Carbon coatings - Import export

Just pick it up and start measuring. This handheld is the most innovative one in terms of contactless coating thickness measurement. Would you like to measure the coating thickness early in the process in order to save material and avoid coating mistakes? Then the coatmaster Flex is the right measurement device for you. Optimize your process and get your coatmaster Flex now. If you are not completely satisfied within the first 30 days after delivery, you can return it free of charge.The coatmaster technology (ATO) allows the thickness of the coating to be measured immediately after application. The technology operates contactless and non-destructive without dangerous emissions and is suitable for coating metal, paper, rubber, ceramics, glass, plastic and wood surfaces.

TECHNICAL DETAILS Powder filler for all types of interior filling work on uneven substrates (rough precast concrete, for instance). COMPOSITION AND APPEARANCE Plaster-based powder coating containing calcium carbonate, resin and various additives. The mixed paste is white in colour. SUITABLE SURFACES Interior walls and ceilings: Bubble concrete, bare concrete, cellular concrete, irregular plaster, heating ceiling, uneven surfaces, etc. OVERLAYING After the filler has dried completely, suitable for covering with all types of plaster-based coatings, thick coatings, wall paper or wall coverings. TECHNICAL CHARACTERISTICS • Granulometry : Up to 0.2 mm • Adhesion : complies with NFT 30 608 • pH : neutral PACK SIZE 5 and 25 kg bags on shrink-wrapped pallet. STORAGE 9 months in unopened original packaging stored away from moisture. PREPARATION OF SURFACES Surfaces must comply with DTU 59.1, i.e. be clean, dry, dust-free and free from all traces of form oil.

COMPOSITION AND APPEARANCE Plaster-based powder coating containing calcium carbonate, resin and various additives. The mixed paste is white in colour. SUITABLE SURFACES Concrete, chipboards, cement coating, aerated concrete. REFERENCE DOCUMENTS DTU 25.41 and 25.42. Standard NF EN 14496. CE mark. TECHNICAL CHARACTERISTICS • Setting time: 2 hours. • Reaction to fire A1. PACK SIZE 25 kg bag on shrink-wrapped pallet. 5 kg bag. PREPARATION OF SURFACES The wall surface must be sound, free from dust and oil, and show no signs of damp. In summer if the supports are too dry, they may be slightly moistened. QUANTITY OF MIXING WATER 12.5 litres of water per 25 kg bag. APPLICATION Generally applied in “dabs” approx. 10 cm in diameter, with 30 cm horizontal spacing and 40 cm vertical spacing on the plasterboard or insulation.

COMPOSITION AND APPEARANCE Plaster-based powder coating containing calcium carbonate, resin, cellulose fibre and various additives. The mixed paste is white in colour. REFERENCE DOCUMENTS • DTU 25.41. Standard DIN 1168 • DTU 59.1: painting work • NF EN 13963 TECHNICAL CHARACTERISTICS • Granulometry: fine • Adhesion: complies with NFT 30 608 • pH: neutral APPLICATION • SEALING PLASTERBOARDS WITH ROUNDED EDGES Apply a first pass by filling the joint deeply, apply a second pass after 1 1/2 hours to smooth and finish the joint. Filling and bonding (if tape) in one pass. And finishing is possible in a single layer. • FILLING, ASSEMBLY, SEALING Dilute with 45% water. 2.2 l to 2.3 l water per 5 kg bag or 11 l to 11.5 l for 25 kg. Open bevelled cracks or rifts. Apply with a putty knife or spatula. Completely fill up the part to be filled, smooth carefully. Time of use: 45 min. Hardening: approx. 1 hour.

