Results for

Installation of automation systems - Germany

148 Companies

21 Products

IMW - WOLFGANG MÜLLER

Germany

We specialise in everything to do with assembly, disassembly and reassembly, including the transfer/relocation and commissioning of complex machinery and installations. Our partners benefit from our many years of experience on an international level. The precise mechanical and electrical assembly of machines and installations is a vital component of our success. Our specially trained employees are well acquainted with the complexity and processes of these machines. Thanks to a well-operating team that works in an interconnected fashion, we are able to meet deadlines for even the most challenging of requirements. You can also benefit from our experience in project management, as we offer everything from a single source. We provide complete scheduling for all aspects including timetable, transportation/transfer and reintegration into the production process. We guarantee effectiveness, flexibility and complete customer satisfaction. Our customers' wishes always take priority – no matter whether these concern modifications with regard to design, control and programming or the storage, cleaning, maintenance and general overhaul of an installation.

Website
PÜSCHEL AUTOMATION GMBH & CO. KG

Germany

PÜSCHEL has been synonymous with the highest standard in assembly automation for over 45 years. We plan, develop, produce, assemble, programme and install. PÜSCHEL automation systems – in close cooperation with customers from the very beginning. We consider intensive consultation during start-up and service beyond the beginning of production to be indispensable components of our customer-orientated trade. PÜSCHEL makes use of its experience in automation – across all industries and with a focus on the future. We can provide you with the following, depending on your request: Automatic feeding devices, automation technology, assembly systems, robot-controlled assembly systems, assembly automation, assembly machines, automatic revolving transfer machinery, special machines for the automotive and supply industries, special machine construction, feeding devices for automation

Website
OHRMANN GMBH

Germany

OHRMANN MONTAGETECHNIK combines seal assembly and automation. OHRMANN MONTAGETECHNIK specialises in equipment, stations and machines, as well as fully automated solutions, for feeding and installing seals. Since the company was founded in 1986, OHRMANN MONTAGETECHNIK has been helping customers to feed and install seals with speed, reliability, consistency and automation. The solutions are employed not only for O-rings, but also for lip seals and other seal geometries, including even complex moulded seals. Our portfolio of solutions incorporates: • Standardised assembly equipment, semi-automated and fully automated systems for internal assembly, external assembly or front-end assembly of seals • Integration modules and stations: A modular system for feeding and installing seals for integration in fully automated systems • Complete automation solutions, available as rotary table systems, line transfer systems or robot cells

Website
METZNER MASCHINENBAU GMBH

Germany

Metzner is an internationally active, medium-sized company and one of the leading manufacturers of cutting and finishing machines for rubber and plastic processing, as well as for processing cables, stranded wires and corrugated pipes. We have thus been an expert partner for a huge variety of sectors for many years. No matter whether it's the automotive/commercial vehicle industry, medical technology, cabinet construction or telecommunications. Since 2018, we have also been impressing customers with unique automation solutions for processing high-voltage cables and automated installation of HV connector systems through our subsidiary Metzner E-Mobility. We develop both series machinery and customer-specific systems in all product areas. We plan, develop and manufacture individual solutions according to customer wishes for all applications that go beyond the functions of standard machines. Thanks to our extensive experience as a mechanical engineer, we thus create sophisticated and application-appropriate solutions that are used under challenging conditions. Metzner takes on the entire development process here, from analysis and consultation, through conception and right up to successful delivery. We present you with a few customer-specific solutions and production lines on the following pages. Discover interesting starting points for your tasks!

See all products
EC AUTOMATIC GROUP-GERMANY GMBH

Germany

EC Automatic Group - Germany GmbH is a part of the international group of companies “Automatic Group”. For more than ten years we have been designing, developing, installing electrical equipment and industrial automation systems, capital construction, modernization of the industrial and commercial facilities and structures for various purposes. We specialize in: development, design, installation and construction, maintenance of power supply systems; automation of the production processes; development and replacement of lighting systems; construction of production shops and buildings; complex relocation (dismantling, installation, commissioning) of the production lines; supply of the equipment, etc.The group of engineering companies Automatic Group has offices in 3 countries: 1) EC Automatic Group LLC (Ukraine, Sumy); 2) EC Automatic Group-Germany GmbH (Germany, Dortmund); 3) EC Automatic Group-CIS LLC (Russia, Belgorod). 4) EC Automatic Group-USA LLC In order to improve the quality of services, the group of companies is certified in accordance with the requirements of OHSAS 18001: 2007 "Occupational health and safety management system. Requirements ”, as well as the international standard of quality management system ISO 9001: 2015. In 2018, the company passed a social audit under the scheme SMETA (SEDEX members ethical trade audit) Version 6.0.

