Results for

Manufacturer Producer - Components for electric motors

1,365 Companies

84 Products

METALLWARENFABRIK GEMMINGEN GMBH

Germany

Metallwarenfabrik Gemmingen GmbH produces components for electrical mechanical engineering, alternators and generator systems in two factories. Metallwarenfabrik Gemmingen GmbH was founded in 1961. We began producing stamped and die-cast parts for the electrical industry the very same year. Soon after, we began manufacturing the entire IEC standard motor series and developing complete solutions for the construction of electric motors. Everything comes from a single source. State-of-the-art production, storage and communications technologies mean that all parts are available in next to no time. We focus on power generation in everything we do. This is an area in which we have specialised for many years, so we have a great deal of experience to offer customers. Thanks to this experience, the advice of GEKO specialists regarding generator construction is sought after internationally. For complex custom productions but also for complicated military applications.

Website
MMOTORS JSC

Bulgaria

MMOTORS is a Bulgarian company was founded in 1961 under the name “Micromotors”, engaged with manufacturing activities in five divisions: •Induction electric motors; •Axial fans; •Heat recovery ventilation systems; •Aluminum foundry; •Plastic forming. The induction electric motors MA, MAL, MAT, MR and MRS series are designed for general purposes. They are self-ventilated, the frame size 56mm, 63mm, 71mm, 80mm, 90mm, 100mm, 112mm and 132mm. The series are designated as follows: - MA series – three-phase induction motors. - MAL series – lifting three-phase induction hoisting motors. - MAT series – trolley three-phase induction motors with break. - MR series – single-phase induction motors with running capacitor. - MRS series – single-phase induction motors with running and starting capacitors. BASIC CHARACTERISTICS: Power supply: -three-phase: 400/230 V – 50Hz. -single-phase: 220-240V / 50Hz. Design for other voltage and frequencies is possible : -Protection Degree: IP 54 / IP 55 -Insulation Class: “F” -Standard forms: B3, B5, B14, B3/B5 and B3/B14. OPERATING CONDITIONS: The motors are designed to operate in Temperate Climate (Class “N”) at temperatures from -25oC to + 40oC, maximum altitude (above sea level) 1000m, and maximum relative humidity 85%. Standards: IEC: 60034-5: 2007; 60034-1: 2010; 1143: 1985; 10881-85. The axial fans are divided into a few sections: •Elegant & Stylish •Standard •Industrial •High temperature •Heat recovery ventilation systems

All the products for "components for electric motors"

Three-phase induction motors ma series

Single-phase induction motors mr ss and mrs series

Induction motors for hoists

Special types of induction motors

Website See all products
KURT MAIER MOTOR-PRESS GMBH

Germany

Kurt Maier Motor-Press GmbH was established in 1979. We are a medium-sized, expanding business with production sites in Germany and Southern Europe. We provide our customers with components for electrical engineering in manufactured sizes from IEC 56 to IEC 400, as well as customer-specific special components. This includes stator housings, bearing shields, flanges, as well as aluminium and grey cast iron terminal boxes. We deliver within Germany, the rest of Europe and overseas.

All the products for "components for electric motors"

Components for electric motors

Components for electric motors

Components for electric motors

Components for electric motors

Components for electric motors

See all products
OZSA INDUSTRY

Turkey

The company OZSA INDUSTRY, is a Manufacturer/ Producer, which operates in the Electric motors - aC industry. It also operates in the components for electrical motors industries. It is based in Istanbul, Turkey.
INVERTO

Belgium

The company INVERTO, is a Manufacturer/ Producer, which operates in the Electric and electronic components - machines for manufacturing industry. It also operates in the Electricity - distribution equipment, Electric motors and parts, Electricity - distribution equipment, Electric motors and parts, components for electrical motors, and small electrical parts industries. It is based in Evergem, Belgium.

A page for your business

Can you see this? Your potential clients will too. Join us now so you too can be visible on europages

Add my business

SAF S.P.A.

