Shock absorbers- hydraulic - Import export

The hydraulic industrial shock absorber of the C-series (COMPENSER®) is the ideal hydraulic buffer for storage and retrieval machines or smaller conveyor systems, crane systems, test stands etc. in light to medium mechanical engineering. Due to its short design, this hydraulic buffer (COMPENSER®) can be used in a spacesaving manner as limitation of the end position (as emergency end stop) in industrial applications. In addition, the low reset force allow operational pushin cycles at creep speed. Design & Function: The piston rod 2 enters the metering tube 3. The damping medium flows from the pressure chamber 6 through the throttle orifices 4 of the metering tube 3 into the volume balance chamber 5. The nitrogen gas between the outer tube 7 and the metering tube 3 is compressed and stores the energy required for the reset of the piston rod. When the piston rod 2 returns to the initial position, the damping medium flows back into the pressure chamber 6.

The COMPENSER® of the DC-series is an ideal hydraulic shock reducing element especially for the application field of storage technology (storage and retrieval machines). As a doubleacting buffer, this industrial shock absorber can be used in a spacesaving manner due to its design and can be actuated alternately from both sides. The constructive design and function corresponds to the C-Type. Furthermore, due to its low reset force, it can easily be pressed in at creep speed during operation. As optional equipment PU caps as inserts for the impact cap for the reduction of impact noise and a monitoring of the piston rod‘s position (by either magnetic or inductive sensors) are available. If only a slight increase of reset force of the piston rod over the entire stroke is desired, an additional external accumulator can be fitted to the cylinder to increase the gas volume of the gas spring. Hence the reset force decreases in retracted state.

The COMPENSER® of the KL-series is an industrial shock absorber for light mechanical engineering, e.g. handling equipment, small storage and retrieval machines and small crane systems. Due to the low reset force of the compression spring, this buffer of the KL-series is well suited for operational push-in cycles at creep speed. Design & Function: The piston rod 2 pushes the piston 6 into the pressure chamber 7. At the same time, the damping medium flows through the metering grooves placed in the outer tube 8, via the piston 6 and into the volume balance chamber 5. The return spring 3 is tensioned and, after the impact has occurred, pushes the piston rod 2 back to the initial position. By this the damping medium flows back into the pressure chamber 7.

The preferred field of application for the (gas) hydraulic industrial buffer (COMPENSER®) of the S-series is in the medium to heavy engineering industry sector. As a heavy duty shock absorber it is used in large crane systems (e.g. harbour crane, shipyard crane or container crane), metallurgical plants, rolling mills, loading systems or as end stop integrated in a rail buffer stop. Design & Function: The gas-filled inner tube 2 enters the outer tube 9. The damping medium flows from the pressure chamber 6 through the throttle orifices 8 of the metering tube 7 into the volume balance chamber 5. The separating piston 4 simultaneously moves in the direction of the impact cap 1 and compresses the nitrogen gas filling. In the gas space 3, the energy is stored which is required for the reset of the inner tube. When the inner tube 2 returns to the initial position, the separating piston 4 moves in the opposite direction and presses the damping medium back into the pressure chamber 6.

Hydraulic DampersHydraulic damper Hydraulic Damper is widely using in the automotive,fitness equipment and medical equipment, which is characterized by resistance to change with the speed of operation. it's has visible buffering function to the connected systems. Dampers are mainly used as a buffer role, it's biggest feature is the force of gas spring changed by travel speed change. when the action point which guided by outside force to the gas spring with a fast movement,the gas spring's resistance will increase. and when the point of movement is very slow, virtually almost no resistance. ndustrial Applications: Hydraulic Dampers are used in washing machines, refrigerators,fitness & medical facilities and other industries for bear the responsibility of shock absorption or damping. sales@gasspringscn.com

Our product properties and advantages are listed below: - All our products are manufactured with high quality & meticulously selected mostly Turkish raw materials - Premium quality shock absorber oils such as; Fuchs and Texoil are used in production - Products’ tube and sheet thickness directly match OEM standards (25% thicker than Chinese competitors products) - Manufactured with Cataphoresis Coating and Robotic Welding which Secures utmost endurance and long service life (our entire product range come with a 1 year Guarantee period)

Suspension strut (gas hydraulic shock absorber) by LEBENDahmenstechnik GmbH Advantage Use in pulling and pushing direction Small design Variable preload force of the damper Used as a buffer in Amphibious vehicle Underground shuttle … Illustrated suspension strut Damping of the independent suspension of an amphibious vehicle Special feature Nitrogen gas spring as triple membrane accumulator Regulation of the spring stiffness while driving

