Fire prevention systems - Import export

Fire Sprinklers * PENDENT TYPE SPRINKLERS / UPRIGHT TYPE SPRINKLERS / SIDEWALL TYPE SPRINKLERS / SQUARE COVER PLATE ** Materials: Brass / Orifice: K80(5,6), K115(8,0) / Response : Standard and Ouick / Activation Temp.: 57ºC , 68ºC, 79ºC, 93ºC, 141ºC / Connection Dia.: 1/2'', Working Pressure: 175 PSI (12,1 Bar), Connection Type: Thread (NPT) *** Application Areas: Residences / Hotels / Hospitals / Business Centers / Hostel / Shopping Centers / Parking Areas / Garages / Factories / Storages etc.

The Fire Thermal Infrared (FireTIR) detection system is based on fixed infrared cameras which measure the viewed surface temperatures in real time and connect to a user friendly software interface.

This fire alarm control panel meets NFPA requirement. It should be installed, commissioned and maintained by suitably qualified service personnel. Description: 1. It has 16 zones and 4 sounder outputs. 2. It has 3 standard FORM-A relays contact for alarm, fault, supervisory. And it has EIA-485 port for communication with remote delay and repeater panel. 3. It works with conventional N/O contact input devices including 2 wire, 4 wire smoke detector, heat detector, gas detector and call points etc. 4. It can be programmed by panel keypad. It is supervised all wiring, AC voltage and battery level. 5. It is required to be connected to power earth and it self checks earth fault. 6. Max.20 detectors can be equipped in one zone. Each zone can be disabled separately. 7. Output circuits: 24V resettable power output 1000mA 24V Nonresettable power output 1000mA 24V battery charger (up to 18AH battery) https://vedardalarm.

PiroStrel - a system of remote extinguishing. PiroStrel is an automatic thrower with extinguishing fillers. Each filler contains extinguishing substance inside of the polymeric cover. “Dry water” is used as a filler. This substance is completely safe for human and environment as well as it doesn’t damage your property. Due to its non- conducting features it can be used for extinguishing objects under voltage up to 35kW. The thrower shoots fillers on the distance up to 100 m. It's particularly important since in most cases it’s difficult to get closer to the seat of fire using a standard fire extinguisher. PiroStrel’s rate of fire is 300 shoots per minute. In one minute, the thrower can provide the seat of fire with the amount of fire-extinguishing substance capable to cope with up to 100 m3 of fire surface.

PiroStiker based on microencapsulation technology. PiroStiker contains inside dozens of thousands of microcapsules filled with fire extinguishing agent which enables if reached the determinate temperature and fire occurrence takes place. In case of fire, the microcapsule explodes discharging the extinguishing gas, which displace oxygen, chill the surface and suppress fire. Fire extinguishing agent is ecologically safe, it doesn’t cause harm to human’s health and doesn’t damage equipment.

FINFIRE is new generation fire extinguishers. FINFIRE "SPHERE" - autonomous powder fire extinguishing device to extinguish without human intervention fires of solid, liquid and gaseous substances, as well as electrical equipment under voltage: A, B, C, E classes. FINFIRE "SPHERE” is used in warehouse, technological, household premises, garages, apartments, shops, vehicles, and other places. Used as portable fire extinguishers or in addition to them. Extremely simplified design does not require special skills and great physical effort which helps to significantly save time in critical situations. The devices consist of a polystyrene body filled with fire extinguishing powder. Fire-conducting cords run along the edges of the body. The cords will activate the device upon contact with fire. Within 10 seconds after triggering, a pop is heard (additional warning signal). At the same time, the housing ruptures and the extinguishing powder is ejected.

AUPT GRIB is designed for fire extinguishing of electrical cabinets, electrical panels in residential and industrial premises. The device is made of modern ecological material and equipped with a magnetic holder. For installation, simply magnet the "Grib" to a metal surface inside your control cabinet. Inside the device there are macrocapsules are filled with a perfect extinguishing agent, the so-called "dry water". When heated, the capsule is destroyed, and the extinguishing composition extinguishes fires.

GreCon makes people and places safer and enables the ‘smart factory’ as the leading provider of industrial fire prevention and process measurement solutions. We offer a full turnkey package from design to installation and aftercare.

<Product Features> An Innovative Product with... Fire Zero : Extinguishing the fire within a second Power Zero : No electric power needed Installation Zero : Easy Installation Maintenance Zero : No Maintenance Needed Toxic Zero : Harmless to humans Residue Zero : No Residual substance after extinguishment Ultra Light : Products weights : 70g~ Low Cost : Competitive price : contact us~ <Product Use> Electric boards, Switch boards, Safes, Servers, Electric Lockers and other medium & large sized Cabinets <Company Information> since the establishment in 1999, Actiontech has made continuous and tremendous efforts to pioneering the future and contributing to the advance system of mankind by developing and providing the RFID related security solution and system under a business philosophy of elevation the quality of human life.

<Product Features> Eco-friendly halogen free Excellent insulation Minimum temperature for shrinkage : 90 °C Working temperature : -55 °C ~ +105 °C Ratio of shrinkage 2:1 <Company Information> since the establishment in 1999, Actiontech has made continuous and tremendous efforts to pioneering the future and contributing to the advance system of mankind by developing and providing the RFID related security solution and system under a business philosophy of elevation the quality of human life.

