Valve bodies - Import export

These are the parts used in gas detector.

The cartridge valves are available in a nominal width of 10 to 15 mm. Depending on the pressure difference, drives with one, two, or three pistons are required. The tedious dismantling of the entire valve body from the pipeline using a large wrench is no longer necessary; only the three screws have to be loosened. Another advantage is the consistently small valve diameter, even at the highest system pressures. The drives have small diameters and are arranged in tandem, one behind the other. This means that these valves can be installed next to each other to save space, even in extremely confined spaces. A version with a hose seal is available for heavily soiled or sticky media.

Pneumatically operated globe valve type 7027 with integrated positioner for control applications with neutral to highly aggressive media. The straight design enables a highly efficient and very simple insulation of the valve body as well as the welded-on pipeline.

Flanged valve with stainless steel body for normal and aggressive media. Installation length and flange pattern according to DIN and ANSI.Flanges acc. to DIN EN 10921 Length acc. to DIN EN 5581 series 1 Limit switch Pilot valve Manual override . . . Piston actuator of Brass (chrome plated) Stainless steel Polymer Stainless steel diaphragm actuator Low temperature version Pressure balanced version Degreased version, Silicon or PTFEfree version …

The flanged valve with pneumatic actuator and body made of gray cast iron or spheroidal graphite iron in installation length and flange pattern according to DIN. Limit switch Pilot valve Manual override version with pressure relief

Each float valve is usually opened and closed mechanically by a float body according to the filling level in a container. We supply various float bodies for our valve series, which allow many application configurations depending on the design and size. Copper float with soldered-on suspension bearing and fixing screw suitable for use above 70° C.

without PURE version with FPM-seal This very compact pump is an interesting alternative when containers are stored above each other. In these cases an access from above is not possble, but the bottom drain of the IBC can be used. For this purpose the horizontal Lutz B200 is directly connected tot he bottom outlet valve. Liquid examples: Thin-bodied mineral oil products, emulsions, solvents, aqueous solutions, alkalis and acids, vegetable oils, cleansing- and cosmetic care products, disinfectants Features: Centrifugal pump with axial impeller in compact design Directly connected to the bottom outlet valve of the IBC with standard union nut (S60 x 6) Variable drive concept (different universal- and air-driven motors) Explosion proof versions for applications in Ex-areas (zone 1 and 2), including check valve Significantly better hydraulic capacity in comparison to hydrostatic outlet Benefits: Small space requirement Easy disassembly, two-piece pump with clamp connections acc. to...

KB Schmiedetechnik GmbH is a drop forge in West Germany, located between the historic “blade & metal region” Solingen-Remscheid-Wuppertal and the “Borussia soccer city” Dortmund, specialized in small series production of safety-relevant closed die forgings from 200g to 130Kg unit weight of all steel grades and alloys according to following certifications and standards: pressure equipment: valves, boiler systems, piping PED 97/23/EG, AD 2000-W0, ASME/ASTM, CNIM, Alstom, MHPS nuclear power/ atomic energy and plant construction KTA3201.1, KTA1401, AVS D 100/50, Siemens, EDF/Areva/RCC-M naval architecture/ shipbuilding and offshore/ ocean engineering, certified by •American Bureau of Shipping (ABS) •Bureau Veritas (BV) •Det Norske Veritas (DNV) •Lloyds Register (LR) •Nippon KaijiKyōkai (ClassNK) Examples: components and equipment like brackets, holders, chain links, hoists, lifting hooks, fasteners, pressure-bearing parts like valve bodies, pipe connections, and more.

