Smooth-running - Import export

IKO Linear Roller Way Super X is a highperformance roller type linear motion rolling guide with 4 rows of wellbalanced cylindrical rollers arranged in parallel in a highrigidity casing. This allows for smooth running, high reliability, stable high accuracy and rigidity. Even when heavy load or fluctuating load is applied, it has low elastic deformation and is stable, making it suitable when vibration or shock is applied. Models are available in a wide range of performances and sizes, and can be selected according to the application.

Franke Bearing Assemblies Type LVA are ready-to-install bearing assemblies with steel housing rings and integrated bearing element. They are suitable for medium rotational speeds and accuracies. They are available at short notice, some of them even from stock. Designed as 4 point bearings, they can support equally high loads from all directions and are insensitive to shocks and vibrations. Type LVA bearing assemblies are sealed on both sides and adjusted with preload.

high quality trigger sprayer, smooth-running, made entirely of plastic

high quality trigger sprayer, smooth-running, made entirely of plastic

high quality trigger sprayer, modern design, smooth-running, made entirely of plastic

high quality trigger sprayer, modern design, smooth-running, made entirely of plastic

high quality, light trigger sprayer with large output, modern design, smooth-running, made entirely of plastic

high quality, light trigger sprayer with large output, modern design, drip-free, smooth-running, made entirely of plastic

high quality, light trigger sprayer with large output, modern design, smooth-running, with pre-compression (for fine and consistent output), made entirely of plastic

high quality, light trigger sprayer with large output, modern design, smooth-running, with pre-compression (for fine, consistent and drip-free output), made entirely of plastic

With smooth running wheels and 2 brakes Loading volume up to: 25 Simson 50 Silex or Sunny 27 Alex 30 stacking chairs

high quality, light trigger sprayer with large output, modern design, smooth-running, with pre-compression (for fine, consistent and drip-free output), made entirely of plastic

Suitable aftertreatments can render precision O‑rings and X‑rings suitable for specific requirements. Typical requirements are low friction, easier installation (automatic or manual), lifelong lubrication, smooth running and non stick effect. Coating is a process frequently used for surface treatment. The IDG application consultants are available to discuss specific requirements with you.

Franke FDA linear guides are equipped with very quiet, smooth-running, high-quality needle bearings and are made almost entirely of lightweight aluminum. The sealed roller bearings enable maintenance-free operation over the entire service life. Rail elements can be manufactured in lengths from 200 mm to 4000 mm and can be coupled endlessly

with drive shaft made of stainless steel The submersible pump was particularly developed as vertical, wet-installed submersible pump for quick emptying containers and pools Features: High pump capacity High level of efficiency Smooth running Small space requirement Fast assembly Simple commissioning Easy to service

INOX® octane booster improves starting behavior and full-load drive, releases and disperses deposits and residues in the fuel system. It ensures a smooth running in neutral gear. It eliminates and prevents deposits on valves and combustion chambers, thus preventing mechanical damage. It also increases the octane number of the fuel by up to 4 - 9 points, depending on the fuel quality. Especially recommended for fuels of lesser quality.

Franke FDA linear guides are equipped with very quiet, smooth-running, high-quality needle bearings and are made almost entirely of lightweight aluminum. The sealed roller bearings enable maintenance-free operation over the entire service life. Rail elements can be manufactured in lengths from 200 mm to 4000 mm and can be coupled endlessly.

Franke bearing elements type LER are suitable for medium rotational speeds and accuracies. They convince by smooth running, high dynamics and compact installation space. Due to the straight contact surfaces, they can be easily integrated into the surrounding design and have a high rigidity. The low price makes the bearing element of type LER an economical solution. LER are generally mounted without clearance. The preload can be individually adjusted according to the requirements.

Franke FDC linear guides are equipped with very quiet, smooth-running, high-quality needle bearings and are made almost entirely of lightweight aluminum. Inlaid raceways made of corrosion-resistant steel make them insensitive to environmental influences as well as moisture or cleaning agents. Rail elements can be manufactured in lengths from 200 mm to 4000 mm and can be coupled endlessly.

Franke FDC linear guides are equipped with very quiet, smooth-running, high-quality needle bearings and are made almost entirely of lightweight aluminum. Inlaid raceways made of corrosion-resistant steel make them insensitive to environmental influences as well as moisture or cleaning agents. Rail elements can be manufactured in lengths from 200 mm to 4000 mm and can be coupled endlessly.

Franke slim bearings of the type LSA convince by their smooth running, extremely compact installation space, simple mounting and favourable price. Slim bearings of type LSA consist of an inner and outer race with hardened and profiled raceways and a plastic cage with retained balls. The rolling elements rest against the raceways at two points each, thus maintaining the 4-point system. The raceways are split and can therefore be changed elastically in diameter for installation.

