Add my company Get multiple quotes Log in
  • europages
  • >
  • COMPANIES - SUPPLIERS - SERVICE PROVIDERS
  • >
  • calibration laboratories

Results for

Calibration laboratories - Germany

Germany
17 Companies 25 Products

  1. EP EHRLER PRÜFTECHNIK ENGINEERING GMBH

    Germany

  2. HÖNTZSCH GMBH

    Germany

    Verified by europages badge

    Flow measurement technology has been the core of our business since our company was founded in 1966. From 1976 onwards, Höntzsch has worked to develop, manufacture and distribute innovative and groundbreaking products in the flow measurement sector, and has been part of the DMT GmbH & Co. KG group in Essen as of 2012. Höntzsch also offers solutions for special areas of application such as explosive zones in accordance with ATEX, for gases with operating temperatures up to 550 °C, for measurements under regulatory control in accordance with the "TA Luft" air pollution control regulation and sections 13 and 17 of the "BImSchV" (the German Federal Imission Protection Ordinance), for high flow speeds of up to 200 m/s or for flows with changing directions of flow. Our DAkkS-accredited calibration laboratory completes our range. Air flow meters, calibration service for electrical measuring and testing equipment, development of flow meters, intrinsically safe sensors for explosion protection areas, compressed air measurement, intrinsically safe equipment for explosion protection areas and compressed air flow meters

    Website Open In New icon

  3. TEMPERATURMESSTECHNIK GERABERG GMBH

    Germany

    Verified by europages badge

    Since its foundation in 1990, tmg has established itself on the German and international market as a specialist in electrical temperature measurement technology. The family business is now run by the second generation of the same family. The product range offers intelligent and reliable solutions for almost all industrial sectors. To this day, the core business consists both in producing a wide variety of standard thermometers with an extensive array of design variants and in developing and producing customer-specific and industry-oriented sensor designs. The continuous production capacity expansion and the technological equipment extension enables the continuous new and further development of products. Quality control checks, calibrations and metrological tests are carried out during production in the company's internal calibration laboratory with DKD and DAkkS accreditation.

    Website Open In New icon

  4. MELUTEC METROLOGY GMBH

    Germany

    Verified by europages badge

    Our calibration laboratory is accredited according to DIN EN ISO/IEC 17025 by DAkkS (Deutschen Akkreditierungsstelle GmbH [German Accreditation Body]) for measuring the parameters of length, torque, temperature, relative humidity and scales under register number D-K-15048-01-00. As an accredited DAkkS calibration laboratory, we comply with the requirements of all national and international standards. We don't just want to satisfy our customers; we want to inspire them. Since the company was founded in 1991, we have expanded to offer a variety of services and are currently continuously developing in this sector. We have extensive experience in calibration technology. Customers in Germany and around the world benefit from our knowledge and flexibility. See Melutec Metrology for yourself and you will discover why our expertise, flexibility and innovation put us head and shoulders above the competition.

    Website Open In New icon

  5. CETA TESTSYSTEME GMBH

    Germany

    CETA Testsysteme GmbH Solution Partner for industrial Leak Testing and Flow Measurement CETA Testsysteme GmbH develops and manufactures leak tester and flow test devices (Made in Germany) and has more than 30 years of experience in solving industrial inspection tasks. The test media used are compressed air and hydrogen. The customers use the test equipment for quality assurance and production assurance in the production line. The wide range of services includes consulting, feasibility analysis, putting into operation, training, maintenance and calibration. CETA is certified according to DIN ISO 9001 and won the Quality Award North-Rhine-Westphalia in 2002 in the industry division. Since 2012, CETA has consistently been awarded a very good credit rating. Since 2004, the calibration laboratory (D-K-19566) has been accredited according to DIN EN ISO / IEC 17025 for the measurand pressure. The internationally recognized DAkkS calibration certificate complies with the requirements of the IATF 16949 standard valid in the automotive industry. With cooperation partners in currently 14 countries as well as several thousands of test equipment used worldwide, CETA presents itself as a competent solution partner for industrial leak and flow testing. For further information visit www.cetatest.com

    See all products
Office Building Outline icon
A page for your business
Can you see this? Your potential clients will too. Join us now so you too can be visible on europages
Add my business

  1. KSW KALIBRIERSERVICE JÜRGEN WOZNIAK

    Germany

    KSW Kalibrierservice – Germany's calibration professionals! We are the professional contact you want when it comes to calibration. We carry out calibration of any kind quickly, simply and proficiently. Accredited calibration laboratory, DAkkS & factory calibration (ISO). Calibration for industry, manual trades, medical technology. Electrical measurands, temperature measuring technology, pressure measuring technology, flow rate, mechanical measurands, scales, weights and more. Calibration of medical technology. Our products.: Electronic pressure gauges, calibration services, accredited test laboratories, test equipment calibration, data loggers, sensors, weights for scales of all types, measuring equipment and multi-function calibrators. Alongside calibration, we also carry out alignments.

