Vaporizers - Import export

Vaporizing machine Saturno – Designed to relax the textile fibers and allow dimensional stability. The fabric in entrance, as plaite, big or small roll, is overfed and spread on a perforated conveyor belt that carries it through the different working fields. The first two sections of the treatment system are constituted by high temperature vaporizing tunnels, realized in stainless steel with anti-condensation units. Between the two sections there is a device that makes the belt vibrate to facilitate the relaxation and shrinkage of the fibers. At the output of the last steaming tunnel, an adjustable forced hot air drying group is installed. In the final part of the machine there is a double cooling field blocking the movement of the fibers (thermic shock). Both the drying field and the cooling one are above the conveyor belt in order to avoid a direct contact between the air flows and the right side of the fabric.

A broad variety of gas transmission cells are : Gas Cells analysis of gas & vapour phase components in IR optical spectroscopy. These range from short path length gas cells for percent level concentration measurement, to long path length gas cells for part-per-billion concentrations. Options include fixed and variable path length gas cells, as well as ambient temperature and heated gas cells. The windows that can be used with the gas cell include NaCl, KBr, CaF2, BaF2, or ZnSe infrared transmission windows, which are mounted in an optical spectrometer. Knight Optical supply high quality Gas Cells optical components made to our exacting specification. For more information read the PDF

The VM-3000 Mercury Vapor Monitor measures continuously the Hg concentration in air and other gases.

Spray bottles with pump vapouriser and safety cap for the pump. Liquids can be finely vapourised at the push of a button in an environmentally compatible way. The transparent bottles make identification of contents easy. The protective cover prevents unintentional pressing of the pump and acts as a dust cover.

Carbolescer is a combination of plated coalescing media, carbon layer, and wrapped particulate media. Aerosol form of oil is eliminated with coalescing action in the plated media. When oily compressed air enters the unit, oil droplets accumulate and fall down through the filter media. Collected liquid oil is drained from the automated drain.

Many industries such as the electronic and hospital industries, pharmaceutical industries, food and beverage sectors require the removal of residual oil vapors and odors from the compressed air. Mikropor’s solution for this application is the MCT Series activated carbon towers. With standard pre and after filters such as particulate filters, water coalescers and oil coalescers, the oil content inside the compressed air can be reduced to 0.01 mg/m³ (0.01 ppm) for applications of EXTREME air quality such as hospital, pharmaceutical industries, or food and beverage industries, the residual oil content may need to be reduced to 0.003 mg/m³ (0.003 ppm).

— For recovering heat from flash steam from thermal water treatment — Heat recovery and thus efficiency improvement — Energy produced can be used for additional heating or for transfer to a separate water circuit Highly efficient boiler systems with perfectly matched boiler house components ensure that low levels of energy consumption and emissions are achieved.

STIFERITE AI6 Edilizia a high performance insulation board manufactured from CFC or HCFC free closed cell Polyiso (PIR) rigid foam, covered on both sides by a 60 μm thick embossed aluminium facer. The STIFERITE AI6 panel is suggested for walls and floors. Ideal for applications requiring a vapore barrier. Available in AI8 version, embossed aluminium facer of 80 µm. Produced by a company certified with systems ISO 9001, ISO 45001 and ISO 14001. CE conformity marking on the entire line..

Jet Flow Safety Valve represent the most advance technology in value designed for use in intermediate power boiler and organic fluid vaporizer service. Built in conformance to section I of the ASME boiler and pressure vessel code, all capacities am certified by the national board of boiler and pressure vessel inspector at 5% over pressure. Jet Flow Designed Safety Valve with Full Nozzle & hardened disc to minimize maintenance and increase seat life Open bonnet & Close bonnet both design have maximum set pressure 75 bar in Safety Valves. Material of Construction. Set pressure in psig or Kg/cm2 (g). Maximum inlet temperature. Allowable overpressure. ServiceSpecify either the media to be handled or the following physical properties or both. LiquidsSpecific gravity (Water = 1) GasesSpecific gravity (Air=1) VaporsMolecular weight (mixture of vapors. The average molecular weight) Back pressure, if any. Required capacity. Type of Endconnections. Preferred inlet size.

Suitable for outdoor facades: Professional Silicate Facade Paint AS17 can be applied universally to viable lime- and cement plaster, concrete, and brickwork. Also very well-suited for External Thermal Insulation Composite Systems (ETICS) as well as wheathered, matt dispersion- and silicone resin coats. Solvent-free, silicate dispersion paint enriched with nano-quartz-particles (silicate sol) in accordance with VOB/C DIN 18363 2.4.1. Its special composition and ingredients create an inseparable microporous bond with the substrate. This silicification results in perfect adhesion and achieves an extremely good durability even on critical substrates. Highest color stability: A1 (FB-Code, BFS-MB Nr. 26).

