Oil filters - Import export

The oil filter helps clean the contaminants in the oil that may accumulate over time. The importance oil filter is to prevent any abrasive or unwanted particles to reach to compressor thus providing longer life-span. Using coalescent filter, it has the superior filtering capability. PROPERTIES: It has a working pressure of 130 bars, Filtration with coalescent filter, SAE or ODS connection options

The oil filter helps clean the contaminants in the oil that may accumulate over time. The importance oil filter is to prevent any abrasive or unwanted particles to reach to compressor thus providing longer life-span. PROPERTIES: It has a working pressure of 130 bars, SAE or ODS connection options

The oil filter helps clean the contaminants in the oil that may accumulate over time. The importance oil filter is to prevent any abrasive or unwanted particles to reach to compressor thus providing longer life-span. Using coalescent filter, it has the superior filtering capability. PROPERTIES: It has a working pressure of 45 bars, Filtration with coalescent filter

The oil filter helps clean the contaminants in the oil that may accumulate over time. The importance oil filter is to prevent any abrasive or unwanted particles to reach to compressor thus providing longer life-span. PROPERTIES: It has a working pressure of 45 bars, SAE or ODS connection options

Cora®Oil is an oleophilic polyster fleece and a unique technical innovation! Cora®Oil is a high quality thermally bonded polyester nonwoven and capable of separating oil and water. This allows oils to be completely filtered out of water. Another advantage: Cora®Oil can be used in all common band filters.

The point bonded polyester fleece Cora®Dot is ideally suited for filtration of rolling oil by using of precoating agents.

The PFOS oil separator as an alternative to oil skimmer The Profluid oil separator clean the cooling water of cutting machines in approx. 2 hours. Due to their well thought-out design they are very easy to operate and maintain. The oil separator separates oil and cooling water by means of a porous filter. This porous filter has an effective resolution and works without clogging. By the difference of the specific weight the oil drives the surface. The result is an easy separation and removal of the oil. Regular cleaning and separation of oil and emulsion prevents health problems for your employees. Another positive aspect is the increase in the service life of the cooling water. Cooling channels can become clogged due to contamination of the cooling water. This can be prevented by cleaning the cooling water. Excessive wear of machine parts and corrosion on workpieces can also be the result of contaminated cooling water.

OIL FILTER AND OTHER FILTERS OF BUS AND TRUCK SPARE PARTS ORIGINAL OR AFTERMARKET. ATEGO, AXOR, ACTROS, TRAVEGO, TOURISMO, SETRA, NEOPLAN, TOURLINER BUSES AND TRUCK SĞPARE PARTS.

Up to 50% Coolant Saving Up to 90% Saving in Disposal Improved price for swarf without coolant Improved Housekeeping The Wogaard Coolant Saver collects the cutting-fluid that is normally wasted through the machine tools automatic chip conveyor. The cutting fluid is reclaimed from the chip-container and returned to the machine tool's main tank for re-use. Wogaard can help reduce consumption of cutting fluid and water, reduce the amount of waste fluid collected and disposed of and end fluid leaks that create potential health and safety issues. The Wogaard Coolant Saver is easy to install and is virtually maintenance free. It is driven by the machine tool's onboard coolant pump, so no external energy source is required. Building on the success of the Coolant Saver, Wogaard now also produce an Oil Saver for liquids up to 32 centistokes viscosity. This is recommended for sliding head machines and can be used in any application where neat oil is used.

The system RS 6000 is a high-performing recycling system that cleans large oil volumes in several process stages. This system was constructed for many years of reliable work without service. By several process steps such as heating and settling, large amounts of water and dirt are removed. Additionally, the usage of settling technology and a pre-filter increases the service life of the main filter. The RS 6000 can be operated manually, semi- automatic, and fully automatic. It is the ideal recycling system for central treatment of, for example, cutting oil or cooling lubricants. 400 V asynchronous-motor Robust, stable gear pump Free choice of settling- and heating times and the number of filter passes Either manual, semi-automatic, or fully automatic operation Displays for operation- and process status Flow regulation for high viscosity oils Element lifter for fast filter exchange

Our oil reservoir cleaning system M 504 has the capacity of cleaning large oil containers like large tanks and reservoirs, and to store enormous amounts of water and dirt. The M 504 consists of 4 large C-1200 housings and achieves a flow of nearly 300 liter per minute. Due to the large filter elements (1.5 m purely axial flow) this machine is the solution to re-obtain an oil quality in reservoirs in fresh oil condition or better. The M 504 is specified separately for each customer- specific use. It can also be delivered in the mobile version (see figure) if needed. 400 V asynchronous-motor Robust, stable gear pump, 6.5 kW Manometer for flow- and element control Pressure switch for selection setting in unattended operation 24/7 – unattended operation Transfer-circuit Flow regulation for high viscosity oils Element lifter for fast filter exchange Including crane for easy filter exchange

