Stainless steel connections - Import export

- Metric thread - Chambered O-ring - Seals FPM - Material AISI 304/ 304L (1.4301 / 1.4307) - Temperature range -4 to 248 °F (-20 to +120 °C) - Working pressure range -14 to 348 psi (-0.95 to 24 bar) - Not designed for steady motion of the tube

— plug-in coding: round, triangular, hexagon, octagon — Fool-proof coding — 1.4404 (316L) / 1.4571 (316Ti) stainless steel — Seals: low temperature -50°C to 200°C (red) FDA — working pressure 0,5 bis 10 bar — With shut-off function — Suitable for compressed air

- Seals FPM - Material AISI 304/ 304L (1.4301 / 1.4307) - Temperature range -4 to 248 °F (-20 to +120 °C) - Working pressure range -14 to 348 psi (-0.95 to 24 bar)

NEMS electrical insulation insert is a one-piece pipe product serves to protect the pipeline from electrochemical corrosion in areas affected by stray currents. Installed -at the boundaries of sections of electrochemical protection of pipelines -on the borders of property plots -at the boundaries of pipeline sections with different types and quality of protective coatings or a significant change in the specific electrical resistance of the soil -for electrical separation of aboveground sections of pipelines with a length of more than 1000 m from underground sections -a method for identifying pipeline sections that are affected by stray currents, as well as inductive AC guidance -at integrated gas and oil treatment plants, booster compressor stations or tank farms Advantages -Withstand heavy mechanical loads -The service life corresponds to the service life of the gas pipeline -Installed on all categories of gas pipelines -Operating temperature +150 C and above

This is a welded pipe made of stainless steel,mainly used for connect both of the two sides od the products.

The tension and compression load cell model 8435 enables universal and fast installation, requires hardly any installation space and upgrades with technical data that are readily achieved by larger sensors. Due to its excellent price-performance ratio with regard to its mechanical and electrical data, the force sensor finds its place in products that are also manufactured in larger quantities and calculated with a small budget. This model of load cell uses proven strain gage technology to perform measurements. Strain gages are applied to the sensitive element and connected to form a full bridge. FEATURES Measuring ranges from 0 ... 200 N up to 0 ... 5000 N Small dimensions Inexpensive execution Stable anti-kink protection Made of high quality stainless steel Connecting cable suitable for drag chains burster TEDS optionally available

Lubrication of highly stressed sliding surfaces, especially at low slip speeds or with oscillating movements, for example with screwed, mating or bayonet connections made of high-alloy steel or non-ferrous metals Surface separation of temperature-stressed threaded connections, for example at combustion engines and turbines Corrosion protection at screws, pins, bolts, flanges, spindles and fits For stainless-steel connections Advantages and benefits Economic product solution for users who previously used a wide variety of pastes Resistant to hot and cold water and also to most acids and lyes Excellent corrosion protection Contains Moₓ-Active for increased performance Metal-free Also available as spray version OKS 2501

Lubrication of all kinds of highly stressed sliding surfaces, especially at low slip speeds or with oscillating movements Surface separation of temperature-stressed threaded connections For stainless-steel connections Advantages and benefits Broad field of application Good wear and corrosion protection Prevents burning-on and cold welding Good pressure absorption capacity No classification marks according to (EG) No. 1272/2008 Prolonged lubrication effect Metal-free For best adhesion, clean contamination and other lubricants from thread and slide surfaces. Best way is to clean mechanically first (for example, with a wire brush) and then with OKS 2610/OKS 2611 universal cleaning agent. Use a brush, spatula or similar to apply evenly a suitable quantity of paste to the head or nut contact surface and to the thread. The paste also acts as a sealant against spray water and condensate. Do not use paste instead of grease and mix only with suitable lubricants.