Italy

The company SAF S.P.A., is a Manufacturer/ Producer, which operates in the Steels and metals - forming and cutting industry. It also operates in the Forming - steels and metals, Forming - steels and metals, electrical sheet shearing, and components for electrical motors industries. It is based in Muscoline, Italy.
SOLO MOTOR CONTROLLERS SRL

Italy

The company SOLO MOTOR CONTROLLERS SRL, is a Manufacturer/ Producer, which operates in the Engine testing and regulating equipment - electronic industry. It also operates in the sinusoid inverters, components for electric motors, and plants and equipment for processing hams industries. It is based in Fagnano Olona, Italy.
NOVA MOTOR REDÜKTÖR SAN.TIC.LTD.ŞTI

Turkey

The company NOVA MOTOR REDÜKTÖR SAN.TIC.LTD.ŞTI, is a Manufacturer/ Producer, which operates in the Electrical systems and equipment industry. It also operates in the reduction units, and components for electric motors industries. It is based in istanbul, Turkey.
EKOL FIRINMAKINALARI

Turkey

Industrial Bakery Equipment Bakery Equipment Bakery Machines is a manufacturer and supplier company exporting its reliable products not only in Turkey, but also abroad. We export our products mainly to Asia, Eastern Europe, Africa and Middle East. Our aim is to expend our market to other countries such as Central and South America. We mainly produce Bakery ovens and bakery equipments such as Dough Cutting and shaping machines, Dough kneading machines, Packing and slicing Machines etc.. Our company gives full satisfaction to our customers through its reliable machinery for 28 years. All the main electrical components including motors, controllers are used of international standard companies If you would like to contact us, do not hesitate to send us e-mail or call us. Phone: +903323425358 Fax : +903323427473 Mobile : + 90 530 760 05 52 (or whatsap) Skype : maschine.markt www.ekolfirinmakina.com.tr Mr. Kadir İNCELİ
SHENZHEN PROMOSTAR HARDWARE CO.,LTD

Germany

ShenZhen PromoStar Hardware Co., Ltd is a company who specialize in Metal CNC machining parts, CNC turning parts, CNC milling parts, stamping parts, sheet metal parts, welding products for all kinds of industry. The materials we used to worked were stainless steel, aluminium, titanium, brass, copper, carbon steel, POM, PEEK and so on. The headquater of Promostar located at ShenZhen, China with a 2000² meter workplant.Since 2016, Promostar has an office in Meerbusch, Germany. Since 2021 lunched a 3000² meter workplant in Jiangxi China. We can meet all industry demands, such as : Austronautic, Optik, Sensor, Electronic, Automotive, LED lighting, furniture, machinery & equipments, medicial equipments, plastic & moulds lines and so on. We can reach the tolerance within +/-0.002mm. The material we are using can be reached the standard cetifications from ROHS, REACH. Promostar invested a lot on the machines and worker technologies and we have a strong human resources department. All our team have more than 8 years relationship. We work on team. PromoStar is getting a good credit around the world. Please do not hesitate to contact us for more information !

All the products for "components for electric motors"

Stainless steel ring

Machining rhombic knurled.

E-cigarette shell aluminum processing.

Plastic cavity.

Brass & stainless steel parts.

Website See all products

XIAMEN NINESUN IMP. & EXP. CO., LTD

China

NINESUN is a company based in Xiamen, China. Since 1992, we are specialized in the manufacturing and processing of non-ferrous metal materials. Besides China, we export our countries all over the world including in the United States, in Germany, in Great Britain or in Japan. We mostly manufacture copper and aluminium products as well as tungsten alloys. These products can be used for various applications, and therefore in several sectors such as electronic information, power facilities, automobiles, ships, aerospace or national defense industry. Our advanced equipment allows us to operate on more than 200 kinds of products. Over the years we have formed trusting and solid partnerships with metal material manufacturers internationally. Our customers trust our experience to provide them with precise production and processing, fast logistics and a quality after-sales service. We can also offer suggestions for the material suggestions beforehand. We deliver high quality products at the best price in the shortest deadlines possible. Thanks to the quality of our management system, we are proud to be certified according to the ISO 9001 standards. Don't hesitate to contact us for more information!