Knight Optical are very experienced within the Thermal Imaging market, including anti-reflective and diamond-like-carbon coatings used on the optical components in these systems. Knight Optical know exactly what you are looking for. Thermal imaging uses infrared materials such as Germanium and Silicon, however in there raw form the transmission is not the best it could be. For example, Germanium typically transmits at <45% but with an AR coating applied, it can improve transmission to >60%. This increase in transmission means that the camera sensor receives a better signal through the protective window. Also with protective windows, we can provide high quality DLC coatings. We ensure the coating is Salt Fog Tested to MIL-SPEC standard to ensure that the coating withstands harsh environments. The coating has high mechanical hardness and high resilience to external stress. Read PDF for more information

Knight Optical can offer you the solution for your CCTV Cameras! CCTV Systems use Germanium Windows for their properties which make them ideal for thermal imaging and night vision use. Germanium Material offers excellent transmission across the IR wavelength range. Making it ideal for use within Thermal Imaging Cameras; which are used extensively in CCTV applications. Germanium typically operates in the 2µm to 14µm spectral range; that covers the LWIR (8-12μm) and MWIR (3-5μm) thermal imaging wavelength range. Our Germanium windows are available from stock, custom size and shape with Anti-Reflection coatings on one or both sides, and/or with Hard Carbon Diamond coatings. Custom coatings for Germanium windows available on you request and to your specific requirement with diameters up to 300mm diameters. Read PDF for Info

Are you looking for a popular high refractive index and good IR transmission range material covering from 1.8-16µm? Here we are; Knight Optical’s Germanium glass material is ideal for your IR applications with its broad transmission range and opacity in the visible portion of the spectrum. Our Germanium windows are not only used in IR sensors, medical applications, and pyrometry; but also in IR imaging systems, and thermographic cameras. Typically operating in the 2µm to 14µm spectral range; that covers the LWIR (8-12μm) and MWIR (3-5μm) thermal imaging wavelength range. Our Germanium windows are available from stock, custom size and shape with Anti-Reflection coatings on one or both sides, and/or with Hard Carbon Diamond coatings. Read our PDF for more details...

The effect of carbon film + far infrared ray + near infrared ray + illite ceramics! Far-infrared rays remove impurities and dead skin cells from the skin surface, and near-infrared rays penetrate to the dermis and burn fat. By attaching a rare mineral Illite, the effect of far-infrared rays is more than doubled. 1. Made of airplane wing material, it is lightweight. 2. It is safe from fire by using carbon fiber. 3. A rare mineral ilite, produced only in Yeongdong-gun, Chungbuk, is attached. 4. Once purchased, it can be used semi-permanently. · Size : (width) 58cm / (length) 68cm / (height) 33cm · Rated Voltage : 220V 60Hz · Power Consumption: 440W · Material : external finishing(leather), reflection film, thermostat finishing, metal structure, radiant heat(pyrogen) film, carbon coating fiber, ceramic + silicone adhesive

Stainless steel is an alloy of steel with chromium content that is a better resistant to rusting and corrosion compared to carbon steel. For storing corrosive chemicals and liquids, often traditional coatings of carbon steel does not offer enough protection. For such material, stainless steel tanks offer more durable and long lasting storage. Novelty Steel is an experienced fabricator of steel tanks. With our modern CNC Machinery Park and experienced engineering team, Novelty Steel produces bespoke steel frames according to the EN 1090-2 European Norms. Some examples of the stainless steel tanks are: * Fixed-roof tanks * External floating roof tanks * Internal floating roof tanks * Domed external floating roof tanks * Horizontal tanks * Pressure tanks * Variable vapor space tanks * LNG (Liquefied Natural Gas) tanks

Hand wire brushes are used for most manual cleaning processes where corrosion, deburring, debris or detritus is a problem. Alternatively they also create surface abrasion. Our very extensive range of wire brushes are available in all types of wire including: Carbon Steel, Zinc Coated, Brass Coated, Tin Coated, Galvanised, High tensile, Spring Steel, Stainless Steel, Inconel, Nickel Silver, Brass, Phosphor Bronze, Beryllium Copper & Titanium. Handles are available in Beech, Marine Plywood, Polymers, Aluminium & Copper. Handle sizes are dependent on the application and we are able to supply bespoke handles if required.

