Spray paints - Import export

Acrylic based, fast drying, solvent based, protective and decorative spray paint. Inside and outside, wood, metal, glass, ceramic, plastic, paper, cardboard, concrete making flowers etc. used on surfaces such as Machinery, spare parts, steel goods, wooden furniture, hard plastic, hobby and handicrafts, motorcycle/bicycle/auto etc. It is suitable for use in areas such as Resistant to fading, harsh weather conditions and water. It is scratch and impact resistant. It is lead-free, does not contain CFC gases that pollute the atmosphere and are harmful to the ozone layer.

Preparation is always the key to a successful project, take your time to clean, treat any rust, rub down and mask the area. You will need to purchase a grey primer and apply at least two coats of the primer to ensure optimum adhesion and to give the best finish. When you are ready to apply the paint, build up the colour with several thin coats, rubbing down with wet and dry sandpaper in between coats to ensure a professional finish. For metallic and pearlescent colours it is essential to purchase a lacquer, which will give a high gloss finish to solid colours.

Compact and modular paint spray booth

Modular paint spray booth

Airless Spray Gun, Paint Sprayer

Our wet painting booths are manufactured as standard or custom design according to the customer’s needs. For the cabin selection, the dimensions of the parts and the targeted capacity are the determining elements. Our booths are made of stainless steel or galvanized sheet and fully assembled with bolts. In our wet painting booth with solid filter, the air is sucked through the filters by exhaust fans while the unused wet paint is held by paper or fiber filters. And the clean and healthy environment is created by supplying the fresh air to the environment. Teflon (non-stick), solvent based and water based paint applications can be applied in our wet painting booths. We also design Flash off and Positive Pressure rooms for our wet paint plants. In flash off rooms, solvent separation process of painted parts is done. The solvent that released in these rooms is removed by exhaust fans and a healthy working environment is obtained.

Conveyors that we use for painting plants and various transfer lines are the most important parts of the automatic systems. Commonly used Webb, Kardan and Power & Free type conveyors are projected and put into used by us. Semi-automatic conveyor lines are also produced for lower production capacities.

The dipping system which is one of the other methods is produced with a robot or crane controlled. The systems are equipped with the most efficient heating, ventilating and PLC control equipment. In our dipping lines manufacturing, AISI 304- AISI 316 stainless sheets of steel and polypropylene are used. The system should be selected according to the shape of the part, the area to be used and the corrosion resistance. Some chemicals which are used for surface cleaning must be applied hot. Due to this situation, our company produces cold dipping lines as well as natural gas heated, electric heated, liquid fuel heated and water heated dipping pre-treatment lines according to the energy source that is planning to be used.

Powder and Wet paint equipment must be determined and selected carefully according to the properties of the parts to be painted. In our systems, we use the highest quality, most efficient and most reliable, manual and automatic powder and wet paint guns, single and multi-axis robots.

Penetrant non-destructive testing method is a system that is used for the detection of cracks in the surfaces of parts. After the material which is going to be subjected to penetrant test is pre-cleaned, it is subjected to penetrant application as dipping or spray. After this process, the material is rinsed and dried. Powder “developer” is applied electrostatically on the dried material. Finally, possible cracks and faults on the material are detected by checking under the UV lamp.

It is the furnaces where the hardening process of various aluminum profiles is happened, in other words, the aging process. Aluminum profiles are loaded into the furnace with the help of loading cars. The profiles which are kept in the oven at about 185 °C for 6-8 hours will be harden with the aging process. The whole operation is programmed with the PLC control unit. Thanks to its safe guillotine doors, they contribute to the air circulation in the interior and provide security with the locking mechanisms.

Our wet painting booths are manufactured as standard or custom design according to the customer’s needs. For the cabin selection, the dimensions of the parts and the targeted capacity are the determining elements. Our booths are made of stainless steel or galvanized sheet and fully assembled with bolts. In our wet painting booth with water curtain, the air is sucked through the water curtain by exhaust fans while the unused wet paint is held by water. And the clean and healthy environment is created by supplying the fresh air to the environment. Teflon (non-stick), solvent based and water based paint applications can be applied in our wet painting booths. We also design Flash off and Positive Pressure rooms for our wet paint plants. In flash off rooms, solvent separation process of painted parts is done. The solvent that released in these rooms is removed by exhaust fans and a healthy working environment is obtained.

Our powder paint booths are manufactured as standard or custom design according to the customer’s needs. For the cabin selection, the dimensions of the parts and the targeted capacity are the determining elements. Our booths are made of stainless steel or galvanized sheet and fully assembled with bolts to easy disassembling. Recycling is done with the cyclones in our powder coating booths with cyclone. It is preferred because it allows easy and fast color change. The powder particles which are not used passes through the cyclone unit before the filter unit. While the particles go down through cyclones with centrifugal effect, the particle that cannot be reused is sent to the filter unit and filtered there. The parts which are suitable for recycling are recycled to the system for reuse. Multi and mono type cyclone units are used in our booths. Both types offer efficiency with recycling systems, practicality with easy color changing. In filter cabins, it is necessary to change

Our powder paint booths are manufactured as standard or custom design according to the customer’s needs. For the cabin selection, the dimensions of the parts and the targeted capacity are the determining elements. Our booths are made of stainless steel or galvanized sheet and fully assembled with bolts to easy disassembling. In our powder paint booths with filter, the air is sucked through the filters while the unused powder particles are held by filters. The filters are automatically and periodically pumped air in reverse direction to direct the powder paint that held by filters to the sieve tanks which is under the cabinet for reusing. As a result of this process, the unused powder paint is recycled. Polyester-Teflon and Sinter-Lamellar type filters are used in our booths. Polyester-Teflon filters are preferred due to their low cost and Sinter-Lamellar filters are preferred due to their long filter life. Both types offer efficiency with recycling systems, economical solution