See all products

A page for your business

Can you see this? Your potential clients will too. Join us now so you too can be visible on europages

Add my business

HBS BOLZENSCHWEISS-SYSTEME GMBH & CO. KG

Germany

HBS – sleeve and nut welding! Employing the innovative MARC welding method, which uses magnetic rotating arcs, HBS offers sleeves and nut welding systems which are increasingly replacing traditional methods all around the world. HBS – stud welding with tip ignition! With tip ignition stud welding devices by HBS, you can save a huge amount of time and costs while working and produce the perfect result without the need for post-machining. Our formula for success is extremely short welding times! (1–3 msec). No filler material is required. HBS offers a broad range: From semi-automated systems to fully-automated CNC installations. Semi- and fully-automated stud welding systems, stud welding units, stud welding heads, stud welding guns, stud feeding, automated accessories, pneumatic clamps. Our products: Fastening technology, stud welding, stud welding units, CNC stud welding units, threaded sleeves, inverter welders, welding units for threaded sleeves, welding studs and much more.
MICROCONTROL GMBH & CO. KG - SYSTEMHAUS FÜR AUTOMATISIERUNG

Germany

For over 25 years, MicroControl has been a leader in CAN bus applications for industries such as mechanical engineering, automotive engineering and medical technology. We provide high-quality solutions for converting analogue data into digital data, support Industry 4.0 and provide custom-made hardware and software solutions. From "1.I/O modules" to training courses, we are your partner for innovative automation technology. Visit our website for more information. Our "µCAN modules" form the link for networking analogue and digital I/O signals via the CAN bus. They offer a wider temperature range, better resolution, a wider supply voltage and high degrees of protection. With our FDready system, we facilitate quicker data transmission rates without additional investments. 2. Controls Our µMIC.200 family offers forward-looking control technology for IoT gateways, small control systems and top-hat rail PCs. Easy to program with Node-RED or in C/C++, they provide a wide range of digital communication interfaces and are Industry 4.0-ready. 3. CANopen/CANopen FD and J1939 protocol stacks Our protocol stacks accelerate software development while providing security, increased speed and efficiency. Thanks to our modular system, they can be perfectly adapted to requirements. 4. Hardware and software advice and development 5. Training in BUS technology Our exclusive training offers include practical workshops.

Website See all products
LÖDIGE INDUSTRIES GMBH

Germany

The Lödige Industries Group was founded in 1948 and has independent registered offices in Hong Kong, London, New York and Doha (Qatar), and each office also has numerous subsidiaries. Currently, the family-owned business has over1 000 employees throughout the world. Lödige offers conveyor-technology solutions for a wide range of sectors and specialises in complex material flow systems for logistics tasks. The company is the global leader for cargo handling terminals. The product range includes solutions for barrier-free construction (stair lifts, platform lifts), freight lifts, car elevators, lifting platforms, rack feeders, fully automated car parking systems, air cargo installations and software solutions for warehouse management. Lödige Service includes maintenance, modernisation, repairs and replacement parts for elevators, lifting platforms and industrial systems from Lödige and other manufacturers.

Website See all products
QUELLTECH GMBH

Germany

QuellTech turnkey solutions for industrial image processing In addition to the laser sensor technology, our complete solutions include application software that can be implemented remotely worldwide. Why QuellTech laser sensors? Due to our flexible production methods and our focus on laser triangulation, we can adapt our sensors at any time. This includes, for example: Limited installation space, high process speeds, high temperatures of the measurement objects (up to approx. 1200°C), optically demanding surfaces and harsh industrial environments. Inline quality monitoring in production, machines and systems with laser sensor technology for surface inspection, volume measurement, preventive maintenance, flatness measurements, thickness measurements, weld seam guidance, weld seam inspection, industrial image processing and 3D laser scanner measurements. Quelltech offers inline solutions for quality inspection in the following industries Metal Fabrication, Smartphone Manufacturing, Welding Automation, OEM Integration, Power Engineering, Mining, Automotive. Do you need an initial consultation for your measurement task and preferably an initial free estimate of the feasibility of your measurement task? Then please get in touch with us at office@quelltech.de We will call you back promptly or arrange a team meeting with you for a competent initial technical evaluation of your measurement task.