FINISHES: SURFACE QUALITY PROPERTIES OF THE COATINGS GALVANISED STEEL according to EN 10142 Check our website for coating mass, coating finish, surface quality and protection surface treatment. If the customer does not require the surfaces to be oiled and/or chemically passivated, this must be clearly indicated when requesting the quote and placing the order. THICKNESS TOLERANCES Thickness tolerances according to EN 10143 for nominal widths. WIDTH TOLERANCES Tolerances on wide strips obtained by longitudinal cutting of a width of less than 600 mm.According to Standard EN 10143 of: w < 125; 125 w < 250; 250 w < 400; 400 w < 600. Other, closer dimensional tolerances under a commercial agreement. SAG TOLERANCES Edge curve tolerances under commercial agreement

FINISHES: SURFACE QUALITY PROPERTIES OF THE COATINGS GALVANISED STEEL according to EN 10142 Check our website for coating mass, coating finish, surface quality and protection surface treatment. If the customer does not require the surfaces to be oiled and/or chemically passivated, this must be clearly indicated when requesting the quote and placing the order. THICKNESS TOLERANCES Thickness tolerances according to EN 10143 for nominal widths. WIDTH TOLERANCES Tolerances on wide strips obtained by longitudinal cutting of a width of less than 600 mm.According to Standard EN 10143 of: w < 125; 125 w < 250; 250 w < 400; 400 w < 600. Other, closer dimensional tolerances under a commercial agreement. SAG TOLERANCES Edge curve tolerances under commercial agreement

High-quality PVC wire in different wire diameter and coating options. Material: PVC coated low-carbon steel wire Coating: 1.00 mm PVC coating on hot-dip galvanized steel wire Wire Diameter: Ø3.00 – 4.00 mm

High quality slitter blade in stainless steel with ceramic coating on the edge for best result in production of plastic film, when cutting white plastics. The blade has an extreme durability, and is very robust with its thickness of 0.4mm. The blade has a fine grain structure which ensures that the coating will protect the edge for as long as possible. Suitable for: White plastics with a high percentage of chalk / white pigments Coating: Ceramic Approved by the FDA to come in contact with food in the US Similar to the structure of the coating DLC / diamond like carbon coating Packaging: 100 blades packaged in an industrial type package where you can see how many blades remain https://www.sollex.se/en/product/slitter-blade-57x187x040mm-rounded-corners-ceramic-coated

High-quality galvanized wire in different wire diameter and coating options. Material: Low-carbon steel wire Coating: Hot-dip galvanized (Zn) Wire Diameter: Ø1.50 – 5.00 mm Volume of Coating: 40 - 300 g/m² Tensile Strength: 350 - 900 N/mm²

Filter holding frames are made of Ltype steel bars welded together to the rectangular frame shape and consisting of zinc coated carbon steel resp. stainless steel. With adjustable tension springs the frames are perfectly suited for installation of all commercially available pocket filters, compact filters or for filter combination systems. The header frames of the filters are going to be formclosed fixed inside to our holding frame at 4 edges by help of 4 tension springs. With 2 detents and 2 spring centre points the filters inside the holding frame can be safely bend, at height of 25 mm and 50 mm ( 1 and 2 inch ). From the filter holding frames a complete filter wall can be easily & fast established by simple screwing together. On request stainless steel versions are available.

Limit values (so called MAK-value) for pollutants in ambient air have been defined by law, which should not be exceeded. This is done with the help of specially coated activated carbon that is amongst others in the activated carbon filter, and removes pollutants from the air of the wearer. But from the first, the breathing air needs to contain at least 19% oxygen! Dependent on application area you can choose between filter types as follows: Type A: colour code: brown Organic vapour or gas with boiling point above 65°C Type AX: colour code: brown Organic vapour or gas with boiling point under 65°C Type B: colour code: grey Inorganic vapour or gas (no CO) Type E: colour code: yellow Sulphur dioxide and acid gases or vapour Type K: colour code: green Ammonia and ammonia derivates Type Hg: colour code: red Mercury vapour Type CO: colour code: black Carbon monoxide Type P: colour code: white Dust Breathing filters, depending on filter type, can remove certain pollutants from...