All the products for "components for electric motors"

SmCo magnets OEM Factory price

FR4 Hdi double sided electronic circuit board pcbs

Website See all products
SCHWEIZER GMBH & CO. KG

Germany

Custom cooler production and special parts for extreme demands. Motor sports, tuning and industrial applications demand maximum performance in the narrowest of spaces. For greater performance, you need components that fulfil high requirements and can nevertheless be installed and removed without problems. Schweizer GmbH & Co. KG is your expert for special production of custom coolers in the fields of motor sports and industry. Furthermore, we offer you turned and milled parts that are manufactured with the latest CNC machinery. Discover a multitude of attractive tuning components in our online range! Do you have thermal problems? Perhaps your heat protection is insufficient? Are the appropriate screw connections missing? Or do you need components that don't exist ready-made? Here at s-r-p.com, you can find a great selection of accessory parts of top quality. As great stress is often placed on these and custom solutions required, we rely on brand quality in several sizes

All the products for "components for electric motors"

Electrical Accessories

Website See all products

Product recommendations

Czech Rep.

France

See more products

ING. ERICH GEISS GMBH & CO KG

Germany

The company was founded as a trading company for armature winding products for the repair of electric motors in today's head office in 1945. Production of motor terminal boards, cell connectors, clamps, cable lugs, slip ring elements, carbon brushes, brush studs, terminal insulators, retainer insulators, stud terminals. Since that time, we have designed and built over 250 dies. With these dies, we produce approx. 40, 000 motor terminal boards for our international customers every workday. Since we began producing slip ring elements, we have been able to offer our customers more than 700 different element types and also produce slip rings based on old drawings from leading manufacturers.

Website
PEEKCHINA CO., LTD.

China

PEEKChina as a 15 years Chinese thermoplastic Polyetheretherketone manufacturer who is only focusing on PEEK material. Production of engineering plastic PEEK semi-finished and finished products. Materials can be Pure PEEK 1000, PEEK CF30, PEEK GF30 and PEEK MOD. For the semi-finished products, we cooperated with Jilin University and launched 15 lines of profile continuous extrusion production, which include PEEK Pipe, PEEK Sheet, PEEK Rod, PEEK Film, and PEEK Parts are both in machining process and injection molding. As well, we are researching with Xi’an Jiaotong University on PEEK 3D filaments and printers. From 2015, we became involved with long term implantable medical PEEK. Our medical PEEK has been certified by a lot of laboratories and colleges, it complies with ASTM F2026 and FDA/SGS certified, more and more medical device manufacturers and implantable material consumers choose us. As a Chinese top new material PEEK innovator, we spend 20% of our income on technical research. Our main customers are from USA, Europe, North America and Korea. ONLY IN PEEK, YOUR BEST CHOICE. ONLY IN PEEK, THE MOST PROFESSIONAL. CHINESE TOP SUPPLIER FOR PEEK PROFILES & PARTS.

All the products for "components for electric motors"

PEEK Flat Wire PEEK Hairpin Wire

Polyetheretherketone (PEEK) Film for Electronics

PEEK Electronic Circuit Board

Carbon PEEK Precision Lock Nut

Website See all products
PRÜFREX INNOVATIVE POWER PRODUCTS GMBH

Germany

PRUFREX has mastered the development, production and assembly process all the way to the completion of installation-ready electronics components. As a manufacturer of electronic control units and digital ignition systems, we have the whole EMS context covered at the highest level. Coil winding technology, circuit board assembly, component assembly, testing and potting – PRUFREX performs the whole production process under one roof. 100% functionality tests, for example ICT/FCT, accompany the production process and ensure minimal return rates. Manufacturing is located in Germany and the USA. Whether conventional manufacturing, or semi-automated or fully automated production: With us, you can count on the highest quality as well as economic efficiency. One of our special strengths here is the PX ROBUST DESIGN. We can bring competitive product improvements into production quickly, economically and tailor-made for your application. The best engineering department in the competitive environment with more than 1, 000 successful development projects form the foundations on which PRUFREX develops its forward-looking market solutions. We are a development partner coming from the standardised, highly integrated Small Engine sector. Our highly adaptable modular engineering is closely integrated with in-house production.