Website See all products
RULAND ENGINEERING & CONSULTING GMBH

Germany

Process plants for treating liquids of all kinds: That is what Ruland does best. From consulting and engineering to plant construction, assembly and installation at the customer – we provide all services from one source. Modern automation concepts, always adapted to individual customer requirements, and comprehensive services such as spare parts management and maintenance complete the offer. Ruland plans and builds tank storage facilities, dosing and mixing systems, heating systems, HTST and UHT systems, filtration systems, fermentation systems, degassing systems, pigging systems, cleaning systems for pipework, aseptic systems and CIP systems as well as systems for special requirements. We implement plant expansion and optimisation projects with single modules or turnkey projects with complex process plants. Our 320 employees are based in Neustadt an der Weinstraße, in branches across Germany and in our subsidiaries in Russia and Poland.

Website

SME SONDERMASCHINENBAU ENGELSDORF GMBH

Germany

SME Sondermaschinenbau Engelsdorf GmbH supports you in developing individual and holistic system solutions. We cover the entire process chain: From planning and construction to implementation. Our trademark is coherent machine and plant designs for the automotive, building materials and process industries as well as the consumer goods industry. Performance fields that help automate your processes: Conveying and handling solutions, assembly technology, robot cells for palletising, handling and screwdriving processes. Manufacturing possibilities that make us strong: Sawing, conventional and CNC turning, milling, horizontal drilling, TIG and MAG welding, painting, assembly and electrical installation. Software solutions that support us in the implementation: AutoCAD Inventor® 2018, AutoCAD Inventor® Factory Design, EPLAN Electric P8, Siemens TIA V15, DELECO® ERP system.

Website
STL STEUERUNGS-TECHNIK-LEUTHE GMBH

Germany

Your international automation specialist. PLC PROGRAMMING – Simatic TIA Portal – Simatic Step 7 – 840D – Beckhoff – Allen Bradley. ROBOT PROGRAMMING – Kuka – ABB – Fanuc – Yaskawa – Comau – UR/Universal Robot. DIAGRAM CREATION – EPLAN P8 – WSCAD – parts list creation – component lists – customer-specific. SWITCH CABINET CONSTRUCTION – customer-specific – in line with applicable standards – CE marking – electrical testing. PROJECT MANAGEMENT – multilingual – customer trainings – documentation. COMMISSIONING – worldwide – programmers – special machine construction – flexible. Robot programming | Diagram creation | Switch cabinet construction | Switch cabinets | Switch cabinet assemblies | Switch cabinet planning | PLC programming | Control system construction | Automation technology | Automation technology for machine tools | Automation of industrial machines and industrial constructions | Automation of special machines | Industrial control systems | Installation of switchgears | Switch cabinet electronics | Software for automation systems | Software for automation technology | Mechanical engineering | PLC (programmable logic controller) components | Control systems, electronic, for mechanical and plant engineering | Control systems for production facilities and production machines | Control technology | Cell construction | UR | Universal Robot | MRK | Cobot | Lightweight robot. Office in Bobingen | Near Munich | Neu-Ulm | Günzburg | Heidenheim Brenz | Aalen | Mindelheim | Landsberg Lech | Nördlingen | Donauwörth | Dilliningen | Krumbach

Website

SCHMALE MASCHINENBAU GMBH

Germany

We are one of the leading manufacturers of wire bending machines and tube bending machines.. In our modularly designed systems, we install a wide variety of forming technology units to create customer-specific automation solutions. At the start of a new project, we analyse our customer's individual manufacturing problem and use it to put together a tailored package of technologies. These form the starting point for planning our production facilities for wire, tube and strip. Each of the production technologies can be combined with others according to the modular principle and is not tied to an existing machine concept. This is clearly what sets us apart from the competition. Our development team is constantly looking for optimisation potential e.g. in raw material or energy savings and takes into account possible later expansion stages of the systems at an early stage. This enables us to provide our customers with highly productive and future-proof solutions for production.

