Industry - Import export

To dispose of waste is more and more a cost factor. Every industrial company produces a lot of general and municipal waste. With a license and an incinerator, you have a way to handle your waste problem. Be sure, incinerate municipal rubbish is an ecological, cost-effective and easy solution. In which industrial companies it is very popular Construction companies Building Chemical companies Food industry Oil and gas industry Production of raw materials Plastic industry Every kind of wood industries CBD industry Pharmaceutical industry

Incineration provides the highest destruction efficiency of waste. Slufer components and dangerous hydrocarbons from oil and gas industry, including BTEX can be incinerated, too. Our high technology constructions can achieve an efficiency of 99.9 %(DRF), depending on the materials you put in. Because of our know-how, we have automated the burning process to an optimal level with cost-economical fuel consumption. There are two kinds of incinerators: Hearth furnaces and rotary kiln. Booth are applicable in the oil and gas industry. Because of the higher sizes and quantity of disposal we recommend you to not smaller than IU-300. The best solution is IU-2000M due to its mobility and fast construction time.

Ostec offers the industrial chemistry analyzer LIOS OnLine intended for quick and safe check of processes by means of continuous onstream analysis of product’s chemical composition directly on conveyor belts or in pipelines for suspensions/liquids if such analyses are made on a real-time basis exclusive of sampling, delay in laboratory analysis and any types of hazardous radiation. LIOS OnLine analyzer will allow you to: - enhance the effectiveness and improve stability of production processes; - lower production costs of commercially useless materials removing them prior to further processing; - reduce losses in feedstock; - reduce operational costs thanks to savings in electrical energy, water and reagents due to identification of process problems at early stages; - provide your clients with quality products meeting all the requirements. Based on feedback from our customers the typical payback period of LIOS OnLine is 3-9 months only.

Multipurpose industrial IR Fourier spectrometers IROS P series are designed for routine analytical measurements in the mid-IR and near-IR region of the spectrum, in particular, qualitative and quantitative analysis of samples of organic and inorganic substances in gaseous, liquid and solid state, including films and powders. IROS P series FTIR spectrometers are based on the Michelson self-compensating interferometer which does not require dynamic adjustment and has the ability to install in the cell compartment a variety of gas and liquid cells, optical attached modules and accessories for liquid, solid and gaseous samples. Main characteristics: - Spectrometers product range with resolution up to 0.12 cm-1 - High sensitivity, rapid response - Automated measurements, easy to use - Wide range of accessories - Application software for dedicated tasks KBr/Ge/CaF2/Ge, optical windows and beamsplitter with moisture-proof coating

THE STABILIZER IMPULSE PSN380 will ensure the minimization of equipment failures, a high level of protection, a decrease in energy losses and a decrease in the downtime of critical consumers for a wide range of applications. IMPULSE PSN380 can be used not only on production lines, but also to protect equipment in cottages or offices.

BS "Bright Stock" / KS-19p oil is a high-viscosity cylinder oil, that refers to high-viscosity base oils obtained by distillation under atmospheric pressure and vacuum distillation, extraction and dewaxing of solvents from residual oils – as well as at the end of hydrotreating. The name "Bright Stock" comes from a method of producing a high viscosity cylinder oil of a bright color (Bright) by mixing naphtha with a dark colored cylinder oil, the mixture is left until winter, the wax ingredients are extracted from it, and then the naphtha liquid is distilled. BS "Bright Stock" oil is contained in gear oils, marine diesel engine oils, cylinder oils and other oils with a high viscosity index.

Base oil SN-150 is a petroleum distillation product, a base component of commercial lubricating oil. In general, base oils are produced in series with different viscosity, but with the same other characteristics. Application area Base oil SN-150 is intended for use in machines and mechanisms of industrial equipment, the operating conditions of which do not impose special requirements on the antioxidant and anticorrosive properties of oils. It is also used as a basis for the production of lubricants, mainly for motor oils production. Benefits of Base Oil SN-150 Can be used as base components in the manufacture of lubricating oils. It is possible to manufacture oils of intermediate viscosity classes (for example, I-30A) by mixing more viscous oils with less viscous oils in an appropriate proportion. In almost all cases, this oil can be replaced with doped oils of the IGP series of appropriate viscosity.

