Receivers and transmitters - Import export

The transmission sensor ACS3 is applied for measurements of self-luminous objects and transparent objects as well. Measuring the colour of self-luminous objects requires only the receiver unit, whereas a transmitter and a receiver unit are necessary when detecting transparent objects. The transmitter and the receiver unit can easily be fixed by means of a mounting set.

The optoCONTROL 2520 is a compact laser micrometer with integrated controller. A high resolution, model variant with measuring ranges of 46 mm and 95 mm as well as variable mounting distances allow a wide range of applications in quality monitoring and production control. The measurement object can be placed at any position within the light curtain and the distance from transmitter to receiver can be freely selected.

The NanoWeld stations provide the ideal platform for the development and production of opto-electronic components, like singleand multi-channel transmitters and receivers. The station works with exchangeable trays and grippers accepting all device housing types and lenses, optical fibers or receptacles to be aligned and attached. Cycle times for the rapid mass production of TOSA type assemblies reach less than 25 seconds while it takes several minutes for complex devices.All components and subassemblies to build the NanoWeld station are of highest quality and performance. Even customized systems start from a common platform which minimizes development time and cost. By using device-specific trays and grippers, the time to change between different batch processes or device types is reduced to the minimum. Loading and unloading of these trays is performed on a separate loading station outside of the automated NanoWeld. The automated alignment starts from a known reference position.

Wireless signal transmission The signals are transmitted from wireless touch probes to the SE transmitter/receiver unit via • radio or infrared for the TS 460, • infrared for the TS 444, TS 642, TS 740. This makes these touch probes ideal for use on machines with automatic tool changers. The following transmitter/receiver units are available: • SE 660 for radio and infrared transmission; shared SE for TS 460 and TT 460 • SE 540 only for infrared transmission, for integration in the spindle head • SE 642 only for infrared transmission, shared SE for TS and TT The SE 660 communicates with the TS 460 and TT 460. The SE 540 and SE 642 can be used in any combination with the TS 4xx, TS 642 and TS 740 touch probes.

Einhell mini remote control HS 434/6, 434 MHz 6-channels Coding: 16.7 million possibilities, for garage door operators BGT 63, BM 60, TA 160, TA-G 63, TA-G 83, TA-G 103, GTA 160, GTA 163, side hinged gate operator AFA 2601,EFA 1200, FA-G 2601, FAG 1601 Dimensions: 38 x 50 x 15 mm, battery: 23 A, 12 V Programming the transmitters: Hold the learning key located in the operator down for 4 seconds until the red control LED goes on. Then release the button and press the chosen control button on the manual transmitter. The red LED now off. The control code has now been stored. Note: You can store a max. 3 manual transmitters in the operator. If a fourth transmitter is stored, the code set for the first transmitter is lost. The control code is not lost in case of power failure. With malfunction pull the mains plug and repeat operation. If you want to use more than 3 transmitters, an additional receiver must be installed in the receiver /operator, than you may order transmitter...

The TT 160 and TT 460 tool touch probes aretouch trigger probes for the measurement and inspection of tools. The TT 160 features signal transmission by cable, while the TT 460 communicates wirelessly over a radio or infrared beam with the SE 660 transmitter/receiver unit. The disk-shaped probe contact of the TT is defl ected during physical probing of a tool. At that moment the TT generates a trigger signal that is transmitted to the control, where it is processed further. The trigger signal is generated through a wear-free optical switch that ensures high reliability. The probe contact is easy to exchange. The connection pin to the contact plate features a rated break point. This protects the touch probe from physical damage due to operator error.

Special design of through-beam sensor. Transmitter and receiver are located in the fork or angular limbs and are perfectly aligned to each other.

Optical sensors function contactlessly. They detect objects independent of their characteristics (e.g., shape, color, surface structure, material). The basic operating principle is based on the transmission and reception of light. There are three different versions: 1. The through-beam sensor consists of two separate devices, a transmitter and a receiver that are aligned with one another. If the light beam between the two devices is interrupted, the switching output integrated in the receiver changes its status. 2. With the retro-reflective sensor, the transmitter and receiver are located in one device. The emitted light beam is reflected back to the receiver by a reflector that is to be mounted opposite the device. As soon as the light beam is interrupted, the switching output integrated in the device changes its status. 3. With the diffuse reflection sensor, the transmitter and receiver are in one device. The emitted light beam is reflected by the object that is to be detected.

Optical sensors function contactlessly. They detect objects independent of their characteristics (e.g., shape, color, surface structure, material). The basic operating principle is based on the transmission and reception of light. There are three different versions: 1. The through-beam sensor consists of two separate devices, a transmitter and a receiver that are aligned with one another. If the light beam between the two devices is interrupted, the switching output integrated in the receiver changes its status. 2. With the retro-reflective sensor, the transmitter and receiver are located in one device. The emitted light beam is reflected back to the receiver by a reflector that is to be mounted opposite the device. As soon as the light beam is interrupted, the switching output integrated in the device changes its status. 3. With the diffuse reflection sensor, the transmitter and receiver are in one device. The emitted light beam is reflected by the object that is to be detected.