Website See all products
PROTACT GMBH

Germany

Design and manufacture of automation systems for industrial valves. We design and manufacture individual automation systems for industrial valves in the process industry, working with our customers mainly comprising original equipment and plant manufacturers. The product range includes pneumatic and electric actuators, auxiliary devices such as position controllers, limit position detectors and solenoid valves for installation on open/closed or control valves. For us as a company independent of the Group, expertise, short communication channels and customer focus and service are at the core of any good partnership, and guarantee optimal support for customers and users. Thanks to our highly motivated team, we strive to maintain consistently high quality in our work processes as well as our products and services, in order to meet the highest expectations of our demanding global customer base in terms of quality, cost-effectiveness and delivery readiness. Our portfolio: • Design of automation solutions for special applications • Automation service for valves • Selection and distribution of industrial valves • Design and production of complete valve systems • Electric or pneumatic swivel drives • Auxiliary components for swivel drives • Control valves and control production • Compressed air processing • Drive systems for open/closed or control valves

Website
EPA GMBH

Germany

As a specialist in the field of electronic drive technology, we see ourselves not only as a component supplier, but also as a systems provider. Starting with engineering, through consultation and support, right up to commissioning, we provide all services, including installations on turnkey contract. Our core services are: Planning your applications, designing electrical drive components, (frequency inverter, engine, gearbox, transmitter, filter, brake resistors, etc.), commissioning and parametrisation of frequency inverters, PLC programming and automation, control cabinet construction (in cooperation with our affiliated company EPS), installation of electrical components, developing and manufacturing customer-specific EMC and line filters, EMC measurements and EMC consultation, leakage current optimisation (FI protection switch for false tripping), line analyses (harmonics, line fluctuations, etc.), suppression of radio interference in plants and equipment

Website
PRÜFREX INNOVATIVE POWER PRODUCTS GMBH

Germany

PRUFREX has mastered the development, production and assembly process all the way to the completion of installation-ready electronics components. As a manufacturer of electronic control units and digital ignition systems, we have the whole EMS context covered at the highest level. Coil winding technology, circuit board assembly, component assembly, testing and potting – PRUFREX performs the whole production process under one roof. 100% functionality tests, for example ICT/FCT, accompany the production process and ensure minimal return rates. Manufacturing is located in Germany and the USA. Whether conventional manufacturing, or semi-automated or fully automated production: With us, you can count on the highest quality as well as economic efficiency. One of our special strengths here is the PX ROBUST DESIGN. We can bring competitive product improvements into production quickly, economically and tailor-made for your application. The best engineering department in the competitive environment with more than 1, 000 successful development projects form the foundations on which PRUFREX develops its forward-looking market solutions. We are a development partner coming from the standardised, highly integrated Small Engine sector. Our highly adaptable modular engineering is closely integrated with in-house production.

Website See all products
B+B AUTOMATIONS- UND STEUERUNGSTECHNIK GMBH

Germany

We, b+b Automations- und Steuerungstechnik GmbH, develop complete solutions in the fields of labelling, automation, serialisation and aggregation. Legal requirements as well as your wishes and needs are the focus here. In addition to our industry-specific standard systems, we offer complete solutions and project the necessary hardware and software modules for your application. For this purpose we integrate components from well-known partners in the fields of printing, sensoring and vision technology. Our serialisation and aggregation systems are characterized by quality, modularity, user-friendliness and durability. We offer you comprehensive project management from the start of the project to the installation and commissioning of the plant - your advantage is that you have a dedicated contact person throughout all project phases. Our optimally trained service staff offers you a comprehensive after-sales service. We will be pleased to create an individual SLA for you that meets your requirements and needs. Further information is available at www.bb-automation.com

Website See all products
ANDRITZ KAISER GMBH

Germany

Engineering and manufacturing company for automatic blanking and forming presses, including peripheral devices, as well as service company for automatic blanking and forming presses. Our name is synonymous with the highest quality in forming technology. In addition to standard machinery, we supply tailored solutions for every application – from simple presses to complete production lines with belt systems and automation systems. The modular design guarantees universal usage with broad standardisation of the primary components. In addition, our engineering team optimises each installation according to on-site conditions. Our products: Complete production lines for punched and formed sheet metal parts, circular and circuit board blank cutting systems, KAISER conventional automatic punching and metal forming presses from 630 to 25, 000 kN, KAISER servo presses from 1000 to 25, 000 kN, high-speed presses from 630 to 4000 kN, 2D and 3D transfer systems with linear drives, KWV roll feed devices, fully automatic tool changing systems.

See all products
KASPAR SCHULZ BRAUEREIMASCHINENFABRIK & APPARATEBAUANSTALT GMBH

Germany

KASPAR SCHULZ – Brewing technology since 1677. KASPAR SCHULZ, the world's oldest brewery plant manufacturer, is now present in over 67 countries and is synonymous with innovative solutions and excellent product quality. It also supplies ready-to-use brewing systems (fully automated on request), fermentation and storage tanks, malting systems and distillation systems all over the world. The family business, now run in its tenth generation, upholds its philosophy of having in-house manufacturing and has committed itself to its site in Bamberg, a town in southwestern Germany, where all of the production steps are carried out – from the raw sheet metal to the finished vessel. Moreover, installation, repair and maintenance work is exclusively performed by our in-house employees. Whether for brewing, malting or distilling – with its "best of SCHULZ" promise, the innovative system supplier ensures the best results in the entire value chain, from the barley to the glass – and all from one source.