Industrial oil I-12 / I-20 / I-40A / I-50 is intended for use in various types of low and medium loaded industrial equipment, the operating conditions of which do not impose special requirements on the antioxidant and anticorrosive properties of the oil. The oils are produced on the basis of high quality mineral base components of the distillate type. The quality corresponds to All Union State standard – GOST 20799-88.

VMG3 oil belongs to the class of hydraulic fluids, and, accordingly, is intended for use in hydraulic systems. As a rule, it is used in heavy equipment - construction, logging, lifting, as well as in cargo vehicles, such as mining dump trucks. It is widely used for tracked vehicles. It favorably differs from other hydraulic oils with a low pour point, which makes it possible to use it not only in the cold season, but also in the Far North. Hydraulic drives using VMGZ can be started without preheating the oil - this is a very important factor when working in winter conditions. Another plus of VMGZ oil is its increased resistance to the formation of deposits. Anti-corrosive components maximally protect hydraulic components from negative environmental influences. The next important point is cost. VMGZ is a completely Russian development, produced from local raw materials by domestic producers.

ECOPAR 0.7 BAR LINE ЕСОPAR steam boilers are designed for generating lowpressure steam for purposes of production and heating supply of residential, public, and manufacturing buildings. ЕСОPAR steam boilers are seriesproduced in the range of nominal steamgenerating capacity from 0,1 to 10 tons per hour with a rated pressure of 0,7 bar (0,07 MPa) and designed for generating saturated steam with a temperature up to 120 °С according to the saturation point at the operating pressure. ЕСОPAR steam boilers are firetube with a passthrough furnace, threecourse version, with installed swirlers for enhanced performance and decreased combustion intensity. The boiler design makes it possible to maintain and clean the boiler flue and firetubes by opening the rotable parts of the front and the tailpiece of a boiler.

ЕСОPAR 10 bar steam boilers are designed for generating saturated steam with a temperature up to 185 °С. Their steamgenerating capacity varies from 0,1 to 10 tons per hour at a steam pressure to 1,0 MPa. The boilers can be used to obtain steam for technological purposes of enterprises, as well as generation of heat energy for the heating systems of residential, public, and manufacturing buildings. The steam boiler with flame inversion consists of a cylindrical furnace with wetted bottom, where flame forms and combustion products are being inverted. Flue gases enter the tube pack of the front tube plate and are sent toward the back tube plate, which they leave through the flue connection. The boiler design ensures low heating and surface loads in the combustion chamber. The boiler body consists of shell, furnace, boiler bottom and flat tube plates made of highquality steel.

IEEE 802.3/802.3u/802.3ab/802.3x/802.3af/802.3at/802.3bt 1K MAC, 0,5Mbit buffer, Switch fabric 8 Gbps PoE pin assignment: Mode A | Mode B | 4-pairs 1/2, 4/5(+); 3/6, 7/8(-)

Hydraulic oil HLP 32/46/68 hydraulic oils with a high level of performance. They are manufactured on the basis of highly refined petroleum base oils with a multifunctional additive package that improves filterability, antioxidant, anticorrosive, antiwear, demulsifying and antifoam properties. Designed for use in hydraulic systems of industrial equipment operating under high mechanical and thermal loads, equipped with servo-hydraulic units, proportional control systems and filter elements with a filtration rating of 3-5 microns.