All the products for "components for electric motors"

Air-core coils

Inline AOI

Test equipment construction

Dispensing technology

Potting components

Website See all products
EUBA ANTRIEBSTECHNIK ELLER GMBH

Germany

EUBA – this name is associated with more than 50 years of experience in the development of electrical adjustable drives. Custom-built solutions are our strength. We offer adjustable drives with forces from 50 daN up to 200, 000 daN. A qualified team of engineers and technicians in the internal and external sales team can also advise you on-site regarding the proper selection of your drive. Continuous quality control and innovative development set new standards. For your safety, each drive only leaves our factory after extensive testing. The adjustment force can be up to 200, 000 daN, with an adjustment distance of up to 7000 mm and variable adjustment speed. Our drives are manufactured with hard-chrome plated push rods as standard (special requests can be accommodated). Industry-standard motor-drive units can be used, and can be connected to the adjustable drives via a DIN IEC flange. Rotary drives can also be flanged.

Website
SOLID SEMECS B.V.

Netherlands

Semecs, member of SERO Group, is specialized in the assembly of printed circuits boards on an industrial scale, from 5.000 to 500.000 pieces. Our products are mainly destined to the automotive, medical and industry markets. Based in the Netherlands, our company's production plant is located in Slovakia with subsidiaries in Germany and Denmark, enabling to serve our customers all around Europe. We are proud to be ISO 9001, ISO 14001 and ISO 45001 certified. Moreover, we are fully certified for PCB assembly in the Automotive market (IATF 16949) and the Medical market (ISO 13485) as well. We have also recently been rewarded with the ISO 27001 certificate. We strive to keep up with the highest quality standards, and carry out all necessary testing. We deliver a wide range of services, including product design and prototyping, manufacturing and distribution. We also deliver a comprehensive after-sales service to ensure our customers' satisfaction, which helps us to constantly improve. Our state-of-the-art production lines are organized to allow maximum flexibility. Because Semecs is member of the SERO Group, we can react quickly and ensure that your order is always arranged down to the last detail. Can you settle for PCB assembly? Or would you prefer Exceptional PCB assembly? Because there’s a world of difference between the two. If you require any further information, feel free to visit our site or contact us.

Website
NINGBO FRIMA INDUSTRY CO. LTD.

China

FRIMA Precision machining is an ISO9001: 2008 and TS16949 certified manufacturer and supplier company whose 8, 000 square foot machine shop in Ningbo, China, houses virtually every precision CNC manufacturing capability you could ever need. Major Capabilities FRIMA CNC machining features live tooling for milling, drilling, tapping, facing, cross drilling, and turning varied metals and plastics parts for our customers in USA, across the European and Australia. We have excellent capability to produce turning and milling machining parts with multi-spindle machines in mild steel, brass, stainless steel, aluminum and plastic. All of specification is strict with customized requirement the minimum tolerances could be up to+/-0.002 mm All kind of plastic parts can be customized in ABS, HDPE, LDPE, Nylon6/66, PC, PEEK, PET-P, PFE, POM, PP, PPS, TEFLON, etc. Besides, we also provide professional surface treatment service forall of machining parts, including grinding, polishing, Hardenning deburring, heat treatment, plating, coating , painting, etc. Experience & Service FRIMA Manufacturing has 20 years of experience fabricating CNC products for the high-tech/bioscience, aerospace, textile, dental, medical, automotive, military, food service, and medical industries. Delivery Located in Ningbo, we had the one of the largest export port-the Ningbo Port, shipping to every country in the world. And we are much close to Shanghai air port in two hours, keep the fast air shipping to your place.