NKCG produces graphite tube technology (GF-AAS) for medical analysis. The target of the process is to determine the elements and obtain optimal results in medical analysis. These tubes and cuvettes are coated by CVD pyrolytic carbon coating (NK-PyC) and furthermore purified (NK-PURE).

Annealing is a heat treatment process that actually changes the physical and chemical properties of the wire. This is what causes durability and increased ductility while making the wire easier to work with too. Normalization and global annealing are performed: Construction industry – mainly for iron setting in the civil construction field Handicrafts Packaging of products – used as tie wire Silk weaving hay bailing in the agricultural field Fencing products including barbed wire Screw and bolt manufacturing PRODUCT STANDARD EN 10218 QUALITY & RAW MATERIAL SATNDARD EN 10263-1,EN 10263-2 EN 10263-3 EN 10263-4 standarts of SAE 1008, SAE 1006, SAE1018 20MNB 4, CQ 15, QST36 DIAMETERS Ø 1,00 mm - Ø 30,00 mm PACKAGING 50 to 1000 kg coils

Galvanized wire has a zinc coating, which has anti-corrosion purpose. The combination of the strength of steel with reliable protection against corrosion has led to its widespread use in many industries. Most often it is used for the manufacture of the following products: a wide range of meshes, cables of various strengths, spring group products, grounding devices, including lightning rods, • various electrodes, including welding.

Mood is a modular kiosk line with a custom look and feel. It can have a steel, wooden, stone or fabric look, by offering several finishes. This multimedia terminal evolves with your needs - the standard body easily integrates aesthetically consistent modules in powder coated carbon steel, resulting in a wide range of tailored end-products.

Because of its high content of iron, the steel alloy reacts quickly to oxygen and moisture. Steel alloy, which is considered as a very strong metal type, is resistant to chemical abrasion and corrosion due to this feature. Galvanized Wire, which is obtained by coating the steel wires with Zinc (Zn) in certain proportions, depending on their usage areas, is highly resistant to adverse situations such as abrasion, corrosion and scratching. Material: Low and high carbon steel wire Coating: Hot Dipped Galvanize (Zn)/Galfan(ZA) Wire Diameter: 1.00 – 10.00 mm Volume of Coating: 40-400 gr / m² Tensile Strength: 350-1750 N/mm² Coil Weight: 100-1.200 kg Packaging: Rosette coil Due to its durability, hot-dip galvanized wires are preferred in many industrial fields; production of fence, wire mesh, barbed wire, razor wire, security panels, cage wire, bucket handle, poultry wires, hanger wires, suspended ceiling wires, pvc coated wires and etc.

copper nitrate trihydrate Cu(NO3)2.3H2O CAS No. : 10031-43-3 Copper Nitrate Cas No.3251-23-8 copper chloride Copper Chloride Dihydrate Cucl2.2h2o Cas No.10125-13-0 copper carbonate Copper Carbonate,Cas:12069-69-1 copper I oxide copper oxide Cuprous Oxide Cas No.1317-39-1 copper II oxide Copper Oxide. CAS No.: 1317-38-0 zinc ammonium chloride double salt phosphating chemicals zinc carbonate ZINC CARBONATE BASIC cas no.5263-02-5 zinc phosphating zinc chloride solution zinc amonium cloride zinc nitrate Zinc Nitrate Cas No.:10196-18-6 Zinc nitrate, hexahydrate. CAS No.: 7779-88-6 Manganese(II) chloride CAS:7773-01-5 Manganese Chloride Tetrahydrate Cas No 13446-34-9 manganese phosphating coating Manganese Carbonate Cas No.598-62-9 Manganese Dihydrogen Phosphate. CAS No.: 18718-07-5 copper nitrate solution