Base oil SN-400 is a petroleum distillation product, a base component of commercial lubricating oil. In general, base oils are produced in series with different viscosity, but with the same other characteristics. Application area Base oil SN-400 is intended for use in machines and mechanisms of industrial equipment, the operating conditions of which do not impose special requirements on the antioxidant and anticorrosive properties of oils. It is also used as a basis for the production of lubricants, mainly for motor oils production. Benefits of Base Oil SN-400 Can be used as base components in the manufacture of lubricating oils It is possible to manufacture oils of intermediate viscosity classes (for example, I-30A) by mixing more viscous oils with less viscous oils in an appropriate proportion In almost all cases, this oil can be replaced with doped oils of the IGP series of appropriate viscosity.

ЕСОPAR 10 bar steam boilers are designed for generating saturated steam with a temperature up to 185 °С. Their steamgenerating capacity varies from 0,1 to 10 tons per hour at a steam pressure to 1,0 MPa. The boilers can be used to obtain steam for technological purposes of enterprises, as well as generation of heat energy for the heating systems of residential, public, and manufacturing buildings. The steam boiler with flame inversion consists of a cylindrical furnace with wetted bottom, where flame forms and combustion products are being inverted. Flue gases enter the tube pack of the front tube plate and are sent toward the back tube plate, which they leave through the flue connection. The boiler design ensures low heating and surface loads in the combustion chamber. The boiler body consists of shell, furnace, boiler bottom and flat tube plates made of highquality steel.

ЕСОPAR 10 bar steam boilers are designed for generating saturated steam with a temperature up to 185 °С. Their steamgenerating capacity varies from 0,1 to 10 tons per hour at a steam pressure to 1,0 MPa. The boilers can be used to obtain steam for technological purposes of enterprises, as well as generation of heat energy for the heating systems of residential, public, and manufacturing buildings. The steam boiler with flame inversion consists of a cylindrical furnace with wetted bottom, where flame forms and combustion products are being inverted. Flue gases enter the tube pack of the front tube plate and are sent toward the back tube plate, which they leave through the flue connection. The boiler design ensures low heating and surface loads in the combustion chamber. The boiler body consists of shell, furnace, boiler bottom and flat tube plates made of highquality steel.

ЕСОPAR 10 bar steam boilers are designed for generating saturated steam with a temperature up to 185 °С. Their steamgenerating capacity varies from 0,1 to 10 tons per hour at a steam pressure to 1,0 MPa. The boilers can be used to obtain steam for technological purposes of enterprises, as well as generation of heat energy for the heating systems of residential, public, and manufacturing buildings. The steam boiler with flame inversion consists of a cylindrical furnace with wetted bottom, where flame forms and combustion products are being inverted. Flue gases enter the tube pack of the front tube plate and are sent toward the back tube plate, which they leave through the flue connection. The boiler design ensures low heating and surface loads in the combustion chamber. The boiler body consists of shell, furnace, boiler bottom and flat tube plates made of highquality steel.

ЕСОPAR 10 bar steam boilers are designed for generating saturated steam with a temperature up to 185 °С. Their steamgenerating capacity varies from 0,1 to 10 tons per hour at a steam pressure to 1,0 MPa. The boilers can be used to obtain steam for technological purposes of enterprises, as well as generation of heat energy for the heating systems of residential, public, and manufacturing buildings. The steam boiler with flame inversion consists of a cylindrical furnace with wetted bottom, where flame forms and combustion products are being inverted. Flue gases enter the tube pack of the front tube plate and are sent toward the back tube plate, which they leave through the flue connection. The boiler design ensures low heating and surface loads in the combustion chamber. The boiler body consists of shell, furnace, boiler bottom and flat tube plates made of highquality steel.

ЕСОPAR 10 bar steam boilers are designed for generating saturated steam with a temperature up to 185 °С. Their steamgenerating capacity varies from 0,1 to 10 tons per hour at a steam pressure to 1,0 MPa. The boilers can be used to obtain steam for technological purposes of enterprises, as well as generation of heat energy for the heating systems of residential, public, and manufacturing buildings. The steam boiler with flame inversion consists of a cylindrical furnace with wetted bottom, where flame forms and combustion products are being inverted. Flue gases enter the tube pack of the front tube plate and are sent toward the back tube plate, which they leave through the flue connection. The boiler design ensures low heating and surface loads in the combustion chamber. The boiler body consists of shell, furnace, boiler bottom and flat tube plates made of highquality steel.

