Industrial equipment - Import export

THE STABILIZER IMPULSE PSN380 will ensure the minimization of equipment failures, a high level of protection, a decrease in energy losses and a decrease in the downtime of critical consumers for a wide range of applications. IMPULSE PSN380 can be used not only on production lines, but also to protect equipment in cottages or offices.

Starch molding machine is designed for production of fruit-jelly (including jelly candy), liqueur, fondant sweets and Korovka sweets by starch molding. The machine consists of a movable belt, a molding mechanism and a depositor mechanism. The tray is filled with starch which serves as a forming material. The confectionery mass is fed from the hopper to the dosing unit which performs deposition of sweets/molding the marmalade into molds formed in the starch layer.

Cooling of confectionery and bakery products before packaging is one of the most long-run (up to 5 hours or more) processes in production. The conveyor belt with the length of more than 300 m is necessary to transport the products during this time. Сура СKБ spiral conveyor is the best option for a conveyor system for cooling products for a long time. Due to the spiral geometry of the belt arrangement in space, it is possible to provide a large length of the belt in a minimum volume that essentially saves production space. In addition, the product is transported on a spiral conveyor belt as softly as possible, without rolling from one lay to another like in multilayered systems.

VESTA spark arrestor quenches 100% of sparks, flames from chargrills, barbeques and ovens that work on open fire.

Thermal cooker is intended to make syrup, marmalade, marshmallows, and chocolate glaze. It is designed for the preparation and heating of various confectionery masses: - chocolate glaze; - syrups; - fillings, jams; - marshmallow, marmalade; - scalded dough; - soups, etc. We produce cookers with volume of up to 2000 liters. The frame mixer with scrapers, the DN40 drain valve, temperature sensors for product and heat transfer agent, and heat insulation of cooking container are installed in the factory state. DN60, DN80 or DN100 drain valves are installed according to the Customer's choice. The cookers are equipped with a mechanism of automatic or manual reverse intended to make viscous masses, for example, choux pastry. In this case, the mass is discharged through the neck of the cooker. The reversible and more powerful mixer drive (at least 0.55 kW) is equipped at the bottom. It is possible to install a variable frequency mixer drive for smooth speed change.

The СУРА-СП forming machine is designed for molding sugar cookies onto a belt with a further transportation to a wire-mesh plate of tunnel oven. The forming drum is one of the main units of the forming machine. It is a part of this machine and used for forming one type of cookies that have defined shape and pattern. At the request of the Customer, we can manufacture any number of drums with any pattern and shape of cookies. The patterns and shapes are chosen according to the catalogue.

It is designed for high-quality and uniform coating of various confectionery products with various types of glaze: chocolate fat sugar syrup, etc Due to the tank heating jacket and a mixing device, the glaze is heated to the operating temperature. The glaze is pumped into the glazing tank, and then the tank slide gates are opened and adjusted to obtain a straight, steady stream. The products to be glazed are placed on the feed conveyor and the conveyor is powered up. The products are transported on the large conveyor to the glazing area and then to the blowing area to remove excess glaze from the top. The bottom of the product is smoothed with the special rollers and then the products are transported to the cooling area. The glazing machine can be equipped with a decorator. Products can be glazed separately from the top, bottom or all sides. The machines for glazing with sugar syrup are manufactured considering some modifications necessary to operate the fast-hardening products.

Highly automated machines is designed for dosing of dough of various shapes and sizes without or with filling from different confectionery products on a baking pan by extrusion: -shortbread dough (hard or soft); -gingerbread dough; -dough for oatmeal cookies; -biscuit dough; -protein mass (souffle sweetmeat, pastille, marshmallow) The two-hopper mechanism of Сура СД and Сура СДУ depositors ensures the dosing of dough for double-color products or single-color filled products. All Сура С, Сура СД, Сура СДУ machines in standard version are equipped with mechanisms for rotation of draw plates and movement of the conveyor in the vertical plane. Сура СДУ universal depositor can be equipped with a diaphragm cutting unit where the diaphragms can be arranged both in single row and in staggered rows. Possibility to equip any Сура С, Сура СД, Сура СДУ machines additionally with a string cutting unit given that the frame of all machine s are equipped with the connection elements.

