Finish coat - Import export

TECHNICAL DETAILS Paste coating for a good finish on interior walls and ceilings. Provides excellent surface preparation before painting or hanging coverings. COMPOSITION AND APPEARANCE Emulsion resin, calcium carbonate, rheological agent and various additives. SEMIN ENDUIT DE LISSAGE is a water-based coating. The paste is white in colour. COVERINGS • Wallpaper • Paint • Wall covering SUITABLE SURFACES Interior walls and ceilings • Plasterboards • Plaster tiles • Concrete • Cement coating TECHNICAL CHARACTERISTICS • Density of paste : 1.9 • Granulometry : fine • pH : 7 Adhesion : complies with NFT 30 608 PACK SIZE 4 and 10 kg buckets on shrink-wrapped pallet. APPLICATION Apply manually using a smoothing trowel or a filling knife. The maximum thickness will be 2 mm per coat. Allow to harden and remove imperfections before sanding, if necessary. Print the SEMIN ENDUIT DE LISSAGE if applying satin-finish or gloss paint. Clean tools in water.

TECHNICAL DETAILS Interior ready-to-use smooth finish coating, easy to apply - requires less sanding down than a traditional coating and therefore creates less dust. Apply with spatula, then sand down. Less dust is created, and the dust is less volatile. SUITABLE SURFACES Interior walls and ceiling : plasterboards, gypsum blocks, concrete, cement coating, aerated concrete, sealants. REFERENCE DOCUMENTS DTU 59.1. PACK SIZE 25 kg bucket. AFNOR NFT 36.005 AMOUNT REQUIRED From 0.6 to 1 kg/m² depending on quality of surface. DRYING TIME 6 to 24 hours depending on conditions and quantity applied. RECOMMENDED APPLICATION To avoid all traces of filler, finish with a slightly rounded action.

TECHNICAL DEFINITION SEMIN AIRLESS is an interior finishing coating designed for Airless projection. It is ideally suited to the preparation of pre-slabs, walled concrete and plasterboards before painting. COMPOSITION AND APPEARANCE Emulsion acrylic resin, mineral filler, cellulose derivatives, conservation agent and various additives. ACCEPTED SUBSTRATES • Pasterboard • Filling coatings • Old paintwork • Smoothed concrete • Plaster blocks SUITABLE SURFACES SEMIN AIRLESS can be covered with any acrylic or oil-based paint. TECHNICAL CHARACTERISTICS • Dry matter: 72% • Density: 1.6 PREPARATION OF SURFACES BEFORE APPLICATION The substrate must comply with DTU 59.1, i.e. be clean, dry, free of dust and of any trace of stripping oil. Plasterboard must be primed. APPLICATION SEMIN AIRLESS can be projected with any type of Airless type 695, 795 or Mark 5 machine, fitted with an Airless tremie and a size 21, 23 or 41 nozzle.

TECHNICAL DEFINITION CE 78 PERFECT’LIGHT is a lightweight ready-mix paste specially formulated for jointing mitred-edge plasterboards in association with plaster tape. COMPOSITION AND APPEARANCE Resin, water, calcium carbonate, lightweight fillers, preservation agent and various adjuvants. The paste is white. COVERINGS. Plasterboard primer. Smoothing filler. REFERENCE DOCUMENTS • CE marking • DTU 25.41 and DTU 25.42 • NF EN 13963 • DoP PACK SIZE 20 kg buckets on covered pallet. STORAGE 12 months in original unopened packaging away from frost and high temperatures. APPLICATION Before actual jointing, fill any accidental gaps between boards and any other areas (spalls, deterioration of the surface etc.). Apply manually by «buttering» the mitred-edge using a 10 or 15 cm plaster spatula and then adding the tape Then add a finishing coat, allow to dry and finish to hide the tape. Also hide the screw heads. For projecting vertical edges, use reinforced tape.