All the products for "components for electric motors"

Custom Made auto shaft

Custom CNC Machined Shafts

Website See all products
PJM MECHANICAL CO.,LTD

China

Always adhere to the production and operation strategy of deeply cultivating China and laying out the global layout, the business scope covers motors, actuators, gearboxes, electronic control, using professional and efficient e-commerce platforms and overseas strategic partners to build domestic and foreign industrial chain in the global industrial chain. We are motion control products supplier and also offer kinds of linear drive solution for you. Tailor-made service is welcome.

All the products for "components for electric motors"

3 size type dc brush motor

12V compact design linear actuator

vending machine motor

electric piston actuator

actuator motor

Website See all products
LBI

France

LBI (Les Bronzes d’Industrie) is a foundry that provides centrifugal (spun) casting. We have the capacity to handle a wide range of diameters, from 80 to 5000 mm and up to 20 tonnes, working with alloys created in-house. Our catalogue includes copper alloys, stainless steels, special steels and aluminiums. We manufacture and machine round items (rings, sleeves, tubes and cylinders) using centrifugal (spun) casting processes. We deliver parts as blanks or machined.

All the products for "components for electric motors"

Circuit breaker ring

Website See all products

ELECTRIC POWERTRAIN

United Kingdom

A FULL ELECTRIC POWERTRAIN DESIGNED & BUILT FROM A SINGLE SOURCE! We have all the components necessary to build your own electric vehicle drive system configured to your need, including LED display, control units, battery, motor and software, perfect for implementation into small and mid-size vehicles. As a systems provider, we offer digitally controllable, perfectly aligned drive solutions from a single source. We supply all components required for a modern electric drive while at the same time taking responsibility for the reliable functioning of the overall system. Drive solutions are not only used in the field of electric mobility, but also in our other competence markets of medical technology, robotics, and mobile tools.

All the products for "components for electric motors"

Drive Unit (DC Brushless Motor)

Motor Controller

See all products
XUCHANG ERIC INSULATION PRODUCTS CO., LTD

China

Xuchang Eric Insulation Products Co., Ltd. is a professional manufacturer of producing many different kinds of electrical insulation materials which is suitable for transformers, reactor, motors, electrical cables, and other electrical industry. The main productions: 1 Flexible Insulation Laminates 2 PET and Kapton 3 Insulating Pressboard 4Rigid Laminated 5 Impregnated Products 6 Fiberglass Tubes 7 Electrical Insulation Binding Tape Eric always holds the principle of Talent-oriented, and puts science and technology in the first, employs qualified professionals to develop new products and meet market demand, which gradually forms a production base of polymer and new materials. Eric has formed a collection of high-quality production and management team which has the capability of being adapted to the market and to the user and sustainable development and innovation.
LONDRICHIP

Brazil

Londrichip is based in Londrina, Parana (Brazil). They have been established since the 80s, manufacturing electronic products using plastic fabrication (CNC) machines. They also supply a number of electronic components and transistors.
ELOBAU GMBH & CO. KG

Germany

The company ELOBAU GMBH & CO. KG, is a Manufacturer/ Producer, which operates in the Active electronic components industry. It also operates in the Magnets, electrical and electronic components for motor vehicles, industrial button remote control, sensors, and Magnets industries. It is based in Leutkirch, Germany.
PETER RENZ SP. Z O.O.

Poland

The company PETER RENZ SP. Z O.O., is a Multi-Category, which operates in the Couplings, mechanical industry. It also operates in the Axles, vehicle, Steering wheels and columns, coaxial reducers, Axles, vehicle, Steering wheels and columns, and electrical and electronic components for motor vehicles industries. It is based in Grójec, Poland.
BRIGHTLOOP CONVERTERS

France

The company BRIGHTLOOP CONVERTERS, is a Manufacturer/ Producer, which operates in the Electronics - studies and research industry. It also operates in the electrical and electronic components for motor vehicles, and aviation industry equipment industries. It is based in Paris, France.
ASTRO MOTORENGESELLSCHAFT MBH & CO.KG

