Fire%20protection - Import export

Over the last two decades IGNIS has been used in many tunnels, primarily to provide passive fire resistance to the concrete structure, whether this is a segmental tunnel lining, sprayed or cast in-situ concrete.

Multilayer refractory construction core based on rock wool and inorganic impregnation matrix for the production of fire-resistant building structures. ✓ 100% natural and inert ✓ non-flammable, according to IMO 2010 FTP Code Part 1, DIN EN 13501 ✓ meets the requirements of the RAL quality mark certification ✓ heat- and sound-insulating ✓ pressure resistant ✓ water-repellent ✓ dimensionally stable with temperature changes ✓ recyclable

Water-based one-component fire protection impregnation for wood and wood products and building elements with antibacterial and fungicidal properties for interior and exterior use — antibacterial, with fungicidal effect — inorganic — non-combustible — non-toxic — temperature resistant (after drying out) — environmentally safe — high adhesive properties

This hightech membrane is suitable for full fire protection and stopping as well as smoke, with extended performance for higher temperatures, strength and flex performance.

With our product range of solidian PROTECT A1 membranes, we provide architects and planners with important components to realize their ideas and build safely. This protection membrane is certified to building material class A1 and therefore classified as noncombustible to EN 135011 reaction to fire. nonflammable fabric made of glass or basalt excellent solar and glare control characteristics maintenancefree weatherproof water repellent UV Protection

Cost-effective solution for fire-protected shaft walls - With peripheral lip seal (silicone) against smoke penetration - Quick and easy installation. Fire resistance on duct side and room side NF EN 1634-1 : +A1 : 2018 The inspection hatch is specially designed for installation on technical ducts with one of the requirements "external and internal heat load of the duct" and a fire resistance class EI 30. It offers a safe protection against the spread of fire from a room into the duct or counteracts it. The aluminium mounting frame is equipped with a fire protection strip. The cover of the inspection hatch is filled with DF fire protection plates and protected against the passage of smoke by a four-sided circumferential seal. The cover is secured on both sides by self-adjusting safety arms. These safety arms ensure that the cover stops every time the door is opened. The cover can be easily removed and replaced

Frame made of aluminium profile bars connected by "Tox" connections - Intumescent gas, smoke and flame tight seal in case of fire - Restraint security - Hidden latches - Screwed GKF gypsum plasterboards - Quick and easy installation The 60-minute ceiling fire dampers are designed for installation in false ceilings for self-contained fire protection, one of the requirements being "combustible load only on the room side" and the fire resistance class being EI 60. They provide effective protection against fire progression from the room into the false ceiling area. The integrated aluminium frame is equipped with a fire stop. The cover of the inspection hatch is fitted with a DF fire protection plate and protected against smoke entry by a versatile all-round seal. The cover is secured on both sides by automatic safety hooking arms. The safety catching arms ensure that the lid is intercepted every time the hatch is opened. The lid is easy to remove and replace.

Frame made of aluminium profile bars connected by "Tox" connections - All-round EPDM lip seal - Restraint security - Hidden latches - Screwed GKF gypsum plasterboard Tested for fire resistance from underneath (room side) NF EN 1634-1: +A1: 2018EN 1634-1: +A1: 2018 Fire dampers EI 60 are designed to be installed in false ceilings for self-contained fire protection, one of the requirements being "combustible load only on the room side" and the fire resistance class being EI 60. They provide effective protection against the progression of fire from the room into the false ceiling area. The integrated aluminium frame is equipped with a fire stop. The cover of the inspection hatch is fitted with a DF fire protection plate and protected against smoke entry by a versatile all-round seal. The cover is secured on both sides by automatic safety hooking arms.

Frame made of aluminium profile bars connected by "Tox" connections - All-round EPDM lip seal - Restraint security - Hidden latches - Screwed GKF gypsum plasterboards Tested for fire resistance from underneath (room side) NF EN 1634-1: +A1: 2018 Fire dampers EI 120 are designed to be installed in false ceilings for self-contained fire protection, one of the requirements being "combustible load only on the room side" and the fire resistance class being EI 120. They provide effective protection against the progression of fire from the room into the false ceiling area. The integrated aluminium frame is equipped with a fire stop. The cover of the inspection hatch is fitted with a DF fire protection plate and protected against smoke entry by a versatile all-round seal. The cover is secured on both sides by automatic safety hooking arms.

Frame made of aluminium profile bars connected by "Tox" connections - All-round EPDM lip seal - Restraint security - Hidden latches - Screwed GKF gypsum plasterboards Tested for fire resistance from underneath (room side) NF EN 1634-1 : +A1 : 2018 Fire dampers EI 90 are designed to be installed in false ceilings for self-contained fire protection, one of the requirements being "combustible load only on the room side" and the fire resistance class being EI 90. They provide effective protection against the progression of fire from the room into the false ceiling area. The integrated aluminium frame is equipped with a fire stop. The cover of the inspection hatch is fitted with a DF fire protection plate and protected against smoke entry by a versatile all-round seal. The cover is secured on both sides by automatic safety hooking arms.

