Building - Import export

The proven professionalism of our technical staff and the experience gained over many years in steelwork allows us to also deal with the construction of roofing structures for large buildings. The structures are built at our Sarno site using innovative techniques and are designed according to your specific needs and requirements, with our technical staff providing you with the best possible support during all phases of the service.

PU MEMBRANE 450 is a one component, easy to apply, specially formulated polyurethane based, elastic, crack bridging membrane. It cures to form a highly elastic, seamless, waterproof coating with excellent crack bridging properties. Its performance is maintained even at low temperatures.

Anti-shrinking, anti-carbonate, thixotropic, fibre-reinforced anti-carbonate mortar based on special resistant sulphate cements, in compliance with EN 1504-3 Class R3 or R4-CC, with high mechanical resistance and high adhesive power on steel and concrete. Waterproof and insensitive to chemical attack, resistant to sulphates. It is applied for the recovery of deteriorated concrete and the reinforcement in general of concrete. INTORIS MT is specifically thixotropic for spray or trowel restoration for vertical restoration operations. Available in R3 or R4-CC class. Available type "P" to be used without protective treatment to eliminate the armor stops. FPC 0925 production process certificate.

Liquid elastomeric sheath in aqueous dispersion based on special styrene acrylic elastic resins, for waterproofing of terraces prior to laying of tiles, restoration and maintenance of old bituminous sheaths, protection and Waterproofing of roofing in fibre cement and sheet metal, tiles and Marmette, waterproofing in general of sloping non-walkable surfaces, protection and decoration of bituminous coverings and waterproofing coatings with a bitumen-based polymer, Finishes of metallic structures with protective bituminous background, rough or plastered masonry works, prefabricated in general, etc.

Adhesive and lightweight premixed smoothener with glass balls based on hydraulic binders with high constant quality levels. The gluing and shaving of the insulating panels of polystyrene, polystyrene (also embossed), polyurethane, cork, cement wood inside and outside; The shaving of concrete surfaces, rustic, plastic and/or mineral coatings, traditional or premised plasters based on lime and cement both new and old, even if varnished, provided that in excellent condition, plasters which have lesions of Retraction, it will be made with lightened powder adhesive/wiper with glass beads, based on hydraulic binders type "Intocol PP LIGHT" Malvin S.R.L., applied by hand and kneading with the addition of water, with a consumption of 2/4.5 kg/sqm as glue and 2.5/3 kg/MQ as smoothing, with compression resistance to 28 days of category CS III.

Concentrated latex to be mixed with cementitious mortars to optimize workability, adhesion, flexibility and resistance. To be mixed with cement or cement and sand for the creation of jet shooting Boiacas, low and high thickness mortars, fluid mortars for filling cracks, to be mixed with "Intomasso" to make screed 0.5-3 cm thick and to generally confer Greater plasticity and resistance to cementitious mortars and plaster in general, to improve adhesion characteristics, flexibility and water resistance of adhesives. To be used also as cement clinging with high penetrating power and insulating for external and internal, particularly suitable for the consolidation of inconsistent surfaces or flour; To improve the adhesion of background plasters or mineral coatings on smooth or poorly absorbent surfaces, concretes, weak, inconsistent or floured supports. Suitable for the consolidation of cementitious screets of low consistency.

Light-weight premixed structural concrete, standard UNI EN 206-1 with resistance class LC 20/22 type CLS 1.4; class LC 30/33 type CLS 1.6; class LC 40/44 type CLS 1.8 based on hydraulic binders and hollow spheres of glass, for indoor and outdoor use. To be applied by mechanical projection or by hand for lightened structural concretes in general. It does not corrode metals but protects them if wrapped completely. To be used for internal and external structural castings, for concrete in general with lightness and high resistance characteristics, for collaborative castings on slabs in Putrelle/Laterizio, laterocement, Wood. Type CLS 1.4 Available for quick drying type "R". FPC 0925 production process certificate.

INTOCALCE ST 10 Bio-mortar eco-friendly with high resistance, with compressive strength CSIV in accordance with EN 998-1, M10 and with EN 998-2 and R1 compliant with EN 1504-3, based on natural hydraulic lime NHL compliant with EN 459-1 and metakaolins, specific for structural uses. INTOCALCE ST 15 Bio-mortar eco-friendly at high resistance, with compressive strength class CSIV in accordance with EN 998-1, M15 with EN 998-2 and R1 with EN 1504-3, based on natural hydraulic lime NHL compliant with EN 459-1 and metakaolins, specific for structural uses.