  2. FRANZ WOHL + PARTNER PRÜFMASCHINEN GMBH

    Germany

    Franz Wohl + Partner Prüfmaschinen GmbH was founded in Schalkau, Germany, in 1990 and became the first calibration laboratory for material testing machines in Thuringia to be accredited by the Deutscher Kalibrierdienst (German accreditation service, DKD) in early 1996. Our company is accredited in line with the DAkkS, which is recognised internationally thanks to the multilateral agreement between the EA, ILAC and IAF. In addition to calibration, we also offer a full maintenance and repair service for material testing machines. For more than 30 years, our daily tasks have also included the in-house production of precise material testing and special testing machines, as well as the construction of prototypes that set new standards. Our machines always comply with the highest levels of accuracy set out in DIN standards. We also provide support for modernising existing testing machines and will convert your machines regardless of their original manufacturer or type of drive (electric, hydraulic or pneumatic).

  3. G. LUFFT MESS- UND REGELTECHNIK GMBH

    Germany

    Lufft Mess- und Regeltechnik GmbH develops and manufactures professional climate and environment measuring components and systems. Meteorological services and environmental agencies as well as building services and electricity suppliers value the precise quality that Lufft provide. Quality standards are emphasised by the use of their own calibration laboratory (DKD/DakkS). One feature of this laboratory is, amongst others, an accredited wind channel in which all wind sensors are fully checked prior to delivery.

  4. SMT-MESSZEUGE® ASCHAFFENBURG STEFFEN SCHILLER

    Germany

    Our company has been manufacturing and marketing precision gauges and measuring tools since 1986. The SMT-MESSZEUGE® brand was created in 1995. The SMT-MESSZEUGE range includes thousands of measuring tools and instruments, testing devices, plus special and precision gauges. Some measuring instruments we manufacture ourselves, others we have exclusively manufactured by partner companies that have been working with us for decades. We also purchase measuring and testing equipment from leading global manufacturers. Measuring and testing equipment can also be provided with the respective factory calibration certificate or DakkS calibration certificate (from the German accreditation authority), for an additional fee. We work together with various calibration laboratories. According to your drawings, we can offer a range of special designs including: Micrometers, thickness gauges, special gauges (special adaptations, taper gauges, ring gauges, plug gauges, left-hand threads, etc.), graduated rulers, steel rulers, vernier callipers, parallel supports, steel or aluminium assembly rulers, straight edges, centring angle plates, scales, verniers, graduated rules, and much more. Our 340-page catalogue (available in English and German) covers 6000 of the most widely used measuring and testing devices. To discover our extensive range of products including detailed images, dimensions, drawings and standards, visit our homepage at www.smt-messzeuge.de. You can also find more measuring equipment, such as assembly rulers, steel rulers, measuring shims, measuring callipers, surface comparison patterns and surface standards in our shop at www.messmittel.tools.

  5. BURSTER PRÄZISIONSMESSTECHNIK GMBH & CO KG

    Germany

    Verified by europages badge

    With passion for precision and quality the German brand burster precision measurement technology develops and manufactures since 60 years as one of the most important suppliers precision instruments, sensors and systems for sensor signal processing and process monitoring. burster applies highest quality standards in its production of components and systems in accordance with EN ISO 9001: 2015. burster supplies 7500 customers worldwide. burster’s innovative and experienced team provides intensive application support even before a decision to buy is made. Solving complex measurement problems and integrating measurement and test technology into production environments for production control, quality assurance and test-equipment monitoring are everyday's instrumentation tasks. burster supplies measuring technology ranging from individual sensors to system solutions, with emphasis on plant construction and engineering, automation, the automotive industry and its suppliers, electrical and electronic engineering and chemicals industry. It also has a presence in numerous other sectors and future markets such as electro-mobility, alternative energies, medical engineering and biotechnology. In addition to solutions employing standard products, burster provides custom OEM solutions. Many years of experience as manufacturer of measuring sensors and instruments guarantee optimum solutions. This has earned burster an international reputation for innovation geared to customers’ needs.

    Website Open In New icon See all products

  1. TEST GMBH

    Germany

    Our universal testing machines for traction, pressure, bending forces and torsion are used in research and quality assurance for materials and components. Comprehensive solutions for testing screws and connectors form the second pillar of our product range. The portfolio is rounded off by force and torque gauges. Modern technologies entail new materials which, in turn, call for new applications, functions and components. We offer our customers a complete supply chain, from design and implementation, installation and training, right through to maintenance and calibration of the testing systems.

    See all products

  2. HALSTRUP-WALCHER GMBH

    Germany

    A family-owned and highly innovative supplier of customised products halstrup-walcher GmbH is a medium-sized company, which has been in family-ownership ever since it was founded in 1946. CEO Jürgen Walcher looks back at the impressive rise of his company. "The focus of our products has changed significantly since those early days, but the precision and innovative power of our solutions have remained a constant factor." halstrup-walcher GmbH successfully manufactures and markets products in three business areas: positioning systems for automated format changeover in mechanical engineering applications, pressure measuring technology for cleanroom, air-conditioning and OEM applications as well as drive solutions based on spur gears and actuators. The approx. 160 employees develop and manufacture both standard and customer-specific solutions. The level of in-house production is remarkable. halstrup-walcher's strong quality assurance programme and lean processes have made it a highly professional partner offering impressive performance in terms of quality, costs and punctuality.