This design by LEBENDämpfungstechnik GmbH acts as a hydraulic shock absorber in both, pulling and pushing direction. The energy dissipation of this kind of industrial shock absorber is performed in two ways Working principle As a purely hydraulic variant (TwinStroke®) – in push (compression) direction hydraulically reversible by means of damping medium – in pull (tension) direction hydraulically reversible by means of damping medium The TwinStroke® dampens push and pull forces without an additional functional element. A piston system transmits the push and pull forces gashydraulically to different gas and oil chambers. In this way, any load can be absorbed immediately without idle stroke, socalled “slack”, and with minimal wear. The TwinStroke® can absorb changing loads very well. The smaller size and lower weight is advantageous, as only one element is needed to absorb compression and tension forces.

Table for manual using or outside motorization Guided on ball bushings Guide tables without transmission These tables are used for manual movement or for external drives. The end plates are tapped in the center to optionally receive a hydraulic shock absorber or stroke adjustment. On request, a position clamping is available (option /BP0* on leadscrew tables). Range of linear tables with cylinder or screw transmission These tables exist, in the same dimensions, in different versions – suitable for pneumatic cylinder Type 307 – with trapezoidal screw for electric drive Type 308 – with ball screw for electric drive Type 308 – with trapezoidal screw for manual drive Type 309

Fixing by its sturdy end plate Drived by ISO pneumatic cylinder Guided by 2 rods on ball bushings Adjustable mechanical stops Hydraulic shock absorbers Inductive sensors Flow limitation Easier implementation Attached to the frame by its end thanks to a sturdy flange, they serve as a lifting module for assembly, loading and conditioning machines. By combining them with Type 37 linear manipulators, you can create 2axis ZX. Equipped with hydraulic shock absorbers, inductive sensors and flow limiters, these manipulators are ready to be installed and wired. Optimized end of stroke adjustments The fine adjustment of the stroke is done by mechanical stops without any intervention on the hydraulic shock absorbers and the inductive sensors this saves time, guarantees the reliability of the adjustment and ensures an optimal lifetime of these components. All these components are very common on the market and are very accessible, thus facilitating the maintenance

Drived by pneumatic cylinder (ISO or rodless) Guided by rolling guides Adjustable mechanical stops Hydraulic shock absorbers Inductive sensors Flow limitation More than a rodless guided cylinder With their selfsupporting aluminum beam and being equipped with mechanical endofstroke stops, hydraulic shock absorbers, inductive sensors and flow limiters, these gantries are more than a cylinder without guided rod, they are real handling axes ready to install and wired. They are intended for the transfer of loads from 3 to 50 kg over strokes up to 1500 mm. Pneumatic Cartesian manipulators The mobile carriage, drived by a rodless cylinder (or a rod cylinder in short stroke to be more economical) allows to carry a perpendicular axis to create cartesian manipulators with 2 or 3 axes, with manipulators Type 37. Optimized end of stroke adjustments Pneumatic gantry with intermediate positions with through-travel

Table for pneumatic cylinders ISO Ø16 to Ø40 Guided on ball bushings Protected by wipers seals More rigid than a H guide unit These tables maintaining the same quality of guidance and rigidity throughout the stroke. For a offcentered payload in vertical, these tables allow to be more rigid than a guide unit in H. Hydraulic shock absorber on this table A hydraulic shock absorber may be placed in opposition to the pneumatic cylinder to dampen, for example, the descent and/or limit the stroke at the output of the cylinder rod. The retracting stroke can be adjusted by the floating rod coupling. Use in harsh environment For dusty environments, additional nitrile or polyurethane scrapers can be added in front of the ball bushings. An anticorrosion version can be proposed with the rods, the coupling and the screws in stainless steel (the carriage and the plates remain in anodized aluminum). It’s possible to make these tables with plain bearings (bronze or polymer) on request.

For pneumatic cylinders ISO Ø16 and Ø25 Guided on ball bushings Adjustable mechanical stops Manipulator made with your components = competitiveness These linear units make it possible to carry out any translation requiring precision and rigidity, to move up to 15 kg on 1, 2 or 3 axes (handling, assembly, loading, transfer, packaging …). By adding a cylinder with sensors and flow limiters as well as hydraulic shock absorbers from the supplier of your choice, you get a complete module that generally meets the requirements of the panels of suppliers, at a very competitive price.