Premixed, high elasticity, anti-carbonate, thixotropic, water-repellent, fibro-reinforced, shrinkage compensated to EN 1504-2 and EN 998-1 based on special hydraulic binders, suitable for universal use on any compatible substrate. For the external and internal smoothing of concrete surfaces, of rustic, plastic and / or mineral coatings, of traditional or premixed plasters based on lime and cement, both new and old, even if painted, provided they are in excellent condition, of plasters that present shrinkage lesions, concrete block walls, autoclaved cellular concrete, coatings in polystyrene panels, polystyrene (also embossed), polyurethane, cork, cement wood. To uniform plastered surfaces with different mortars. As a bonding base for coatings in polystyrene panels, polystyrene (also embossed), polyurethane, cork, cement wood. Used as a shave on coatings, it can be used as a decoration for MEHLVIT ELS / PLUS or AGROPOLI ELS / PLUS elastomeric water-based paint.

Lightweight premixed screed, conforming to the minimum environmental criteria. based on hydraulic binders and expanded polystyrene beads, with compensated shrinkage and controlled drying, ideal for hand-or machine-making of background screed Thermal insulation to be applied directly on any internal and external surface, provided that it is stable and not subjected to capillary ascent suitable to receive the subsequent application of any type of screed even with interposition of insulation mats, Acoustic noise, suitable for the thermal insulation of roofs, for lightening jets or fills.

Lightened premixed plasters based on natural lime and special hydraulic binders and light mineral aggregates, fiber-reinforced with a special polypropylene fiber composition specially designed for internal background plasters on autoclaved cellular concrete blocks (Ytong and Gasbeton type) with mechanical application and manual. Approved by the Ytong laboratories. PACKAGE: Loose in silo - 25 kg sacks - 60 bags sacks - 15.00 ql USE: Indoor COLOUR: Grey GRANULOMETRY: ≤ 1.3 mm SURRENDER: 10/11 kg / m² per cm of thickness CAPILLARY WATER ABSORPTION EN 1015-18: "W0" class RESISTANCE COEFFICIENT TO STEAM PASSAGE EN 1015-19: μ ≥ 8 THERMAL CONDUCTIVITY EN 1745: λ 10, dry, mat = 0.29 W / mK FIRE RESISTANCE ACCORDING TO DM 02/16/2007: REI 120 APPROVED BY YTONG LABORATORIES: Test Report PB-VK-170-01

It is an eco-friendly bio-mortar, fibrated with a special composition of fibres tested for the specific use, based on natural materials as cork granules and natural hydraulic lime compliant with EN 459-1 for insulating base coat screeds, soundproofing and dehumidifying, inside and outside with an high and constant quality level, produced with an automated system, to apply with a plaster sprayer, screed pump or by hand. The natural hydraulic lime ensures an hydraulic hardening very slow and constant that allows to obtain screeds with an high durability and breathability. Form no vapor barriers and contains no solvents. Recyclable as inter at the end of its life.

Macroporous Eco-frendly Bio-plaster based on natural hydraulic lime, NHL 3.5 or NHL 5 according to EN 459-1, for plasters for dehumidification, for indoors and outdoors. Available fibre-reinforced with a special composition of polypropylene fibres specially formulated "FR" type and repellent type "I". Recyclable as inert at the end of life. Specifically for the preservation of historical artefacts. Ideal for the rehabilitation and recovery of old and new walls, internal and external, subject to humidity for capillary ascent and in the presence of efflorescence of salts, underground environments not subject to infiltration of water, buildings of historical interest, churches and In any case a definitive and natural dehumidifying cleansing treatment is necessary. Anab-ICEA Certified according to UNI EN ISO 14024 Environmental labelling type I.

Premixed self-levelling screed, based on hydraulic binders, fibro-cocked, with special polymeric extruded aggregates, with compensated shrinkage and controlled drying, ideal for the realization by hand or machine, even with plastering machines. to be applied directly on any internal and external surface, provided that it is stable and not subject to capillary ascent, suitable to receive the next Application of any paving such as ceramics, terracotta, natural stones, parquets, carpets, rubber, etc.; Suitable for the realization of screed with insertion of underfloor heating and floating scree on a resilient mattress for the acoustic insulation of footstep noises

Premixed adhesive based on cement class C2 TE S1 for the indoor and outdoor installation of floor and wall coverings, with high workability, extended open time and increased adhesion and good capacity to absorb the substrate’s deformation, zero vertical slip. Specific for floor and wall coverings also non-absorbent, natural stones, overlapping non-absorbent materials, large formats on large surfaces screeds with insertion of underfloor heating, for application of porcelain stoneware at low thickness.