• europages
  • >
  • COMPANIES - SUPPLIERS - SERVICE PROVIDERS
  • >
  • pneumatic

Results for

Pneumatic - Import export

Switzerland

Verified by Europages

It is an autonomous device thanks to its battery power supply and with its supplied equipment it is also a versatile load lifter for construction site or workshop.

Request for a quote

Turkey

Verified by Europages

Pneumatic Cyclone Group is a system that moves the spilled product with air flow. The transportation process is carried out in pipes and the transported materials are sent to the Pneumatic Cyclone. Cyclones are made of sheet steel construction. It has a cylindrical-conical body and consists of an inlet and outlet pipe. It is designed to keep the air loss of the system to a minimum during the separation of air and product in the pneumatic system.

Request for a quote

Germany

Verified by Europages

Pneumatic standard cylinder according to DIN / ISO 6432. Available in diameters between 8 and 25 mm. Standard version in single / double-acting, with magnetic piston and adjustable cushioning. A complete range of accessories for mounting and position sensing is available.

Request for a quote

Germany

Verified by Europages

Miniature indicator with pressure connection M5 for visual indication of pressure.

Request for a quote

Germany

Verified by Europages

Miniature indicator with pressure connection M5 for visual indication of pressure.

Request for a quote

Germany

Verified by Europages

Indicator with pressure connection M5 for visual indication of pressure.

Request for a quote

Germany

Verified by Europages

Indicator with pressure connection M5 for visual indication of pressure.

Request for a quote

Germany

Verified by Europages

Pneumatic timers are used for the precise time control of pneumatic signals in pneumatic circuits or systems. The pressure-independent function of time delay starts when pressure is applied to the control port. After the pre-selected time is elapsed, an internal 3/2 way valve is switched. The pneumatic timer is reset to the initial condition if the control port is vented for at least 300 ms. The adjustable time delay depends on the chosen version and amounts between 0.5 and 180 s. Due to its design the control pressure level must not be below working pressure level. As a result of the fire-risk evaluation according to EN 13463-1, the pneumatic timers are not subject to ATEX regulations. This means they may also be used in explosion hazardous areas as defined in IIG/ IID.

Request for a quote

Germany

Verified by Europages

The new generation of our pneumatic cylinders according to ISO 15552. Light and robust thanks to innovative design and high-quality materials. An aluminum piston with wear protection, reinforced bronze guides and our MF5 multifunction system with improved damping, centering and sealing ensure maximum reliability even under extreme conditions.

Request for a quote

Germany

Verified by Europages

Germany

Verified by Europages

Pneumatically and electrically operated valves with connection pattern according to NAMUR. High quality aluminum construction. Available in 1/4 and 3/2 and 5/2 sizes.

Request for a quote

Germany

Verified by Europages

Sensors and proximity switches for pneumatic cylinders according to ISO 6432 and ISO 15552.

Request for a quote

Germany

Verified by Europages

Fastening elements, bearings and add-on elements for pneumatic cylinders according to ISO 6432 and ISO 15552.

Request for a quote

Germany

Verified by Europages

Our new generation of particularly robust pneumatic cylinders with tie rods.

Request for a quote

Turkey

Verified by Europages

Turkey

Verified by Europages

Netherlands

Verified by Europages

More information coming soon

Request for a quote

Do you sell or make similar products?

Sign up to europages and have your products listed

Add my business

Turkey

Verified by Europages

Germany

Verified by Europages

The GEMÜ 650 2/2-way diaphragm valve has a stainless steel piston actuator and is pneumatically operated. The valve is designed for use in a sterile environment. All metallic actuator components are made of stainless steel. The compression springs of diaphragm sizes 80 and 100 are made of epoxy coated spring steel. Normally closed (NC), Normally open (NO) and Double acting (DA) control functions are available. An integral optical position indicator is standard. —Hermetic separation between medium and operator —Suitable for inert and corrosive liquid and gaseous media —CIP/SIP cleaning and sterilising capabilities —Autoclave capability —Optional flow direction and installation position