Lubrication of highly stressed sliding surfaces, especially at low slip speeds or with oscillating movements, for example with screwed, mating or bayonet connections made of high-alloy steel or non-ferrous metals Surface separation of temperature-stressed threaded connections, for example at combustion engines and turbines Corrosion protection at screws, pins, bolts, flanges, spindles and fits For stainless-steel connections Advantages and benefits Economic product solution for users who previously used a wide variety of pastes Resistant to hot and cold water and also to most acids and lyes Excellent corrosion protection Contains Moₓ-Active for increased performance Metal-free Also available as spray version OKS 2501 NSF H2 registered To achieve optimal adhesion remove soiling as well as other lubricants from the thread and sliding surfaces. Use a brush, spatula or similar to apply sufficient OKS 250

Screw-in heaters are versatile and intended for heating liquid media in industrial and commercial applications. When selecting, the specific surface load permitted for the respective medium must be observed and checked by the customer. EHK G1 1/2 are mainly used to heat water and aqueous solutions. 3 tubular heating elements ø 8,5mm made of stainless steel 1.4404 resp. Incoloy 825 brazed in G1 1/2″ thread made of brass (lead free) or stainless steel. Connection to 230/400 V3 (N), rotatable stainless steel terminal box. Use e.g. in washing machines, dishwashers, tempering equipment, laboratory equipment. The heaters are also suitable for water heating with photovoltaics, primarily the EHK G1128xxx series. Combination with all common PV controls possible, stepless power output. Type EHK G112-A with built-in thermostat 0-95°C Type EHK G112-AB with built-in thermostat/limiter 30-80°C / 100°C Type EHK G112-U without integrated control unit

BO-QA Clamping bushings Pulleys can be fastened to cylindrical shafts or journals safely, flexibly and, above all, economically with BOQA clamping bushings. Shaft-to-hub connections with BOQA fastening elements are: SAFE - non-positive, backlash-free and highly precise fastening of pulleys FAST - marked gain in time needed for assembly FLEXIBLE - wide range of applicability, high delivery standard ECONOMICAL - reduction in costs SPACE-SAVING - extremely compact, no overhang NON-CORROSIVE - made predominantly of stainless steel Shaft-to-hub connections with BOQA fastening elements are insensitive to extreme load alternations. They can be easily adjusted axially and radially, are easy to mount and dismount. Any additional forming of the shaft or other adjustment work will not be necessary.

This single coil induction cap sealer offers users increased productivity, an easier set-up and more control. The easy-to-use touch screen is available in multiple languages. The Super Seal™ Touch is our most powerful compact single-coil machine and is designed for production lines running at up to 40 metres per minute. The air-cooled power pack is separate from the induction sealing coil. • Pre-programmed and fully integrated touch screen control for inspection and rejection • Remote start/stop and remote power control (auto start function available) • Password protection with operator lockout • High and low level set power alarm • Recipe management • Internal monitoring of all critical operating data • Diagnostic system information • Internal USB data port – Network connectivity available • Stainless steel IP55 enclosure • Robust stainless steel fully adjustable stand for different container heights • Seals a variety of caps ranging from 20mm – 150mm

▪ Hygienic design for food, cosmetic and pharmaceutical applications ▪ Easy integration into automated processes due to compact design ▪ Length and weight savings compared to existing pumps ▪ Short cycle times ▪ Non-destructive dosing of solid containing materials with diameter of up to 20 mm ▪ Volumetric dosing and filling, regardless of viscosity ▪ For low to high viscosity materials ▪ Long service life even with abrasive and shear sensitive materials ▪ Continuous dosing, pulsation free ▪ Precise filling with high repeatability ▪ Linear relation between dosing volume and rotational speed ▪ Programmable suck-back prevents dripping or stringing of product ▪ FDA compliant elastomers ▪ Wetted components are autoclavable ▪ Stainless steel ▪ Optional flushing connection for optimum results with CIP ▪ Easy cleaning and maintenance due to quick assembly and disassembly options

