Results for
CIC - KLAUS CZERWONKA
Germany
Pneumatic standard cylinder according to DIN / ISO 6432. Available in diameters between 8 and 25 mm. Standard version in single / double-acting, with magnetic piston and adjustable cushioning. A complete range of accessories for mounting and position sensing is available.
Request for a quoteCIC - KLAUS CZERWONKA
Germany
Fastening elements, bearings and add-on elements for pneumatic cylinders according to ISO 6432 and ISO 15552.
Request for a quoteCIC - KLAUS CZERWONKA
Germany
The new generation of our pneumatic cylinders according to ISO 15552. Light and robust thanks to innovative design and high-quality materials. An aluminum piston with wear protection, reinforced bronze guides and our MF5 multifunction system with improved damping, centering and sealing ensure maximum reliability even under extreme conditions.
Request for a quoteCIC - KLAUS CZERWONKA
Germany
Sensors and proximity switches for pneumatic cylinders according to ISO 6432 and ISO 15552.
Request for a quoteCIC - KLAUS CZERWONKA
Germany
Pneumatically and electrically operated valves with connection pattern according to NAMUR. High quality aluminum construction. Available in 1/4 and 3/2 and 5/2 sizes.
Request for a quoteCIC - KLAUS CZERWONKA
Germany
Our new generation of particularly robust pneumatic cylinders with tie rods.
Request for a quoteGEMÜ GEBRÜDER MÜLLER APPARATEBAU GMBH & CO. KG
Germany
The GEMÜ 650 2/2-way diaphragm valve has a stainless steel piston actuator and is pneumatically operated. The valve is designed for use in a sterile environment. All metallic actuator components are made of stainless steel. The compression springs of diaphragm sizes 80 and 100 are made of epoxy coated spring steel. Normally closed (NC), Normally open (NO) and Double acting (DA) control functions are available. An integral optical position indicator is standard. —Hermetic separation between medium and operator —Suitable for inert and corrosive liquid and gaseous media —CIP/SIP cleaning and sterilising capabilities —Autoclave capability —Optional flow direction and installation position
Request for a quoteGEMÜ GEBRÜDER MÜLLER APPARATEBAU GMBH & CO. KG
Germany
The GEMÜ R690 2/2-way diaphragm valve has a low maintenance membrane actuator and is pneumatically operated. Normally Closed (NC), Normally Open (NO) and Double Acting (DA) control functions are available. The High-Flow valve body provides compact dimensions at high flow rates. —Same mounting height planes over multiple nominal sizes —Compact plant design due to flow optimised valve bodies —Reduced control air consumption —Varied optional accessories for measurement and control
Request for a quoteBEHRINGER GMBH MASCHINENFABRIK UND EISENGIESSEREI
Germany
Simple operation, robust design and precise cuts make the metal-cutting cold saws of the VMS series a reliable partner in the workshop and factory. They are real all-rounders when it comes to cutting solid materials, tubes and profiles. In addition to the automatic saw feed, the VMS 350 PV also offers pneumatic clamping of the material. The heart of the VMS circular saw unit is the worm gear unit with EISELE shock-absorbing feature, produced in-house. It is heavy duty and provides for a smooth, low-vibration running of the saw, which, of course, has a positive impact on the quality of the cutting surface, the blade life and the service life of the saw. A quick change of the saw blade is easily possible thanks to the large safety hood. The hydro-pneumatic saw feed can be adjusted infinitely.
