• Europages
  • >
  • COMPANIES - SUPPLIERS - SERVICE PROVIDERS
  • >
  • heating- industrial - installations and equipment

Results for

Heating- industrial - installations and equipment - Import export

Germany

Verified by Europages badge

ThermSys offers mineral insulated thermocouples of types J, K, N, D, E, S, R, B and C in diameter ranges from 0.25 mm to 3 mm with standard sheath material 2.4816 (Inconel600) and AISI 321. On customer request other sheath materials (e.g. Hastelloy, Haynes alloys, platinum / rhodium) available. For questions regarding use and properties such as response time, optimal fixation, etc. please contact us! ThermSys offers a series of standard thermocouples and custom design . Almost every special sheath material, length, plug connections, compensating cable length, etc. can be realized. Customized thermocouple applications, such as level sensors, drag elements, vacuum compatible thermal signal feedthroughs can be done. Thermocouples lasered or hard soldered in flanges (KF / CF / etc) are available in customized versions.

Germany

Verified by Europages badge

Due to the superior features mineral insulated heaters are used in a wide range of industrial heating applications. ThermSys provide as standard a range of mineral insulated heaters (MI-heater) with outside diameter 0,5mm up to 6,5mm with stainless steel sheath (e.g. AISI 304, AISI 304L, AISI 316L, AISI 321, AISI 316Ti) until 700°C or Inconel 600 sheath (2.4816) until 1000°C. Special alloys like AISI 310S, Inconel 625, Inconel 800 or others can be offered on request.

Germany

Verified by Europages badge

Due to the superior features mineral insulated heaters are used in a wide range of industrial heating applications. ThermSys provide as standard a range of mineral insulated heaters (MI-heater) with outside diameter 0,5mm up to 6,5mm with stainless steel sheath (e.g. AISI 304, AISI 304L, AISI 316L, AISI 321, AISI 316Ti) until 700°C or Inconel 600 sheath (2.4816) until 1000°C. Special alloys like AISI 310S, Inconel 625, Inconel 800 or others can be offered on request.

Germany

Verified by Europages badge

Due to the superior features mineral insulated heaters are used in a wide range of industrial heating applications. ThermSys provide as standard a range of mineral insulated heaters (MI-heater) with outside diameter 0,5mm up to 6,5mm with stainless steel sheath (e.g. AISI 304, AISI 304L, AISI 316L, AISI 321, AISI 316Ti) until 700°C or Inconel 600 sheath (2.4816) until 1000°C. Special alloys like AISI 310S, Inconel 625, Inconel 800 or others can be offered on request.

Germany

Verified by Europages badge

Due to the superior features mineral insulated heaters are used in a wide range of industrial heating applications. ThermSys provide as standard a range of mineral insulated heaters (MI-heater) with outside diameter 0,5mm up to 6,5mm with stainless steel sheath (e.g. AISI 304, AISI 304L, AISI 316L, AISI 321, AISI 316Ti) until 700°C or Inconel 600 sheath (2.4816) until 1000°C. Special alloys like AISI 310S, Inconel 625, Inconel 800 or others can be offered on request.

Germany

Verified by Europages badge

Due to the superior features mineral insulated heaters are used in a wide range of industrial heating applications. ThermSys provide as standard a range of mineral insulated heaters (MI-heater) with outside diameter 0,5mm up to 6,5mm with stainless steel sheath (e.g. AISI 304, AISI 304L, AISI 316L, AISI 321, AISI 316Ti) until 700°C or Inconel 600 sheath (2.4816) until 1000°C. Special alloys like AISI 310S, Inconel 625, Inconel 800 or others can be offered on request.

Germany

Verified by Europages badge

Due to the superior features mineral insulated heaters are used in a wide range of industrial heating applications. ThermSys provide as standard a range of mineral insulated heaters (MI-heater) with outside diameter 0,5mm up to 6,5mm with stainless steel sheath (e.g. AISI 304, AISI 304L, AISI 316L, AISI 321, AISI 316Ti) until 700°C or Inconel 600 sheath (2.4816) until 1000°C. Special alloys like AISI 310S, Inconel 625, Inconel 800 or others can be offered on request.