See all products
KARDEX DEUTSCHLAND GMBH

Germany

Kardex Remstar is one of the world's leading manufacturers of automated storage and retrieval systems. Every one of our products was developed with the aim of increasing your productivity and improving the efficiency of your workflows. Our tailored solutions enable you to optimise the use of your storage space. Since 1873, we have successfully installed over 140, 000 systems for the "office", "warehouse" and "trade" areas – proof that our employees are highly capable and dedicated. Global representation: Kardex Remstar is represented on-site by subsidiaries and agencies in a large number of countries around the world. As part of the Kardex Group, with over 1480 employees, we are able to use our knowledge in the areas of service, support and training.

See all products

EKATO SYSTEMS GMBH

Germany

From the mixing and homogenisation of liquids and highly viscous materials (UNIMIX) to the mixing and drying of solids (SOLIDMIX), the vacuum processing systems from EKATO SYSTEMS cover a wide range of applications. Teams of experienced professionals apply their expertise to provide innovative solutions for the most challenging tasks in process technology. As one of the leading manufacturers worldwide for vacuum processing systems on the laboratory, pilot and production scale, EKATO SYSTEMS provides complete solutions for the entire life cycle of systems – from engineering and pilot trials to commissioning, servicing and maintenance. Be it an individual system or turn-key installations in a GMP-compliant design that include complete automation – the EKATO systems are being constantly improved and developed further. The EKATO SYSTEMS technical centre in Schopfheim provides the ideal conditions for scale-up trials as well as process developments and optimisation of ongoing manufacturing processes.
LIEDTKE ANTRIEBSTECHNIK GMBH & CO. KG

Germany

Since 1973, LIEDTKE Antriebstechnik has automated a wide range of production plants. The main focus of our work is the implementation of the tasks required by the production process and set by mechanical engineering. This particularly applies to running material lines in the paper, foil, metal and textile industry with electrical controls. For this purpose, we create fully automated, visualised and networked solutions. Our area of expertise ranges from simple solutions in winding technology with three-phase winders to complex multi-axis systems for DC and three-phase technology. Our service to ensure that you are ready for production includes planning and project management, electrical installation, commissioning and after-sales service. Our product range includes magnetic particle clutches, torque limiters, overload clutches, web tension measuring systems, force transducers, three-phase winders, AC voltage regulators, switchgear systems, automation technology, winding technology, plant modernisation, electronics manufacturing, tension measuring bearings, tension measuring stations, measuring bearing pins, force transducers, torque transducers, measuring amplifiers, instrument transformers, torque measuring equipment, torque release controllers, three-phase current controllers, edge trim winding devices and constant current regulators. We also use cutting-edge computer technologies to plan our systems. Our trained specialist staff provide a comprehensive service – from commissioning to servicing – all over the world .
STRAMA MPS MASCHINENBAU GMBH & CO. KG

Germany

Strama MPS develops special machines, systems and complete solutions for manufacturing, assembly and inspection of complex technical components and products. We are available as a service provider for assembly installation (also possible in cleanroom conditions) or extended workbench. International technology companies value our engineering expertise, experience and certainty that with us, their project will succeed. Our goal is to build long-term and trusting partnerships with our customers and employees. Fair, open and focuses on a shared future, the best results can be achieved. It means a lot to us that 90% of our customers are core customers and that we are valued as an employer and partner. This is what we work towards every day. Our portfolio includes bodywork structural work, test benches, rotary transfer machinery, e-mobility, automation technology, medical technology, railway technology and battery solutions.
SCHÜSSLER MASCHINEN- UND ANLAGENBAU GMBH

Germany

Vollmer-Federn Schüssler Maschinen- und Anlagenbau GmbH is a newly founded company which integrates the fields of activity of Schüssler Hebe- u. Fördertechnik GmbH (conveyors, belt conveyors and lifting systems) as well as the machinery and system manufacture division and the department of "Wüllner forest machinery". The "machinery & systems/automotive" department is specially focused on the automotive sector and its supplier industry. Thanks to many years of experience in this field, we offer both planning and manufacturing of various installations or automated individual machines. Conveyors and handling systems also play a role. Customised solutions for conveyor systems, tool changing trolleys and tilting devices. Our product range comprises sophisticated lifting technology and conveyor technology. From the field of drum handling to heavy tool changing systems, tool shelf design and roller conveyors, we develop concepts and implement them successfully.
BAUMANN GMBH

