Safety locks - Import export

Secure restraining of lifted loads Compact and safe The design principle allows for the creation of highly compact clamping heads. They are ideal for applications involving purely static securing. Series KRG, KRGP For static or slow-moving masses Compact design One load direction

Rod leaving clamping head Auto Bleeder Mechanical Safety Catcher KRM Electric Locking Unit KFE Special customer requirements Applications Overview Presses Machine Tools Automatization + Feeders Lifting Gear + Mobile Hydraulics Production Technology Special Machinery CAD Download Contact Mechanical Valve Actuator MVA Secure the rupture of a chain with the full comfort of a pneumatic SITEMA clamping head When a load has to be secured against rupture of a suspension device (e.g. a chain), many customers use our Mechanical Safety Catcher KRM. This unit has the advantage to hold the load immediately upon rupture of the suspension device. Additional sensors to detect rupture of a chain are not necessary. On the other hand, it is not possible to activate the KRM in a user-defined position without rupture of the suspension device, e.g. for maintenance purposes. Here, the Mechanical Valve Actuator MVA comes to your rescue. It is simply put between the suspension device and the...

Mechanical Safety Catcher KRM Electric Locking Unit KFE Special customer requirements Applications Overview Presses Machine Tools Automatization + Feeders Lifting Gear + Mobile Hydraulics Production Technology Special Machinery CAD Download Contact Auto Bleeder The SITEMA Auto Bleeder has been specially designed for the use with a SITEMA clamping head. It makes sure that the hydraulic system is constantly bled. Air bubbles in the hydraulic fluid might combust spontaneously under certain conditions (so-called Diesel effect). As a consequence, seals and sealing surfaces can be damaged, causing leakages. Clamping heads are especially susceptible for this phenomenon, as they have only a very small hydraulic volume and are not flushed through at each activation. Air can therefore easily accumulate in the clamping head. This is the reason why the usual initial bleeding at commissioning is often not enough, especially when the line leading to the clamping head points upwards...

Mechanical Valve Actuator MVA Rod leaving clamping head Auto Bleeder Mechanical Safety Catcher KRM Electric Locking Unit KFE Special customer requirements Applications Overview Presses Machine Tools Automatization + Feeders Lifting Gear + Mobile Hydraulics Production Technology Special Machinery CAD Download Contact Electropneumatic module EPM The Electropneumatic Module EPM acts as interface between (electrical) power supply / control and a pneumatic SITEMA clamping head. All pneumatic SITEMA clamping heads with an operating pressure of up to 4 bar and an operating volume of up to 220 cm³ can be pneumatically controlled by the EPM. It is also possible to operate several clamping heads in parallel with one EPM. The EPM is controlled by a 24V supply and switching voltage. The outlet pressure which is required to open or keep open a pneumatic clamping head is controlled by a control signal. If the voltage fails or the input signal is switched off, the pressure is...

Hubbell offer very secure connection systems for hight and medium current. Switching boxes for hight and medium loads and currents. The connection materials from HUBBELL wiring-Devices are matching the safety standarts of NEMA and OSHA. The connection system is covering a wide range of connectors, You do have the STRAIGHT BLADE range of connectors as the Safety TWIST-LOCK as a HUBBELL-LOCK range and a Circuit-lock. The classification of the connectors is done regarding the load and the current they can carry and the polarization is depending from those features. some connectors can carry up to 600 Amp

SOL-CARE™ Safety Syringe have a manual retractable needle mechanism. It is designed to prevent needlestick injuries and syringe reuse by retracting the needle into the barrel and snapping off the plunger after injection. Compatible with all standard hypodermic needles. Easy to use. Fingers remain behind the needle during activation of safety mechanism. Clear and bold scale markings. Visual and audible confirmation of safety mechanism activation. PRODUCT BENEFITS • Compatible with all standard hypodermic needles. • Easy to use. • Fingers remain behind the needle during activation of safety mechanism. • Clear and bold scale markings. • Visual and audible confirmation of safety mechanism activation.