TEPLOPANEL climatic cassette-type panels operate on principle of thermal infrared radiation. Infrared waves, without air heating, turn into heat while contacting with the surface of objects and people. Thus, the heated objects emit heat secondary and give it to the air by means of convection. Functionally it is a low-temperature energy saving infrared emitter. The heat carrier is water preheated by any hot water boiler, central heat supply or alternative source (for example, heat pump). Thus, the water radiant panel is the best and the most effective energy saving infrared appliance, as it operates with water of up to 95°С. Water heating source operates on any type of fuel: gas, electricity, wood, pellets, waste oil, central heat supply. TEPLOPANEL system provides fast room heating, has low lag effect in comparison with any convective systems. Low temperature of heat distribution creates uniform temperature in the room and allows to use infrared heaters in fire-hazardous objects.

TEPLOPANEL climatic cassette-type panels operate on principle of thermal infrared radiation. Infrared waves, without air heating, turn into heat while contacting with the surface of objects and people. Thus, the heated objects emit heat secondary and give it to the air by means of convection. Functionally it is a low-temperature energy saving infrared emitter. The heat carrier is water preheated by any hot water boiler, central heat supply or alternative source (for example, heat pump). Thus, the water radiant panel is the best and the most effective energy saving infrared appliance, as it operates with water of up to 95°С. Water heating source operates on any type of fuel: gas, electricity, wood, pellets, waste oil, central heat supply. TEPLOPANEL system provides fast room heating, has low lag effect in comparison with any convective systems. Low temperature of heat distribution creates uniform temperature in the room and allows to use infrared heaters in fire-hazardous objects.

TEPLOPANEL climatic cassette-type panels operate on principle of thermal infrared radiation. Infrared waves, without air heating, turn into heat while contacting with the surface of objects and people. Thus, the heated objects emit heat secondary and give it to the air by means of convection. Functionally it is a low-temperature energy saving infrared emitter. The heat carrier is water preheated by any hot water boiler, central heat supply or alternative source (for example, heat pump). Thus, the water radiant panel is the best and the most effective energy saving infrared appliance, as it operates with water of up to 95°С. Water heating source operates on any type of fuel: gas, electricity, wood, pellets, waste oil, central heat supply. TEPLOPANEL system provides fast room heating, has low lag effect in comparison with any convective systems. Low temperature of heat distribution creates uniform temperature in the room and allows to use infrared heaters in fire-hazardous objects.

TEPLOPANEL climatic cassette-type panels operate on principle of thermal infrared radiation. Infrared waves, without air heating, turn into heat while contacting with the surface of objects and people. Thus, the heated objects emit heat secondary and give it to the air by means of convection. Functionally it is a low-temperature energy saving infrared emitter. The heat carrier is water preheated by any hot water boiler, central heat supply or alternative source (for example, heat pump). Thus, the water radiant panel is the best and the most effective energy saving infrared appliance, as it operates with water of up to 95°С. Water heating source operates on any type of fuel: gas, electricity, wood, pellets, waste oil, central heat supply. TEPLOPANEL system provides fast room heating, has low lag effect in comparison with any convective systems. Low temperature of heat distribution creates uniform temperature in the room and allows to use infrared heaters in fire-hazardous objects.

TEPLOPANEL climate system is based on principle of thermal infrared radiation. Infrared waves, without air heating, turn into heat while contacting with the surface of objects and people. Thus, the heated objects emit heat secondary and give it to the air by means of convection. The heat carrier in the radiant panels is classical preheated water. Thus, the water radiant panel is the best and the most effective energy saving infrared appliance, as it operates with water of up to 95°С. Water heating source operates on any type of fuel: gas, electricity, wood, pellets, waste oil, central heat supply. TEPLOPANEL system provides fast room heating, has low lag effect in comparison with any convective systems. Low temperature of heat distribution creates uniform temperature in the room and allows to use infrared heaters in fire-hazardous objects. It enables to save up to 52% expenses of the energy carrier compared to air heating appliances. The higher the room the more savings you achieve.