Frame made of aluminium profile bars connected by "Tox" connections - All-round EPDM lip seal - Restraint security - Hidden latches - Screwed GKF gypsum plasterboards Tested for fire resistance from underneath (room side) NF EN 1634-1 : +A1 : 2018 Fire dampers EI 30 are designed to be installed in false ceilings for self-contained fire protection, one of the requirements being "combustible load only on the room side" and the fire resistance class being EI 30. They provide effective protection against the progression of fire from the room into the false ceiling area. The integrated aluminium frame is equipped with a fire stop. The cover of the inspection hatch is fitted with a DF fire protection plate and protected against smoke entry by a versatile all-round seal. The cover is secured on both sides by automatic safety hooking arms.

Door for technical ducts - White lacquered RAL 9016. - Non-detachable leaf - Left or right hand installation - Leaf with fire protection SOFTLINE 60 minutes fire resistant inspection hatches are specially designed to be integrated into the walls of technical ducts with a minimum thickness of 25 mm and meet the requirements of fire resistance class EI 60. They provide protection or an obstacle to the spread of fire from a room into the duct. The metal surface of the powder-coated frame hides the opening in the wall, providing a harmonious appearance. The lockable square key lock prevents opening by unauthorized persons. CSTB certified, PV No. RS-19-067. Customized dimensions on request within the maximum dimension allowed by the PV. Sizes: 2 plates of 12.5mm - Certificate EI 60 200x200 300x300 400x400 500x500 600x600

iglidur® G V0 - polymer plain bearings with UL94 V0 rating V0 classification iaw. UL94, universal. The new material attains the V0 classification in accordance with UL94, making it ideally suited for applications with elevated fire protection requirements (vehicle interiors, aerospace, building technology, etc.). Other properties are similar to our allrounder iglidur® G. Lubricant- and mainteance-free V0 classification pursuant to UL94 high wear-resistance Universal applicability

The purpose of fire compartmentation is to to prevent the spread of fire to or from another part of the same building or an adjoining building. The compartment wall seperate the fire risk areas in a building (low, medium and high risk). The higher the fire risk in the area, the more fire resistant the compartment (30 minutes, 60 minutes, 90 minutes or 120 minutes). It also depends on the type of building and its height. Fire compartments are achieved by means of: Fire doors, curtains, shutters Fireproof partitions Fireproof ceilings Fire-stop closures Consult our professionals Do not hesitate to contact us, we can draw up an estimate together to find the best solution for your security.

We offer fire- and smoke-rated doors of all types: metal and wood. According to ITM regulations: EI 2 30 s, EI2 60 s, EI2 90 s, EI1 30 s, EI1 60 s, EI1 90 s. Doors combining several criteria: acoustic, thermal, burglar-proof, armoured. Doors guaranteed for up to 10 years with an opening and closing cycle of up to 1,000,000 cycles. Fireproof sliding doors. Consult our professionals You can discuss with us and we can draw up an estimate together to find the best solution for your security.

The Fibreflam ISO6 curtain is a flexible partitioning curtain without irrigation. With a fire resistance degree of EI60, it also conforms to the DAS NF S61-937-1 and -4 standard. Thanks to its control panel and its motor operating in 400V, the closure of the curtain is obtained by gravity in case of fire alarm. Only its reopening is motorised. The standard dimensions of this fire curtain are up to 4.36 m wide and 4.21 m high. In spaces with strong architectural constraints, this curtain can easily be hidden behind cladding. We can help you with this project, so don't hesitate to submit your requirements via this contact form or by clicking on our website

Introduction: Eco-colorful metal exterior wall decoration, sound insulation/fire prevention/heat insulation, in line with 75% energy-saving standards, is widely used in tourist attractions, beaches,reservoirs, hillsides, agricultural ecological sharing farms, supporting intelligent systems. Core Technology: All-Aluminum Hidden Assembly Integrated Building, Multi-waterproof, thermal insulation, fire and moisture proof, smart home technical features:(1)The natural surface of exterior aluminium is antioxidant and corrosion resistant, and its life span is 50 years.(2) Fire protection performance: Class A fire protection; heat insulation, warm in winter and cool in summer(3) Earthquake resistance: 8 degree defense; Wind resistance: Typhoon of magnitude 12.(4) Sound insulation: in line with the sound insulation design of civil buildings, less than 40 decibels.(5)The interior adopt environmental protection new material - jute craft soft-fitting, sound insulation and heat insulation.

