Bitumens - Import export

Bitumen-polymer adhesive tape BITUMER TB90 coiled material consisting of petroleum bitumen, polymer and texturing agents. Sealing tape intended for technological sealing in communication construction: • joining asphalt layers made at different times, transverse and longitudinal joining, •combinations of various materials, e.g. asphalt concrete layer with mastic asphalt layer and asphalt layer with external devices in the pavement, e.g. inlets, manholes, manholes and other infrastructure elements embedded in the road surface or limiting them (curbs, drainage elements, rails). Bitumer offers various dimensions of Bitumer TB90 tapes.

Our packaged asphalt can be used as a recycler additive. Road contractors also use it to protect technological edges. It is resistant to weather conditions, so that, it perfectly fulfills its role. Bitumer offers asphalt in 200 litre barrels and siliconed cartons 20 kg and a modern solution: bitumen in BIG BAG.A novel approach to bitumen, which makes tranport increasingly easy. Asphalt grade 70/100 is commonly used as: •an additive used in recycling asphalt mixtures, •pouring asphalt-concrete joints, •pouring asphalt-asphalt joints.

Bitumer Primbit R is a high-quality solvent-based asphalt solution with additives. It is used to prime the surface of a structure before applying the actual asphalt insulation and to maintain corroded concrete surfaces. It is an adhesion-enhancing and priming compound for asphalt masses. •ready for use after mixing, • waterproof, immediately after laying on the surface to be insulated is completely resistant to water flushing, •highly efficient, increases the adhesion of substrates to proper insulation, •perfectly penetrates deep into insulated surfaces, •for application by brush or roofing brush, •has good adhesion to dry substrates (concrete, tar paper, eternit, steel structures, etc.),

Bitumer Primbit W is a solvent-free, water-based bitumen emulsion used for performing anti-moisture and impregnation.Increases adhesion and priming under Elaston 2K and waterproofing compounds. The high dry matter content of about 55 - 60% guarantees the formation of a strong protective coating, resistant to moisture and aggressive substances contained in the soil. Bitumer Primbit W finds its use in: •performing effective, systemic protection moisture protection of roofs, flat roofs, concrete screeds, concrete, basements, baths, terraces, footings and foundations, •performance of priming and undercoating layers under Bitumer Elaston 2K, heat-sealable membranes, asphalt compounds, •can be used as a primer coat prior to the application of bitumen membranes of all brands.Due to its excellent adhesion properties, it provides stronger and space-free adhesion of the surface to the applied bitumen membranes.

Big bags, also known as flexible intermediate bulk containers (FIBCs), offer a practical alternative for transporting and storing bitumen. These large, durable bags, typically made of woven polypropylene, provide a secure and convenient means of handling bitumen throughout its journey from production to construction site.

Bitumer Flexigum N1 is a bitumen hot applied road sealant is produced from asphalt modified with SBS (Styrene-Butadiene-Styrene) polymers. The material retains high elasticity even at low temperatures down to -10 °C. The high quality of the base bitumen ensures resistance to UV radiation and a lower degree of filling degradation over time. USAGE: •for use in structural and technological fillings: -expansion joints of asphalt concrete, -cement concrete, SMA mixes (Stone Mastic Asphalt), -in squares, streets, and car parks. •the compound is perfect for sealing joints between asphalt or concrete surfaces and steel elements (manholes), •works well as filling and sealing of damaged seams in asphalt pavements.

Bitumer Flexigum N2 is a bitumen hot applied road sealant is produced from asphalt modified with SBS (Styrene-Butadiene-Styrene) polymers. The material retains high elasticity even at low temperatures down to -10 °C. The high quality of the base bitumen ensures resistance to UV radiation and a lower degree of filling degradation over time. USAGE •for use in structural and technological fillings: -expansion joints of asphalt concrete, -cement concrete, SMA mixes (Stone Mastic Asphalt), -in squares, streets, and car parks. •the compound is perfect for sealing joints between asphalt or concrete surfaces and steel elements (manholes), •works well as filling and sealing of damaged seams in asphalt pavements.

Liquid asphalt is bitumen dissolved in an aromatic hydrocarbon, petroleum or another solvent. The standard process involves heating the bitumen to reduce its viscosity and then mixing it with an appropriate hydrocarbon fraction. The resulting bituminous solution is used as: •a primer material, •a bitumen thinner, •a material to serve as a priming layer for aggregate before applying subsequent asphalt layers. Depending on the end user’s requirements, an appropriate solvent is used.