Germany

Baumann GmbH is a medium-sized family business. Founded in 1954, it stands for more than 65 years of innovative precision product manufacture. One part of our product range: Manufacturing and worldwide distribution of high-quality punched and bent parts – among others as an automotive supplier. Prototype construction, tool manufacturing (punching tool, progressive tools, bending tools, drawing tools), machine construction. High-performance forming, laser and CNC edging technology, as well as automated welding processes; all common metallic materials can be machined. Further processing of parts, e.g. through surface finishing in our own automatic powder coating facility or through subcontractors. Installation and packaging of assemblies or ready-to-use components. Distribution of the self-developed Baumann assembly system for mounting solar modules. Versatile and experienced partner for complete solutions, highly valued by customer for our expertise, flexibility and reliability.
STOPA ANLAGENBAU GMBH

Germany

STOPA is a leading premium manufacturer of automated storage systems for sheet material, long-span goods and automatic parking systems across Europe. The product line ranges from stand-alone applications to integrated automated modules. With 40 years of practical experience, including complex constructions, and more than 1900 systems installed worldwide, this independent company has unique experience when it comes to product quality and process security, process automation and software development. Our products.: Automation of storage and lifting systems; metal machine housings; storage and factory facilities; storage facilities for sheet metal; storage systems; storage facilities for long goods; welded structures; plant construction using stainless steels; industrial building construction; chain transporters
BOS TECHNOLOGY GMBH

Germany

Highly skilled employees with many years of experience translate customer technologies into innovative system concepts. The specialised machines from BOS represent customer-specific installations for automating production processes that can see and feel, with integrated 100% quality control. Company management and the 30 employees have many years of experience in the development, construction and manufacture of specialised machines. BOS has established itself worldwide as a competent and powerful partner for automating production processes. One of our greatest strengths is flexible and customised further development and composition of standardised modules to create powerful specialised machines.
LAW NDT MESS- UND PRÜFSYSTEME GMBH

Germany

LAW NDT Mess- und Prüfsysteme GmbH is your first point of contact for full quality assurance. Be it crack testing, joint testing, conductivity testing, eddy current testing, optical or mechanical testing procedures, as well as joining and installation technology, we provide innovative and flexible testing systems and production systems with automated testing processes for full inspection. LAW NDT's testing systems are suitable for a range of applications and components and are represented in a variety of sectors, such as the automotive industry, medical technology, the aeronautical industry, the energy sector, and much more. Since 2020, we have provided a world first: With our MEXS 400 modular testing system, we have redefined flexibility, enabling huge time savings for conversions and maintenance thanks to Plug&Work, as well as other innovative features for economical and cost-effective working. Providing an optimal solution in line with your quality standard – that's what we strive for!
SYGASTEC GMBH

Germany

SyGasTec povides Carbon Molecular Sieves (CMS), Zeolite Molecular Sieves, Activated Alumina, Silica Gel and other adsorbents for PSA nitrogen generators, air/gas-drying, gas purifiers and also for air/gas-separations also for nature gas purification. SyGasTec is also a company who designs, manufactures and installs on-site high-purity hydrogen and nitrogen production systems, Gas purification systems (for almost all kind of gases), Glove boxes. We provide solutions of air/Gas drying systems and gas separation systems as well. Advanced industrial automation procedures, strong research efforts to offer continuous technology improvements and the professional and solid engineering guarantee perfect correspondence between offer and application.

See all products
IDEC ELEKTROTECHNIK GMBH

Germany

Sale of products and systems for controlling and automation technology with the following key areas: Control and automation systems with programmable logic controllers ranging from 10 I/O to 512 I/O as the main products. The SmartAXIS compact controller with Ethernet is available for DIN rails with 12, 24, 40 or 48 I/O and as a 3.8" touch display with integrated 12 I/O controller. The modular MicroSmart PLC with 10 to 512 I/O and touch displays of 4.8" to 12.1" is also available as an add-on. Electrical control components with the command and signalling devices product group for all common installation diameters, emergency stop button in various designs, three-stage enable switch, signal pillars, all types of relays and switched-mode power supply units. Optical sensors specialising in colour recognition, water sensors, laser distance sensors and other special sensors as well as photoelectric sensors.