    See all products

Product recommendations

Calibration resistor - 1240
Calibration resistor - 1240

Germany

Verified by Europages
Adjustable Torque Screwdriver CAL-KIT
Adjustable Torque Screwdriver CAL-KIT

Germany

Verified by Europages
Precision RTD simulator -Model 4530
Precision RTD simulator -Model 4530

Germany

Verified by Europages
Preset Torque Screwdriver PM
Preset Torque Screwdriver PM

Germany

Verified by Europages
See more products

  1. ACQ SCIENCE GMBH

    Germany

    Verified by europages badge

    We can provide custom solutions to meet your requirements. We will work closely with you to develop tailor-made solutions for your everyday needs in and around the laboratory. We can provide control material, calibrators, contract filling and contract lyophilisation (freeze-drying). Our range of products includes ethanol, ethyl glucuronide in hairs, narcotics, drugs, blank media, products for driver safety fitness determination (SFD), drug confirmation (DCT) via urine, phosphatidylethanol (PEth) in whole blood, drug confirmation (DCT) via serum.

    Website Open In New icon

  2. LONSCHER WAAGEN GMBH

    Germany

    Lonscher Waagen has been involved in scales construction, laboratory and precision scales, shop scales and industrial scales for more than 50 years. Our quality: We are approved to conduct initial manufacturer calibration on behalf of SysTec GmbH and Techno-Control GmbH; we are accredited by DAkkS (German Accreditation Body) to provide an on-site calibration service; we are certified in accordance with DIN ISO 9001: 2015; we have over 50 years' experience in scales construction and servicing, and carry out 95% of repairs within 24 hours. Our services: Sale of all common scales types, including: Scales for explosive environments, repair and maintenance by our trained Customer Service team, preparation and presentation of scales for calibration, organisation and conducting of calibration visits, initial manufacturer calibration of scales in the event of new purchases or modifications, creation of customer-specific maintenance contracts, inspection of scales as part of measuring equipment monitoring in accordance with DIN ISO 9001: 2015, inspection of scales as part of measuring equipment monitoring in accordance with DIN ISO 17025: 2005.

  3. DFT TECHNOLOGY GMBH

    Germany

    DFT Technology produces STOCK autoclaves, which are primarily used to pasteurise and sterilise a large number of foods, as well as in the pharmaceutical industry. The most important areas of application include baby foods, meat and sausage products, ready-made meals, soups, milk, cream, beverages, fruits and vegetables, fish and pet foods. A broad range of different systems, from laboratory autoclaves and steam water spray autoclaves to multiprocess autoclaves, ensures optimal results in your area of application. In addition to autoclaves, DFT Technology also supplies accessories, e.g. spacer mats, cages and trolleys, for autoclaves from a number of manufacturers. Our range of services includes, for example, maintenance, temperature distribution measurements, sensor calibration and control conversions for all products.

  4. ANDJANA INSTRUMENTS UG

    Germany

    Andjana Instruments offers safe compressed-air quality – air quality monitoring – behind compressors – filters – activated carbon – measuring residual oil content and more: Comprehensive modular compressed air and gas measuring technologies for oil content, volumetric flow, humidity, pressure dew point, particle measurement, pressure, temperature, gases, emissions with optional data acquisition and remote diagnosis according to HACCP – GMP and FDA requirements, ISO 8573, EN 12021 breathing air; validated data records according to FDA 21 Part 11 with audit trail. Metrological safety for industry and hospitals – breathing air systems – laboratories, cleanrooms. Medical hospital breathing air systems according to ISO 7396 – European Pharmacopoeia; risk monitoring for medical compressed air – in-house production in accordance with the Medicinal Products Act; quality control for medical gases – oxygen – nitrogen – compressed air of own production. Standard and CE conformity assessments for medical gas supply systems; job measurements, calibration service, service

  5. RATIOTEC PRÜFSYSTEME GMBH

    Germany

    The company ratioTEC develops, produces and sells high-quality testing devices and testing machines for material testing of concrete, metal, stone, paper and composite materials. Our success is measured by our reliable and innovative work, as well as our quick adaptability. This is the only way to guarantee that our customers can react quickly and flexibly to new challenges. We attach great importance to the material, functionality and design of our products. Even after investing in modern testing machines, we won't leave you alone. Your testing machines should deliver precise and meaningful measurement results over the long term. We therefore offer you a comprehensive service. This includes, for example, the maintenance or repair of technical components including factory calibration and verification. For these reasons, ratioTEC Prüfsysteme GmbH has been one of the leading manufacturers of material testing machines, testing devices and laboratory equipment for the concrete and cement industry as well as universities and technical colleges for almost 30 years.

Find quotes for

screen europages
A page for your business
Add my business
Interactive map of the field Arrow Right icon
Filters

Results for

Calibration laboratories - Germany

Number of results

17 Companies

Countries

Company type

Category