Germany

ASTRO Motorengesellschaft was founded in 1983. The company has been continually expanding and is now the premium manufacturer of electric motors in a power output range of up to 200 watts. The electrical engineer Walter Hopp developed a new type of synchronous motor in three power output levels. This formed the foundations of our current product range. ASTRO Motorengesellschaft mbH produces electric motors in a low power output range (up to 200 watts), stands out as a world-renowned drive specialist and has been a reliable partner for more than 25 years for numerous leading countries both at home and abroad. Strengths: * flexible adaptation to customer requirements * diverse combinations of motor and gearing designs possible * production quality that is always at the very highest level * Quick order processing on schedule are all in a day's work. The products are long-lasting, boasting high technological quality and an attractive design. Thanks to their excellent compliance with standards, the motors and components are used at home and abroad without any problem. The team consists of highly-qualified skilled workers and university graduates. Continuous research in collaboration with local universities as well as further development of the product range are another cornerstone of success.

Website
STOPARTS LTD

Turkey

Established in 2012, STOparts is a company supplying spare parts for all types of heavy machinery and equipment from manufacturers and dealers in Turkey. Today we work with more than 120 manufacturers in various areas, both in the wholesale and retail segments of the market. All manufacturers of spare parts with which we cooperate on spare parts for special, construction, and agricultural machinery produce products of very high quality. We export to many countries in Europe, America, and Asia. Today, we have the opportunity to supply spare parts and components for trucks, special equipment, construction equipment, and agricultural equipment. We can also manufacture any spare parts for you upon your request. Our specialization : Stoparts is under the SORS brand in wholesale and retail spare parts supplies for all types of heavy equipment. Timely delivery of spare parts for special equipment is the primary mission of our company. You can order components for the following units and systems of heavy equipment from us: -Axles and differentials; -Engines (internal combustion engines (ICE)) and electric motors; -Cooling systems; -Hydraulic system; -Transmissions (gearboxes) and many more to be discovered on our website! Please do not hesitate to contact us for more information!

Website See all products
F.M.V. TRASMISSIONI MECCANICHE S.R.L

Italy

F.M.V. TRASMISSIONI MECCANICHE has been on the market since the 1960s: it manufactures castings and finished mechanical parts, ready for assembly, specifically custom-tailored or mass-produced (all in compliance with UNI and DIN standards). We specialise in the production of grooved pulleys in aluminium alloy and take care not only of metal casting but of the whole machining process, up to the finished product ready for assembly. To date, skill, creativity, and competence have led F.M.V. to be the supplier for most companies manufacturing construction and agricultural machinery, food machinery, electric motors, tyre changers, pumps, and many other mechanical machines, both nationally and internationally. Indeed, the company has direct presence in international markets such as France, Spain, The Netherlands, Belgium, United Kingdom, Ireland, Sweden, Romania and South Africa, and is found indirectly all over the world, thanks to the mechanical components it produces.

Website
ELBAT CJSC

Armenia

ELBAT CJSC was founded in 2007 as a joint German-Armenian enterprise. The state of the art production plant is built on a flexible manufacturing system that adapts to different product creativity and design. Elbat offers full-line of batteries for every type of vehicles from municipal, cars, motor coaches, trucks to heavy duty such as agricultural and construction vehicles. Our products are designed to outlive the high demand of electric usage in a vehicle, the severe climate changes and rough road condition backed with good value wholesale pricing and generous warranties. Elbat invested in one of the most effective state of the art anti-pollution equipment for water and air with a large capacity to filter impurities and harmful junctions. Elbat complies with European safety, health and environmental regulations. QMS: ISO 9001: 2008 and EMS: ISO 14001: 2004 certificates were achieved in 2011, before launching its first products. Now Elbat produces 3 types of batteries: Conventional Lead Acid Starter Batteries, Maintenance Free-CA/CA Technology batteries and Low Maintenance/ Hybrid Technology batteries. Elbat's well equipped laboratories test at each stage the battery components and characteristics according to the European and international standard requirements to ensure quality control.Every new battery on the production line is tested based on CCA parameters to assure each battery delivered to the customer is 100% power and quality guaranteed.

See all products