Load capacity: Class A (15kN test load) EN 124 Materials: Frame in extruded aluminium. Cover in extruded aluminium bonded to a composite aluminium honeycomb panel (with a white coating). Stainless steel screw connections. EPDM seal. High-quality gas-lift struts. Features: Modern lightweight-construction access cover with maximum ease of opening. Major weight-savings compared to concrete-filled access covers. Extremely easy to open thanks to gas-lift struts. A safety device is fitted, locking the cover in the raised position. As the cover is not filled with concrete, installation is quicker and simpler. There is a recess of 24mm for laying slabs, tiles, parquet etc. In the case of thin tiles, the difference in height can be compensated for by using a suitable tile adhesive (MAPEI Keralastic) and waterproof building board. Sealed design with a very high-quality finish. Very attractive surface, particularly the visible edges. Inconspicuous corner joints make it easy to connect...

Load capacity: Class A (15kN test load) EN 124 Materials: Frame in extruded aluminium. Cover in extruded aluminium bonded to a composite aluminium honeycomb panel (with a white coating). Stainless steel screw connections. EPDM seal Features: modern lightweight-construction access cover. Major weight-savings compared to concrete-filled access covers. The cover is lifted by the hinge, significantly reducing the effort required. A safety device is fitted, locking the cover in the raised position. As the cover is not filled with concrete, installation is quicker and simpler. There is a recess of 24mm for laying slabs, tiles, parquet etc. In the case of thin tiles, the difference in height can be compensated for by using a suitable tile adhesive (MAPEI Keralastic) and waterproof building board. Sealed design with a very high-quality finish. Very attractive surface, particularly the visible edges. Inconspicuous corner joints make it easy to connect tiles, slabs etc. Opening with the...

Load capacity: Class A (15kN test load) EN 124 Materials: Frame in extruded aluminium. Cover in extruded aluminium bonded to a composite aluminium honeycomb panel (with a white coating). Stainless steel screw connections. EPDM sealing Features: Modern lightweight-construction access cover. Major weight-savings compared to concrete-filled access covers. Opening the light cover couldn’t be easier. As the cover is not filled with concrete, installation is quicker and simpler. There is a recess of 24mm for laying slabs, tiles, parquet etc. In the case of thin tiles, the difference in height can be compensated for by using a suitable tile adhesive (MAPEI Keralastic) and waterproof building board. Sealed design with a very high-quality finish. Very attractive surface, particularly the visible edges. Inconspicuous corner joints make it easy to connect tiles, slabs etc. Opening with the Lift-Off System: As a cover inside buildings (pedestrian traffic only), which can be opened by 1-2...

Combics provides support in all areas of your process chain, from manual formulations up to PC- controlled production checks. The modular system allows tailor-made configuration of the individual components for each area. We also produce individual complete solutions according to your specific applications. For use in explosive areas (certificates: IECEx \ ATEX Zone 1 \ 2 \ 21 \ 22 and FM Class I, II, III Div. 1) LCD display, 20mm, 14 segments, 7 digit weight value with status information, back lit Housing in stainless steel, IP69K Scale connection for analogue Ex platforms, as e. g. Combics Ex, IU EX, IF EX or Ex load cells. Optional also digital IS Scales (xBPI) Internal alibi memory Serial interface RS232 \ 485 \ 422 Div. power supplies available, also battery pack Fieldbus Profibus DP and 4 ... 20 mA interface

* Material : ABS, Stainless Steel * Size: 6.7cm* 4.3cm * Thread: connect with the 13.5mm soft pipe * Weight : 11g

TAWI vacuum systems and accessories approved for ATEX use are manufactured in stainless steel and are connected with ground/earth wires to make sure no static electricity can create an ignition. Contact us and get expert advice for your specific ATEX requirements. Complete solutions for ATEX zone 1 & 21 and zone 2 & 22 ATEX specific vacuum pumps or ejector pumps Lift systems handling various loads up to 135 kg ATEX adapted jib cranes and crane systems High speed lifting equipment Standard, fixed and flex handles for optimal ergonomics

PLI7 series projector, with a modular design for thermal performance superior and controlled. Large PCB with dissipation envelope throughout the contact surface. Optical group separated and isolated from the module's drivers, with stainless steel screws and quality waterproof connections. The implementation of 1301m / W SMD LED t echnology with the use of Specialized lenses is suitable for long distances. NF2L757DR Japanese technology of high power and durable. The selection of the ideal product is essential to obtain the best financial result, and excellent lighting comfort in the medium and long term.