Bitumer Flexigum PU is a one-component bitumen-polyurethane compound that forms a permanently flexible and chemically resistant fastening and stress transfer compound. Bitumer Flexigum PU finds its use in: •for continuous resilient fixing of the rail as a subfloor, •rail fastening compound and as a lagging for the underfloor, •for making permanent and flexible expansion joints between concrete slabs and elements made of steel, •filling the gaps located between the road strip and the rail, •for filling concrete-to-concrete joints •filling joints, gaps, cracks and expansion joints in heavily worked asphalt and concrete pavements ( e.g., curbs on bridges), •filling joints "working" on steel and concrete bridges and other pavements characterized by strong movements.

Bitumer Primal is a high-quality solvent-based polymer solution with added refiners. It is used to prime mineral surfaces before applying hot-applied bitumen products. The material is also used to preserve corroded concrete surfaces. It is an adhesion- enhancing and priming compound for asphalt compounds, bituminous grouts. USAGE •for making priming and base layers under hot-mix pouring compoundstype N1, N2, N10, • for making anti-corrosion coatings of concrete, • for making coatings that protect mineral surfaces against moisture penetration.

Bitumen Asphalt Tanker Trailer fully equipped based on client's needs.

Gilsonit’s unique properties make it important for many oil field drilling fluid products. Recent boom in oil and gas development has increased demand. Gilsonit, in various grades and formulations, has been used to combat borehole instability problems, provide lubricity, especially in highly deviated holes, and more recently as a bridging agent to combat differential pressure sticking and provide a law invasion coring fluid. commercial@pub-ltd.com Whatsapp: 00905354837392 Ms.Mona

Drilling Fluid Grade – An important characteristic of Gilsonit is its softening-point temperature. In oil-base muds. It use as fluid-loss control agent because it`s hydrocarbon properties. It`s naturally wetted by oil. In water base mud, it is used as a shale-stabilizer additive and is difficult to evaluate unless tested at or above its softening point. As a hydrocarbon, powder must be coupled to water by using a glycol or similar water-wetter. commercial@pub-ltd.com

Oxidized Bitumen 90-10 is made by ongoing or Staggered Blowing Process. Heated Penetration bitumen under controlled environment is blown with air which controls oil content in bitumen while it oxidized. The different grades for suited applications produced are designated by two numbers to indicate the mid-points of their softening point and penetration ranges. commercial@pub-ltd.com Whatsapp: 00905354837392

With a unique blend of strength, flexibility, bonding and high-temperature capability, asphaltum adds properties also increase performance in cementing and drilling fluids in a way no other single additive can. Further,ore, Gilsonit, in a range of softening points and particle sizes, is a standard ingredient in oil-based drilling muds used in shales and other difficult geological formations. commercial@pub-ltd.com Whatsapp:00905354837392

bitumen`s strength properties are secured, because there`s no needed to heat. Cold mixing or slightly warm ingredients emulsion mix are use for pavements construction.. Emulsion can used in wet weather even when it is raining. It possess anti-stripping properties. There is no wastage during laying and storage. Emulsions with lower viscosity or thinner consistency improve spreadability and allows better coating of the bitumen on the surface of aggregate. Less effect on environment, because it`s water base. It is the least energy intensive of all construction material: there is no need to heat. commercial@pub-ltd.com Whatsapp: 00905354837392

Semi Refined Paraffin Wax is more than 1% oil content. The price of semi refined paraffin wax is lower than fully refined paraffin wax . For candle making and match industry the quality of semi refined paraffin wax is very good . We produce paraffin wax in 5 kg slabs and pack 5 slab in carton or gunny. Categorizing is based on a range of oil content : 1-2% , 1-3% , 3-5% , 5-7% , 7-10%; commercial@pub-ltd.com Whatsapp: 00905354837392

Application Oxidized Bitumen 95-25 is a dark industrial bitumen. Petroleum residue modified by the oxidation process. In addition Oxidized Bitumen is produced by passing air through bitumen under controlled temperature state. Its stability ranges from highly viscous to solid. Blown bitumen grade has technical advantages such as durability, flexibility, water resistant and chemical stability. There is also different grade of blown bitumen. commercial@pub-ltd.com WhatsApp: 00905354837392

Oxidised Asphalt 85/25 uses in the chemical, fuel, paints, lacquers, varnishes, paper-pulp-board, textile processing. Also it`s using in road construction, pavement ,crack seal and repairmen, civil works, roofing, construction industries; sealing and insulating buildings, adhesive, construction materials additive, dust-binding, coating, insulating and impregnating agent, make rubber and plastic products. commercial@pub-ltd.com WhatsApp: 00905354837392

POLYMER ADDED ULTRA FLEXIBLE HIGH ADHESION UV RESISTANCE SOLVENT DESIGN ECONOMIC WITH ITS HIGH BINDING RATE, BEYOND THE COMPETITORS 17 LT METAL PACKAGING WATERPROOF FEATURE FULL COMPATIBILITY WITH BITUMEN AND GEOTEXTILE MEMBRANE COVERS! ADHESIVE FEATURE BETWEEN CONCRETE AND ASPHALT EXTRA!