U guide unit for pneumatic cylinders ISO Ø32 to Ø80 Short guide on bronze bearings Protected by wipers seals Short guide for ISO15552 pneumatic cylinder This Classic Series provides antirotation of the cylinder rod. The guide is shorter than the H Classic series and is only available in plain bearings, so this series is recommended for low strokes and moderate loads. Anticorroding Uguide For environments requiring an anticorrosion version, the steel parts can be supplied in stainless steel (rods, coupling, screws), the body and the front plate are remaining in anodized aluminum (suffix /AC after the reference). For all stainless steel guides, refer to the 34*X series. Protection kit and back stop kit on Uguide The protection kit (tube wrapping the rods at the rear of the guide), for example allows to avoid a guarding housing on a semiautomatic machine (label maker …). The back stop kit, with hydraulic shock absorber, allows

Motorization by integrated pneumatic cylinder Driving by rack and pinion system Adjustable mechanical stops Hydraulic shock absorbers Inductive sensors The wrist of a manipulator arm These rotary modules are, for example, the wrist of a manipulator arm, the turner of parts on a conveyor or the axis of rotation of an oscillating manipulator. In general, they rotate the gripper that grips the part. These modules are equipped with hydraulic dampers and inductive sensors, the rotation guidance is ensured by 2 ball bearings that allow this module to be used in all directions, even with offcentered payload. Rotary cylinder without angular play at end of stroke The end stops located under the plate allow there to be no shock in the rack and pinion transmission and no angular play at the end of the stroke. The absence of angular play allows use in assembly or precise positioning applications with 2 positions and the absence of impact in rack

Drived by integrated pneumatic cylinder Guided by 2 rods on ball bushings Adjustable mechanical stops Hydraulic shock absorbers Inductive sensors Flow limitation Compact and robust manipulator With a compact and very robust design, they are suitable for shortstroke movement where rigidity is necessary. They are often used in vertical or lifting modules in the design of pneumatic handling assemblies. For longer strokes, use the Type 37 manipulators. Several mounting directions possible Equipped with the same end plates and without exceeding of the cylinder at the end of the stroke, these compact manipulators can be fixed by the 2 end plates to have the movable central body, but they can also be fixed by the body, the rod cylinder can then be oriented up or down. Optimized end of stroke adjustments The fine adjustment of the stroke is done by mechanical stops without any intervention on the hydraulic dampers and the inductive detectors this saves time

Pneumatic manipulator for handling drived by ISO pneumatic cylinder. Guided by 2 rods on ball bushings and end stroke adjustable by mechanical stops. Hydraulic shock absorbers, inductive sensors and flow limitation are supplied. Pneumatic pick and place and 3 axes handling systems The combination of 2 pneumatic manipulators makes it possible to create pick & place (XZ manipulators) for assembly, loading, packaging machines … By combining them with gantries it’s possible to realize 3axis cartesian pneumatic manipulators. Equipped with hydraulic dampers, inductive sensors and flow limiters, these manipulators are ready to be installed and wired. Optimized end of stroke adjustments The fine adjustment of the stroke is done by mechanical stops without any intervention on the hydraulic dampers and the inductive detectors this saves time, guarantees the reliability of the adjustment and ensures an optimal lifetime of these components.

Winson Pneumatic & Hydraulic Struts Custom Hydraulic Shock Dampers Hydraulic Damper is widely using in the automotive,fintness equipment and medical equipment, which is characterized by resistance to change with the speed of operation. it's has visible buffering function to the connected systems. Dampers are mainly used as a buffer role, it's biggest feature is the force of gas spring changed by travel speed change. when the action point which guided by outside force to the gas spring with a fast movement,the gas spring's resistance will increase. and when the point of movement is very slow, virtually almost no resistance. We custom OEM hydraulic dampers according to customer's drawings or samples. sales@gasspringscn.com WhatsApp +86 13780014913

Ming Xiao Manufacturing Co., Ltd appoint Ningbo Cospl Pneumatic & Hydraulic Components Co.,Ltd produce our Gas Springs products, Cospl is a professional industrial gas springs manufacturer & supplier from China. we are specialize in manufacturing various of nitrogen filled gas spring or call it gas struts,hydraulic Dampers, Shock Absorbers. Our main products include: Compression Gas Springs/ Gas Struts/ Gas lift springs/Lift supports, Locking Gas Springs,Traction gas spring/ Tension gas springs / draught gas spring, Hydraulic Dampers, Adjustable shock absorbers, etc. These gas springs & dampers can be widely applied in the fields such as aviation, automobiles, motorcycles trunk, machinery, medical exam & treatment table, fitness equipments ,furniture, doors, cabinets, etc. Gas springs are widely used in the automotive, aerospace, medical equipment, fitness equipment, furniture, machinery and other areas. for examples: door, cabinet, window, treatment table, exam bed, trunk lid...