SOL-CARE™ Safety Syringe have a manual retractable needle mechanism. It is designed to prevent needlestick injuries and syringe reuse by retracting the needle into the barrel and snapping off the plunger after injection. Compatible with all standard hypodermic needles. Easy to use. Fingers remain behind the needle during activation of safety mechanism. Clear and bold scale markings. Visual and audible confirmation of safety mechanism activation. PRODUCT BENEFITS • Compatible with all standard hypodermic needles. • Easy to use. • Fingers remain behind the needle during activation of safety mechanism. • Clear and bold scale markings. • Visual and audible confirmation of safety mechanism activation.

Handy barrier post system for extra safety and order – the 1.8 metre tape, 3 integrated tape fasteners and attached safety lock ensure safe, flexible and needs-based use anywhere.

Ergonomically optimized plastic assortment box with removable inserts. Ideal for drills, screws and small parts High transparency lid offers optimum visibility to contents User-friendly, easy grasp features on both sides 90° swiveling, retractable handle; additional safety lock prevents accidental opening

The WOMA highpressure guns convince by their simple handling. Thus, the handle is ergonomically designed, the trigger can be operated easily. Furthermore a rotatable hose connection (DSA) prevents the formation of loops of the highpressure hose. As with all WOMA products, safety has top priority, this applies also to the highpressure guns. The handle is fully insulated, a safety lock prevents accidental actuation.

A showcase in a class of its own that sets standards in quality and functionality. High-quality processed and anodised aluminium profiles or, on request, powder-coated in RAL colours. Single-pane safety glass, permanent ventilation, scratch-resistant and magnetic rear wall in aluminium silver, vandalism safety locks with patented frost protection and gas pressure springs with secure 85° open position, optional LED lighting - the TN series leaves nothing to be desired. Whether as a wall or floor model, in foyers or in front of buildings. And everything with ten years warranty!

The hook for forks MKFP 100 is made from a sturdy steel frame suitable for insertion of forks with section max. mm. 135x50, screws for locking to the forks and lifting swivel hook fitted with a safety lock. The fork hook allows you to safely lift loads up to 1000 Kg. Before purchasing it is essential to make sure that your lifter is certified to raise up 1000 Kg, considering installing this hook at about half the length of the forks.

Safety Clamping for Rail Systems Holding force 540 N Always on the safe side: The safety clamping elements LOCKED SL clamp and brake directly on the clear area of guide rails on linear modules with forces of up to 10,000 N. They are individually adjusted to the linear guide being used and are available for all rail sizes from 20 to 65 mm and profiles from all renowned manufacturers. Special brake pads made of low wear sintered metal are used for the additional emergency stop braking functions in the safety clamping elements LOCKED SL. The SL product family offers optimum static clamping with a service life up to 1 million cycles or up to 500 emergency braking operations. They also offer low system costs in comparison with hydraulic and electric solutions.

Product highlight •Noble cbuy.ch design in natural style •Enough for approx. 1450 ignitions •Incl. child safety lock & turning wheel •Filled with isobutane gas •Compact size for home & travel Lighter in cbuy.ch-design – Fire & Flame Small, handy, chic and with about 1,450 ignitions a real long-lasting burner. The pure isobutane gas ensures a consistent flame. cbuy.ch-Lighters from BIC® are childproof and meet all international safety standards. What makes our cbuy.ch-Lighter so unique Less than a third1 of all lighters available on the European market meet European safety standards in terms of flame height, flame stability, flame extinguishing and child safety. That’s why we chose the “little ones” from BIC®. They fit comfortably in the hand, deliver a consistent stable flame around 1,450 times and meet or even exceed the requirements of international standards (ISO 9994, EN 13869, ASTM F400 and US SPSC).

