Valve rings - Import export

Stackable cans К.10, К.05, В.01 are fitted with cap KS.TG46 with pressure relief valve. The cap is designed for discharge of excessive pressure in plastic cans upon storage and transportation of hazardous and poisonous liquids. The cap with pressure relief valve allows usage cans for storage and transportation of gas-forming agents. Caps are fitted with sealing ring from foam polyethylene that ensure sealing, special pressure relief valve and pulling ring.

Stackable can К.20 is equipped with cap KS.TGW 60 with pressure relief valve. The cap is designed for discharge of excessive pressure in plastic cans upon storage and transportation of hazardous and poisonous liquids. The cap with pressure relief valve allows usage cans for storage and transportation of gas-forming agents. Caps are fitted with sealing ring from foam polyethylene that ensure sealing, special pressure relief valve and pulling ring.

BORSIG offers development, production and reconditioning of compressor parts, as well as their reconditioning and modification. Our product program comprises plate vales, ring valves, piston rod seals and oil scraper packings.

Lubrication of valve seals, collars, O-rings, drives, piston rods and guides Lubrication of slides, slat-band and roller chains Lubrication of cutting knives as well as of needles and lifters of knitting machines Dismantling of rusted-in parts and removal of oil and greasy soiling Advantages and benefits NSF H1 registered Highly effective due to good creep properties Broad range of uses Displaces water Duolabel Clean the surfaces for optimal effect. Apply OKS 370 with a brush, drip oiler or by immersion or using a suitable automatic lubrication system locations to be lubricated. Spray on evenly OKS 371 spray. Avoid excesses. In as far as available, observe the machine manufacturer's instructions. Assess the lubrication frequency and quantity on the basis of the service conditions. Caution: Only mix with suitable lubricants.

Lubrication of valve seals, collars, O-rings, drives, piston rods and guides Lubrication of slides, slat-band and roller chains Lubrication of cutting knives as well as of needles and lifters of knitting machines Dismantling of rusted-in parts and removal of oil and greasy soiling Advantages and benefits NSF H1 registered Highly effective due to good creep properties Broad range of uses Displaces water OKS 370 is suitable for use with the OKS Airspray system Also available as spray version OKS 371 Clean the surfaces for optimal effect. Apply OKS 370 with a brush, drip oiler or by immersion or using a suitable automatic lubrication system locations to be lubricated. Spray on evenly OKS 371 spray. Avoid excesses. In as far as available, observe the machine manufacturer's instructions. Assess the lubrication frequency and quantity on the basis of the service conditions. Caution: Only mix with suitable lubricants.

ALFAMAK is one of Turkey's leading gas spring manufacturers. Established in 2003, our company has been operating in the industry for 19 years and has gained a reputation for success. Gas spring is a new technology which comes instead of standard steel or polyurethane springs. A gas spring has a container of compressed Nitrogen gas with Piston Rod , Bush, Rod Rings, Valve etc. The Gas Springs are used in Cold Stamping industry to form, cut and fix the sheet metal inside the die. Many auxiliary materials are used for different purposes in the gas spring. Rod wiper, rod guide and rod seal are used on the inner surface of the bush. The purpose of the rod wiper is to prevent the oil and chips in the die from entering the gas spring. The rod guide is used to carry the load in case of axial force on the rod during use. The most important auxiliary material for sealing is rod/piston seal. It directly affects the performance of the product by keeping the gas in the gas spring.

[Convert R12 R22 to R134a] The Boltigen AC fitting port retrofit adapter can help you replace your old r12 r22 service port with r134a service port to meet your need. Ideal air conditioning conversion adapter kit.[Dimension] The Bcltigen Low/High pressure side retrofit adapters win convert your old 1/4“ SAE or 7/16'-20 UNF R12 R22 charging port and make it accept the R134a quick disconnect nose. Low Side, 1/4" (7/16- 20) x 13 mm (Blue). High Side, 1/4“ <7/16"- 20) x 16 mm (Red).[Excellent Sealing] The Boltigen r12 to r134a adapters built-in green O-rings, and Valve Core, for ensuring a complete hermetic seal. And the extral valve core removal tool can help you install or remove valve core according to your needs[Brass Material] The Boltigen r12 to r134a retrofit adapters are made of high qualrty brass.surface chrome plating with resistant to corrosion, and durable advantages