Request for a quoteEISELE GMBH
Germany
- One interface for compressed air, gases, fluids, vacuum, electrical and electronic signals - Maximum modularity due to freely configurable connections - Integrated coding in the housings prevents incorrect connections - Easy, tool-free mounting and dismounting - Locking lever reduces the force needed for assembly - Machine set-up times are reduced - Fits to Eisele adaptive inserts - Coupling and slotted nut material: Chemical nickel-plated aluminum - Lever materials: anodized aluminum / 1.4301 (304) stainless steel - Other materials: 1.4404 (316L) stainless steel / A2 / POM - Knurled screw with retaining cable
Request for a quoteEISELE GMBH
Germany
- Whitworth pipe thread- Chambered O-ring - Seals NBR - Material brass nickel-plated - Temperature range -4 to 176 °F (-20 to +80 °C) - Working pressure range -14 to 232 psi (-0.95 to 16 bar) - Swiveling, not designed for steady motion of the tube - Not designed for steady motion of the tube
Request for a quoteEISELE GMBH
Germany
— Whitworth pipe thread DIN ISO 228- Chambered O-ring — Seals FPM — Material with media contact: Brass, dezincification resistant — Material without media contact: Brass — Temperature range: -4 to 248 °F (-20 to +120 °C) — Working pressure range: -14 to 218 psi (-0.95 to 15 bar) — Not designed for steady motion of the tube
Request for a quoteEISELE GMBH
Germany
— Material Al natural anodized, brass nickel-plated — Sealing FPM — Plug connectors Series 15 (release ring) — without shut-off — Can be assembled as bulkhead — Temperature range -20 to +120 °C (-4 to 248 °F) — Working pressure range -0.95 to 16 bar (-14 to 232 psi) — for compressed air
Request for a quoteEISELE GMBH
Germany
— Whitworth pipe thread DIN ISO 228 — Chambered O-ring — Seals FPM — Material with media contact: Brass, dezincification resistant — Material without media contact: Brass — Temperature range: -4 to 248 °F (-20 to +120 °C) — Working pressure range: -14 to 218 psi (-0.95 to 15 bar) — Not designed for steady motion of the tube
Request for a quoteEISELE GMBH
Germany
- Whitworth pipe thread - Chambered O-ring - Sealing NBR - Material brass nickel-plated - Temperature range -4 to 176 °F (-20 to +80 °C) - Working pressure range -14 to 232 psi (-0.95 to 16 bar) - Swiveling - but not designed for steady motion of the tube
Request for a quoteEISELE GMBH
Germany
- Whitworth pipe thread DIN ISO 228 - Chambered O-ring - Seals FKM - Material: AL, seawater-proof - Temperature range: -4 to 248 °F (-20 to +120 °C) - Working pressure range: -14 to 232 psi (-0.95 to 16 bar)
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
HS UMFORMTECHNIK GMBH
Germany
The advantages to you: no more deformation of roundness when cutting bends on site easier extension-pipe/tiered pipe bend construction appealing visually pickled surface All of our pipes and pipe bends (both unannealed and annealed) are made of the following material: stainless steel pipe, material no. 1.4301 (AISI 304) longitudinal seam welded pipes hot rolled & cold rolled coils, unannealed, with or without pickling (W1) Make: IltaInox and/or Marcegaglia
Request for a quoteCIC - KLAUS CZERWONKA
Germany
The pneumatically operated directional valves VK are robust, reliable and can be installed in a variety of ways. Installation in-line, on the wall, on modules, as a battery or directly on cylinders is possible without any problems. Available sizes between 1/8, 1/4 and 1/2 in 3/2, 5/2 and 5/3.
Request for a quoteBLICKLE RÄDER+ROLLEN GMBH U. CO. KG
Germany
Swivel and fixed castors with pneumatic rubber tyres are used for maximum floor surface preservation. The pneumatic rubber tyres are available with zig-zag or ribbed profile and can be used indoors and outdoors.
Request for a quoteGEMÜ GEBRÜDER MÜLLER APPARATEBAU GMBH & CO. KG
Germany
The GEMÜ Q40 2/2-way pinch valve has a stainless steel piston actuator and is pneumatically operated. The valve guides a tube which is compressed from above by a compressor to control and regulate media. The compressor's specially developed contour and the inserts' contour minimise the strain on the tube and thus increase the tubes' service life. Tubes can be safely inserted and removed in simple steps and without tools. The available control functions are "normally closed (NC)" and "normally open (NO)". An integral optical position indicator is standard
Request for a quoteKENDRION (VILLINGEN) GMBH
Germany
The Airflex® product line is comprised of a complete range of clutches and brakes designed for industrial applications. First manufactured in 1938 by Thomas Fawick, Airflex® products are recognized around the world as the Original Fawick® Clutch. Today, Eaton‘s Airflex® product line provides solutions for a wide variety of applications ranging from oil rigs to mining shovels to grinding mills to tugboats. Whether your application requires a standard product or a custom solution, the Eaton team is available to assist with all of your product needs. To learn more about how Airflex® products can meet your application requirements, get in contact with Kendrion Industrial Drive Systems.