The GEMÜ SUMONDO® single-use diaphragm valve consists of a diaphragm valve body and a manual or pneumatic operator. The single-use diaphragm valve body has an internally welded diaphragm. The single-use diaphragm valve body is fastened to the operator using a clamp. The valve body and the operator are locked using a defined closing and opening procedure. After use, the single-use diaphragm valve body and its diaphragm can be removed from the operator and disposed of. The operator can be used multiple times and remains in the plant. — Tried and tested actuator design — Impact resistant, corrosion resistant — The diaphragm valve body meets the purity requirements of the pharmaceutical industry (USP 85, USP 788) — Integral optical position indicator — Validation Guide on request — Gamma-sterilizable valve body

The GEMÜ 566 2/2-way globe control valve has a body with an integrated control mechanism which can be controlled by various operator types. In addition to a pneumatic version, manual and motorized versions are also available. The GEMÜ 566 valve was specially developed for the control of small quantities and enables flow rates from 63l/h to 2500 l/h. —Control of liquid media from 63 l/h to 2500 l/h —Linear or equal-percentage control characteristic options —Three operator types selectable (manual, pneumatic, motorised)

The GEMÜ 52 directly controlled 2/2-way solenoid valve has a completely plastic encapsulated coil. The armature is sealed by a bellows made of PTFE backed by an additional safety diaphragm. The valve body is available in various materials and with a straight through or angle valve body design. —Good cleanability —The solenoid can be replaced without removing the valve body from the pipeline —Hermetic separation between medium and operator

The GEMÜ 202 directly controlled 2/2-way solenoid valve has a completely plastic encapsulated coil. The armature is sealed by a bellows made of PTFE backed by an additional safety diaphragm. The valve body is available in various materials and with a straight through or angle valve body design. Good cleanability The solenoid can be replaced without removing the valve body from the piping Hermetic separation between medium and actuator Connection types: Solvent cement socket \ Threaded connection Connection standards: DIN \ ISO Body materials: PVC-U, grey \ PVDF Conformities: EAC \ UL

The GEMÜ R677 2/2-way diaphragm valve has a low maintenance plastic bonnet and is manually operated. An integral optical position indicator is standard. The High-Flow valve body provides compact dimensions at high flow rates. -Same mounting height planes over multiple nominal sizes -Compact plant design due to flow optimised valve bodies -Integral optical position indicator

The GEMÜ R690 2/2-way diaphragm valve has a low maintenance membrane actuator and is pneumatically operated. Normally Closed (NC), Normally Open (NO) and Double Acting (DA) control functions are available. The High-Flow valve body provides compact dimensions at high flow rates. —Same mounting height planes over multiple nominal sizes —Compact plant design due to flow optimised valve bodies —Reduced control air consumption —Varied optional accessories for measurement and control

The GEMÜ 601, GEMÜ 612 and GEMÜ 673 2/2-way diaphragm valves have a temperature resistant plastic handwheel and are manually operated. The GEMÜ 602 valve has a stainless steel handwheel and is manually operated. Bonnet and internals are made all of stainless steel. A seal adjuster to increase service life of the diaphragm and an integral optical position indicator are included as standard. —Hermetic separation between medium and operator —Optional flow direction and installation position —Long service life of the diaphragm due to patented seal adjuster (US-Pat. 5 377 956) —Valve body also available in multi-port designs (M-block and T-body) or as tank bottom valve body

The GEMÜ C50 iComLine ultra pure 2/2-way plastic diaphragm globe valve has a pneumatic actuator. All medium wetted parts are made of PTFE. The external operator parts are made of PVDF. An integral optical position indicator is standard. In addition to 2/2-way valve bodies customised multi-port valve block solutions can be produced. —Low space requirement due to compact design —Ideally suited for corrosive media —High purity due to cleanroom manufacturing —Manifolds are a space-saving design solution

The GEMÜ 610 2/2-way diaphragm valve has a low maintenance plastic piston actuator and is pneumatically operated. An integral optical position indicator is standard. Normally Closed (NC), Normally Open (NO) and Double Acting (DA) control functions are available. —Same mounting height planes over multiple nominal sizes —Compact plant design due to flow optimised valve bodies —Integral optical position indicator and seal adjuster as standard —Option with electrical position indicator and / or lock out device