The modular GEMÜ 553 distribution valve comprises various globe valve modules. These can be equipped with manual or pneumatic operators. The downstream media is isolated using a PTFE seal. The valve spindle is sealed by a self-adjusting gland packing. This provides a low-maintenance and reliable valve spindle seal even after an extended period of operation. The wiper ring that is installed upstream of the gland packing also protects this against contamination and damage. The individual modules can be easily connected using screws. The seal on the connection flange and between the individual valve bodies has an FPM O-ring. Features: — Modular valve for distribution, mixing and collection applications — Freely extendable — Simple adaptation options — Diverse accessories — Simple integration of sensors — Outlets can be arranged in 90° steps — Compact design — Actuators can be easily replaced — Filters or separation of media can be easily integrated

Interchange Data: • Interchangeable to ISO16028 • Parker FEM-Series, Snap-Tite 74-Series, Hansen FF, Aeroquip/Eaton FD89, Stucchi FIRG/Series ‘A’, • Faster FFN/FFI/2FFN/2FFI, Safeway FF49-Series Seal Components: • 3/8”, 1/2”, and 3/4” nipples have molded Polyurethane valve seals,with a temperature range of -54°C to +100°C (-65°F to +212°F) • 1/4”, 5/8” and 1” to 2” nipples have Nitrile-Energised PTFE valve seals, with a temperature range of -40°C to +121°C (-40°F to +250°F) • Couplers have a polyurethane valve stem O-Ring, with a temperature range of -54°C to +100°C (-65°F to +212°F) • Ancillary coupler and nipple seals are Nitrile (Buna-N), temperature range of -40°C to +121°C (-40°F to +250°F) • PTFE or TPC-ET Anti-Extrusion ring protects main coupling valve seal from dynamic impulse pressure damage Materials: • Machined components are manufactured using solid Steel or 316 Stainless Steel bar stock • Stainless Steel balls, retaining rings, and springs maximise corrosion resistance a

17-4 PH®, a wrought compressed stainless steel powder, combines high strength and high hardness with excellent corrosion resistance, fracture toughness and heat treatment properties. When machined, 17-4 PH® produces long, gummy chips. While soft and ductile in an annealed condition, it is capable of high hardness properties with a single precipitation or aging treatment. Applications 17-4 PH® is ideal for manufacturing aircraft fittings, braces, chemical processing components, coupling, fasteners, gas turbines, gears, hydraulic actuators, jet engines, nuclear reactor parts, pump shafts, rocket and missile components, valve stems and wear rings. The physical properties of 17-4 PH® stainless steel make it weldable by common fusion and resistance techniques. Among members of the precipitation hardening class of stainless steels, 17-4 PH® has the best weldability.

Service pressure: 0-26 Mpa Service temperature: -40°C up to 85°C Reliable in filling and operation direction Small construction Corrosion-resistant All seals are suitable for CNG Certification: ECE R 110 The valve is equivalent of heavy metal regulation Burst pressure: > 100 Mpa, 20° Orfice diameter: 4, 6mm Connection: 6, 8mm tube or 3/8" Tightness: 1x10-5mbar l/s, 20°C, 100% He

Pre-compressed Packing Set of specially impregnated PTFE fiber packing Characteristics Ring set made of pure PTFE packing and PTFE compound bull rings fulfills with a tested leakage rate of 4.2 x 10 -5 mbar · l/(s·m) the leakage criteria according to VDI 2440 +200 °C with a maximum allowable leakagerate of 1 x 10 -4 mbar l/(sm) and is suitable for temperatures up to +200 °C. Operating range Pressure without LiveLoading: p 40 [bar] Pressure with LiveLoading: p 100 [bar] Temperature without LiveLoading: t +200 °C Temperature with LiveLoading: t +200 °C pH: 0 - 14 Main application Valves Flaps Gate valves Fittings Suitable for Power plant technology Chemical industry Petrochemical plants Approvals TA Luft / VDI 2440 Certificate