Ming Xiao Manufacturing Co., Ltd custom produce high quality lockable gas springs struts for world customers. we are specialize in manufacturing various of nitrogen filled gas spring or call it gas struts,hydraulic Dampers, Shock Absorbers. Our main products include: Compression Gas Springs/ Gas Struts/ Gas lift springs/Lift supports, Locking Gas Springs,Traction gas spring/ Tension gas springs / draught gas spring, Hydraulic Dampers, Adjustable shock absorbers, etc. These gas springs & dampers can be widely applied in the fields such as aviation, automobiles, motorcycles trunk, machinery, medical exam & treatment table, fitness equipments ,furniture, doors, cabinets, etc. Gas springs are widely used in the automotive, aerospace, medical equipment, fitness equipment, furniture, machinery and other areas. for examples: door, cabinet, window, treatment table, exam bed, trunk lid...

Ming Xiao Manufacturing Co., Ltd specialize in custom manufacturing various of nitrogen filled gas spring or call it gas struts,hydraulic Dampers, Shock Absorbers. Our main products include: Compression Gas Springs/ Gas Struts/ Gas lift springs/Lift supports, Locking Gas Springs,Traction gas spring/ Tension gas springs / draught gas spring, Hydraulic Dampers, Adjustable shock absorbers, etc. These gas springs & dampers can be widely applied in the fields such as aviation, automobiles, motorcycles trunk, machinery, medical exam & treatment table, fitness equipments ,furniture, doors, cabinets, etc. Gas springs are widely used in the automotive, aerospace, medical equipment, fitness equipment, furniture, machinery and other areas. for examples: door, cabinet, window, treatment table, exam bed, trunk lid...

Ming Xiao Manufacturing Co., Ltd appoint Ningbo Cospl Pneumatic & Hydraulic Components Co.,Ltd produce our Gas Springs products, Cospl is a professional industrial gas springs manufacturer & supplier from China. we are specialize in manufacturing various of nitrogen filled gas spring or call it gas struts,hydraulic Dampers, Shock Absorbers. Our main products include: Compression Gas Springs/ Gas Struts/ Gas lift springs/Lift supports, Locking Gas Springs,Traction gas spring/ Tension gas springs / draught gas spring, Hydraulic Dampers, Adjustable shock absorbers, etc. These gas springs & dampers can be widely applied in the fields such as aviation, automobiles, motorcycles trunk, machinery, medical exam & treatment table, fitness equipments ,furniture, doors, cabinets, etc. Gas springs are widely used in the automotive, aerospace, medical equipment, fitness equipment, furniture, machinery and other areas. for examples: door, cabinet, window, treatment table, exam bed, trunk lid...

Ming Xiao Manufacturing Co., Ltd appoint Ningbo Cospl Pneumatic & Hydraulic Components Co.,Ltd produce our Gas Springs products, Cospl is a professional industrial gas springs manufacturer & supplier from China. we are specialize in manufacturing various of nitrogen filled gas spring or call it gas struts,hydraulic Dampers, Shock Absorbers. Our main products include: Compression Gas Springs/ Gas Struts/ Gas lift springs/Lift supports, Locking Gas Springs,Traction gas spring/ Tension gas springs / draught gas spring, Hydraulic Dampers, Adjustable shock absorbers, etc. These gas springs & dampers can be widely applied in the fields such as aviation, automobiles, motorcycles trunk, machinery, medical exam & treatment table, fitness equipments ,furniture, doors, cabinets, etc. Gas springs are widely used in the automotive, aerospace, medical equipment, fitness equipment, furniture, machinery and other areas. for examples: door, cabinet, window, treatment table, exam bed, trunk lid...

Ming Xiao Manufacturing Co., Ltd appoint Ningbo Cospl Pneumatic & Hydraulic Components Co.,Ltd produce our Gas Springs products, Cospl is a professional industrial gas springs manufacturer & supplier from China. we are specialize in manufacturing various of nitrogen filled gas spring or call it gas struts,hydraulic Dampers, Shock Absorbers. Our main products include: Compression Gas Springs/ Gas Struts/ Gas lift springs/Lift supports, Locking Gas Springs,Traction gas spring/ Tension gas springs / draught gas spring, Hydraulic Dampers, Adjustable shock absorbers, etc. These gas springs & dampers can be widely applied in the fields such as aviation, automobiles, motorcycles trunk, machinery, medical exam & treatment table, fitness equipments ,furniture, doors, cabinets, etc. Gas springs are widely used in the automotive, aerospace, medical equipment, fitness equipment, furniture, machinery and other areas. for examples: door, cabinet, window, treatment table, exam bed, trunk lid...

