Washers - Import export

Wave Washers are washers with a wave form and gives an axial force when the waves are flattened out during compression. The function is similar to wave springs, but wave washers have only one coil

As a specialist for special parts, we are your competent partner for high-quality fasteners: made of any special materials according to drawing to specification / factory standard according to special standard (for example DIN 2510) according to technical regulations (eg AD-W2, AD-W7, AD-W10, TRD 106, etc.) with all acceptances and double approvals (for example, works certificate 2.1, works certificate 2.2, acceptance test certificate, 3.1, acceptance test certificate 3.2, TÜV, Germanischer Lloyd, etc.)

The effective protection against self loosening and unscrewing. The "NSK" LOCK WASHER is the improved design of the "SK" LOCK WASHER. It also prevents self-loosening of screwed joints and damage to the bearing surfaces and consequent variations in the tightening torques, as they occur in threadlockers with teeth are avoided with lock washers through the special geometrical shape of the locking edges even better than the proven "SK" LOCK WASHER.

The contact lock washer to NFE 25-511 and SN 70093 with grooved surface provides the designer the ability to secure wobble-prone screw effectively. It is particularly suitable for use on slot fasteners, dynamic cross-loaded to the screw connections and applications that require high biasing forces. Operational: The contact wheel ensures positively spring and a form-fitting locking. Form S = narrow - for small headrests Form M = average - for normal headrests Form B = wide - for large pressure transmission surfaces and slot fasteners Form K = serrated - for electrically conductive connections with contact teeth (SN 70093)

Double coil helical spring lock washer for railway use.

Washer components Screws with one or two captive rolled on bottom parts Manufactured according to DIN, ISO or customer drawing

This automatic washing & drying system provides high efficient cleaning of elastomers in through-feed method (on option washing with de-ionized, de-mineralized or ultra-pure water possible). Starting from the loading station, the washing drums are conveyed automatically to each washing station (→ station pre-washing → station rinsing → station high pressure cleaning → station high pressure drying) and are finally conveyed to the unloading station after treatment. The dimensions of this system depend on the drum dimensions desired (perforation from 3 - 15 mm possible by choice). Set as our default, the models WD3, WD5 and WD9 are available with different sizes. For industry 4.0 demands, this system is best prepared. Standardwise, a monitoring of the processing data via network is possible also from an external working place. On option, the control of the machine via OPC-UA server can be installed additionally. Siliconisation or other coating of elastomers is possible on option.

This machine provides high efficiency cleaning of medical and technical elastomers and is construed for big sized batch demands at high throughput. The comfortable touchscreen panel allows a fast and easy operation of all parameters as well as administration of your washing recipes. Depending on water quality or rather cleanliness requirements, a treatment with de-ionized, de-mineralized or ultrapure water is possible by add-on module on option. For industry 4.0 demands, the W90 is best prepared. Standardwise, a monitoring of the processing data via network is possible also from an external working place. On option, the control of the machine via OPC-UA server can be installed additionally. By special request, siliconisation of rubber parts or coating with other glide agents is additionally possible. The W90 offers maximum economic efficiency on treatment of big batch volumes at high throughput!

This machine offers high efficiency cleaning of medial & technical elastomers and is construed for mid sized bach demands. The W40 is, like any of our machines, designed for high performance with economic efficiency. The comfortable touchscreen panel allows a fast and easy operation of all parameters as well as administration of your washing recipes. Depending on water quality or rather cleanliness requirements, a treatment with de-ionized, de-mineralized or ultrapure water is possible by add-on module on option. For industry 4.0 demands, the W40 is best prepared. On option, the control of the machine via OPC-UA server can be installed additionally. By special request, siliconisation of rubber parts or coating with other glide agents is additionally possible. The W40 is the optimal solution for mid-sized batch demands at high througput!

This small-sized machine can be integrated into the production line easily. This safes temporary storage or extra transports and finally corresponding time loss and costs. The comfortable touchscreen panel allows a fast and easy operation of all parameters as well as administration of your washing recipes. Depending on water quality or rather cleanliness requirements, a treatment with de-ionized, de-mineralized or ultrapure water is possible by add-on module on option. By special request, siliconisation or coating with other glide agents is also possible. The W30 uses exchangeable bastekts for the (un)loading. These baskets are also compatible to our cryogenic deflashing machine E30W, and furthermore, optimally suited for a linear in-line processing → production → deflashing → washing → postcure tempering, The W30 is best pepared for industrie 4.0 demands. (on option with OPC UA server) With this small-sized machine, your treatment capacity is at best cost-performance ratio!

