Cables & networks - Import export

'Findme' - Clever and Accurate of Smart Location Tracker An intelligent location tracking device that sends and receives GPS locations using the LPWAN network. It can be used for various purposes, from vehicle or motorcycle location control to check the location of children and dementia patients. Also, it provides living safety services through emergency notification (SOS) functions. Product Specification Product Name: Findme Model Name: WAYBLE-FM100 Size: W 85mm x D 55mm x H 21mm Weight: 67g Input Power: Lithium Polymer 1300mAh 3.7v Frequency Band: LTE Cat.M1 B5 Charging terminal: Micro USB-C Type Usage time: About 2 days when fully charged (depending on charging and usage environment) Manufacturer and Country: DAEHO I&T Co., Ltd. / Republic of Korea Our Company Daeho I&T Co., Ltd. is a company specializing in ICT and nano SiC fiber heating technology that provides building central control solutions, IoT smart solutions, and nano SiC fiber heating solutions.

Designed specifically for servicemen of telecommunications companies. The product consists of four compartments: In the first large compartment there are compartments in which the following items can be placed: laptop, charger, folder, with documents, cables. In the second middle compartment there is a pouch with tools. In the pouch, you can place: connector crimping tool, flat, cross-head screwdrivers, stationery knife, wire cutters, a hammer, pliers, electrical tape/zip ties, RG45 connectors, Scotchloks. In the third middle compartment there is a pouch with compartments for items: measuring device, organizer with consumables, test tube, Tone Generator, Multimeter. The fourth small compartment can include: splitters, RJ45/RJ11 sockets, stock of Scotchlocks, stock of clamps, The backpack is designed specifically for servicemen of telecommunications companies.

It is applied for laying trunk and subscribers cable lines indoor. Its specific feature is round design and aesthetic appearance. Cable lines are laid via the duct slot. The cable tray has technological parts for fixing it to the wall.

Designed for installation in hallways and staircases. Is used for PON networks in apartment buildings. The cabinet can accommodate: – a removable panel for optical terminal boxes or an optical cassette type PLC splitter (130x100x25 mm). – box-type optical coupler (90*20*10) – 2 pcs. – 4 optical adapters SC type. No FOCL welding is required. Up to 8 pcs. of cable slack max 30 cm.

Is used for backbone FOCL supports as a supplemental fastening. This mount is sliding, which can significantly accelerate the installation of a cable line. This mount is multi-purpose and does not depend on cable diameter.

Is used for backbone and subscriber FOCL supports as a bracket for an optical distribution box type SNR-FTTH-FDB-24A. This bracket allows storing a cable slack in a coil Ø350 mm in the space between the bracket and the support body.

Is used for backbone and subscriber FOCL supports as a loop fastening for vertical and horizontal cable installation along the support. Replacement of UK-P-(Sh)

Is used for backbone and subscriber FOCLs as an addition to UK-N/U Multi Mounting Unit 150mm extension (for reinforced-concrete supports) when a FOC needs to be mounted on a support. Provides 150 mm FOC projection from the support.

It is applied as an anchor fastening for trunk and subscriber lines, providing offset up to 150 mm between the fixing point of the optical fibre transmission line and the support body. This fastening unit can be fitted with the "installation bracket for the optical distribution cabinet with 150 mm offset (on SV support)" for further placement of the distribution optical cabinet.

It is applied as anchor fastening for trunk and subscriber optical fibre transmission lines

SC/APC type PON connector

Cable TV 1xRF output, SC/APC type PON connector, Broadcast storm control, ACL access control

Used for PON station equipment with capacity up to 32 ports, its power supply equipment and backup equipment united in one node. It is possible to install up to 9U active and passive equipment in the top part of the cabinet.

The design includes a box for connecting FTP and standard camera wires as well as a bracket for attaching input cable. The camcorder is attached directly to the box with self-tapping screws.

The cabinet can accommodate: – a removable panel for optical terminal boxes or an optical cassette type PLC splitter (130x100x25 mm). – box-type optical coupler (90*20*10) – 2 pcs. – 4 optical adapters SC type. No FOCL welding is required. Up to 8 pcs. of cable slack max 30 cm.

Sharpey is fastened with dowels and screws directly to the wall in the communal stairwell. According to Ufanet standard, no more than 10 SM-1 cables are installed inside the cabinet.

It is applied for laying trunk and subscribers cable lines indoor. Its specific feature is round design and aesthetic appearance. Cable lines are laid via the duct slot. The cable tray has technological parts for fixing it to the wall.

Fastening unit is applied as an anchoring and supporting fastener in private houses during installation of the trunk and subscriber optical fibre transmission lines. Installation: The part is fastened to the support with the mounting band (2 pcs.)

The patch cord is designed for indoor installation during connection of the subscribers. Description: Optical patch cord made of DROP cable for indoor application. White cable jacket is resistant to temperature drops. Network construction using patch-cords: - Quick and easy installation - Minimum welding - High connection speed - Easy operation -Aesthetics 1SM SC/APC-SC/APC 5m/10m/15m

The patch cord is designed to be suspended at the overhead line supports during installation of the trunk line, and to connect subscribers. Description: Optical patch cord made of DROP cable for outdoor application. Black cable jacket is resistant to temperature drops. Network construction using patch-cords: - Quick and easy installation - Minimum welding - High connection speed - Easy operation

Optical patch cord made of DROP cable for outdoor application. Black cable jacket is resistant to temperature drops. Cable lengths are made according to customer's request. Network construction using patch-cords: - Quick and easy installation - Minimum welding - High connection speed - Easy operation - Aesthetics

Semicircular metal duct is used to protect cable lines running both inside and outside buildings. Mounting to the wall is carried out using dowel nails or a mounting gun. Installation: It is fixed to the wall using dowel nails or powder-actuated fastening tool.

Metal triangular duct is applied to protect cable lines both indoors and outdoors. Installation: it is fixed to the wall using dowel nails or powder-actuated fastening tool.

Cable tray Unicor applied for laying trunk and subscribers cable lines. Its specific feature is absence of the cover, cable lines are laid via the duct slot. The cable tray has technological parts for fixing it to the wall. The cable tray has the Fire Safety Certificate.