Germany

Verified by Europages badge

Due to the superior features mineral insulated heaters are used in a wide range of industrial heating applications. ThermSys provide as standard a range of mineral insulated heaters (MI-heater) with outside diameter 0,5mm up to 6,5mm with stainless steel sheath (e.g. AISI 304, AISI 304L, AISI 316L, AISI 321, AISI 316Ti) until 700°C or Inconel 600 sheath (2.4816) until 1000°C. Special alloys like AISI 310S, Inconel 625, Inconel 800 or others can be offered on request.

Germany

Verified by Europages badge

Due to the superior features mineral insulated heaters are used in a wide range of industrial heating applications. ThermSys provide as standard a range of mineral insulated heaters (MI-heater) with outside diameter 0,5mm up to 6,5mm with stainless steel sheath (e.g. AISI 304, AISI 304L, AISI 316L, AISI 321, AISI 316Ti) until 700°C or Inconel 600 sheath (2.4816) until 1000°C. Special alloys like AISI 310S, Inconel 625, Inconel 800 or others can be offered on request.

Germany

Verified by Europages badge

Due to the superior features mineral insulated heaters are used in a wide range of industrial heating applications. ThermSys provide as standard a range of mineral insulated heaters (MI-heater) with outside diameter 0,5mm up to 6,5mm with stainless steel sheath (e.g. AISI 304, AISI 304L, AISI 316L, AISI 321, AISI 316Ti) until 700°C or Inconel 600 sheath (2.4816) until 1000°C. Special alloys like AISI 310S, Inconel 625, Inconel 800 or others can be offered on request.

Germany

Verified by Europages badge

Using our wide range of heaters we manufacture for different markets according your specifications. Due to the small bending radius of the heaters and the various heater diameters, materials and mounting options, we integrate the heater directly at the heated spot. Marking your parts, tests, cleaning and packing can be done according to your specifications.

Germany

Verified by Europages badge

Using our wide range of heaters we produce for various applications furnaces and vaporizers according to your specifications. Marking your parts, tests, cleaning and packing can be done according to your specifications

Germany

Verified by Europages badge

Using our wide range of heaters we produce any sizes and shapes of heating seals and bars. Due to the small bending radius of the heaters and the various materials and mounting options, we integrate the heater directly at the heated spot. This gives you fast heat up times with minimum power consumption and increased efficiency.

Germany

Verified by Europages badge

Aramid fibers are suitable for very demanding applications and they are widely used in the firefighting industry (manufacturing of firefighters’ clothing) because of their flame retardant properties. Aramid is not only fireproof, the aramid fibers also have a high tensile strength, which is why they are often used for bulletproof vests (military and police) or for armoring selected emergency vehicles. A special property of aramid nonwovens is its good thermal insulation. The laid heating wire creates a very high heat output, which is insulated by the nonwoven. Aramid has a high heat resistance, which is an enormous advantage since laying the heating wire generates a very high heat output which is further enhanced by the insulation provided by the aramid nonwoven carrier. In addition, the nonwoven is either not combustible or flame retardant and can be used for a temperature ranges of up to 200°C.

Germany

Verified by Europages badge

The Uni Condens 8000 F stainless steel condensing boiler is the ideal solution for heating applications between 50 and 115 kW. The boiler can run either on gas or on low-sulphur heating oil. Installation is easy as the boiler is compact, takes up minimum space and weights relatively little. Intelligent water flow using separate return connections provides the ideal conditions for optimum condensation and thus high standard utilisation ratios. When running on oil, the Uni Condens is capable of a standard utilisation ratio of up to 104%. Up to 110% is even possible when running on gas. The Uni Condens has an effective condensate heat recovery surface with special profiling of the tubes, so that the maximum utilisation of the condensation potential is achieved. The construction with burnout combustion chamber ensures that there is clean combustion and low emissions. The two return flow sockets guarantee optimum separation into high-temperature and low-temperature heating circuits.