Sperical washers ant conical seat DIN 6319

AIR WASHER AW 10 SLow-maintenance 3-in-1 comfort device for air humidification and purification Usually, we spend 80 % of the day indoors, where the room air is often untreated and not ideally adapted to our natural needs. Too dry and dusty air does not only make residents but also the furniture suffer. In contrast, air that is humidified and cleaned on a natural basis is a boon: with the air washer AW 10 S you can breathe freely again and conveniently prevent colds and dry coughs caused by dried-out mucous membranes, as well as damages to furniture, parquet floors or musical instruments caused by too dry air. The AW 10 S is a 3-in-1 combination device – it does not only humidify the air by means of self-regulating cold evaporation, it also washes the air and cleans it of animal hair, house dust and pollen. Before emerging into the room the air is additionally ionised on a natural basis, whereby contaminants are neutralized and odours reduced.

AIR WASHER AW 20 S3-in-1 comfort device with combined sensor and HEPA filter – our best recommendation for a perfect room climate The air we breathe is pure vital energy; its quality has a direct impact on our well-being and health. And since we breathe in about 8,000 litres of air each day – approx. 80 % of which indoors –, an ideal room air quality is a decisive factor for vigour and vitality. The air washer AW 20 S is perfectly equipped to ensure optimum room air quality at all times. In addition to the relative humidity, the intelligent combined sensor also permanently detects the particle burden of the room air and autonomously controls the automatic mode for perfectly humidified and cleaned air.

VH - VHD - VHZ - technical characteristics according to DIN 128 A / SN60727

According to Bahn-Norm BN 208012-T6 and SN60727 The reliable security device to prevent wide range of bolted assemblies from unscrewing and loosening. The locking edge washers provides a effective method of securing bolted assemblies that are effected by vibration.

Delivery program: Plastic Screws From M3 x 20 mm to M10 x 60 mm. Plastic Knurled screws DIN 653 from M3. Plastic Transverse-hole screws DIN 404 from M3 x 20 mm. Plastic Nuts From M3 Plastic Threaded pins DIN 551 from M3 Connection elements Other connection elements such as discs, caps, spacers and diverse articles moulded from all commercially available plastics (granulate). All articles are available with the specifications listed next. Materials: Articles moulded from PA, POM and all other plastics (granulate) commonly available on the market. Standards: According to DIN/EN/ISO or drawings. Colour: According to RAL table or individual customer wishes.

The effective protection against self loosening and unscrewing. The "SK" Serrated Locking Washer prevents self-loosening of screwed joints. Damage to the bearing surfaces and consequent variations in the tightening torques, as they occur in threadlockers with teeth are avoided with lock washers through the special geometrical shape of the locking edges. shape S (small) shape M (middle) shape B (wide) shape Z (for screws with cylindrical head shape) shape K (for electrical contacts)

Spring lock washers acc. to DIN 127

Pins, washers and split-pins for wedge sockets acc. to DIN EN 13411-6 galvanized surface *material: ST

Pins, washers and split-pins for wedge sockets acc. to DIN 43148 galvanized surface

MODEL NAME VersionTN-PRO-IF 4 PRO Pixel Pitch4mm Pixel ConfigurationSMD2020 LED Space Black Processing 16 Bit Processing- Pixel Density / m262500 Resolution/SQM250 x 250 Cabinet Resolution 640x480160 x 120 Pixel Density / Cabinet19200 Module Size (mm)320x160 Cabinet Size (mm)640 x 480 x 70 Module Per Cabinet6 MODULE Module Resolution80 x 40 Weight Per Panel Net kg. 640x480mm6,5 Rotation per 90 Degree✓ Free Rotation (with R5)❍ Mapping✓ Clear View❍ Low Latency❍ HDR❍ Power Consumption (<w/sqm) 450 Average Power Consumption (<w/sqm)135 Driving Method 1/20 Brightness>1100 Nits Refresh Rate- Refresh Rate High Refresh>3840Hz Refresh QualityHigh Quality High Refresh (PLL inside)- High Refresh Power Saving✓ High Refresh Dynamic Power Saving- Driving IC TypePWM Refrate Quality 2High Refresh No Waterless Ripple of Camera>%75 Cabinet MaterialDie-Casting Aliminum Horizontal Viewing Angle140 (±30) Vertical Viewing Angle 140 (±30) Expected LED Lifetime %50100,00

A plastic hot wash machine, e.g. a PET hot washer, is indispensable in a plastic recycling installation. B+B supplies customized hot washing machines.