Modulator - Import export

Fast and compact flow module, suitable for gas dosing systems, manifolds and analysers. Easy to integrate with compact design, factory calibration and pins for HW address setting This module is also available with different flow rate ranges: +/- 200 sccm: > request product now +/- 50 sccm: > request product now

Digital (I2C) module for relative humidity and temperature designed for excellent reproducibility and response time required in meteorological balloons and drones. Extra fast measurement. Suitable for operation measurement down to -80 °C.

Mechanically robust and with a chemical and condensed waterproof sensing area, the digital IST AG HYT humidity modules offer a wide application window and an optimal price-performance ratio. Precisely calibrated, the HYT modules deliver an outstanding accuracy and excellent long-term stability even at high humidity - ideal for sophisticated mass applications, industrial handheld devices and precise humidity transmitters. Advantages of the HYT 221 digital humidity module include: — Calibrated and temperature compensated — Excellent humidity/temperature accuracy and stability — High chemical resistance — I2C protocol (address 0x28 or alternative address) — Wide humidity and temperature range (0 % RH to 100 % RH and -40 °C to +125 °C) — Very low drift — Very stable at high humidity — Interchangeable without adjustments

Mechanically robust and with a chemical and condensed waterproof sensing area, the digital IST AG HYT humidity modules offer a wide application window and an optimal price-performance ratio. Precisely calibrated, the HYT modules deliver an outstanding accuracy and excellent long-term stability even at high humidity - ideal for sophisticated mass applications, industrial handheld devices and precise humidity transmitters. Further advantages of the HYT 939 digital humidity module include: — Calibrated and temperature compensated — Excellent humidity/temperature accuracy and stability — High chemical resistance — I2C protocol (address 0x28 or alternative address) — Wide humidity and temperature range (0 % RH to 100 % RH and -40 °C to +125 °C) — Very low drift — Very stable at high humidity — Interchangeable without adjustments — Pressure-resistant version (up to 16 bar) upon request

Suitable for a wide variety of applications from cooling circuits, dosing pumps, white goods, CIP systems for food industry, agricultural machines, industrial wet vacuum cleaners, to gear oil used in metalworking and mining, IST AG's new thermal OOL mass flow meter can be easily integrated into new or existing industrial systems. Its robust housing contains IST AG's well-established OOL technology that makes the corrosion resistant thermal mass flow ideal for flow monitoring of aqueous solutions, alcohols and oils, including aggressive liquids. Further features include: Calibration range: 1-200 kg/h Temperature compensated: from +5 °C to +50 °C Fluidic connection: tubing with 4 mm inner diameter Flow channel inner dimensions: 3.7 mm Single wetted material: stainless steel 1.4301 Response time t63: 0.5 seconds

Mechanically robust and with a chemical and condensed waterproof sensing area, the digital IST AG HYT humidity modules offer a wide application window and an optimal price-performance ratio. Precisely calibrated, the HYT modules deliver an outstanding accuracy and excellent long-term stability even at high humidity - ideal for sophisticated mass applications, industrial handheld devices and precise humidity transmitters. Advantages of the HYT 271 digital humidity module include: — Calibrated and temperature compensated — Fast response time — Excellent humidity/temperature accuracy and stability — High chemical resistance — Wide humidity and temperature range (0 % RH to 100 % RH and -40 °C to +125 °C) — Very low drift — I2C protocol (address 0x28 or alternative address) — Very stable at high humidity — Interchangeable without adjustment

The small testing machine can be used economically for vibrating small fracture mechanics samples or for quality monitoring of small parts during production. Because of the small footprint, the machine can also be used in "hot cells". With simple additions, the machine can then be operated with a manipulator.

Ohmic heating is a gentle, continuous process for heating of products, especially for products to keep their lumpiness, such as fruits, vegetables, spices, and other foodstuffs. Heating occurs via electricity, whereby the product functions as electrical resistor. Compared to the conventional cooking methods, the product is not heated over a hot surface, but, rather, uniformly over the entire cross-section. Using the hot-cold water systems is greatly beneficial, for generating energy efficiency as well as for enhancing process control with respect to the direct use of steam as heating medium. Especially in horizontal mixing systems, hot-cold water systems offer optimal conditions for realising the highest product quality and for preserving the lumpiness of the products. The automatic snap-closing manway is excellently suited to facilitate the frequent opening and closing processes. Owing to the heat and humidity, it is critical to add the additives in the cooking apparatuses through sta

UL1642, UL2054, UN38.3, CE, IEC62133 test report approvals Solutions for wall mounted, rack mount, telecom, solar, UPS, and motive batteries Popular in global markets for telecommunication, solar, medical, IoT, electric vehicles, and automation High-performing and dependable power source for all your needs.