The M 501 is a cleaning system for larger or centrally accruing amounts of oil. It eliminates up to 20 liter water and up to 12 kg particles of dirt with a flow of up to 4.800 liter/hour. The M 501 consists of a large C-1200 housing and carries the oil about 1.5 meter purely axially through the filter elements. This achieves oil purity that can absolutely compete with fresh oil. The M 501 is alternatively also available with two housings and a flow of 9.000 liter for time-critical applications or even larger volumes. 400 V asynchronous-motor, 2 kW power Robust, stable gear pump Manometer for flow- and element control Pressure control for unattended operation 24/7 – unattended operation Transfer-circuit Flow regulation for high viscosity oils Crane and element lifter for fast and easy filter exchange

Our mobile ultra fine filter system M 130 is the flagship among the mobile filter systems. Equipped with a scalper, a (washable) pre-filter for coarse impurities (up to 5 µm, for example swarf), and two C-1000 housings, this system leaves nothing to be desired in order to process technical oils, water-/ oil- or oil-/water emulsions to excellent purities. The scalper and the pre-filter increase the life service of your systems and the filter elements significantly due to the two-stage pre-filtration. This is followed by the oil processing with the reliable ultra fine filter elements which are also used in space travel. You achieve purity values up to NAS 1 (ISO 4406: 13/10/7) and better. 230 V-alternative 400 V motor, robust and reliable Stable gear pump Manometer for flow- and element control Pressure switch for selection setting in unattended operation 24/7 – unattended operation Transfer-circuit Flow regulation for high viscosity oils

Our mobile ultra fine filter system M 120 is the processing machine for larger oil volumes. Its two hard chrome-plated housings can filter up to 2.100 liter per hour of flow. The robust construction, the easy operation, and the possibility of using it in continuous operation without supervision makes it an ideal tool of a preventive maintenance strategy for large units. Even while filling new oil in larger systems it eliminates condensed water and foreign particles reliably. The high flow guarantees a short amortization time due to cost savings in fresh oil, oil changes, and repairs. 230 V-alternative 400 V motor, robust and reliable, stable gear pump Manometer for flow- and element control Pressure switch for selection setting in unattended operation 24/7 – unattended operation Pumping without filtration Flow regulation for high viscosity oils Element lifter for simple and fast element exchange

Our mobile ultra fine filter system M 110 is a processing machine for oils with coarse impurities such as swarf and suspended solids. Equipped with a washable pre-filter, coarse impurities are kept away from the main filter which significantly increases its life service once again. It is constructed very robust and is easy to operate. The vacuum display on the pre-filter enables an unattended continuous operation after switching on. An automatic pressure control and shutdown are also standard equipment of the M 110. In the processing of cutting oils for example, it stands for extremely short amortization times. 230 V-alternative 400 V motor, robust and reliable, stable gear pump Manometer for flow- and element control and for vacuum display in the pre-filter Pressure switch for selection setting in unattended operation 24/7 – unattended operation Pumping without filtration (transfer) Flow regulation for high viscosity oils Element lifter for simple and fast element exchange

Our M 1411 is the ideal machine for processing expensive cutting oils with swarf contamination. It has a pre-filter housing with a metallic screen cylinder and a three-way polypropylene pre-filter. These two pre-filter units work together for retention of coarse impurities such as swarf or larger sand grains. The pre-filter can be used several times. This significantly extends the service life of our filter elements once again, which is already very long. This system is also constructed very solidly, easy to operate, and completes its tasks without supervision. 400 V-asynchronous motor, 0.55 kW, robust construction Stable gear pump, 14 liter/minute Manometer for flow- and element control Robust design, very loadable 24/7 – unattended operation Transfer-circuit Pre-filter selectable from 5 µm – 800 µm Pre-filter can be used several times Also suitable for high viscosity oils 2.50 m flow-/return hose

The M 1401 is the successor of our ultra fine filter system M1001, which has proven itself over a period of many years. The M 1401 is the all-rounder among the mobile filter systems. Equipped with a robust pump unit, a scalper, and our proven hard chrome-plated C-1000 housing, this treatment system is an all-rounder. No matter which technical oil is to be processed, the M 1401 completes its tasks in the factory just as reliable as, for example, in a quarry. It is extremely easy to operate, has selected components from German production, and was very robustly designed. 400 V-asynchronous motor, 0.55 kW, robust construction Stable gear pump, 14 liter/minute Manometer for flow- and element control 24/7 – unattended operation Transfer-circuit Flow regulation for high viscosity oils 2.50 m flow-/return hose Also suitable for high viscosity oils