Main features • Short mixing time • Extremely high mixing quality • Batches with repeatable and scalable results • Mixing ratio 1/100.000 • Coefficient of variation (CV): ≤ 3 % • Low maintenance • Functional design for installation in R&D area Techanical features • Batch size: 1,4 / 3 / 7 / 20 liters (net) • Cylindrical mixing chamber • MIxing tools: ploughshare / ploughshare with toothed design / Mix Paddle / Mix Paddle with toothed design • Material of costruction: AISI 304 / AISI 316 / AISI 316Ti • Discharge door with round profile, building the bottom side of the mixing chamber • Front side inspection door complete with safety electric lock • Electric control panel with inverter for speed variation of the main rotor shaft • Internal finishing with roughness Ra 0.5-0.8 µm

Main features • Short mixing time • Extremely high mixing quality • Batches with repeatable results • Mixing ratio 1/100.000 • Coefficient of variation (CV): ≤ 3 % • Low maintenance Techanical features • Batch size: from 65 to 28.000 liters (net) • Cylindrical mixing chamber • MIxing tools: ploughshare / ploughshare with toothed design / Mix Paddle / Mix Paddle with toothed design • Material of costruction: carbon steel / Hardox 450 / AISI 304 / AISI 316 / AISI 316Ti • Inspection door complete with safety electric lock • Discharge door with round profile, building the bottom side of the mixing chamber • Rotor shaft with turned and coaxial ends • Rotor shaft sealing system with packing seals and wear resistant ferrules to protect the rotor shaft, prepared for flushing with air / nitrogen

It is a consumable used in perfusor devices to give a drug to the patient at a certain time and at a certain rate. Since its tip can be locked in the form of a luer lock, it minimizes drug leakage and wrong drug delivery. There are two types, transparent and light sensitive. It is available in 2/3ml,5ml,10ml,20ml,50/60ml transparent and light sensitive (orange) sizes according to needs. Manufactured according to DIN EN ISO 7886. Our perfuser injectors, which have been used for a long time throughout Turkey with their wide product range, are compatible with all devices. Sterile, non-toxic, apyrogenic It has a latex-free double sealed piston with a special safety brake. With luer-lock connector. It has 15Gx1″ needles. PVC-free blister pack, Gamma(R) and/or E.O. has been sterilized. Opaque injectors are available in Black and Orange color options. Air bubbles and possible particles in the fluid can be easily observed in the orange injector.

Bench cutter with lever, portable, suitable for cutting of cardboard corners. Equipped with ergonomic handle with safety latch to lock it when the cutter is not in use and a small compartment for storing rulers, blades, markers and pens and leave the workbench ordered. Operation is very simple, simply enter the portion of the corner you want to cut into the slot and pull the lever down. The cutter is used during packaging operations to cut safety corners, normally 2 meters long, into smaller pieces to be placed on the corners of boxes and pallets to strengthen them and protect them during transport.

Main features • Mixing times adaptable to the specific process • Extremely high mixing quality • Constant quality of the product output • Mixing ratio 1/100.000 • Coefficient of variation (CV): ≤ 3 % • Low maintenance Techanical features • Hourly productivity: from 500 to 1.200.000 liters/h • Cylindrical mixing chamber • MIxing tools: ploughshare / ploughshare with toothed design / Mix Paddle / Mix Paddle with toothed design • Material of costruction: carbon steel / Hardox 450 / AISI 304 / AISI 316 / AISI 316Ti • Inspection door complete with safety electric lock • Vertical discharge door with adjustable internal diaphgrams to regulate the production capacity • Rotor shaft with turned and coaxial ends • Rotor shaft sealing system with packing seals and wear resistant ferrules to protect the rotor shaft, prepared for flushing with air / nitrogen

Load capacity: Class A (15kN test load) EN 124 Materials: Frame in extruded aluminium. Cover in extruded aluminium bonded to a composite aluminium honeycomb panel (with a white coating). Stainless steel screw connections. EPDM seal. High-quality gas-lift struts. Features: Modern lightweight-construction access cover with maximum ease of opening. Major weight-savings compared to concrete-filled access covers. Extremely easy to open thanks to gas-lift struts. A safety device is fitted, locking the cover in the raised position. As the cover is not filled with concrete, installation is quicker and simpler. There is a recess of 24mm for laying slabs, tiles, parquet etc. In the case of thin tiles, the difference in height can be compensated for by using a suitable tile adhesive (MAPEI Keralastic) and waterproof building board. Sealed design with a very high-quality finish. Very attractive surface, particularly the visible edges. Inconspicuous corner joints make it easy to connect...