Choke module with 3 linear storage chokes to increase terminal inductance. Inductance: 3 x 0.25 mH Nominal current: 5 A Dimensions: 90 x 70 x 49 mm Connectors:3-pole circuit board terminals (pitch 5 mm)

The EPOS2 Module 36/2 is an OEM positioning controller plug-in module for brushed DC motors with encoder or brushless EC motors with Hall sensors and encoder up to 72 watts.

The WirelessHART Adapter SWA70 is an interface module for the wireless transmission of 4 to 20 mA/HART signals from connected field devices to a WirelessHART Fieldgate. It is powered by either a battery pack or power supply units. The WirelessHART Adapter can be used in hazardous and non-hazardous area for applications.

Different sizes and variations available.

More on our general catalogue.

One single MiniFEB (Front End Board) allows the operation of 3 sensors parallel. The MiniFEB has an TCP/IP output protocol and can be used for many channel systems by combining with a switch. A backplane can be used for power supply and synchronisation of all MiniFEB boards. Pricing may vary depending on requested cable length and available power source.

The elmor CX counter module is mostly used as dosing unit on packaging machines. The open constructed counting head has a narrow width. Thus, multihead dosing systems can be realized easily also in tight spaces. The CX counter module consists of two parts: the counting head with conveying unit and sensor and the control unit. The control unit of the CX counting module is completely remote controlled via a PLC. The technical data of the CX counter module are quite similar to the data of our C1 seed counter. Example: Dosing module with 4 counter heads Multihead seed counter using the elmor CX With courtesy of: Tempel Verpakkingstechniek (NL) For more information please contact: info@vandertempel.nl Technical data Countable parts: 0.2 to 18 mm in diameter Cylindrical parts up to 20 mm length All sizes are counted with the same adjustable conveyor bowl; for parts with extreme shapes or sizes the sorting element can be customized The conveying speed can slow down automatically shortly before reaching the desired amount to achieve a high dosing accuracy. Spherical parts of 2 mm diameter have the following performance values: Counting speed around 50,000 pieces per hour Counting error: 1 per thousand or less The counting range and the count modes are determined by the PLC Conveyor bowls The parts to be counted are transported in a vibrating conveyor and are singularised by means of a sorting element. Both the conveyor bowl as well as the sorting element can be selected among different variants , depending on the properties of the product to be counted. A) Standard conveyor bowl made of anodised Aluminium with universal – sorting element FS0. FS0 is manually adjustable for all part sizes from 0.1 to 18 mm in diameter. B) Special sorting elements instead of FS0: FS1, manually adjustable, optimised for cereals, rice, paddy and products of similar shape and size FS2: manually adjustable, optimised for corn, soybeans, peas, beans and products with similar shape and size FS3: fine-drive adjustable in height and width, for very flat seeds or flat mechanical parts with the following dimensions: width: 0.5 to 10 mm, height: 0.5 – 8 mm, maximum length: 20 mm C) Special conveyor bowl with additional lateral opening for mechanically eliminating of accompanying substances, suitable for corn, cereals, soybean, paddy, etc. The height of this opening can be adjusted from 0 to 5 mm and allows unwanted accompanying substances laterally be sorted out. Not suitable for parts smaller than 1 mm in diameter. Can be used with sorting elements FS0, FS1, FS2, or FS3 combined. D) To meet the needs of various industries, the conveyor bowls can be made ​​of other materials . These bowls are for example extremely impact resistant or correspond to the rules of the FDA, etc. Such trays can be made ​​from various basic materials like Titanium, PEEK, Polyamide and others. E) The standard aluminum bowls can be treated or coated in order to satisfy specific requirements. With increased mechanical stress or when in contact with food, the surface can be hard anodized. A hard coating of nickel has a high surface hardness and is FDA approved, Polyurethane (PU) coating permits rapid transport of heavy mechanical parts and prevents noise and wear. Again, FDA approved materials can be used. F) Feeder Bowl with vertical outlet: Short cycle times are possible, as the seeds leave the bowl after a short run time. Advantageous when many different lots must be processed, often used for the fast 1000 grain weight measurement. Used for seeds which can be easily singularised like Crop, Soy, Corn, Canola etc. The seeds should have a diameter of 2 mm or more. Volume 0.8 litres, or about 2500 kernels of Corn. Feeding Conveyor elmor 610 Feeding conveyor and storage hopper for automatic refilling of the conveyor bowl of the counting machine elmor CX elmor Green Design Our label for: high energy efficiency longevity no standby power loss most components may be recycled production without solvents, ROHS conformity

Make your own dedicated fixture

Standalone version of the IMCU including: 1. power supply (DC/DC converters), global protection and management 2. power amplifier directly controlled by DSP providing a large configuration, protection and measurement possibility 3. Optimal control in relation with EMC and efficiency 4. Specific for each application mezzanine board to interface applied position sensor devices s LVDT, resolver, incremental etc. 5. Possible implementation on the CAN bus 6. Internet/WiFi/Bluetooth user's interface based on the Raspberry module 7. Implemented open source firmware 8. Possibilities to direct programing implemented DSP from Simulink@ model