The main part of the powder coating lines that we have produced is powder coating booths. Powder coating booths are used to apply powder coating on the material under the most ideal conditions after the surface cleaning process and to prevent the paint particles that cannot hold onto the work piece from being escaped to the environment. Electrostatically charged dye particles adhere to the surface with maximum efficiency and homogeneous spread. The system is preferred because; non-adherent powder is reusable with the recycling system in the booths. As Rota Makine, we design lines with conveyor and robots to offer our esteemed customers who want to make production with high capacity, automation and untouched. Our powder coating booths are categorized as With Filter and With Cyclone because of their different advantages. Powder enameling cabinets for enamel applications are also available in our scope of production. Our powder enamel booths are produced

Our Infrared ovens can be produced as conveyor belt tunnel or internal return (U) type. Our ovens have andirect heating system with radiation heat transfer. They are used due to the cure flat shaped parts after wet or powder coating paint applications. They are preferred because they can cure the paint three times faster than the convectional type ovens. They can be produced with natural gas or lamp type infrareds. The inner surfaces of our ovens’ panels are produced with a galvanizedor stainless steel sheets and the outer surfaces are produced with galvanized sheet steel coated with electrostatic powder paint. Considering the application temperature, the required thicknesses determined and rock wool or glass wool is used for insulation.

Our continuous type ovens can be produced as belt tunnel type, internal return (U) type or with span conveyor. Our ovens have the indirect heating thermo-block system with convection heat transfer. It can be manufactured according to power supply sources like electricity, gas or liquid fuel. The inner surfaces of our ovens’ panels are produced with galvanized sheet and the outer surfaces are produced with galvanized sheet steel coated with electrostatic powder paint. Considering the application temperature, the required thickness (usually 160 mm) is determined and only rock wool is used for insulation. Air curtains in the furnace are placed inlet and outlet of the oven to minimize heat loss while increasing the efficiency.

Our box type ovens have the indirect heating thermo-block system with convection heat transfer. It can be manufactured according to power supply sources like electricity, gas or liquid fuel. The inner surfaces of our ovens’ panels are produced with galvanized sheet and the outer surfaces are produced with galvanized sheet steel coated with electrostatic powder paint. Considering the application temperature, the required thickness (usually 160mm) is determined and only rock wool is used for insulation. For paint applications up to 220 °C, for special purposes up to 400 °C ovens can be produced by our company. The doors of our box type furnaces can be produced as double-sided, top opening or as guillotine door according to needs.

The industrial ovens we produce are used to dry the water and chemical particles remaining on the material after the surface cleaning, moreover to finish the chemical reaction of the paint, after painting process. Our ovens are renowned in the sector for their heat homogenization, give the opportunity to long term usage with trust and designed for maximum efficiency in a frame of our respect for nature policy.

In the spraying pre-treatment method, applying chemicals with a certain pressure on the parts creates big positive differences on paint quality and life span. By cleaning and coating the surface of the part before painting, the paint will retain its first-day quality with out any degradation for long years by strong adhesive forces. Our spray tunnels, with the help of automation systems, allow you to be able to produce automatically and continuously with out any touch. Tunnel type spray surface cleaning lines consist of parts like spray nozzles, heat exchangers, dosing pumps and ventilating systems. In our spray lines, the AISI 304 – AISI 316 stainless sheets of steel and polypropylene are used. According to needs of our esteemed customers, horizontal belt type conveyor, compact type, and rotary table type automatic plc controlled washing machines can be produced by us. Some chemicals which are used for surface cleaning must be applied hot. Due to this situation

Pre-treatment is the first step of the painting process. This is why it has crucial importance. By cleaning and coating the surface of the part before painting, the paint will retain its first-day quality with out any degradation for long years by strong adhesive forces. A quality product is possible with a quality surface pre-treatment.

Filters made at our factory in Nantes (France) This filter uses the same principle than Standard Pleated Cardboard Filter with a polyester media sticked at the back in order to increase filtration efficiency for dry dusts. Advantages of this filter : - Lifetime up to 3-4 times longer than other filtering medias on the market - Better filtration efficiency than Standard Pleated Cardboard Filter - Easy installation and manipulation This filter can be used in all spray booths with horizontal and vertical airflow. Construction : This filter is made of 2 layers of recycled kraft paper, perforated, pleated and glued with a polyester media at the back. The quality of kraft paper (250g/m²) guaranties rigidity of the filter in all positions. Standard widths : - 1m - 0,90m - 0,75m Other dimensions and cuts on demand.

Filters made at our factory in Nantes (France) Standard Filtr’Overspray is well adapted to filtration of paint overspray in spray booths. It is easy to manipulate and to stock. Its lifetime, 6 times longer than other filtering medias on the market, allows to make important costs reductions. This filter is perfectly adapted to filtration of any wet overspray particles (paints, varnishes, gel coat, glue, silicone, polyester etc…) Advantages of this filter : - Lifetime up to 6 times longer than other filtering medias on the market - Easy installation and manipulation - Environment friendly materials according to ISO 14000 - Adapted to filtration of solvent paints and water based paints This filter can be used in all spray booth with horizontal and vertical airflow.

We have successfully adapted many of the adhesion promoters (developed for the Coil Coating process) for spray and brush application. Various adhesion promoters for NR, NBR, HNBR, EPDM, SBR, FPM, PVC, PP, ABS, PA, PU, TPE... are available.