Germany

Verified by Europages badge

The Uni Condens 8000 F stainless steel condensing boiler is the ideal solution for heating applications between 800 and 1,200 kW. The boiler can run either on gas or on low-sulphur heating oil. Installation is easy as the boiler is compact, takes up minimum space and weights relatively little. Intelligent water flow using separate return connections provides the ideal conditions for optimum condensation and thus high standard utilisation ratios. When running on oil, the Uni Condens is capable of a standard utilisation ratio of up to 104%. Up to 110% is even possible when running on gas. The Uni Condens has an effective condensate heat recovery surface with special profiling of the tubes, so that the maximum utilisation of the condensation potential is achieved. The construction with burnout combustion chamber ensures that there is clean combustion and low emissions. The two return flow sockets guarantee optimum separation into high-temperature and low-temperature heating circuits.

Germany

Verified by Europages badge

The Uni Condens 8000 F stainless steel condensing boiler is the ideal solution for heating applications between 145 and 640 kW. The boiler can run either on gas or on low-sulphur heating oil. Installation is easy as the boiler is compact, takes up minimum space and weights relatively little. Intelligent water flow using separate return connections provides the ideal conditions for optimum condensation and thus high standard utilisation ratios. When running on oil, the Uni Condens is capable of a standard utilisation ratio of up to 104%. Up to 110% is even possible when running on gas. The Uni Condens has an effective condensate heat recovery surface with special profiling of the tubes, so that the maximum utilisation of the condensation potential is achieved. The construction with burnout combustion chamber ensures that there is clean combustion and low emissions. The two return flow sockets guarantee optimum separation into high-temperature and low-temperature heating circuits.

Do you sell or make similar products?

Sign up to EUROPAGES and have your products listed

Add my business

Germany

Verified by Europages badge

InduStrip IHS radiant heaters are suitable for full or auxiliary heating of rooms with large volumes and high ceilings. These radiators can also be used outdoors like on sports stands or loading ramps to keep them dry and frost-free. Robust industrial design, galvanized steel casing, high-gloss aluminum reflectors.

Germany

Verified by Europages badge

Infrared Heaters - Highly efficient infrared-technology. Economical heating, exactly on point, with Schultze Infrared-heaters. Specially designed halogen heating elements emit short-wave infrared and provide instantly noticeable comfort heat, similar to the sun. Heating people directly without the need to build up and maintain a body of warm air is economical and flexible as well, especially for applications like outdoors, with high ceilings or huge spaces. The field of application includes for example work-shops, sport-facilities, pub gardens, patios, but also industrial or commercial appliances like drying paint or heating machinery. The HA-series are IP22 rated for indoor use and provide the most economic means of heating intermittently used buildings. The case includes M6 holes for optional suspension.

Germany

Verified by Europages badge

Screw-in heaters are versatile and intended for heating liquid media in industrial and commercial applications. When selecting, the specific surface load permitted for the respective medium must be observed and checked by the customer. EHK G2 are mainly used for heating hydraulic oil in containers in which the replacement of the heating cartridge without draining the medium must be possible. Ceramic heating cartridge in stainless steel tube ø 50mm, material-no. 1.4512 or material-no. 1.4404. G2″ thread SW70 welded from V2A. Terminal box made of PA6-GF30, impact-resistant and oil-resistant, degree of protection IP66/67. Unheated zone 50mm, surface load 1,5 W/cm², voltage 230/400 V. Special versions on request.

