Mechanical clutches - Import export

DEWALT’s lead design engineer for drills was tasked with designing a high power right angle drill that is lightweight, compact, and portable. The goal with the design was to maximize performance while minimizing the size of the tool. The design would incorporate a mechanical clutch built to limit maximum torque output to 70 ft-lbs. Absent the clutch, with the huge gear reduction of 75:1, the drill would be capable of producing a lock rotor torque at the spindle of 175 ft-lbs, transmitted directly to the operator of the tool. It was determined early on that the clutching thrust required in the space available could only be achieved by a Disc Spring design. Compared to conventional coil springs, Disc Springs offer a higher load capacity in less space. Additionally, longevity and reliability is a high measure of quality for professional tools used on a daily basis. The life and performance warranty of the tool was reliant on the Disc Spring design. Visit SPIROL.

Thanks to the Inverter group it is possible to remove the entire mechanic clutch group, that has over 30 different part numbers (50 items). This upgrade also has the advantage of bringing significant savings during the maintenance phase, not just as regards the items that are removed, but also in terms of the gears, pins and bearings, since “softer” operations will prolong their productive lifetimes.

SR12 series is a high torque clutch that can move your equipment and products smoothly and stop heavy objects at any position.

SR2 provides controlled motion to adjust the height at any position. Through its inverse interrupting mechanism, this breakthrough technique conducts driving from the input shaft to the output shaft and locks the input in place even if the drive is stopped. Thanks to this new mechanism, you can easily lift heavy objects and lock them precisely into position. This new control motion is perfect for applications such as adjustable tables, handicap sinks, and more. [Benefits] ･ No power supply ･ Easy operation ･ Ready to install ･ Competitive price

A pneumatic sander is a tool that uses compressed air to power orbital sanding discs, drums, and belts. Air pressure is usually controlled by squeezing a trigger or pressing a button on the sander itself.

The application of preload to a fastener by the turning of the fastener's nut. Friction points should always be lubricated when using the torque tightening method. Torque Tightening and Preload. The amount of preload created when torquing is largely dependant on the effects of friction.

You may find various models of clutch pressure plates for both commercial and heavy vehicles in our production line as aftermarket spare parts.

Many customers ask us what ROPP is and the simple answer is Roll On Pilfer Proof closure. Simply put it is an unthreaded aluminum shell that is placed on and pressed down onto the bottle neck while thread forming wheels spin around the shell and press against it to conform to the existing threads of the bottle and locking ring. In many respects a ROPP capper resembles a chuck capper although since it is not torquing a cap there is no clutch mechanism required. ROPP capping machines are available as a single head to multiple head high speed rotary systems. The big advantage of a ROPP capper machine is that it is sealing the product at the same time it is providing tamper evident security. The big disadvantage is that it is expensive to run more than one size cap. The neck and threads of the bottle must also be hard enough to withstand the pressure required to form threads such as glass or hard plastic. The machine can be equipped with different types of cap unscrambler (vibrating

Tohnichi's AMRD series torque screwdriver provides same features as series RTD, except designed for tightening small screws. Thereby this model is ideal for assembly of watches, precision electronic equipment, computer, etc. Via micrometer scale torque can easily and quickly be adjusted. Index finger holding feature allows the operator to tighten with precise movements. Upon reaching the set torque, it clicks to signal tightening is complete. Integrated rotary clutch mechanism reliably prevents over-torque. Key Features: - Accuracy and calibration compliant to ISO 6789 type II class D - Micrometer adjustable - Clockwise direction - Click signal - Rotary clutch - Calibration certificate (ISO/JIS) incl. Options: - Counterclockwise tightening model available on request. - Optionally available in metric (gf·cm) or in english units (lbf·in, ozf·in).

Adjustable Torque Screwdriver for Small Screws (M1-M2) Tohnichi's BMRD series torque screwdriver provides same features as series RTD, except designed for tightening small screws. Thereby this model is ideal for assembly of watches, precision electronic equipment, computer, etc. Via micrometer scale torque can easily and quickly be adjusted. Index finger holding feature allows the operator to tighten with precise movements. Upon reaching the set torque, it clicks to signal tightening is complete. Integrated rotary clutch mechanism reliably prevents over-torque. Key Features: - Accuracy and calibration compliant to ISO 6789 type II class D - Micrometer adjustable - Clockwise direction - Click signal - Rotary clutch - Calibration certificate (ISO/JIS) incl. Options: - Counterclockwise tightening model available on request. - Optionally available in metric (gf·cm) or in english units (lbf·in bzw. ozf·in).

Semi-automatic rotary table pallet wrapper, model ECO/A, complete with: - Photocell for reading pallet height - Digital panel with 3 wrapping programs (up, up-down-manual) - Soft start inverter - Manual film block/cut and automatic wrapping cycle - Reset button for repositioning the film at the base of the column - Foldable column for ease of transportation - Forklift-compatible base - Mechanical clutch for film tensioning Operation: Place the pallet on the platform, secure the film to the base, select the wrapping program, and press the start button. The machine automatically begins wrapping and stops. Cut the film manually. Stretch film for wrapping machines: The film commonly used on wrapping machines is 23 microns. The film can also be used in 30 microns, suitable for protecting the pallet contents from sunlight.

The BaCo 2500 Variospeed is a fully automated filling, foil application and sealing machine, suitable for creamy to liquid filling media for plastic, tin or glass containers. Available performance versions: 2.500 units/h, 3.000 units/h or 3.500 units/h. • all gearboxes are maintenance-free: Lenze main drive, Atek gearbox, Miksch stepping gear • various cams on drive shafts of the gearbox: filling cam, control cam for valves, pre-sealing cam, lever arm for driving the metering pump and dispenser • drive shafts with prockets for chain drives • central lubricating system • 8-up turntable with mechanical overload clutch • backlog detector and monitor for incoming and outgoing containers • filling unit with turntable metering unit • 40 liters filling funnel • dispenser with pre-sealing • thermal sealing unit (conductive) • integrated conveyor belt • central, stepless height adjustment of conveyors and guides by a handwheel • integrated SPS control system Siemens S7

The water to be filtered enters via the inlet connector tangentially to the cylindrical body, it falls on the acceleration cone and increases more and more speed - The centrifugal force that is created by separating 'water the suspended solids with higher specific weight . A separation occurred the filtered water is conveyed into the outlet manifolds, while the impurities descend into the collecting tank where, special deflectors shall reset the speed preventing the ascent. The contaminant is removed drenandolo continuously or in time through the discharge valve. Uses: • For the protection of installations in which circulates industrial or domestic water. • For the protection of closed or open circuits of hot and cold water, cooling systems (in particular of the spray nozzles and the evaporating bodies). • For protection of the gland, the labyrinth seals and clutch rings Carbon mechanical seals for pumps and turbines.

Mechanical clutch used for most start and stop applications that require positive engagement and disengagement while providing overload protection. Simplified no-linkage design offers full control over clutch engagement.

The adaptability of the sensors in the premium joystick series 826 is unequalled in the field of joysticks The joystick series 826 fulfils the highest demands on quality. It shows its strengths at challenging applications with up to 2 axes, where no compromises are made when it comes to endurance and reliability, and the application asks for special sensor configurations. Die configuration options of the series 826 are unique: both axes exhibit a separated shaft for the sensors, so that the sensors, micro switches and return mechanism (spring return/friction clutch) can be adjusted individually. Especially for safety critical applications, this series is often the only series that offers the necessary options to fulfil the requirements.

Engifield provide mechanical electromechanical clutches and brakes for the industrial sector and for motion control