Franke bearing elements type LEW are suitable for medium rotational speeds and accuracies. They convince by smooth running even under tilt moment loads, high rigidity and compact installation space. The crosswise arranged rollers can support high loads from all directions. Bearing elements of model LEW are insensitive to shock and vibration. They offer the greatest possible flexibility in terms of preload, running characteristics and diameter ranges.

The latest development in lifting platform technology is based on mechanical drive technology using belts. Hydraulic oil is not required. Due to a patented catch system, BELT-LINE meets the safety requirements laid down in DIN EN 1570. The combination of exemplary positioning accuracy, smooth running and long service life is the reason the BELT-LINE is an economical precision solution, and not only for sensitive areas. Exemplary smooth running BELT-LINE convinces with a low noise and harmonious movement sequence, paired with maximum lifting speed and positioning precision. Minimum maintenance time and costs without hydraulic oil In particular in sensitive areas, the robust BELT-LINE technology with its long operating life is the best possible solution. The low-wear components can be quickly replaced due to the modular design. Excellent load change behaviour In the design phase, particular emphasis was placed on developing an excellent load change behaviour. The resilient suspension behaviour is only surpassed by LAWECO push-chain lift platforms.

2-phase stepper motors Our 2-phase stepper motors are reliable and low-cost drives with a long service life. They are available in different sizes and types of power output, are continuously developed and are thus suitable for a variety of applications. AC servo motors The AC servo motors meet the highest demands regarding dynamics and accuracy and are used if dynamic, exact positioning or smooth running characteristics are required. The different types of power output and sizes cover the most diverse requirements. The benefits at a glance Highly dynamic High efficiency Long service life

"The velcro drive board for perfect connection with demanding pad backs. – perfect hold of velour backs and the softest pads – dampening effect for a smooth machine run – equals uneven ground surfaces – when using cro-connect with integrated cro-lock it provides a perfect hold of the pads even when lifting the brush unit Pad operating widths: 16"" - 18"""" Water hole: with / without Including matching cro-connect"

Keiper PU molded timing belts (form belts), which are cast in special molds, are made of abrasion-resistant polyurethane and high-strength steel cords (or aramid cords). The cast PU timing belt is an exact replica of its mold. Consequently, high pitch accuracy along the entire length of the belt is realized. They are particularly well suited for smooth running and high speeds. By combining high-quality materials and this modern production method, the resulting timing belts exhibit supreme mechanical, chemical and physical properties. Mechanical properties: Low longitudinal tolerance Longitudinal stability, negligible elongation Form-fit, synchronous running Low noise High abrasion resistance Favorable performance-weight ratio Chemical properties: Good ageing resistance Operating temperature range from -30°C to +80°C Resistant to simple oils, greases and gasoline Applications All types of drives Office machines Textile machines Wood-processing machines

OIL HEATER FAN IDE 50The indirectly fired oil fan heater IDE 50 ensures clean, dry hot air Indirectly fired air heaters such as the oil heater fan IDE 50 are an ideal solution to provide large amounts of clean and dry hot air, as it is required for the heating of construction sites, marquees, exhibition halls, workshops or stables. Longer outdoor applications are no problem for the oil heater fan IDE 50, because it is provided with a durable housing made of doubly coated material, borne by a smooth-running carriage construction with cable holders and installed fuel tank. When employing the optionally available flue gas discharge, this heating device can also be flexibly used for the fully automatic heating of closed rooms.

Elastomer sleeves are available on request for Franke LSA slim bearings. They are used for tolerance compensation and for vibration decoupling. The smooth running can be significantly increased by an elastomer sleeve. Elastomer sleeves for the LSA 6/8 also offer additional sealing of the bearing due to the overlapping of the edges. Elastomer sleeves for Franke slim bearings are available from stock. They can be ordered when you buy a slim bearing and are then included in the delivery. For series production, elastomer sleeves are available by the meter for self-cutting. We recommend gluing the ends with cyanoacrylate glue (e.g. Loctite 406). The use of the elastomer sleeve slightly reduces the stiffness and accuracy of the bearing. The basic static load rating of the bearing also decreases slightly. We would be happy to advise you on the design and construction.

With the newly developed FAPI-SWITCH series, we have succeeded in designing deflection pulleys in a lightweight system design with an unprecedented smoothness and smoothness of running that set new standards in the belt grinding process. Due to the flexibility, also with regard to different dimensions, belt elephant machines of all brands can be equipped with these deflection rollers. We would be pleased to advise you on which return pulleys can be used in your processing, in order to achieve top process results.