Product Name: copper tube Material: T2 TP2 TU2 Specification: 10-1000mm Grade: C12000 /C11000 Length: as required Cu (Min): 99.90% Alloy Or Not: Non-alloy Ultimate Strength Elongation (≥ %): 40(≥ MPa): 205 Wall Thickness: 0.2-60mm Outside Diameter: 11-800mm Place of Origin: China Package: standard export packing Shape: round Payment term:T/T,L/C etc. Application: 1 Air Conditioner and Refrigerator 2 Water tube service and distribution 3 Fire Protection, Solar, Fuel/Fuel Oil 4 Natural Gas, Liquefied Petroleum (LP)Gas 5 HVAC, Snow Melting, Drain, Waste, Vent Piping 6 Re-drawing usage 7 High conductivity use 8 Cable Lugs and Termainals 9 Electric Connectors 10 Lighting industry

Heat protection and fire protection for pipes and hoses. Also available as mats or rolls for surfaces

Intufit® strips prevent cold-hot smoke from spreading when they reach a specified temperature during the fire. As Intufit® strips expand 20 times larger than their initial shape during a fire, they provide fire retardant properties. As a result of the self-adhesive applied on steel fire-resistant doors.

Gomastit FireSeal MS 90 is an permanently elastic SMPbased joint sealant with a fire resistance of up to 120 minutes. Tested and classified for all joint orientations according to EN 13664. The paintcompatible and permanently elastic sealant with very low volume shrinkage meets the highest demands in the fire protection sector. The very low emissions allow safe application in interior areas.

Spoiler for the M5000 tram in Manchester, UK Bombardier designed the M5000 tram as a highfloor tram specially for use in Manchester. The spoiler consists of a solid stainless steel frame with a gluedon GRP profile. The profile was milled on modern CNC machines at TC, glued to the frame, primed and painted with a special 2KPUR metallic paint. It is manufactured in different lengths and designs. It has fire protection in accordance with BS 6853. For new projects, we meet fire protection requirements in accordance with EN 45545.

Roof panels for the Flexity tram in Palermo, Italy What looks like a threedimensional, singlecast component on the sides of trams from the Flexity range from Bombardier, consists of pultruded GRP elements with gluedon end caps, which have been milled, glued, primed and painted. Optionally, the 656 mm wide roof panel can also be manufactured with a gluedon bracket. It has fire protection in accordance with NF F 16101 and DIN 5510. For new projects, we also meet fire protection requirements in accordance with EN 45545.

Load capacity: 125 kN test load EN 124. Material: Frame and cover in 2 mm cold-formed precision steel profiles. Hot-dip galvanised. Fire protection panel on stainless steel Z-brackets, fire-resistant seal. Features: Accurately-manufactured smell proof access cover. Tapered design allows easy opening. Virtually invisible when installed. Robust steel mesh reinforcement. Fire test certificate: The Austrian test certificate issued by the Institute for Fire Protection Technology and Safety Research (IBS) confirms that HAGODECK Type BV-F90 steel resists a fire for 90 minutes and thus significantly contributes to safety in the event of a fire. In accordance with EN 13501-2, Type BV-F90 is classified in fire resistance class REI 90 (a ↔ b). The Lift-Off opening system: Every HAGODECK Type BV-F90 steel cover comes with a set of lifting keys and precise installation instructions. After lifting out the cover, the fire protection panel can be removed using its grab handle. The shaft is...

The door holding magnets are mainly used as holding devices on fire protection doors. They hold them in place when open. Controlled by a fire alarm or smoke protection control panel, they release the closures by interrupting the power supply in the event of a fire hazard. Product features: - Coil vacuum encapsulated (IP65) - VdS quality-controlled - Tested according to EN1155 & EN 14637 - Optimised design and quality - Accessories: Anchor plate

The door holding magnets are mainly used as holding devices on fire protection doors. They hold them in place when open. Controlled by a fire alarm or smoke protection control panel, they release the closures by interrupting the power supply in the event of a fire hazard. Product features: - Coil vacuum encapsulated (IP65) - VdS quality-controlled - Tested according to EN1155 & EN 14637 - Optimised design and quality - Accessories: Anchor plate

The door holding magnets are mainly used as holding devices on fire protection doors. They hold them in place when open. Controlled by a fire alarm or smoke protection control panel, they release the closures by interrupting the power supply in the event of a fire hazard. Product features: - Coil vacuum encapsulated (IP65) - VdS quality-controlled - Tested according to EN1155 & EN 14637 - Optimised design and quality - Accessories: Anchor plate

The door holding magnets are mainly used as holding devices on fire protection doors. They hold them in place when open. Controlled by a fire alarm or smoke protection control panel, they release the closures by interrupting the power supply in the event of a fire hazard. Product features: - Coil vacuum encapsulated (IP65) - VdS quality-controlled - Tested according to EN1155 & EN 14637 - Optimised design and quality - Accessories: Anchor plate