The M 1201 is identical in construction to our M 1401 except for the power supply. We equip this machine with a 220-volt-asynchronous motor with Steinmetz circuit for high flexibility in places where no 3-phase current is available. This way it can also be operated by a conventional generator in remote locations such as removed brines in quarries. The M 1201 is also very easy to operate, it has selected components made in Germany, and the construction is very stable. We have consciously refrained from any electrical elements due to the usability and the reliability outdoors. 230 V-asynchronous motor, 0.55 kW, robust construction Stable gear pump, 14 liter/minute Manometer for flow- and element control 24/7 – unattended operation Transfer-circuit Flow regulation for high viscosity oils 2.50 m flow-/return hose Also suitable for high viscosity oils

The portable, mobile ultra fine filter system M 121 was especially created for small units and those difficult to access. With the help of this robust design oil changes and the risk of spontaneous breakdowns can significantly be reduced. By using our cost-effective 61 filter elements, high oil purity and the elimination of water in oil is guaranteed, despite low investment costs. As the M 121 is portable, and driven by a 230 V- asynchronous motor, it is the optimal tool for flexible service work. 230 V asynchronous motor, contactless Stable gear pump Manometer for flow- and element control 24/7 – unattended operation Variable pressure regulation Transfer-circuit Flow regulation for high viscosity oils Including 1.5 meter flow-/return hose Easy operation: „plug & clean“

Our C 1000 ES cleans oil in the main flow with the purity of a partial-flow filter. The partial-flow filtration of technical oils is the most effective and cleanest way of filtration. An ordinary main flow filter cannot remove very fine particles from the oil for kinematic and dynamic reasons, because it is exposed to the high pressure of the system. In order to combine the benefit of the main flow filter – mounting in the main flow – with our excellent filter results, we have developed the installation system C 1000 ES. By use of a control block which consists (amongst others) of a pressure reducing valve and a volume flow control, we filter in the main flow with the results, which are even accepted in space travel since many years. Also available in stainless steel or plastic coating Ultra fine filtration in the main flow up to 1 µm particle size System pressure possible up to 360 bar Constructively simple to integrate, because the control block is installed on the housing

Up to 1 µm: Excellent oil purity even surpasses new oil The ultra-fine particle filtration up to NAS 1 (corresponds to ISO 4406: 13/10/7) provides the following benefits: Receives important components of the oil such as additives Absorbs up to 5 liters of water per element Keeps the oil from aging Works against contamination of the system Extends oil change intervals Ensures less failures (i.e. of servo valves) 3 sizes for different requirements C-1000-filter: Maximum service life C-750-filter: Long service life C-500-filter: Low space requirement

Air Filter for Iveco Daily IV / Ecodaily (06-11)-Daily V / Ecodaily (11->) 5801317096

AUDI A1 AUDI A3 LEON GOLF VII

Fiat Egea Y.M 2015

Stal R5 Series Oil Filter

Stal S24/S26 Series Oil Filter

This GlobeCore mobile oil processing unit is designed for degassing, removal of solids and heating of oil for power transformers with voltage up to 1,150 kV. The unit can be used to: (1) heat electrical systems that contain insulating oil with hot oil; (2) for vacuum drying of transformers and (3) for vacuumizing. The unit is best suited to facilities that install, repair and service oil filled electric power transformers and other oil filled electrical equipment. The unit is not certified for use in and around explosive gases, toxic gases or other aggressive environments. When indoors or other enclosed spaces, exhaust gases must be vented to the outside through hoses or pipelines. no need to use adsorbents to dehydrate transformer oil; operation of equipment causes no air pollution or waste requiring storage and disposal; easy to operate and maintain; maximum oil specifications even after one treatment cycle; low power consumption; low noise level;

GlobeCore manufactures oil regeneration systems for both transformer manufacturers and for transformer service providers. GlobeCore units are loaded with a sorbent that captures all oil decomposition products. GlobeCore regeneration systems can use the same sorbent for up to 3 years before the first replacement. No more need for consumables and costly labor related to replacement of exhausted sorbent on the job site. Regeneration systems can be combined with degassing units or can be purchased as stand-alone systems. GlobeCore regeneration systems can be used in combination with your existing degassing or drying unit. Each GlobeCore unit can be customized and includes a number of options: An extra vacuum pump assembly for transformer vacuuming Mounted on a trailer or a semi-trailer Inlet and/or outlet moisture meters for the oil stream Remote control and process monitoring via smartphone or PC Climate Controlled Operator work room.