Protective packaging - Import export

COMPOSITION AND APPEARANCE Resin, water, calcium carbonate, lightening fillers, preservatives and various adjuvants. The resulting paste is white in color. SUBSTRUCTURES ADMITTED All types of plasterboard with or without insulation with tapered edges and cardboard faces. COATINGS Printing undercoat for gypsum plasterboard. Smoothing coating. TECHNICAL CHARACTERISTICS - Adhesion of the tape: > 1000 g - Cracking: no cracks up to 5 mm thick - Density: 1.2 STORAGE 9 months in original unopened packaging, protected from frost and heat. APPLICATION Before treatment of the joints themselves, the panels must be filled between accidentally non-joined panels and various fillings). The application is done manually by "buttering" the thinned panels with a 10 or 15 cm coating knife and placing the strip in place. Then carry out a finishing pass, let dry and finish to mask the strip. For vertical protruding corners, use a reinforced strip or a metal angle iron.

COMPOSITION AND APPEARANCE Powder coating based on plaster, calcium carbonate, resin, and various additives. The paste obtained is white in color. ADMITTED SUPPORTS All types of plasterboard with or without insulation with tapered edges and cardboard faces. COATINGS Plaster-based smoothing plaster. TECHNICAL SPECIFICATIONS - Setting time: 1/2 hour - Adhesion of the tape: > 1000 g - Cracking: no cracks up to 5 mm thick - Density: 0.9 - Reaction to fire: A1 STORAGE 9 months in original unopened packaging protected from humidity. SURFACE PREPARATION The plasterboards will be fixed in accordance with DTU 25.42. APPLICATION Before treatment of the joints themselves, the panels must be filled between accidentally non-joined panels and various fillings The application is done manually by "buttering" the thinned panels with a 10 or 15 cm coating knife and placing the strip. (Grinded face against the plaster).

COMPOSITION AND APPEARANCE Powder coating based on plaster, calcium carbonate, resin, and various additives. The paste obtained is white in color. SUBSTRUCTURES ADMITTED All types of plasterboard with or without insulation (glass wool, rock wool, polystyrene) with tapered edges and cardboard faces. COATINGS Printing undercoat for gypsum plasterboard. Plaster-based smoothing plaster. TECHNICAL SPECIFICATIONS - Setting time: 2 hours - Adhesion of the tape: > 1000 g - Cracking: no cracks up to 5 mm thick STORAGE 9 months in original unopened packaging protected from humidity APPLICATION Before treatment of the joints themselves, the panels must be filled between accidentally non-joined panels and various fillings. The application is done manually by "buttering" the thinned panels with a 10 or 15 cm coating knife and placing the strip. Then carry out a finishing pass, let dry and finish to mask the strip. Also mask the screw heads.

COMPOSITION AND APPEARANCE Powder coating based on plaster, calcium carbonate, resin, and various additives. SUBSTRUCTURES ADMITTED All types of plasterboard with or without insulation (glass wool, rock wool, polystyrene) with tapered edges and cardboard faces. COATINGS Printing undercoat for gypsum plasterboard. Plaster-based smoothing plaster. TECHNICAL SPECIFICATIONS - Setting time: 4 hours - Adhesion of the tape: > 1000 g - Density: 0.9 - Reaction to fire: A1 STORAGE 9 months in original unopened packaging protected from humidity. RATE OF MIXING 10 to 11 liters of water per 25 kg bag. APPLICATION Before treatment of the joints themselves, the panels must be filled between accidentally non-joined panels and various fillings. The application is done manually by "buttering" the thinned panels with a 10 or 15 cm coating knife and placing the strip. Then carry out a finishing pass, let dry and finish to mask the strip. Also mask the screw heads.

Cleanroom apparel compatible from Iso class 4. Coverall meets Category 3 Type 5/6. Bound seams and tunneled elastics. Elasticated thumb loop. Threepanel hood. Adhesive protective flap. Double packaging fully sealed. BONUS ADDON Breathable fabrics and ergonomic style pattern help to reduce the risk of heat stress. New material MICROMIUM®, light and very low contaminant In a cleanroom environment, the operator is the main vector of contamination. The clothing worn plays an essential role in minimizing the risk of contamination. The MICROMIUM® material used for the design of the WEEPRO LABO® suit minimizes the shedding of par­ticles quite dramatically. The results obtained on the performance of the particle deposit fall well below category 1 (the most selective category). These tests were carried out on the basis of the HELMKE drum test method. This new cleanroom clothing meets all of the latter requirements of ESP RP CC003.4, namely

Cleanroom apparel compatible from Iso class 4. Apparel sterilized by gamma irradiation Coverall meets Category 3 Type 5/6. Bound seams and tunneled elastics. Elasticated thumb loop. Threepanel hood. Adhesive protective flap. Double packaging fully sealed. BONUS ADDON New material MICROMIUM®, light and very low contaminant In a cleanroom environment, the operator is the main vector of contamination. The clothing worn plays an essential role in minimizing the risk of contamination. The MICROMIUM® material used for the design of the WEEPRO LABO® suit minimizes the shedding of par­ticles quite dramatically. The results obtained on the performance of the particle deposit fall well below category 1 (the most selective category). These tests were carried out on the basis of the HELMKE drum test method. This new cleanroom clothing meets all of the latter requirements of ESP RP CC003.4, namely Properties of the materials used in the design

Cleanroom apparel compatible from Iso class 4. Apparel sterilized by gamma irradiation Coverall meets Category 3 Type 5/6. Integrated overboot with elasticated wrap at ankle Antislip sole. Bound seams and tunneled elastics. Elasticated thumb loop. Threepanel hood. Adhesive protective flap. Double packaging fully sealed. BONUS ADDON New material MICROMIUM®, light and very low contaminant In a cleanroom environment, the operator is the main vector of contamination. The clothing worn plays an essential role in minimizing the risk of contamination. The MICROMIUM® material used for the design of the WEEPRO LABO® suit minimizes the shedding of par­ticles quite dramatically. The results obtained on the performance of the particle deposit fall well below category 1 (the most selective category). These tests were carried out on the basis of the HELMKE drum test method. This new cleanroom clothing meets all of the latter requirements of ESP RP CC003.4, namely

BH800 TYPE 3/4. EN14126 EN 13982 EN14605 EN 13034 93/42/EEC BH-500 TYPE 5/6 EN14126 EN 13982 EN 13034 93/42/EEC