Have a level control that ensures that the test medium is topped up automatically It has overtemperature shutdown separate control circuit The special cir­cu­la­tion system guarantees high accuracy and uniform temperature distribution. The double insulation of the bath walls Special seals keep steam in the test bath Pneumatic operated doors Quickrelease couplings connections inside the bath Highquality stainless steel SS304 Option to connect a chiller for 20C tests Easy connection to pressure test units

More info More info More info More info More info 40bar PET Compressors Select the machine The AF 40 bar Piston Oil Free PET compressor Package Turn-key installations designed to meet the most stringent standards and conditions to ensure round-the-clock operation. Complete solutions from 225 to 3200 m³/H, electric motors from 45 to 550 kW. Features Benefits Intercoolers and separators Features Hot galvanized connection piping to aftercooler inlet. Air temperature indicator on connection piping. Spring loaded safety valve on separator upper head. Air pressure indicator on separator body. Air temperature indicator on separator body. Drain valve and automatic condensate trap on separator lower head. Benefits Optimized compressed Air Quality maximum. Cooling Efficiency at each compression stage. Air Dryer Features Stainless steel flexible connections from the galvanized air receiver to the 40 bar air dryer. Stainless steel dryer with integrated 1 micron filter, dew point alarm...

STANDARD USA ACQUASTOP SINGLE-LEVER HAIRDRESSER WITH IAPMO APPROVAL Stainless steel supply hoses, connection F. 9/16” NPT Flexible gray PVC 45 cm Chromed shower with ACQUASTOP Double non-return valve

SINGLE-LEVER HAIRDRESSER TAP WITH IAPMO APPROVAL Stainless steel supply hoses, connection F. 9/16” NPT Flexible gray PVC 120 cm Chromed shower mechanical stop Double non-return valve

Material Stainless Steel V4A (AISI 316) Surface Finishing - Standard Seal Material(s) FKM (Viton®) Working Temperature -25° C ... +200° C / -13° F ... +392° F Valve Design Flat Face Connection Push Disconnection Actuate Push Sleeve Connect Under Pressure not allowed Application Offshore ISO Interchange -

Material Stainless Steel V4A (AISI 316) Surface Finishing - Standard Seal Material(s) FKM (Viton®) Working Temperature -25° C ... +200° C / -13° F ... +392° F Valve Design Poppet Valve Connection Push and actuate Push Sleeve Disconnection Actuate Push Sleeve Connect Under Pressure not allowed Application Industrial Hydraulic ISO Interchange ISO 7241-1, Series B

Material Stainless Steel V4A (AISI 316) Surface Finishing - Standard Seal Material(s) FKM (Viton®) Working Temperature -25° C ... +200° C / -13° F ... +392° F Valve Design Poppet Valve Connection Screw Disconnection Screw Connect Under Pressure Male Tip and Female Body allowed Application Industrial Hydraulic, Offshore, Rescue and Tensioning Hydraulics ISO Interchange -

Material Stainless Steel V4A (AISI 316) Surface Finishing - Standard Seal Material(s) FKM (Viton®) Working Temperature -25° C ... +200° C / -13° F ... +392° F Valve Design Poppet Valve Connection Screw Disconnection Screw Connect Under Pressure Male Tip/Female Body up to 33% of the Working Pressure with Tools Application Agricultural and Forestry Machinery, Construction Machinery, Industrial Hydraulic ISO Interchange ISO 14541 (BG 1-6)