Pneumatic - Import export

If you are hot foil printing large items or lengthy runs, a pneumatic machine (air machine) may be the ideal solution you need. Pneumatic hot foil stamping machines deliver the same results consistently, no matter how large your hot foil requirements may be.

High Pressure Control Valve is designed and developed for applications where the high pressure / drop liquid and high pressure / temperature gas/vapour to be handled. Our specially designed Velocity Control Trim, which is a multi turn / multistage velocity control trim, handles these severe/critical applications very effectively – eliminating cavitation & vibration, and reducing the noise to the acceptable levels.

Turbine bypass valves play a very major role in Power Plant applications. Within a short period of twenty four hours, a power plant may be required to operate at minimum load, increase to maximum capacity for major part of the day, immediately lower back to minimum load and then back to maximum capacity. Bypass System permit unit start up and shutdown in a lifesaving manner for critical heavy components in boiler and turbines. Jet Flow Bypass valves are supplied with hydraulic, electric or pneumatic actuators as per the process requirements alongwith complete control systems as an option.

Pneumatic sieving equipment to remove oversize contamination within blowing lines. For more details, please send us a message or click on the website link.

A Variable Flow Erectors are pneumatically / Electrically operated single nozzle ejectors, used to handle the variable suction ad discharge conditions wherein pneumatically / electrically operated needle goes in and out for precise controlling the flow rate based on pressure requirement. It is very useful when a low pressure steam is compressed to a higher pressure level.

Maintain constant visibility in the harshest conditions with our marine wiper systems. Designed specifically for marine use and manufactured using durable marine tested materials, they’re built to withstand the toughest of environments. We offer three types of marine wiper systems, Clearview wiper, Straightline wiper and Pantograph wiper systems. Each wiper system has its own range of benefits and operational types, from electric to pneumatic; single and twin blades. Once installed, these wipers are robust, durable and need little maintenance.

The Rotary Selector Valve or RSV, is a small bore multiport, multibank rotary poppet system suitable at pressures ranging –1 +10 Bar, Fluid Temperature 85°C (185°F) . It is a relatively simple & therefore extremely reliable unit, based on a modular design & as such configurable for a multitude of applications. It is custom built from stock parts. The body is manufactured in brass or stainless steel, both having stainless spindles & they can have stems and seals in differing materials to suit the media being used. Each bank of the valve is pneumatically independent but linked by a common central spindle, enabling separate air paths to be controlled concurrently; each output is effectively a valve. The RSV (once also known as the PIV or Pneumatic Interlok Valve) can incorporate an integral electrical rotary switch which allows fluid & electrical circuits to be controlled simultaneously or can be used simply to provide positional indication remotely at the control centre.

The BGP base can be used with any BGP series piston, allowing testing from 15 mbar to 120 bar. The base requires a supply of gas slightly above test pressure, and has precision inlet / outlet valves and a screwpress to enable easy regulation and adjustment of pressure. The BGP1 has a 1/2in2 high chrome steel piston/cylinder unit. The design has been proven over many years to provide excellent sensitivity and stability. Low start pressure is achieved through use of a hollow piston and aluminium head. NOTE: Model BGP1 can be used on vacuum with a model 24 adaptor. All certificates issued for Budenberg Dead-weight Testers are fully traceable to national standards via equipment with UKAS calibration certificates.

Military and Naval equipment has some of the most demanding specifications and requirements of any machinery. It has to. Lives depend on it. From the frozen arctic tundra to hot humid jungles, from arid sand-blown deserts to the windswept salt spray of the oceans, military equipment is exposed to every conceivable environment on the planet. Military hardware is often stored unused for months or years at a time, but then must be ready to move and operate at a moment’s notice. The hydraulic cylinders used in this equipment must be of the very best quality. Gidrolast makes them. Gidrolast cylinders are carefully designed and engineered, using only the finest construction materials, and are precision-manufactured with cutting edge industrial equipment. The result is cylinders that meet the toughest military and naval specifications.

Hydraulic cylinders used on shipboard machinery or in shipyards must endure the toughest of conditions, including hot and cold temperature extremes, exposure to salt water, driving rain, ice, as well as dirt and many other forms of contamination. That is an extremely abusive environment for hydraulic actuators. Cylinders used under these conditions must be designed and manufactured with these well in mind if they are to survive and work reliably. In addition, many hydraulic cylinders used on ships and harbour cranes are very large-bore and very long-stroke. Their large size makes frequent repair or replacement simply out of the question. Other marine cylinders are mounted in a ship’s machinery that is very difficult to reach. All these factors makes reliability a primary concern for marine cylinders. Gidrolast has a great deal of experience in building marine-grade hydraulic cylinders that thrive under those trying conditions.

Fork lift trucks, pallet loaders, conveyors, cranes, and so on. These machines are at the heart of any facility moving materials and products. These machines also depend on the power of hydraulic cylinders to do their work. That means that the cylinders have to be reliable. A failure means loss of production and profit. At Gidrolast, we appreciate that. We build our cylinders to last with precision machining and using heavy-duty seals and bearings. Our factory uses the latest high-technology production methods including robotic welders, friction welders and skive roller burnishing. Our quality control methods are the best in the business. And to cap it off, all of our cylinders are 100% pressure tested before they leave our factory. That means that our customers are 100% confident when they mount a Gidrolast mast cylinder into the bowels of their fork lift truck or assemble a lift cylinder under a heavy-duty conveyor.

The pneumatic height adjustment systems, VariStand and VariBase, are professional and design-oriented total solutions for 1-leg table applications (for example side tables, overbed tables, bistro tables). They are especially characterized by easy handling and plug & play assembly. VariStand and VariBase convince in application due to the high-quality and convenient operation of the height adjustment.

Cross+Morse offer low cost protection devices that prevent machine and drive damage: the original Torque limiters for an economical and durable solution and the Sheargard range for more accurate torque control and shaft synchronisation.

PNEUMATIC WINCH A 20 GP2 Speed 25.0 m/min, WLL 1st layer 500 kg. A range of standard pneumatic winches with high effi ciency gearbox, developed for heavy duty pulling and lifting duties up to 2,700 kg. This broad range comprises a variation of very compact winches with vane or gear motors. Drum lengths can easily be adapted to the customers request. STANDARD FEATURES - High efficiency transmission - A series: right angle helical gearbox - F series: in line helical gearbox - A/F LV: Rotary vane motor - A/F GP: Contact less maintenance free gear motor - Steel drum (not grooved) with cable fixing point at flange - Two drum supports - Three layer 2-component conservation according ISO 12944 category C4-High, colour RAL 1023 - Automatic disc brake - Lever operated proportional control valve - FEM / ISO class: T3-L3-M4 ** Ask for a quote **