ЕСОPAR 10 bar steam boilers are designed for generating saturated steam with a temperature up to 185 °С. Their steamgenerating capacity varies from 0,1 to 10 tons per hour at a steam pressure to 1,0 MPa. The boilers can be used to obtain steam for technological purposes of enterprises, as well as generation of heat energy for the heating systems of residential, public, and manufacturing buildings. The steam boiler with flame inversion consists of a cylindrical furnace with wetted bottom, where flame forms and combustion products are being inverted. Flue gases enter the tube pack of the front tube plate and are sent toward the back tube plate, which they leave through the flue connection. The boiler design ensures low heating and surface loads in the combustion chamber. The boiler body consists of shell, furnace, boiler bottom and flat tube plates made of highquality steel.

ЕСОPAR 10 bar steam boilers are designed for generating saturated steam with a temperature up to 185 °С. Their steamgenerating capacity varies from 0,1 to 10 tons per hour at a steam pressure to 1,0 MPa. The boilers can be used to obtain steam for technological purposes of enterprises, as well as generation of heat energy for the heating systems of residential, public, and manufacturing buildings. The steam boiler with flame inversion consists of a cylindrical furnace with wetted bottom, where flame forms and combustion products are being inverted. Flue gases enter the tube pack of the front tube plate and are sent toward the back tube plate, which they leave through the flue connection. The boiler design ensures low heating and surface loads in the combustion chamber. The boiler body consists of shell, furnace, boiler bottom and flat tube plates made of highquality steel.

ЕСОPAR 10 bar steam boilers are designed for generating saturated steam with a temperature up to 185 °С. Their steamgenerating capacity varies from 0,1 to 10 tons per hour at a steam pressure to 1,0 MPa. The boilers can be used to obtain steam for technological purposes of enterprises, as well as generation of heat energy for the heating systems of residential, public, and manufacturing buildings. The steam boiler with flame inversion consists of a cylindrical furnace with wetted bottom, where flame forms and combustion products are being inverted. Flue gases enter the tube pack of the front tube plate and are sent toward the back tube plate, which they leave through the flue connection. The boiler design ensures low heating and surface loads in the combustion chamber. The boiler body consists of shell, furnace, boiler bottom and flat tube plates made of highquality steel.

ЕСОPAR 10 bar steam boilers are designed for generating saturated steam with a temperature up to 185 °С. Their steamgenerating capacity varies from 0,1 to 10 tons per hour at a steam pressure to 1,0 MPa. The boilers can be used to obtain steam for technological purposes of enterprises, as well as generation of heat energy for the heating systems of residential, public, and manufacturing buildings. The steam boiler with flame inversion consists of a cylindrical furnace with wetted bottom, where flame forms and combustion products are being inverted. Flue gases enter the tube pack of the front tube plate and are sent toward the back tube plate, which they leave through the flue connection. The boiler design ensures low heating and surface loads in the combustion chamber. The boiler body consists of shell, furnace, boiler bottom and flat tube plates made of highquality steel.

ЕСОPAR 10 bar steam boilers are designed for generating saturated steam with a temperature up to 185 °С. Their steamgenerating capacity varies from 0,1 to 10 tons per hour at a steam pressure to 1,0 MPa. The boilers can be used to obtain steam for technological purposes of enterprises, as well as generation of heat energy for the heating systems of residential, public, and manufacturing buildings. The steam boiler with flame inversion consists of a cylindrical furnace with wetted bottom, where flame forms and combustion products are being inverted. Flue gases enter the tube pack of the front tube plate and are sent toward the back tube plate, which they leave through the flue connection. The boiler design ensures low heating and surface loads in the combustion chamber. The boiler body consists of shell, furnace, boiler bottom and flat tube plates made of highquality steel.