Load capacity: Class A (15kN test load) EN 124 Materials: Frame in extruded aluminium. Cover in extruded aluminium bonded to a composite aluminium honeycomb panel (with a white coating). Stainless steel screw connections. EPDM seal Features: modern lightweight-construction access cover. Major weight-savings compared to concrete-filled access covers. The cover is lifted by the hinge, significantly reducing the effort required. A safety device is fitted, locking the cover in the raised position. As the cover is not filled with concrete, installation is quicker and simpler. There is a recess of 24mm for laying slabs, tiles, parquet etc. In the case of thin tiles, the difference in height can be compensated for by using a suitable tile adhesive (MAPEI Keralastic) and waterproof building board. Sealed design with a very high-quality finish. Very attractive surface, particularly the visible edges. Inconspicuous corner joints make it easy to connect tiles, slabs etc. Opening with the...

Main features • Management of the process time and temperature through the heat exchanger • Short mixing time • Extremely high mixing quality • Batches with repeatable results • Mixing ratio 1/100.000 • Coefficient of variation (CV): ≤ 3 % • Low maintenance Techanical features • Batch size: from 65 to 28.000 liters (net) • Cylindrical mixing chamber • MIxing tools: ploughshare / ploughshare with toothed design / Mix Paddle / Mix Paddle with toothed design • Material of costruction: carbon steel / Hardox 450 / AISI 304 / AISI 316 / AISI 316Ti • Inspection door complete with safety electric lock • Discharge door with round profile, building the bottom side of the mixing chamber • Rotor shaft with turned and coaxial ends • Rotor shaft sealing system with packing seals and wear resistant ferrules to protect the rotor shaft, prepared for flushing with air / nitrogen • Heat exchanger on mixing chamber for heating / cooling processes

Main features • Short mixing time • Extremely high mixing quality • Batches with repeatable results • Mixing ratio 1/100.000 • Coefficient of variation (CV): ≤ 3 % • Low maintenance • Easy deep cleaning Techanical features • Batch size: from 65 to 28.000 liters (net) • Cylindrical mixing chamber • MIxing tools: ploughshare / ploughshare with toothed design / Mix Paddle / Mix Paddle with toothed design • Material of costruction: carbon steel / Hardox 450 / AISI 304 / AISI 316 / AISI 316Ti • Full access to mixing chamber through the extractable rotor shaft • Inspection door complete with safety electric lock • Discharge door with round profile, building the bottom side of the mixing chamber • Rotor shaft with turned and coaxial ends • Rotor shaft sealing system with packing seals and wear resistant ferrules to protect the rotor shaft, prepared for flushing with air / nitrogen

SOL-GUARD™ product line covers a safety-engineered Syringes with Fixed Needle for various types of injections. It is designed to reduce the risk of needlestick injuries to patients and healthcare workers before and during the injection process. PRODUCT BENEFITS • Transparent Locking Safety Shield with Easy Grip Ridges Protects during transportation. • Transport Position Eliminates the need to recap the neeedle after draw-up of medication. • Low Dead Space Reduces medication waste. • Clear and Bold Scale Markings

HYDRAULIC DRUMS TILTER MOD. DA-FP 45 for metal or plastic drums. The new drums-tilter mod. DA-FP 45 is equipped with hook and safety band and is suitable for lifting, transporting, emptying both 210 liter metal and plastic drums. Equipped with hydraulic system with pedal or rudder drive, push handles, angular transmission with practical handwheel for drum rotation, hook and safety band to lock the drum, nylon wheels with high smoothness and brake. The lifter can also be used as a stacker for stacking or for positioning the drums on shelves with a maximum height of 1500 mm. The rotation also allows the drum to be placed horizontally at a height of 1650 mm from the ground. RAL 1028 yellow painting. Attention: the drum turner is suitable for handling metal drums or plastic drums with rim (as in the photo). Do not use for different drums.