The modular GEMÜ 553 distribution valve comprises various globe valve modules. These can be equipped with manual or pneumatic operators. The downstream media is isolated using a PTFE seal. The valve spindle is sealed by a self-adjusting gland packing. This provides a low-maintenance and reliable valve spindle seal even after an extended period of operation. The wiper ring that is installed upstream of the gland packing also protects this against contamination and damage. The individual modules can be easily connected using screws. The seal on the connection flange and between the individual valve bodies has an FPM O-ring. Features: — Modular valve for distribution, mixing and collection applications — Freely extendable — Simple adaptation options — Diverse accessories — Simple integration of sensors — Outlets can be arranged in 90° steps — Compact design — Actuators can be easily replaced — Filters or separation of media can be easily integrated

The GEMÜ N082, N182 and N782 pressure reducers ensure that a constant outlet pressure is maintained in process plant utilizing the pressure differential.If the pressure rises on the outlet side, the spring force is lower and the valve closes as the spring is raised. The pressure is reduced until the spring force and the outlet pressure are the same. If the pressure falls, the valve opens as the spring force presses against the diaphragm surface via the control aperture. The outlet pressure can be read off a diaphragm-protected pressure gauge (not available for N782) and the spring force adjusted using a set screw as required. - The working pressure can be very easily adjusted using a set screw and secured with the integrated lock nut. If required, the setting that has been made can be lead sealed - The flow-efficient design of the valve body ensures good flow rate values - Control errors are kept to a minimum due to the large control face and the spiral spring

The GEMÜ 507 2/2-way angle seat globe valve has an ergonomically designed plastic handwheel and is manually operated. The valve spindle is sealed by a self-adjusting gland packing providing low maintenance and reliable valve spindle sealing even after a long service life. A wiper ring fitted in front of the gland packing protects the seal against contamination and damage. A stainless steel bellows and a handwheel extension are available as options (not for operator size 0). —Various valve body connections (threaded sockets, threaded spigots, butt weld spigots) available —High flow rates due to angle seat design —Optionally for contact with foodstuffs as per directive (EC) No. 1935/20041 (K-no. 1935)

The GEMÜ 530 2/2-way globe valve has a rugged low maintenance stainless steel piston actuator and is pneumatically operated. The valve spindle is sealed by a self-adjusting gland packing providing low maintenance and reliable valve spindle sealing even after a long service life. A wiper ring fitted in front of the gland packing protects the seal against contamination and damage. — Suitable for inert, corrosive, liquid and gaseous media — Easily cleanable — Actuator and valve body are free from non-ferrous metals — High flow rates and compact design — ATEX version available as an option

Block Body Ball Valves with Threaded Connections CBV3 ▪ Compact three-way high-pressure block body ball valves designed for use as three-way selectors (L-bore, 90° operation) for hydraulic applications ▪ Compact diverter style ▪ Pressure inlet possible from center port only ▪ With female BSP, NPT, UN/UNF thread or 24° cone connection ▪ Pressure range: up to 500 bar / 7250 PSI (depending on size and material combination of the ball valve) Block Body Ball Valves with Threaded Connections CBVS3 ▪ Compact three-way high-pressure block body ball valves designed for use as three-way selectors (L-bore, 90° operation) for hydraulic applications ▪ Compact diverter style ▪ Pressure inlet possible from all ports ▪ With female BSP, NPT, UN/UNF thread or 24° cone connection ▪ Pressure range: up to 500 bar / 7250 PSI (depending on size and material combination of the ball valve) Block Body Ball Valves with Threaded Connections LBV3 ▪ Three-way high-pressure block body ball valves designed...

Block Body Ball Valves with Threaded Connections BBV2 ▪ Two-way high-pressure block body ball valves designed for use as on/off devices for hydraulic applications ▪ with female BSP, NPT or UN/UNF thread, male ORFS connection or 24° cone connection ▪ Pressure range: up to 500 bar / 7250 PSI (depending on size and material combination of the ball valve) Forged Body Ball Valves with Threaded Connections BBV2 ▪ Two-way high-pressure forged body ball valves designed for use as on/off devices for hydraulic applications ▪ with female BSP, NPT or UN/UNF thread, male ORFS connection or 24° cone connection ▪ Pressure range: up to 420 bar / 6000 PSI (depending on size and material combination of the ball valve) Block Body Ball Valves with Threaded Connections HBV2 ▪ Two-way high-pressure block body ball valves designed for use as on/off devices for hydraulic applications ▪ with female NPT or 24° cone connection ▪ Pressure range: up to 800 bar / 12000 PSI (depending on size and material...