» Complementary solution designed to be placed in the exterior of the windows by means of hidden fixings. » It allows the safe opening of windows and doors enjoying an unobstructed view. » Glazing This railing system allows 8 glazing possibilities: double laminated glazing of, 8 or 6 mm joined by up to 4 polyvinyl butyrals of 0.38 mm. The use of tempered glass is suggested. Composition 8 - 1.52 - 8 8 - 1.14 - 8 8 - 0.76 - 8 8 - 0.38 - 8 6 - 1.52 - 6 6 - 1.14 - 6 6 - 0.76 - 6 6 - 0.38 - 6 Maximun width 1,800 mm » Finishes Colour powder coating / Anodised

» Counter-window system » Fixed or adjustable louvres » Opening possibilities Side hung 1, 2, 3 & 4 sashes » Sections Frame – 40 mm / Sash – 48 mm » Profile thickness Window 1,3 mm Door 1,4 mm » Maximum dimensions/sash Width (L) = 1,600 mm Height (H) = 2,500 mm » Maximum weight/sash 100 kg Please consult regarding maximum weight and dimensions for other opening types » Finishes Colour powder coating (RAL, mottled and rough) Wood effect powder coating Anti-bacterial powder coating Anodised

» Opening possibilities Side hung of 1, 2, 3 & 4 sashes Bi-fold Slider » Closing Possibilities Fixed or adjustable louvres Opaque closing (panel sandwich) Glazed closing » Sections Frame 47 mm Sash 40 mm » Profile thickness Window 1.3 mm Door 1.5 mm » Maximum dimensions/sash Side hung Width (L) = 1600 mm Height (H) = 2500 mm » Counter-window system » Fixed or adjustable louvres » Opaque closing system (sandwich panel) » Allows for glazed closing Bi-fold Width (L) = 700 mm Height (H) = 2500 mm Slider Width (L) = 2000 mm Height (H) = 3500 mm Please consult regarding maximum weight and dimensions for other opening types » Maximum weight/sash Bifold 50 kg Side hung 65 kg Slider 120 kg » Finishes Powder coating / Anodised

» Lattices » Decorative lattices » Clip lattices » Mini-lattices » Tubular louvres » Decorative louvres » Façade covering louvres: Punched & square ondulated » Maximum recommended length / Visibility coefficient Lattices 2.0 m / 81% to 35º Decorative lattices 1.5 m / 56% to 50º Clip lattices 1.3 m / 55% to 45º Mini-lattices 1.3 m / 55% to 45º Tubular louvres 2.0 m / 76% to 90º Decorative louvres 6.5 m / 96% to 90º * Depending on project specifications, it is possible to reach a longer louvre length (please consult us) » Finishes Colour powder coating (RAL, mottled and rough) Wood effect powder coating Anti-bacterial powder coating Anodised

» Wide range of mullions (from 130 mm to 250 mm) and transoms (from 40.5 mm to 255.5 mm) » Internal section of 52 mm » This skylight system allows for an easy integration of our veranda systems, our hinged windows or our sliding window/door systems » It allows the possibility of adding a motorized top hung projecting opening in roof areas » Glazing Fixed Maximum 50 mm Minimum 24 mm Window roof Maximum 38 mm Minimum 24 mm » Opening possibilities Motorized top hung projecting » Sections Mullion 52 mm Transom 52 mm » Profile thickness Mullion 2,1 and 3 mm Transom 2,1 mm » Minimum incline / slope Pt = 12% (7º) » Maximum incline / slope Pt = 85% (40º) » Finishes Powder coating / Anodised

Solid wood boards including finish are assembled and bonded manually according to individual customer requirements or VRS standard according to color and structure. The boards are glued according to stress group D4. The blanks are sanded with at least 180 grit and CNC machined with formatting, milling, drilling, etc. according to customer requirements. CNC machined. The finished panels are treated with varnish or oil. Stains or colored oils are also possible. Wood species: All common European hardwood and softwood species as well as some North American wood species. Oak, beech, maple, cherry, ash, American walnut and European walnut are in stock as standard. Other types of wood can be procured at short notice. Dimension: Sizes up to 3.05 x 1.3m are produced regularly. Larger dimensions must always be clarified due to the availability of wood. Thicknesses from 15 - 60mm. "

Various sizes. Plastic-coated or bright-finished surface. Various hub versions.