Germany

Verified by Europages badge

Screw-in heaters are versatile and intended for heating liquid media in industrial and commercial applications. When selecting, the specific surface load permitted for the respective medium must be observed and checked by the customer. Screw-in heater G1 1/2″ with soldered tubular heaters are mainly used to heat water and aqueous solutions. 3 tubular heating elements ø 8,5mm made of stainless steel 1.4404 brazed in G1 1/2″ thread SW60. Connection to 230/400 V3 (N), unheated zone 60mm, rotatable stainless steel terminal box. Typically used in washing machines, dishwashers, tempering equipment, laboratory equipment, etc. Type EHK G112-A with built-in thermostat 0-95°C Type EHK G112-AB with built-in thermostat/limiter 30-80°C / 100°C Type EHK G112-U without integrated control unit

Germany

Verified by Europages badge

Infrared Heaters - Highly efficient infrared-technology. Economical heating, exactly on point, with Schultze Infrared-heaters. Specially designed halogen heating elements emit short-wave infrared and provide instantly noticeable comfort heat, similar to the sun. Heating people directly without the need to build up and maintain a body of warm air is economical and flexible as well, especially for applications like outdoors, with high ceilings or huge spaces. The field of application includes for example work-shops, sport-facilities, pub gardens, patios, but also industrial or commercial appliances like drying paint or heating machinery. The HWP2-series is dust- and water-jet tight complying with IP55 rating. HWP2 heaters are a stylish means of providing comfort heat in outdoor or indoor locations

Italy

Verified by Europages badge

New lightweight and handy device with practical handle with additional controls for rapid gas and electronic ignition opening. The high power and ease of use of this device allows fast retraction of thermo plastic films of any thickness and the packaging of large products. FEATURES Structure with double insulation for continuous use without overheating and without risk of burns; Terminal with 360° rotation for use in any position; 8 meter pipe with quick release; Safety valve included (in case of breakage block the gas); Practical carrying case; Noise level 83db.

Italy

Verified by Europages badge

Vulcan is the most powerful unit in the range. The compact construction coupled with the ability to operate continuously, thus allowing the installation in any type of plant.

Italy

Verified by Europages badge

Extraordinarily electrical device suitable to shrink caps and polyethylene film without use of flames. The device is a powerful termoretractor for pallets and allows to obtain a uniform heat shrinkage. It can also be used in very small spaces and is equipped with integrated support foot.

Italy

Verified by Europages badge

The new HOTWIND PREMIUM air heater replaces the very popular HOTWIND "S" and guarantees long life thanks to the new brushless motor with continuous adjustment. The air volume reaches 900 l / min (instead of the 620 l / min of the old model) and the maximum power is 3700/5400 W (depending on the model) by means of a potentiometer for uninterrupted, silent and suitable operation for installation on systems where heating, drying, forming, shrinking, welding, etc. are necessary. The temperature is electronically adjustable from 20 to 650 ° C.

Italy

Verified by Europages badge

The new blower for heating and heatshrinking GHIBLI is a model lightweight and handy able to guarantee a constant temperature regardless of changes in voltage and the ambient temperature. Despite the compact size it is very powerful (2Kw) and is able to heat the air temperature from 20 to 600° in a very short time. The small size and comfortable grip allowing the operator to handle the blower with extreme comfort and precision. The amount of air supplied is adjustable thanks to two selectors.

Italy

Verified by Europages badge

Heater hand toool, with electronic temperature control from 20 to 600 ° C and screw for adjusting the amount of air. The Diode S can be used to weld plastics, train, thermoretracting, dry, heat. The device only heates and must be paired with a blower or connected to the compressed air.

Italy

Verified by Europages badge

The new TRIAC ST/AT is mainly used for welding and plastic materials processing. It's suitable to be used for purposes outside, inside, covers, banners, civil engineering and industrial, flooring, heat shrinking of packaging. The new model differs in manageability, reliability, and balance. The extraordinary component handle provides a perfect grip to the user. The protective tube is equipped with the active cooling system for added security. Air filters can be removed and cleaned in a very simple way, allowing optimal air flow and excellent performance. The model TRIAC ST has adjustable temperature from 40° to 700° C The model TRIAC ST AT is equipped with a digital display and adjustable temperature from 40° to 650° C.