Control cable - Import export

Fluoropolymers (ETFE, FEP, PTFE, PFA) Silicone, PEEK ™, Kapton ® Also available in all common UL styles

Heater Air Panel Control Bowden Cable For VW Transporter T5 T6 AMAROK 2010-2020

Initiator cables, also referred to as sensor/actuator cables, connect control units and different sensors, or, in the case of reversal of the measurement principle, actuators. Frequently used abbreviations include ini or ini cable (plural: inis). Sensor or measurement transducers transform physical quantities such as rotation, speed, distance or length into analogue electric impulses. In the case of an actuator, the measured electric current (symbol: I, unit: ampere; A) or voltage (symbol: U, unit: volt; V) is transformed into temperature, pressure or torque. The connection cable consists of at least three cores with a small cross-section of between 0.14mm² and 0.34mm². In the simplest case, two cores are required for supplying the voltage, while the last core transmits an I/O signal. For sensitive applications, there are shielded versions in addition to the traditional ini cables to avoid EMC disruptions (electromagnetic compatibility).

Under remote control panes can be manoeuvred in up to 4 axes and set safely and easily in any height and position, even with an up to 300 kg load. Fitted with cable remote control.

Base and rotary table aluminium alloy. Hollow shaft stainless steel. Preloaded worm gear steel. Claw coupling aluminium with polyurethane coupling spider. Version Aluminium alloy anodised. Note for ordering The unit is supplied with the position of cable outlet or control unit as shown in the drawing. Note Rotary positioning stages for motorised adjustment and positioning tasks. The preloaded worm gear runs virtually playfree. The bearing of the worm shaft offers maximum radial rotational accuracy. Cables can be routed through the large bore in the hollow shaft. The adjustable positioning ring is used to determine the rotational reference point to the position of the assembled part. Proximity switches can be mounted with the optionally available sensor holder (21094). The suitable programming software and interface cable for the stepper motor with positioning control are available as accessories (2500015).

The VIKING-500 PRO semiautomatic welding machine has two-piece design, is designed for power supply from a three-phase 380V network and produces 500A at a load of 60%. The design feature consists in a separate feeding mechanism that can be removed from the source to a control cable length of up to 15 meters. The device heats up the product to a minimum, which allows you to work with thin metals. An important feature is the presence of a two-shaft motor for the wire inch (four rollers), which significantly improves the stability and smoothness of the welding material feeding. Special software functions significantly increase the performance factor of the device. ... Key features of VIKING MIG 500 PRO: - digital control of the device; - advanced software settings; - dot welding mode 2T and 4T; - setting of a smooth drop of the termination current; - adjustable inductance; - forced gas purging; - forced wire inch; - the presence of a 36 V socket (for connecting a CO2 gas heating regulator

These winches are used for both hoisting and pulling of loads. These worm gear winches are equipped with a cable drum free spool, making it possible for the cable to be easily pulled from the drum, due to the fact that the cable drum can be detached from the transmission. As an extra option, it is possible to have an adjustable slipping brake on the cable drum which allows for a controlled release of the cable. As well as this, these winches can be mounted in such a way that allows for the cable to come free from the winch horizontally. The Gebuwin range of hand driven worm gear winches are known for their robust construction. The listed capacities refer to the hoisting capacities which are calculated according to the first cable layer on the cable drum. In the case of these winches being used for the pulling of loads, the hoisting capacity should be multiplied roughly by a factor of 2.5. The worm gear winches are equipped with a load pressure brake. This brake holds the load at...

These winches are used for both hoisting and pulling of loads. These worm gear winches are equipped with a cable drum free spool, making it possible for the cable to be easily pulled from the drum, due to the fact that the cable drum can be detached from the transmission. As an extra option, it is possible to have an adjustable slipping brake on the cable drum which allows for a controlled release of the cable. As well as this, these winches can be mounted in such a way that allows for the cable to come free from the winch horizontally. The Gebuwin range of hand driven worm gear winches are known for their robust construction. The listed capacities refer to the hoisting capacities which are calculated according to the first cable layer on the cable drum. In the case of these winches being used for the pulling of loads, the hoisting capacity should be multiplied roughly by a factor of 2.5. The worm gear winches are equipped with a load pressure brake. This brake holds the load at...

These winches are used for both hoisting and pulling of loads. These worm gear winches are equipped with a cable drum free spool, making it possible for the cable to be easily pulled from the drum, due to the fact that the cable drum can be detached from the transmission. As an extra option, it is possible to have an adjustable slipping brake on the cable drum which allows for a controlled release of the cable. As well as this, these winches can be mounted in such a way that allows for the cable to come free from the winch horizontally. The Gebuwin range of hand driven worm gear winches are known for their robust construction. The listed capacities refer to the hoisting capacities which are calculated according to the first cable layer on the cable drum. In the case of these winches being used for the pulling of loads, the hoisting capacity should be multiplied roughly by a factor of 2.5. The worm gear winches are equipped with a load pressure brake. This brake holds the load at...

These winches are used for both hoisting and pulling of loads. These worm gear winches are equipped with a cable drum free spool, making it possible for the cable to be easily pulled from the drum, due to the fact that the cable drum can be detached from the transmission. As an extra option, it is possible to have an adjustable slipping brake on the cable drum which allows for a controlled release of the cable. As well as this, these winches can be mounted in such a way that allows for the cable to come free from the winch horizontally. The Gebuwin range of hand driven worm gear winches are known for their robust construction. The listed capacities refer to the hoisting capacities which are calculated according to the first cable layer on the cable drum. In the case of these winches being used for the pulling of loads, the hoisting capacity should be multiplied roughly by a factor of 2.5. The worm gear winches are equipped with a load pressure brake. This brake holds the load at...

These winches are used for both hoisting and pulling of loads. These worm gear winches are equipped with a cable drum free spool, making it possible for the cable to be easily pulled from the drum, due to the fact that the cable drum can be detached from the transmission. As an extra option, it is possible to have an adjustable slipping brake on the cable drum which allows for a controlled release of the cable. As well as this, these winches can be mounted in such a way that allows for the cable to come free from the winch horizontally. The Gebuwin range of hand driven worm gear winches are known for their robust construction. The listed capacities refer to the hoisting capacities which are calculated according to the first cable layer on the cable drum. In the case of these winches being used for the pulling of loads, the hoisting capacity should be multiplied roughly by a factor of 2.5. The worm gear winches are equipped with a load pressure brake. This brake holds the load at...

Versatile working with GEDA inclined lifts. Features: -Easy to transport, even in a car or on a trailer. -Assembly without tools -Easily operated even by an untrained helper -230 V alternating current connection is sufficient -Adaptable for any construction site and any transport situation Basic unit consisting of: -Electric winch 230 Volt / 50 Hz with 43 m rope ( 6 mm) -21 m limit switch cable, control with emergency stop and 5 m cable (24 Volt) -standard sledge with rope breakage safety device -head section with quick release pulley -foot section 2 m -control and limit switch pluggable Scope of delivery package 2 : 1 x basic unit Lift 250 Comfort 4 x ladder section 2 m (200/250 kg load capacity) 1 x ladder section 1 m (200/250 kg load capacity) 1 x articulation piece 20° to 45° steplessly adjustable 1 x universal platform