral Processing Plants. * Belt Feeders * Screw Feeders * Apron Feeders * Rotary Table Feeders

FP MY380-F AUTOMATIC ROTARY MARKER WITH SOLID INK ROLLER (Complete with device for gathering and packaging printed labels) Automatic rotary marker with feeder for hot stamping on paper, plastic, aluminum sheets, etc..; Use the proven technology of solid inkrollers, ink is activatedby heating anddrying allow simmediate and indelible impression onall printable products. The productis placed in an adjustable charger, the feeder picks individually the object to be printed and flat belts carry itunder the roller printer. The print position can be adjusted to the millimeter by two photocell and timer. The number of pieces to be printed is programmed from the keypad. Use numbers and letters(see table) for printing production date, expiration date, lot number, etc.. to preserve the traceabilityof the product. Particularly suitable for medium/ high production in the food industry and wherever there is the need to give dates on labels.

— Small-size twin screw feeder for powders or rotary tube feeder for pellets and fine-grained media — Feed rates as low as a few grams per hour — High-tech weighing system with digital load cell DigiMASS-2 for high weighing accuracy Power range 1-5 dm³/h

— Small-size twin screw feeder for powders or rotary tube feeder for pellets and fine-grained media — Feed rates as low as a few grams per hour — High-tech weighing system with digital load cell DigiMASS-2 for high weighing accuracy Power range 1-5 dm³/h

In this configuration variant, products are fed to the punching area individually from the pallet feeder and rotary punched by using a flexible die. The maximum stack height of the feeder is 100 cm. The sheet alignment on the side is performed with a register table with ball rail. The position accuracy in the direction of production is realised with a positioner roller system that causes the sheets to pass the punching cylinder with high precision without stopping. Inline configuration of the die-cutting machine with machines interfaced downstream such as folding machines, mailing systems and packaging machines is the most efficient way of carrying out multiple high-performance steps in one operation. Automatic discharging of section grids and simultaneous separation of inner cuts increase production in addition. The format range of the BSR 550 Servo is from 550 x 750 mm to 210 x 210 mm. Sheets having a product thickness between 0.5 mm and 80 g/m2 can be processed.

The mobile laser welding machine ALFlak is particularly suitable for laser deposition and contour welding on large machine components, design components as well as on injection moulds and tools The sophisticated movement mechanism of the ALFlak enables you to work comfortably on large components - you can even immerse in deep, bulky shapes with the slim laser arm. With long weld seams, the ALFlak takes advantage of its large travel axes. A weld seam with a length of up to 500 mm is possible without settling - manually or according to a specified program. Welding can be done in manual mode, semi-automatic or fully programmed. The use of an automatic wire feeder or a rotary axis is also possible. It is the versatile possibilities for mobile welding that make it a very special welding system.

Special purpose machinery, automation systems, semi or fully automated production lines, sorting and assembly turnkey solutions Rotary & CAM Indexing Systems Rotary indexing table, High performance conveyor, Palletised conveyor, Linear track systems Robotic Systems 6/7 Axis, Scara, Cartesian, Collaborative; robot programming and integration, robotics and handling, Welding, high speed pick & place, vision guided robotic system Inspection & Vision Systems Sensing, Inspection, Guidance, Quality Control, Sorting Feeding & Handling Bowl & Linear Feeders, Centrifugal Feeders, 3-Axis Vibration Feeders, Rotary Indexing Tables, Pick and Place Systems, Step Feeders, Carpet Feeders

Gland bushing in bronze for hydraulic press, tubular plate in aluminium bronze, rollers, rotary feeder in stainless steel... Alloys: - bronze and brass - low allied and pure copper - aluminium bronze - aluminium - stainless steel - Ni-based and special alloys