Braided from Expanded Graphite Tape Reinforced with Inconel Matrix and special PTFE impregnation Characteristics No slip stick effect High cross section density High temperature resistant to minimize emissions Non hardening, good reset capability Coefficient of thermal expansion similar to steel Easy to cut, install and disassemble Low coefficient of friction minimizes the adjustment force in valves Recommended as die formed rings For valve applications rings should be approx. 25 - 30 % compressed at installation Operating range Pressure [p max]: 300 bar Temperature: t = -200… +300 °C pH: 0 - 14 Density: 1.35 g/cm³ Main application Valves Fittings Gate valves Flaps Door and lid seals Suitable for Power plant technology Boiler houses High pressure applications Approvals ISO 15848-1 CC1 TA Luft 300 / VDI 2440 Form of delivery This packing can be manufactured from 4 to 40 mm square as well as in intermediate, inch sizes and special measurements. 04 - 09 mm on 1 kg spool 10 -...

Connects multiple lines simultaneously with a single operation for different fluids and sizes. Ideal for automated hydraulic or pneumatic cylinder operated systems that need to connect and disconnect several lines simultaneously. Automatic shutoff valves in both sockets and plugs ensure no outflow of fluid on disconnection. Body materials other than stainless steel are available, which can be ordered with or without valves (madetoorder products). Snap ring and screw threadin types to mount on the base plate are standardized. MAS type can accept axial eccentricity between socket and plug. The allowance of eccentricity is within the radius range of 0.3mm. Cupla connection with fluid under dynamic pressure cannot be made.

Application specific ring sets Improved properties are: Extrusion resistance, if high pressures have to be sealed and/or bigger gaps than the normally recommended max of 25 of the packing size are found. Wiper function, if any micro scaling is found on the stem and at reciprocating movement with control valves Blow out safety, when sealing high compressed gases and fumes Pliability, with low gland forces as well good reset and adaptability for example in applications with temperature cycles. Ring Set 3335 For Control Valves up to 400 °C. Ring Set 6655 For Control Valves and staem applications up to 600 °C steam. All rings are delivered as standard in skive cut. Ring Set 6660 For Valves up to 650 °C steam. This ringset offers minimal volumeloss. The rings in the sealing zone are split as standard in 2 halves or as option delivered with a skive cut. Top and bottom ring are delivered with skive cut. Soot Blower Ring Set For soot blower applications with steam temperature up to...

Multilayer construction of expanded graphite with Inconel reinforcement Practical useful application data: max. temperature in oxidizing atmosphere: +450 °C Characteristics Universal suitable, rectangular preformed Sealing tape of expanded pure graphite with Inconel reinforcement Recommended gap width 0.5 mm, maximum gap width 1.0 mm Excellent adaptability on different housing forms and ovality Excellent transformation of axial compression into radial sealing force Operating range Temperature: t = -200… +650 °C pH: 0 - 14 Practical useful application data: max. temperature in oxidizing atmosphere: +450 °C Main application Fittings Valve pressure rings Suitable for Power plant Boiler houses Recommended minimum surface pressure at assembly 20 N/mm 2 Brettschneid Tape Form of delivery 5 x 12 mm in 1 kg Spool approx. 14 mtr 7.5 x 15 mm in 2.5 kg Spool approx. 18.5 mtr 10 x 15 mm in 2.5 kg Spool approx. 14 mtr 15 x 30 mm in 5 kg Spool approx. 9.5 mtr 19 x 30 mm in 5 kg Spool...

Braided of Flexible Expanded Graphite Tape with High Temperature Metal Mesh Reinforcement Practical useful application data: max. temperature in oxidizing atmosphere: +450 °C Characteristics Universal plant wide use in static applications Extrusion stability through ultrafine 10 myh metal mesh reinforcement on each strand Non hardening, good reset capability, coefficient of thermal expansion corresponds to the coefficient of steel High temperature and pressure resistance Easy to cut, assemble and disassemble Low coefficient of friction minimizes the adjustment force in valves For valve applications rings should be approx. 25 - 30 % compressed at installation A 99 can be used as bullrings for style A 44 I, P60 and ARF Die formed rings are recommended Contains effective passive corrosion inhibitor Operating range Pressure [p max]: 500 bar Temperature: t = -200… +650 °C pH: 0 - 14 Density: 1.45 g/cm³ Practical useful application data: max. temperature in oxidizing atmosphere: +450...