Suitable for professional Silicate Interior Wall Paint can be applied universally to viable lime- and cement plaster, concrete, brick and woodchip textured wallpaper. The solvent-free, silicate-enriched wall paint is specially made for these types of surfaces. Its special composition creates an inseparable microporous bond with the substrate. This silicification results in perfect adhesion and produces extremely strong durability even on critical substrates. Highest color stability: A1 (FB-Code, BFS-MB Nr. 26).

Suitable for professional Silicate Interior Wall Paint can be applied universally to viable lime- and cement plaster, concrete, brick and woodchip textured wallpaper. The solvent-free, silicate-enriched wall paint is specially made for these types of surfaces. Its special composition creates an inseparable microporous bond with the substrate. This silicification results in perfect adhesion and produces extremely strong durability even on critical substrates. Highest color stability: A1 (FB-Code, BFS-MB Nr. 26).

Suitable for outdoor facades: Professional Silicate Facade Paint AS17 can be applied universally to viable lime- and cement plaster, concrete, and brickwork. Also very well-suited for External Thermal Insulation Composite Systems (ETICS) as well as wheathered, matt dispersion- and silicone resin coats. Solvent-free, silicate dispersion paint enriched with nano-quartz-particles (silicate sol) in accordance with VOB/C DIN 18363 2.4.1. Its special composition and ingredients create an inseparable microporous bond with the substrate. This silicification results in perfect adhesion and achieves an extremely good durability even on critical substrates. Highest color stability: A1 (FB-Code, BFS-MB Nr. 26).

Statox 501 PID - the Allrounder PIDs (Photo – Ionisation – Detectors) detect VOCs (Volatile Organic Compounds) in the ppm range, which other sensor types are unable to monitor, like solvents and fuels. A PID sensor uses high energy ultra violet light radiation to break gas molecules into radicals, which are discharged while passing a condenser. The discharge current increases proportional to the number of molecules, i. e. the gas concentration. The standard Statox 501 PID will detect all substances with a ionization energy below 10,6 eV PIDs are normally calibrated with Isobutene. Other gases will be detected with different sensitivity. These so - called response factors must be multiplied with the displayed concentration when adjusting span. Compur Monitors will adjust your Statox 501 PID individually to your application ex works. A magnetic pin gives access to simple parameter setting and calibration menu. A multi - color LED signalises the status of the system. The Statox 501 PID voltage output signal is similar the the signal of a catalytic sensor. The Statox 501 control module displays the measured value and provides an analog output and 3 powerful relay outputs for alarm devices or pcs. Technical Data Material: Housing Interface Cast aluminum, Stainless steel

Especially the theoretically additional evaluation of the temperature and pressure dependence of phase equilibrium is insufficient very often in daily practice, thus the experimental determination of VLEdata is increasingly requested in the overpressure range, too. ILUDEST®/ iFischer® modified the VLEequipment, since decades sold under the worldknown FISCHER® brand, suitable for the overpressure range up to 50 bar. The VLEequipment is designed for a charge of 50 ml (dynamic mode) and can be operated under vacuum (1...1,013 mbar), atmcondition and overpressure (1...50 bar) as well as temperature up to 250°C. An extended operating range up to 100 bar is possible.

Scientists and chemical engineers still measure phase equilibria despite the significant improvement in theoretical evaluations. Therefore, our phase equilibrium apparatus is part of the standard equipment in chemical engineering laboratories. The vapourliquid equilibrium of binary and multicomponent mixtures constitute an essential basis for the determination of the theoretical plates necessary for the evaluation of separation processes. Although VLEdata are known from literature, there is still an increasing tendency towards redetermining equilibrium data by experiments, because the thermodynamic parameters like pressure, temperature and concentrations are different or inadequate. For designing e.g. extractive distillation processes the evaluation of vapourliquidliquid phase equilibria (VLLEdata) are required. The practical measurement and determination of these data proves difficult with the standardised VLEunits because of the phase formation of the liquids.

Hot solvent vapour is applied to the surfaces of the parts where it condensates, forming a solvent film in which dirt is dissolved. As the solvent condensate runs down along the parts, it takes with it the dirt particles (dust, chips, etc.), leaving behind clean surfaces. This physical cleaning effect results in thoroughly cleaned surfaces.

Shell and Tube Heat Exchangers | Air Coolers, Air Heaters, Pressure Vessels | Gas cooling in pneumatic conveying systems | Air cooling in industrial refrigeration | Air drying in textile machines | Air heating & cooling in HVAC systems | Coolers for A.C and D.C motors | Coolers for power transformers | Diesel and gas engines water cooling | Air preheaters for boiler plants | Economizers for steam, oil and hot water generation | Hydrocarbon condenser | Industrial process water cooling | Inter and after coolers | Oil cooling in lubrication system | Solvent recovery by condensation | Steam condenser

Polycarbonate fume hood to be mounted on parts cleaning collector : 1000 x 570 x 600 mm Aluminum structure with transparent panels, with ventilator unit. 230 V