TEPLOPANEL climate system is based on principle of thermal infrared radiation. Infrared waves, without air heating, turn into heat while contacting with the surface of objects and people. Thus, the heated objects emit heat secondary and give it to the air by means of convection. The heat carrier in the radiant panels is classical preheated water. Thus, the water radiant panel is the best and the most effective energy saving infrared appliance, as it operates with water of up to 95°С. Water heating source operates on any type of fuel: gas, electricity, wood, pellets, waste oil, central heat supply. TEPLOPANEL system provides fast room heating, has low lag effect in comparison with any convective systems. Low temperature of heat distribution creates uniform temperature in the room and allows to use infrared heaters in fire-hazardous objects. It enables to save up to 52% expenses of the energy carrier compared to air heating appliances. The higher the room the more savings you achieve.

TEPLOPANEL climate system is based on principle of thermal infrared radiation. Infrared waves, without air heating, turn into heat while contacting with the surface of objects and people. Thus, the heated objects emit heat secondary and give it to the air by means of convection. The heat carrier in the radiant panels is classical preheated water. Thus, the water radiant panel is the best and the most effective energy saving infrared appliance, as it operates with water of up to 95°С. Water heating source operates on any type of fuel: gas, electricity, wood, pellets, waste oil, central heat supply. TEPLOPANEL system provides fast room heating, has low lag effect in comparison with any convective systems. Low temperature of heat distribution creates uniform temperature in the room and allows to use infrared heaters in fire-hazardous objects. It enables to save up to 52% expenses of the energy carrier compared to air heating appliances. The higher the room the more savings you achieve.

TEPLOPANEL climate system is based on principle of thermal infrared radiation. Infrared waves, without air heating, turn into heat while contacting with the surface of objects and people. Thus, the heated objects emit heat secondary and give it to the air by means of convection. The heat carrier in the radiant panels is classical preheated water. Thus, the water radiant panel is the best and the most effective energy saving infrared appliance, as it operates with water of up to 95°С. Water heating source operates on any type of fuel: gas, electricity, wood, pellets, waste oil, central heat supply. TEPLOPANEL system provides fast room heating, has low lag effect in comparison with any convective systems. Low temperature of heat distribution creates uniform temperature in the room and allows to use infrared heaters in fire-hazardous objects. It enables to save up to 52% expenses of the energy carrier compared to air heating appliances. The higher the room the more savings you achieve.

Electric infrared ceiling panels TEPLIY KVADRAT are low-temperature radiants for efficient heating of residential & office premises up to 4 m high. The system is based on principle of thermal infrared radiation. The advantage of transferring heat by radiation is the immediate effect of heating surfaces of objects that absorb heat from the panels, without preheating the air around them. Thus, all objects in the premises are heated, including floor, walls, furniture, equipment, etc. The heated objects emit heat secondary and give it to the air by means of convection. So, the system provides fast room heating, has low lag effect in comparison with any convective systems. Low temperature of heat distribution creates uniform temperature in the room. TEPLIY KVADRAT panels are designed for comfortable and energy-efficient heating of any kinds of rooms, except rooms with high humidity. The panels can operate directly from the socket or standard thermostat-controller.

Hydraulic oil HLP 32/46/68 hydraulic oils with a high level of performance. They are manufactured on the basis of highly refined petroleum base oils with a multifunctional additive package that improves filterability, antioxidant, anticorrosive, antiwear, demulsifying and antifoam properties. Designed for use in hydraulic systems of industrial equipment operating under high mechanical and thermal loads, equipped with servo-hydraulic units, proportional control systems and filter elements with a filtration rating of 3-5 microns.

Industrial oil I-12 / I-20 / I-40A / I-50 is intended for use in various types of low and medium loaded industrial equipment, the operating conditions of which do not impose special requirements on the antioxidant and anticorrosive properties of the oil. The oils are produced on the basis of high quality mineral base components of the distillate type. The quality corresponds to All Union State standard – GOST 20799-88.

Base oil SN-150 is a petroleum distillation product, a base component of commercial lubricating oil. In general, base oils are produced in series with different viscosity, but with the same other characteristics. Application area Base oil SN-150 is intended for use in machines and mechanisms of industrial equipment, the operating conditions of which do not impose special requirements on the antioxidant and anticorrosive properties of oils. It is also used as a basis for the production of lubricants, mainly for motor oils production. Benefits of Base Oil SN-150 Can be used as base components in the manufacture of lubricating oils. It is possible to manufacture oils of intermediate viscosity classes (for example, I-30A) by mixing more viscous oils with less viscous oils in an appropriate proportion. In almost all cases, this oil can be replaced with doped oils of the IGP series of appropriate viscosity.