Stainless steel gas springs are mainly used in places that are more prone to corrosion and rust than conventional environments, such as bathrooms and medical laboratories. We are specialize in manufacturing various of nitrogen filled gas spring or call it gas struts,hydraulic Dampers, Shock Absorbers. Our main products include: Compression Gas Springs/ Gas Struts/ Gas lift springs/Lift supports, Locking Gas Springs,Traction gas spring/ Tension gas springs / draught gas spring, Hydraulic Dampers, Adjustable shock absorbers, etc. These gas springs & dampers can be widely applied in the fields such as aviation, automobiles, motorcycles trunk, machinery, medical exam & treatment table, fitness equipments ,furniture, doors, cabinets, etc. Gas springs are widely used in the automotive, aerospace, medical equipment, fitness equipment, furniture, machinery and other areas. for examples: door, cabinet, window, treatment table, exam bed, trunk lid...

Winson Pneumatic & Hydraulic Struts is a machinery products solution company specialize in developing & manufacturing various of nitrogen filled gas springs or call it gas struts,hydraulic dampers, shock absorbers. Our main products include: Compression Gas Springs/ Gas Struts/ Gas lift springs/Lift supports, Locking Gas Springs,Traction gas spring/ Tension gas springs / draught gas spring, Hydraulic Dampers, Adjustable shock absorbers, etc. These gas springs & dampers can be widely applied in the fields such as aviation, automobiles (bus,car,truck,trailer), motorcycles trunk, machinery, medical exam & treatment table,chair,bed, fitness equipments ,furniture, doors, cabinets, etc. We only produce reliable quality and affordable products, customer satisfaction is our consistent pursuit!

When the gas spring loses pressure because of leakage, there is no support force, which can play a role of safety support. With condom jacketed self-locking gas spring Scope of application : industrial, Marine,Vehicle, bed, etc Winson Pneumatic & Hydraulic Struts is a machinery products solution company specialize in developing & manufacturing various of nitrogen filled gas springs or call it gas struts,hydraulic dampers, shock absorbers. Our main products include: Compression Gas Springs/ Gas Struts/ Gas lift springs/Lift supports, Locking Gas Springs,Traction gas spring/ Tension gas springs / draught gas spring, Hydraulic Dampers, Adjustable shock absorbers, etc. These gas springs & dampers can be widely applied in the fields such as aviation, automobiles (bus,car,truck,trailer), motorcycles trunk, machinery, medical exam & treatment table,chair,bed, fitness equipments ,furniture, doors, cabinets, etc.

Winson Pneumatic & Hydraulic Struts is a machinery products solution company specialize in developing & manufacturing various of nitrogen filled gas springs or call it gas struts,hydraulic dampers, shock absorbers. Our main products include: Compression Gas Springs/ Gas Struts/ Gas lift springs/Lift supports, Locking Gas Springs,Traction gas spring/ Tension gas springs / draught gas spring, Hydraulic Dampers, Adjustable shock absorbers, etc. These gas springs & dampers can be widely applied in the fields such as aviation, automobiles (bus,car,truck,trailer), motorcycles trunk, machinery, medical exam & treatment table,chair,bed, fitness equipments ,furniture, doors, cabinets, etc. We only produce reliable quality and affordable pneumatuc & hydraulic struts, customer satisfaction is our consistent pursuit!

The TR 491 tripod turnstiles efficiently guide high-volume throughput. With the possibility of indoor or outdoor installation, the turnstiles are equipped with an anti-panic system that makes the horizontal arm blocking the passage drop in the case of an emergency evacuation or power cut. Main Benefits : Bi-directional turnstile made especially for quick access control in areas with high traffic but limited space An anti-panic system moves the arm from the horizontal to vertical position, thereby completely freeing the lane in the case of an emergency evacuation Non-removable stainless steel arms to prevent vandalism Durable, corrosion-resistant, heavy-duty mechanism for extended service life Easy Installation Front and rear sections specially designed to integrate the selected access control system Many configurations covering all possible pedestrian access control scenarios Ergonomics & User Protection Adjustable-pressure hydraulic shock absorbers for silent, smooth rotation.