Braid of Flexible Expanded Natural Graphite Tape Reinforced with Inconel Wire Practical useful application data: max. temperature in oxidizing atmosphere: +400 °C Characteristics Universal use valve packing Expanded graphite of higher quality Coefficient of expansion similar to steel For valve applications rings should be approx. 20 - 25 % compressed at installation Precompressed rings are recommended Operating range Pressure [p max]: 300 bar Temperature: t = -200… +550 °C pH: 0 - 14 Density: 1.20 g/cm³ Practical useful application data: max. temperature in oxidizing atmosphere: +400 °C Main application Valves Fittings Gate valves Flaps Plunger Door and lid seals Suitable for Power plant technology Petrochemical plants Boiler houses High pressure- and high temperature applications For higher pressure and temperature applications use suitable bullrings. Form of delivery This packing can be manufactured from 3 to 40 mm square as well as in intermediate, inch sizes and special...

Application With the PVM1 assembly set, worn valve guides can be quickly and easily removed from the cylinder head and new valve guides inserted into the cylinder head. The assembly set is particularly suitable for motorcycle, car and commercial vehicle workshops. Features The air hammer can also be used to drive valve seat inserts out of the cylinder head. For this purpose a Hunger valve seat turning device is used to turn a groove into the valve seat ring. The seat ring is driven out of the cylinder head by means of a clamping head whose expandable clamping elements engage in the groove. Handling Insert the appropriate drift pin into the pneumatic hammer and insert the drift pin into the valve guide. Switch on the compressed air supply with the control lever provided on the pistol grip of the air hammer. The valve guide is driven out of or into the cylinder head by the rapid impact sequence. A soft protective ring placed on the drift pin protects the valve guide from damage.

Working Principle: The counterbore is machined to the preset depth by the simultaneous application of both a rotary and vertical or horizontal feed motion to the carbide cutting insert. While the cutting insert rotates in a circle around the counterbore, a feed gear mechanism ensures a continuous feed motion. The lathe-type refacing action provides smooth and closely fitting contact surfaces for oversize valve seat rings. Features: The motor drive unit of the VD4HD-ADM is identical with the motor drive unit of the VD4HD Valve Seat Refacing Machine and, therefore, is only required, if no VD4HD is at hand. Two types of exchangeable boring gear heads are available. The standard AV boring head is provided with a vertical slide for counterboring. The optional AVH boring and facing head is provided with a vertical and a horizontal slide for counterboring and facing the bottom of the bore.

Advanced ceramics offer significant advantages over metals and plastics. They have in general good mechanical properties and are particularly resistant to compression. Some ceramics are very resistant to wear and friction. They also show relatively low friction coefficient and good toughness. It is also possible to achieve very good surface finishes that ensure leak tightness. Ceramics are all the more relevant when the application is associated with thermal stresses, abrasive particles or food compatibility. And ceramics are inert mateials that are resistant to many gases and acids. Applications In view of their mechanical properties and resistance to wear ceramics are found in the following mechanical industries : pumps valves dispensing units mechanical seals analyzing equipment Products Microcertec offer the following ceramic components : valve components pistons seal rings shear discs Materials There are many different types of ceramics that can meet the requirement for...

Priming Valves for Liquid Ring Vacuum Pumps Gardner Denver Nash priming valves were designed specifically to be used in Nash vacuum pump priming systems. They are extremely simple, dependable and durable. It has been proven in successful service for nearly fifty years. A Nash vacuum system is often used to prime one or more centrifugal pumps located above the free liquid levels of their suction sources. Vacuum draws liquid up until it fills each pump's suction line and floods its volute. This condition can be established before the pump is started up, so that it is always primed and ready to begin pumping. A Nash vacuum system is often used to prime one or more centrifugal pumps located above the free liquid levels of their suction sources. Vacuum draws liquid up until it fills each pump's suction line and floods its volute. This condition can be established before the pump is started up, so that it is always primed and ready to begin pumping