Request for a quoteRIEGLER & CO.KG
Germany
Our product range includes spiral hoses, PA / PUR / PE hoses, PVC hoses with and without fibre, soft PVC hoses, fibre reinforced PUR hoses and PTFE hoses. Furthermore we offer anti-static hoses, spark erosion protected PU hoses, compressed air hoses, autogenous hoses, suction and pressure hoses and hoses especially for use with water. The assortment is rounded out by hose rupture valves, hose winders and cable winders, hose terminal blocks, hose cutters and hose holders. For every intended use we have the right material and the matching hose size.
Request for a quoteRIEGLER & CO.KG
Germany
Our assortment of threaded screw fittings ranges from connectors, double threaded nipples, counter nuts and bushings to reducing nipples, pipe double nipples, hose sleeves and pivoting bushings and up to bulkhead fittings, union nuts, extension pieces, end caps and locking screws. We also offer various fittings made of steel and malleable cast iron as well as assortment boxes with a chosen selection of screw fittings.
Request for a quoteRIEGLER & CO.KG
Germany
Pressure gauge and thermometer are suitable for the various pressure and temperature measurement applications. We offer solutions for gas and liquid measurements. The range covers capsule, plate or Bourdon-tube pressure gauges and measuring instruments made from various materials with versions extending from standard models to stainless steel versions, for use in corrosive environments, and electronics measuring equipment.
Request for a quoteRIEGLER & CO.KG
Germany
Valves and shut-off devices are components for blocking and control of liquids or gases. The range of products includes 2-way ball valves, 3-way ball valves, hydraulic ball valves, angle seat valves, butterfly valves as well as solenoid valves, pressure switches, blocking valves, needle valves and gate valves. Coaxial valves and check valves also belong in the assortments as well as dirt strainers, safety valves and pressure limiting valves.
Request for a quoteRIEGLER & CO.KG
Germany
Quick-connect couplings consist of two components – coupling socket and plug. They are the ideal interface to connect or disconnect the flow of gaseous or liquid media in lines safely and quickly. Quick-connect couplings are used for the conveyance of air, water, oil, acids or various gases. Here you will find single-sided and double-sided blocking quick connect couplings up to I.D. 19, asymmetrical couplings in different sizes and hydraulic couplings standardised to ISO. Our safety couplings are available in swivel, rotating and push button design and in combination with sliding valve and quick connect coupling. RIEGLER couplings are available with a flow of up to 8700 l/min and in EURO, ARO210 and ISO 6150 C plug profiles. The range of materials goes from bright and nickel-plated brass to different variants of stainless steel up to aluminium, plastic, steel and zinc die casting.
Request for a quoteRIEGLER & CO.KG
Germany
Distributors are components for separating or joining together liquids or gases. We offer various distributors, distributor strips, distributor pieces with several outputs and distributor sockets.
Request for a quoteRIEGLER & CO.KG
Germany
Quick-connect couplings consist of two components – coupling socket and plug. They are the ideal interface to connect or disconnect the flow of gaseous or liquid media in lines safely and quickly. Quick-connect couplings are used for the conveyance of air, water, oil, acids or various gases. Here you will find single-sided and double-sided blocking quick connect couplings up to I.D. 19, asymmetrical couplings in different sizes and hydraulic couplings standardised to ISO. Our safety couplings are available in swivel, rotating and push button design and in combination with sliding valve and quick connect coupling. RIEGLER couplings are available with a flow of up to 8700 l/min and in EURO, ARO210 and ISO 6150 C plug profiles. The range of materials goes from bright and nickel-plated brass to different variants of stainless steel up to aluminium, plastic, steel and zinc die casting.
Request for a quoteResults for
Pneumatic - Import exportNumber of results
433 ProductsCompany type
Category