Threaded bars - Import export

At Prokura we sell over 4000 products relating to threaded rod. Brass Zinc Galv A2 A4 Mild Steel High Tensile

Prokura's cut stud service. We can cut bespoke lengths of threaded rod from 150mm to 3000mm in length.

The energy costs of a compressed-air system are decisively influenced by the pressure drop occurring during compressed-air filtration. To maintain the required operating pressure, this pressure drop needs to be compensated by correspondingly higher compressor performance. The consequence: increased energy demand, premature wear of the compressor ... and therefore higher costs. The better solution: CLEARPOINT compressed-air filters by BEKO TECHNOLOGIES.

DVK 6 pipe couplings are designed for a quick and safe use in suction conveying. massive aluminium clamps (double secured) screws M 8 with massive threaded bars very easy to mount due to circular version black natural rubber gasket temperature-resistant from -20°C to +60°C) white temperature-resistant EPDM gasket (-30°C to +120°C), food-safe optionally available with silicone gasket (-60°C to +200°C)

plunger Ø 20 mm, stroke 8 mm off-position extended contact by spring force pipe thread G1/4 max. 500 bar, as per data sheet B1.921

plunger Ø 35 mm, stroke 10 mm off-position retracted contact with air pressure, with return spring pipe thread G1/4 max. 500 bar, as per data sheet B1.921

DVK 6 pipe couplings with quick closure accelerate mounting in suction conveying with constant safety. The clamping lever can be locked in any desired position by a simple upward pull. A high clamping force develops due to optimal length of lever Additionally DVK-6 pipe couplings with quick closure offer the following characteristics: double secured massive aluminium clamps screws M 8 with massive threaded bars very easy to mount due to circular version black natural rubber gasket (-20°C to +60°C) white EPDM gasket (temperature-resistant from -30°C to +120°C), food-safe optionally available with silicone gasket (temperature-resistant from -60°C to +200°C)

Also DVK-HD® pipe couplings with traction relief are ideal for a quick and safe use for pressure conveying. Their characteristics are equal to DVK-HD® pipe couplings: double secured massive aluminium clamps screws M12 with massive threaded bars very easy to mount due to circular version, nitrile gasket is temperature-resistant from -20°C to +80°C and safe for use with food optionally available with silicone gasket (-60°C up to +200°C) Additionally pipe couplings of type DVK-HD® with traction relief have the following product specifications: monobloc pipe coupling with traction relief with bridge part to safeguard against axial forces material: couplings in aluminium, clamps in galvanized steel pipe clamps and traction bars traction-resistant

DVK-HD® high pressure pipe couplings are perfect for a quick and well-priced mounting for pressure conveyors. They have the following characteristics: for outer pipe diameter from 60.3 to 206.0 mm length: 100, 150, 200 mm or longer metal casing made of aluminium AlMgSi 0.5 F22 massive aluminium clamps (double secured) screws M12 with massive threaded bars pressure-resistant up to maximum of 12 bar (see table) vacuum-resistant up to maximum of 0.8 bar (see table) circular version, therefore very easy to mount white EPDM gasket or nitrile gasket, temperature-resistant and food-safe optionally available with silicone gasket (-60°C to +200°C) Mounting these pipe couplings is safe and hazard-free because no welding works are necessary. They also can easily be dismantled – connecting pieces and pipes can be reused.

plunger Ø 20 mm, stroke 8 mm off-position retracted contact with air pressure, with return spring pipe thread G1/4 max. 500 bar, as per data sheet B1.921

plunger Ø 35 mm, stroke 10 mm off-position extended contact with air pressure pipe thread G1/4 max. 500 bar, as per data sheet B1.921

plunger Ø 35 mm, stroke 10 mm off-position extended contact by spring force pipe thread G1/4 max. 500 bar, as per data sheet B1.921

Cable Cutters Wire Rope Cutters Rebar Cutters Steel Cutters Chain Cutters Chain Blasters Cutter for Wire of Prestressed Concrete Flat Bar Cutters Thread Cutters Nut Splitters Nibblers for Sheet Metal Cable Stripping Tools Sheat Peeling Tools

plunger Ø 20 mm, stroke 8 mm off-position extended contact with air pressure pipe thread G1/4 max. 500 bar, as per data sheet B1.921

plunger Ø 16 mm, stroke 6 mm off-position retracted contact with air pressure, with return spring pipe thread G1/4 max. 500 bar, as per data sheet B1.921

plunger Ø 16 mm, stroke 6 mm off-position extended contact by spring force pipe thread G1/4 max. 500 bar, as per data sheet B1.921

plunger Ø 40 mm, stroke 18 mm extending hydraulically contact by spring force separate locking port metallic wiper edge pipe thread G1/4 max. 500 bar, as per data sheet B1.911

plunger Ø 40 mm, stroke 18 mm extending hydraulically contact by spring force metallic wiper edge pipe thread G1/4 max. 500 bar, as per data sheet B1.911

ar feeder for special profiles wanted ? To extend the MULTI 3000 to the bar feeder for special profiles, the Uni-erector can be mounted optionally. It enables the erection of rectangular profiles and special profiles for further transport to connected machine tools. Thus a smooth reloading process is possible. By simply setting a parameter, the erector can be selected or deselected. This enables a quick changeover from round material to a special profile. By deactivating it, the bar loader can load round or hexagonal material as normal. While with activated parameter the bar feeder will load the special or rectangular profile while the reloader is erecting. The use of square material is also optionally possible. The erector consists of two opposite rollers. To erect the material, these rollers move together during reloading. When the bar is threaded into the machine tool, the rollers open again. The distance between the rollers can be easily adjusted.