Block Body Ball Valves with Threaded Connections TBV4 ▪ Four-way high-pressure block body ball valves designed for use as three-way selectors (T-bore, 90° operation) for hydraulic applications ▪ Multi-way valve with trunnion-style ball ▪ With female BSP, NPT, UN/UNF thread or 24° cone connection ▪ Pressure range: up to 500 bar / 7250 PSI (depending on size and material combination of the ball valve) Block Body Ball Valves with Threaded Connections XBV4 ▪ Four-way high-pressure block body ball valves designed for use as three-way selectors (double L-bore, 90° operation) for hydraulic applications ▪ Multi-way valve with trunnion-style ball ▪ With female BSP, NPT, UN/UNF thread or 24° cone connection ▪ Pressure range: up to 500 bar / 7250 PSI (depending on size and material combination of the ball valve)

Block-Body Ball Valves for Manifold Mounting BBV35 ▪ Three-way high-pressure block body ball valves designed for use as three-way selectors (L-bore, 90° operation) for hydraulic applications ▪ Block body design for manifold mounting with either 4 or 6 mounting holes for added safety; improved manifold design eliminates external piping and connectors ▪ Pressure inlet possible from center port only ▪ Pressure range: up to 500 bar / 7250 PSI (depending on size and material combination of the ball valve) Block-Body Ball Valves for Manifold Mounting BBVS35 ▪ Three-way high-pressure block body ball valves designed for use as three-way selectors (L-bore, 90° operation) for hydraulic applications ▪ Block body design for manifold mounting with either 4 or 6 mounting holes for added safety; improved manifold design eliminates external piping and connectors ▪ Pressure inlet possible from all ports ▪ Pressure range: up to 500 bar / 7250 PSI (depending on size and material combination of...

Block-Body Ball Valves for Manifold Mounting BBV25 ▪ Two-way high-pressure block body ball valves designed for use as on/off devices for hydraulic applications ▪ Block body design for manifold mounting with either 4 or 6 mounting holes for added safety; improved manifold design eliminates external piping and connectors ▪ Pressure range: up to 500 bar / 7250 PSI (depending on size and material combination of the ball valve)

Round Body Ball Valves with ISO Flange Connections BBV2D1/BBV2D2 ▪ Two-way high-pressure round body ball valves designed for use as on/off devices for hydraulic applications ▪ For direct ISO flange connection according to ISO 6164 ▪ Pressure range: up to 400 bar / 5800 PSI (depending on size and material combination of the ball valve) Please note: The final maximum working pressure is determined by flange and pipe/tubing rating.

Block Body Ball Valves with SAE Flange Connections BBV2E/BBV2S ▪ Two-way high-pressure block body ball valves designed for use as on/off devices for hydraulic applications ▪ With standard and extended SAE mating flange connectors according to ISO 6162-1/2 and SAE J 518 C ▪ Pressure range: up to 420 bar / 6000 PSI (depending on size and material combination of the ball valve) Please note: The final maximum working pressure is determined by flange and pipe/tubing rating. Forged Body Ball Valves with SAE Flange Connection FBV 2E/ FBV 2S ▪ Two-way high-pressure forged body ball valves designed for use as on/off devices for hydraulic applications ▪ With standard and extended SAE mating flange connectors according to ISO 6162-1/2 and SAE J 518 C ▪ Pressure range: up to 420 bar / 6000 PSI (depending on size and material combination of the ball valve) Please note: The final maximum working pressure is determined by flange and pipe/tubing rating. Round Body Ball Valves with SAE Flange...