Material: - seat and backrest: foam padding with fabric cover - seat Cushion: 600 gr cold cast polyurethane foam - ribbed aluminium frame: electrostatic powder coated finish, 25 x 25 mm, 2,00 mm thick Selection options: - upholstery color - frame color

Material: - seat and backrest: foam padding with fabric cover - seat Cushion: 600 gr cold cast polyurethane foam - ribbed aluminium frame: electrostatic powder coated finish, 25 x 25 mm, 2,00 mm thick Selection options: - upholstery color - frame color

Material: - seat and backrest: foam padding with fabric cover - seat Cushion: 600 gr cold cast polyurethane foam - ribbed aluminium frame: electrostatic powder coated finish, 25 x 25 mm, 2,00 mm thick Selection options: - upholstery color - frame color

Material: - seat and backrest: foam padding with fabric cover - seat Cushion: 600 gr cold cast polyurethane foam - ribbed aluminium frame: electrostatic powder coated finish, 25 x 25 mm, 2,00 mm thick Selection options: - upholstery color - frame color

Material: - seat and backrest: foam padding with fabric cover - seat Cushion: 600 gr cold cast polyurethane foam - ribbed aluminium frame: electrostatic powder coated finish, 25 x 25 mm, 2,00 mm thick Selection options: - upholstery color - frame color

Material: - seat and backrest: foam padding with fabric cover - seat Cushion: 600 gr cold cast polyurethane foam - ribbed aluminium frame: electrostatic powder coated finish, 25 x 25 mm, 2,00 mm thick Selection options: - upholstery color - frame color

Material: - seat and backrest: foam padding with fabric cover - seat Cushion: 600 gr cold cast polyurethane foam - ribbed aluminium frame: electrostatic powder coated finish, 25 x 25 mm, 2,00 mm thick Selection options: - upholstery color - frame color

Material: - seat and backrest: foam padding with fabric cover - seat Cushion: 600 gr cold cast polyurethane foam - ribbed aluminium frame: electrostatic powder coated finish, 25 x 25 mm, 2,00 mm thick Selection options: - upholstery color - frame color

Material: - seat and backrest: foam padding with fabric cover - seat Cushion: 600 gr cold cast polyurethane foam - ribbed aluminium frame: electrostatic powder coated finish, 25 x 25 mm, 2,00 mm thick Selection options: - upholstery color - frame color

Material: - seat and backrest: foam padding with fabric cover - seat Cushion: 600 gr cold cast polyurethane foam - ribbed aluminium frame: electrostatic powder coated finish, 25 x 25 mm, 2,00 mm thick Selection options: - upholstery color - frame color

Material: - seat and backrest: foam padding with fabric cover - seat Cushion: 600 gr cold cast polyurethane foam - ribbed aluminium frame: electrostatic powder coated finish, 25 x 25 mm, 2,00 mm thick Selection options: - upholstery color - frame color

Material: - seat and backrest: foam padding with fabric cover - seat Cushion: 600 gr cold cast polyurethane foam - armrest with writing board - ribbed aluminium frame: electrostatic powder coated finish, 25 x 25 mm, 2,00 mm thick Selection options: - upholstery color - frame color

Robust handwheel made of aluminum casting. Rounded design with dirt corners minimized. Various sizes. Plastic-coated or bright-finished surface. Various hub versions. Turning handle as an option (see accessories).

Classical handwheel made of aluminum casting. Various sizes. Plastic-coated or bright-finished surface. Various hub versions. Turning handle as an option (see accessories).

The stamping parts are formed by metal stamping with 2.0mm Steel plate, which can release your hands during watching IPAD, after assembly all components together, put your IPAD on the display support, it is safe ans easy to assemble, the surface finish is powder coated in black, looks elegant, the weight of this unit is around 1.5kg.

Material: - seat and backrest: foam padding with fabric cover - seat Cushion: 600 gr cold cast polyurethane foam - ribbed aluminium frame: electrostatic powder coated finish, 25 x 25 mm, 2,00 mm thick - double support braces Selection options: - upholstery color - frame color

Material: - seat and backrest: foam padding with fabric cover - seat Cushion: 600 gr cold cast polyurethane foam - ribbed aluminium frame: electrostatic powder coated finish, 25 x 25 mm, 2,00 mm thick Selection options: - upholstery color - frame color

Material: - seat and backrest: foam padding with fabric cover - seat Cushion: 600 gr cold cast polyurethane foam - ribbed aluminium frame: electrostatic powder coated finish, 25 x 25 mm, 2,00 mm thick Selection options: - upholstery color - frame color