The Repico® SD – Slip type coupling two locks is designed to replace traditional pipe joining methods(welded, flanged, threaded etc.). Sealing against 10.7 bar (165psi) maximum and it has a progressive sealing. Max. angular deflection 5°. Completely made out of stainless steel 316. Green PTFE coated bolts. No special tools or skilled people are required to install the Repico® pipe couplings. Light weight appr. 30% in comparison with flanged connections. Quick to install (minutes). It requires limited space for installation, just a bit bigger than the pipe OD. Connects different materials. No transition couplings required, allows pipe section replacement. 60% noise reduction compared to rigid connections.

The PROJECTOR LIFT MVS 40-25 is studied in order to support large and heavy Professional and Home Cinema video projectors up to 25 Kg. of weight. The lift has been developed to be installed inside a very narrow false ceilings of only 14 cm. granting the best aesthetic and practical solution in hiding the projector, lift and cables. The MVS 40-25 is supplied with a powered and extremely silent motor that allows a descent from a minimum of 14 cm to a maximum of 54 cm. Moreover it is supplied with extendable side brackets in order to allow an easy fixing of the panel of your false ceiling by adjustable threaded bars. The lift MVS 40-25 is equipped with two safety screws which prevents the lift to extent further to the preset end stop. *ceiling cover plate not included

The PROJECTOR LIFT MVS 200 is studied in order to support large and heavy video projectors up to 25 Kg. of weight. The MVS 200 is supplied with an extremely silent motor that allows a descent from a minimum of 14,5 cm. to a maximum of 196 cm. Moreover it is supplied with extendable side brackets in order to allow an easy fixing of the panel of your false ceiling by adjustable threaded bars. The panel can be mounted under the projector, even if the projector is larger as the lift itself. The lift MVS 200 is equipped with two safety screws that prevent the lift to extent further to the preset end stop. * ceiling cover plate is NOT included

The PROJECTOR LIFT MVS 200-15 is a versatile and innovative product that enables the installation of the projectors in environments where particular aesthetical solutions are needed. MVS-200-15 is supplied with an extremely silent motor that allows a descent from a minimum of 23 cm.to a maximum of 190 cm. and can carry up to 15kg. Moreover, the MVS 200-15 is supplied with a particular system that allows an easy fixing of a panel of your false ceiling by the threaded bars whose height is adjustable. One more interesting element of this lift has a cables gathering system with a raceway where to put the cables of the projector, so they will be hidden and tidy gathered together when the projector lift is going up. The lift is supplied with two safety screws.

The PROJECTOR LIFT MVS 100-25 is studied in order to support large and heavy video projectors up to 25 Kg. of weight. The MVS 100-25 is supplied with an extremely silent motor that allows a descent from a minimum of 14 cm. to a maximum of 97 cm. Moreover it is supplied with extendable side brackets in order to allow an easy fixing of the panel of your false ceiling by adjustable threaded bars. The panel can be mounted under the projector, even if the projector is larger as the lift itself. The lift MVS 100-25 is equipped with two safety screws that prevent the lift to extent further to the preset end stop. *ceiling cover plate not included

Bossong injected anchors with sock and Presstec grout with TBOS bars. Stainless steel threaded bars. Couplers, turnbuckers, nuts, standard end and architectural end plates.

Designed for high performance and reliability, our Subsea Pulling System provides the following benefits: Compact design Long Piston Stroke - 4" (102mm) 10,000 psi (700 bar) systems Rapid assembly using Quick Release Reaction Nuts High strength threaded bar Anti-Slip surfaces Operated via separate diver control valve providing precise control for up to 4 pullers Compact Design Designed to fit ANSI B16.5, MSS SP44, API 6A and most other flange applications dedicated flange hole adapters. Hydraulic Anchor Collet Release Anchor collet automatically grips wire rope (without hydraulic pressure). Collets can be fully released by applying hydraulic pressure. Auto Advance Collet Release Advance collet fully disengages when the pulling cylinder is fully retracted Manual Retract Collet Release Retract collet can be manually disengaged, allowing the pulling cylinder (including Advance and Retrace collets) to be removed from the wire rope while the rope is installed in the flanges. Also...

WIND TENSIONERS Our tensioners have quality designed in with standard features that enhance durability and efficiency to get the job done faster and safer: Quality Means Lower Life-Cycle Costs: Achieves 90% proof load requirement for ISO 898 Grade 10.9 bolts Fully enclosed load cell eliminates debris in piston retraction mechanism Auto-Engaging Geared Nut Rotator Self-energizing, long life seals Enhanced Usability: Piston stroke limit indication High pressure swivel coupling (swivel is optional on WSS & WSL) 19,580 psi (1,350 bar maximum operating pressure) Automatic piston retraction mechanism Designed with Safety in Mind: Overstroke prevention for safe operation Anti-slip grip surface Tool lifting-strap as standard WSS & WSL FOUNDATION WIND TENSIONERS Suitable for ISO Metric threaded and all-thread bars Geared or Manual Nut Rotator Long & short stroke models Maximum operating pressure 19,580 psi (1350 bar) Uses standard system 'nut' for reaction Contact factor for op