Bases Exhaust diffusers Plenums Inlet Ducts Exhaust Ducts Exhaust Casings Inlet Collectors Exhaust Collector Air Intake Manifolds for gas turbines Piping Vessels Small high alloy parts

Features ■ Pressure transmitter for the measuring of relative and absolute pressures of gases, vapors and liquids ■ Stainless steel case in sturdy design, degree of protection IP 65/67 ■ Accuracy 0.1 % ■ High-resolution graphic display with Intuitive 4-button operation and backlight ■ Comprehensive parameterising and simulation and diagnostic functions ■ Nominal range 0.25 bar to 400 bar ■ Turndown up to 100:1 ■ Measuring rate up to 100 Hz ■ Output signal 4…20 mA with HART® protocol ■ Digital communication via PDM, FDT/DTM, 375/475 Field Communicator ■ Output functions: linear, invers, square root, table function ■ Media temperature -40…100 °C ■ Wetted parts stainless steel ■ Case design: process connection bottom or back ■ Process connections: various screw-in thread with internal diaphragm ■ Approved according to NAMUR 95 Options ■ Explosion protection; SIL2; material certificate and calibration certificate per EN 10204 ■ Degree of protection IP 69K

Single stage IPA solvent vapour component drying machine for critical applications – link to the Vapour Dryer whitepaper. - Does not require Zone 1 & 2 area – can operate in standard production environment. - Marangoni alternative - Water displacement technology. - PLC controlled for ease of use. - Vapour zone - Freeboard area - Ease of maintenance - Flexible process with ease of use via HMI - Retain your existing validated process - Fire protection and suppression systems. - Flammable vapour detection and handling facilities. - Solvent handling to facilitate the safe filling and draining of the process fluids. - Solvent re-processing system. - Internal automated product handling. - Exhausted environmental enclosure. - Primary cooling coils. Cooling water to be supplied by customer facilities or a local chiller can be supplied as optional. - Sealed sliding tank lid. - Manufactured entirely from stainless steel. - Etc. ** Click for more **

For precision component critical cleaning and drying applications including validated processes. Future proofed design with a 5-year manufacturer’s warranty. - Designed to use all types of non-flammable degreasing solvents including HFE, Novec, nPB. - All machines manufactured in the UK. - All stainless-steel construction – traceability certification available. - Specialised fabrication available if required. - Pickled, passivated and electro polished to extend operation life. - Sealed, sliding lid to ensure solvent retention. - Multi-frequency ultrasonic transducers. All ultrasonics used sweep frequency technology. - Heated tanks have direct contact tube heaters for energy efficiency and longevity. - Etc. ** Click for more **

The Acetone Dipping Machine is a semi-automatic equipment to treat acetate products in acetone vapors. Respectful of anti-pollution and safety norms and respectful of operator’s health. All steps of the working cycle are controlled by protection systems to guarantee maximum security respecting safety norms and ATEX certification.

These standardised special films are utilised in the interior and roof expansion. In the roof expansion they insulate the roof construction inwardly against wind and moisture and provide insulation against the loss of heat and maximum protection against moisture toward the outside. Our vapour barrier films comply with the regulations of DIN EN 13984:2005 Insulation films - plastic and elastomer vapour barrier films Our films are furthermore equipped with an additive to inhibit flames and thus comply with the definition and characteristics, fire class E according to DIN EN 13501-1, CE. The respective test certificates, declarations and data sheets are available and may be provided upon request.

From sputtering targets to materials used for thermal/e-beam evaporation, Angstrom Sciences has the ability to suggest and direct the most suitable materials for any application. We draw from variety of specialized processing techniques such as Hot Pressing, Cold Pressing, Hot Isostatic Pressing (HIP), Cold Isostatic Pressing (CIP), Vacuum Induction Melting (VIM) and Vacuum Arc Casting to produce homogenous, fine-grained, high-density materials that conform to the strictest application standards. We routinely provide backing plates (copper, molybdenum, copper-chromium) for planar, circular and cylindrical sputtering targets, conductive pastes and thermal transfer foil for sputter target cooling, and also offer bonding services as part of our comprehensive range of services to the PVD community.

The VapePods are an excellent way for consumers to get their daily dose of naturally occurring plant compounds discreetly. Provacan's prefilled pods are compatible with Kanabos’ medically certified VapePod device, also available from Provacan. The purity of the pods formulation eliminates the use of potentially harmful chemicals, including the commonly used additives vegetable glycerin and propylene glycol. Furthermore the formulations contains no nicotine, pesticides, heavy metals, solvents, or vitamin E fillers. The vape device's unique design eliminates the need for such ingredients to thin the oil, providing buyers with more organic compounds and no filler components. Full list of ngredients include Cannabidiol (CBD) 72%, Cannabigerol (CBG), other minor cannabinoids, various terpenes and flavonoids Terpinolene, Alpha Pinene, Myrcene. To use simply Insert the pod into the device until you hear a magnetic click. Inhale the vaporiser until it stops vibrating.