Base oil SN-80 is a petroleum distillation product, a base component of commercial lubricating oil. In general, base oils are produced in series with different viscosity, but with the same other characteristics. Application area Base oil SN-80 is intended for use in machines and mechanisms of industrial equipment, the operating conditions of which do not impose special requirements on the antioxidant and anticorrosive properties of oils. It is also used as a basis for the production of lubricants, mainly for motor oils production. Benefits of Base Oil SN-80 Can be used as base components in the manufacture of lubricating oils. It is possible to manufacture oils of intermediate viscosity classes (for example, I-30A) by mixing more viscous oils with less viscous oils in an appropriate proportion. In almost all cases, this oil can be replaced with doped oils of the IGP series of appropriate viscosity.

During the construction of an industrial facility, much attention is paid to the strength of the service pipelines fasteners. It is also necessary to provide reliable connection of all units of industrial equipment with the pipelines. In this case, it is not always possible The use of a permanent welded joint is not always possible, therefore, there are various types of weld-free tight joints. FLANGE JOINT COMPONENTS At present, one of the most effective connections used in industrial facilities is a flange joint. This is an airtight connection that provides high structural integrity, consists of two flanges, fasteners (studs or bolts, washers, nuts) and gaskets. An important matter in choosing a set of flanges is tightness. The gasket material must have good elasticity, strength, resistance to the operating temperature conditions and to the media with which direct contact is expected. For flange joints, Villina company uses the following types

Base oil SN-400 is a petroleum distillation product, a base component of commercial lubricating oil. In general, base oils are produced in series with different viscosity, but with the same other characteristics. Application area Base oil SN-400 is intended for use in machines and mechanisms of industrial equipment, the operating conditions of which do not impose special requirements on the antioxidant and anticorrosive properties of oils. It is also used as a basis for the production of lubricants, mainly for motor oils production. Benefits of Base Oil SN-400 Can be used as base components in the manufacture of lubricating oils It is possible to manufacture oils of intermediate viscosity classes (for example, I-30A) by mixing more viscous oils with less viscous oils in an appropriate proportion In almost all cases, this oil can be replaced with doped oils of the IGP series of appropriate viscosity.

Melanger Allure FM1 is a real home cook’s assistant! It is a cute and very easy-to-use device that will easily fit even in a small kitchen.

Allure CD3-2020 perfectly splits up both fried and crude cocoa beans making crushed cocoa and releases them from a peel — wella.

For elimination of air bubbles from chocolate paste. 100%-taste of natural craft chocolate – just as you wish! The Allure VD Vibro-table is intended for the elimination of air bubbles from the chocolate paste. 100% – taste of a natural craft chocolate. Exactly the chocolate you have wanted.

IntelleWaferBall is a wafer balls production line. You can also add variety by changing shapes and sizes (animal figures, filling with boiled condensed milk, creams, etc.). It allows producing products with curd, cheese, salad and pate fillings (salty line).

IntelleStamp is a modern molding and extruding two-component auger-type complex for molding products from dense masses (toffee, nougat, hematogen, choux pastry for pryaniks, soft nut brittle, chilled dense curd mass) with liquid fillings. It allows you to extrude masses with the addition of particles of 3-5 mm (nuts, raisins, candied fruits, etc.).

When importing products into Russia, you need to comply with a wide range of complex certification systems and national standards. Depending on the nature of the goods you are planning to ship to Russia or to another Commonwealth of Independent States (CIS) country, you may need to gain one or more approvals. We also help exporters and importers of equipment and consumer goods to enter the Russian and European markets through certification against national and international standards. We arrange EAC certificate which is a document attesting that your products conform to the regulations of the Member States of the Eurasian Customs Union and is obligatory for most imported goods, especially cosmetics, foodstuffs, toys, textiles, electrical and industrial equipment. We test, inspect, certify and advise! Certification, EAC certificate, Declarations, EAC certificate, TR CU certificate, Quality Certificate, Certificate of Conformity, Safety Certificate, Customs Certificate, EAC marking,