Request for a quote

Germany

Verified by Europages

The GEMÜ R690 2/2-way diaphragm valve has a low maintenance membrane actuator and is pneumatically operated. Normally Closed (NC), Normally Open (NO) and Double Acting (DA) control functions are available. The High-Flow valve body provides compact dimensions at high flow rates. —Same mounting height planes over multiple nominal sizes —Compact plant design due to flow optimised valve bodies —Reduced control air consumption —Varied optional accessories for measurement and control

Request for a quote

Germany

Verified by Europages

Simple operation, robust design and precise cuts make the metal-cutting cold saws of the VMS series a reliable partner in the workshop and factory. They are real all-rounders when it comes to cutting solid materials, tubes and profiles. In addition to the automatic saw feed, the VMS 350 PV also offers pneumatic clamping of the material. The heart of the VMS circular saw unit is the worm gear unit with EISELE shock-absorbing feature, produced in-house. It is heavy duty and provides for a smooth, low-vibration running of the saw, which, of course, has a positive impact on the quality of the cutting surface, the blade life and the service life of the saw. A quick change of the saw blade is easily possible thanks to the large safety hood. The hydro-pneumatic saw feed can be adjusted infinitely.

Request for a quote

Germany

- One interface for compressed air, gases, fluids, vacuum, electrical and electronic signals - Maximum modularity due to freely configurable connections - Integrated coding in the housings prevents incorrect connections - Easy, tool-free mounting and dismounting - Locking lever reduces the force needed for assembly - Machine set-up times are reduced - Fits to Eisele adaptive inserts - Coupling and slotted nut material: Chemical nickel-plated aluminum - Lever materials: anodized aluminum / 1.4301 (304) stainless steel - Other materials: 1.4404 (316L) stainless steel / A2 / POM - Knurled screw with retaining cable

Request for a quote

Germany

- Whitworth pipe thread- Chambered O-ring - Seals NBR - Material brass nickel-plated - Temperature range -4 to 176 °F (-20 to +80 °C) - Working pressure range -14 to 232 psi (-0.95 to 16 bar) - Swiveling, not designed for steady motion of the tube - Not designed for steady motion of the tube

Request for a quote

Germany

— Whitworth pipe thread DIN ISO 228- Chambered O-ring — Seals FPM — Material with media contact: Brass, dezincification resistant — Material without media contact: Brass — Temperature range: -4 to 248 °F (-20 to +120 °C) — Working pressure range: -14 to 218 psi (-0.95 to 15 bar) — Not designed for steady motion of the tube

Request for a quote

Germany

— Material Al natural anodized, brass nickel-plated — Sealing FPM — Plug connectors Series 15 (release ring) — without shut-off — Can be assembled as bulkhead — Temperature range -20 to +120 °C (-4 to 248 °F) — Working pressure range -0.95 to 16 bar (-14 to 232 psi) — for compressed air

Request for a quote

Germany

— Whitworth pipe thread DIN ISO 228 — Chambered O-ring — Seals FPM — Material with media contact: Brass, dezincification resistant — Material without media contact: Brass — Temperature range: -4 to 248 °F (-20 to +120 °C) — Working pressure range: -14 to 218 psi (-0.95 to 15 bar) — Not designed for steady motion of the tube

Request for a quote

Germany

- Whitworth pipe thread - Chambered O-ring - Sealing NBR - Material brass nickel-plated - Temperature range -4 to 176 °F (-20 to +80 °C) - Working pressure range -14 to 232 psi (-0.95 to 16 bar) - Swiveling - but not designed for steady motion of the tube

Request for a quote

Germany

- Whitworth pipe thread DIN ISO 228 - Chambered O-ring - Seals FKM - Material: AL, seawater-proof - Temperature range: -4 to 248 °F (-20 to +120 °C) - Working pressure range: -14 to 232 psi (-0.95 to 16 bar)

Request for a quote

Germany

- One interface for compressed air, gases, liquids, electrical and electronic signals - Fits to Eisele Adaptive insets - Can be assembled as bulkhead - Material Al nickel-plated or stainless steel - Temperature range -20 to +120 °C - Working pressure range -0,8 to 0 bar or 0 to 24 - Up to max. 14 connections

Request for a quote

Request for quotes

Create one request and get multiple quotes form verified suppliers.

  • Only relevant suppliers
  • Data privacy compliant
  • 100% free