ЕСОPAR 10 bar steam boilers are designed for generating saturated steam with a temperature up to 185 °С. Their steamgenerating capacity varies from 0,1 to 10 tons per hour at a steam pressure to 1,0 MPa. The boilers can be used to obtain steam for technological purposes of enterprises, as well as generation of heat energy for the heating systems of residential, public, and manufacturing buildings. The steam boiler with flame inversion consists of a cylindrical furnace with wetted bottom, where flame forms and combustion products are being inverted. Flue gases enter the tube pack of the front tube plate and are sent toward the back tube plate, which they leave through the flue connection. The boiler design ensures low heating and surface loads in the combustion chamber. The boiler body consists of shell, furnace, boiler bottom and flat tube plates made of highquality steel.

ЕСОPAR 10 bar steam boilers are designed for generating saturated steam with a temperature up to 185 °С. Their steamgenerating capacity varies from 0,1 to 10 tons per hour at a steam pressure to 1,0 MPa. The boilers can be used to obtain steam for technological purposes of enterprises, as well as generation of heat energy for the heating systems of residential, public, and manufacturing buildings. The steam boiler with flame inversion consists of a cylindrical furnace with wetted bottom, where flame forms and combustion products are being inverted. Flue gases enter the tube pack of the front tube plate and are sent toward the back tube plate, which they leave through the flue connection. The boiler design ensures low heating and surface loads in the combustion chamber. The boiler body consists of shell, furnace, boiler bottom and flat tube plates made of highquality steel.

ECOPAR 0.7 BAR LINE ЕСОPAR steam boilers are designed for generating lowpressure steam for purposes of production and heating supply of residential, public, and manufacturing buildings. ЕСОPAR steam boilers are seriesproduced in the range of nominal steamgenerating capacity from 0,1 to 10 tons per hour with a rated pressure of 0,7 bar (0,07 MPa) and designed for generating saturated steam with a temperature up to 120 °С according to the saturation point at the operating pressure. ЕСОPAR steam boilers are firetube with a passthrough furnace, threecourse version, with installed swirlers for enhanced performance and decreased combustion intensity. The boiler design makes it possible to maintain and clean the boiler flue and firetubes by opening the rotable parts of the front and the tailpiece of a boiler.

ECOPAR 0.7 BAR LINE ЕСОPAR steam boilers are designed for generating lowpressure steam for purposes of production and heating supply of residential, public, and manufacturing buildings. ЕСОPAR steam boilers are seriesproduced in the range of nominal steamgenerating capacity from 0,1 to 10 tons per hour with a rated pressure of 0,7 bar (0,07 MPa) and designed for generating saturated steam with a temperature up to 120 °С according to the saturation point at the operating pressure. ЕСОPAR steam boilers are firetube with a passthrough furnace, threecourse version, with installed swirlers for enhanced performance and decreased combustion intensity. The boiler design makes it possible to maintain and clean the boiler flue and firetubes by opening the rotable parts of the front and the tailpiece of a boiler.

ECOPAR 0.7 BAR LINE ЕСОPAR steam boilers are designed for generating lowpressure steam for purposes of production and heating supply of residential, public, and manufacturing buildings. ЕСОPAR steam boilers are seriesproduced in the range of nominal steamgenerating capacity from 0,1 to 10 tons per hour with a rated pressure of 0,7 bar (0,07 MPa) and designed for generating saturated steam with a temperature up to 120 °С according to the saturation point at the operating pressure. ЕСОPAR steam boilers are firetube with a passthrough furnace, threecourse version, with installed swirlers for enhanced performance and decreased combustion intensity. The boiler design makes it possible to maintain and clean the boiler flue and firetubes by opening the rotable parts of the front and the tailpiece of a boiler.