JSP SEPO NOVUS offers a variety of hard and liquid bitumen for shipping: 40/50, 50/70, 60/70, 70/100, 80/100, 100/150, 160/220. Adjustable in the construction and maintenance of roads, airfields and other pave area. Available supply from 20 MT/Month up to 35 000 MT/month. Corresponding to the EU unified requirements BS EN 12591: 2009 and the manufacturer's specifications. Delivery terms & conditions Flexible delivery terms: FOB and/or CIF, or any other as required. Proper package size and type results in significant reduction of delivery costs and loading time.

Asphalt plants create the hot mix material by mixing different types of aggregate, bitumen and filler. The advantage of our continuous type asphalt plants is production high quality asphalt, because of very sensitive dosing with accordance to recipe accepted in your country. - Number of different aggregates : 4-5-6 - Mobility : Stationary and Mobile type - Capacity offered : 80 - 120 - 160 tph - Hot asphalt storage bunker : optional - Bitumen tanks : you can purchase from us, as well as from domestic market - Aftersale Service : can be provided from Turkey and Algeria - Operation System language : English - Russian - Turkish - French You can contact us any time. We can speak in English, Russian, Turkish, French and Arabic to make you feel comfortable.

Thickness : 2,5 - 3,5 mm Width : 960 mm Effective Width : 920 mm Purlin spacing : 750 mm Lengths : 2-8 meters

For tar or hot bitumen at temperatures from –25°C to +200°C. With additional spiral for maximum safety and highest possible flexibility. Construction: Special NBR tube Tension and pressure-resistant fabric inlays Embedded copper wire Concealed steel spiral abrasion-resistant CR-cover interior and exterior smooth, fabric patterned Please follow the safety regulations for bitumen hoses! Tar spraying hose Bitumen hose Sold by the roll or cut to length with cuffed ends and/or widened hose endings. Also available as heatable version or per DIN EN 13482. Other versions and dimensions on request.

Molecular formulaC9H20O2 Molecular weight160.3 CAS number2568-90-3 EC number219-909-0 IUPAC name1-(Butoxymethoxy)butane EC name1.1'-[Methylenebis(oxy)]dibutane

Eco-friendly ester-based cleaner designed to remove bitumen, tar, grease, oil stains. An agent based on vegetable hydrocarbons with additives that make it easier to wash stains from the cleaned surface. CLEAN-BIT ECO is used to remove dirt from metal, steel, chrome, aluminum and painted surfaces. The agent is ideal for cleaning tools and equipment designed to work with heavy hydrocarbon fractions such as asphalt, tar. Does not cause corrosion of cleaned metal surfaces CLEAN-BIT ECO deeply penetrates the surface to be cleaned, reacts with the oil stains dissolving them and at the same time breaking down their structure. •high efficiency of action, •easy to use, •removes even old dried stains, •wide range of action on the type of stains. APPLICATION Apply the product to the stains with a microfiber cloth.Gently wipedirty surface.For heavier dirt, apply the product directly to the surface to be cleaned and wait 5 minutes. Wipe off the stains with a microfiber cloth.

An agent designed to remove bitumen, tar, grease, grease, oil stains. CLEAN-BIT is used to remove stains from metal, steel, chrome, aluminum and painted surfaces. The agent is ideal for cleaning tools and equipment designed to work with heavy hydrocarbon fractions such as asphalt, tar. CLEAN-BIT deeply penetrates the surface to be cleaned, reacts with the oil stains dissolving them and at the same time breaking down their structure •high efficiency of action, •easy to use, •removes even old dried stains, •wide range of action on the type of stains. APPLICATION Apply the product to the stains with a microfiber cloth. Gently wipe the soiled surface. For heavier dirt, apply the product directly to the surface to be cleaned and wait 5 minutes. After this time, wipe off the stains with a microfiber cloth.