60X40X30 - Ref. 73210

80x80x50 - Ref. 73209

This tool is used by home owners, commercial maintenance staff, and fire safety inspectors. With the Smoke Detector Pole you can make testing your smoke detectors safe and easy. No more ladders, brooms, sticks, or inconvenience. Created by a housing inspector, the patent pending design makes it possible for anyone to test smoke detectors quickly and with ease. Max. Pole length is 5m Easy to use,all the parts in one case Smoke testing pole for fire alarm system https://vedardalarm.com/smoke-detector-testing-instrument-fire-system-inspection-p-246 Fire security system maintenance tools. https://www.vedard.com/forum/fire-extinguish-fighting-system-control-fire-t346.html

Autonomous fire extinguishing system Hyperbola is designed to extinguish without human intervention class A, B fires and electrical equipment under voltage in objects of protection of small volume from 0.03 to 2.2 m3, located in rooms with operating temperatures from minus 40 ° С to plus 60 ° С and relative air humidity up to 98 percent at a temperature of + 25 ° С. The product is a sealed tube made of a special polymer material filled with a liquid extinguishing agent (GFFS) - a liquefied mixture based on organofluorine substances, sealed at both ends. The unit has overpressure inside the housing. The polymer material provides reliable storage of the extinguishing agent and its release under strictly defined conditions.

Fire Suppression in Fume Cupboards. Add Layer of Protection Fume Cupboards control the risk of fume inhalation, those same contaminants that a Fume Cupboard is protecting the operator, environment, and equipment from, can also contribute to the risk of a fire. Fume Extractions Systems should ideally protect both. Fire suppression systems, can be retrofitted as an option for all types of Fume extraction systems This unit is not recommended for preparation rooms where the Fume Cupboards are used for long periods of time as this will degrade the carbon filter faster than expected.

Fire Suppression in Fume Cupboards. Add Layer of Protection Fume Cupboards control the risk of fume inhalation, those same contaminants that a Fume Cupboard is protecting the operator, environment, and equipment from, can also contribute to the risk of a fire. Fume Extractions Systems should ideally protect both. Fire suppression systems, can be retrofitted as an option for all types of Fume extraction systems This unit is not recommended for preparation rooms where the Fume Cupboards are used for long periods of time as this will degrade the carbon filter faster than expected.

There are different risks of fire and explosion in industrial processes. GreCon has a complete range of suitable detectors to address these different risks.

Patol offers the ASD 535 Aspirating Smoke Detector. The ASD 535 consists of one or two independent sampling pipes, each having one or more sampling apertures and a sampling chamber. The air of the space being monitored is sucked in for precise analysis by the scattered-light smoke detector located in the sampling chamber.

The Patol Linear Heat Detection Cable (LHDC) is designed to provide early detection of fire and overheating in circumstances where other forms of detection would not be viable, either due to inability to sustain the environment requirements or through prohibitive costs. Patol also offers a Line Type Heat Detector system.

Aerosol generator “MAG” is intended to extinguish fire of A,B,C and E classes in enclosed spaces. The extinguishing agent is safe for human and doesn’t require people evacuation. The fire extinguishing occurs due to a chemical reaction therefore interfering in combustion process with no oxygen isolation. The actuation of the generator occurs by means of linear heat detection under given temperature (short circuit of electric buttery takes place) or by means of Fipron-Cord when placed in the seat of fire.

Patol can design and manufacture control modules and fire & safety control equipment panels and cubicles to meet the requirements of national standards, client specifications or project needs.

Nanofirex is throw type that is identified with boron minerals that do not contain FLOUROCARBON. It can be used all kind of areas have possibility of fire. Not to approach fire, enough to throw the center of fire and hit the hard floor. • It is disposable with child-proof lid and a special design bottle which can be easily broken when hit a hard floor. • In the event of fire, there is usually dark environment as the electricity cut off. Nanofirex’s special bottle turns the user stored energy into the light, illuminates where it is and user easily finds. • NANOFIREX THROW TYPE LIQUID FIRE EXTINGUISHER is convenient in terms of transportation and application time compared to other fire extinguishers, because it is placed on the surface of the wall and mounted to give decorative apperance. • Not only can use all ages of people easily, but also throwing the center of fire is just enough NANOFIREX THROW TYPE FIRE EXTINGUISHER is patent protection as a product of intensive R&D work.

Unlike traditional detection systems, Reflected Beam Smoke Detectors were designed for spacious rooms, open areas, and high ceilings. Their innovative features make them popular choices for spaces like warehouses, atriums, arenas, and churches. With only one device to install and align, these single-ended optical beam solutions save you time and money on open-area and high-ceiling applications. The firebeam protection system includes a motorised head unit containing an infra-red transmitter and receiver, a ground level controller and prism reflector. Making use of the prism reflector the returned infra-red beam is analysed for smoke contamination and registers a fire condition at a pre-determined level. At ground level the controller unit is used to make operational adjustments. The standard protection system covers a range of 5 to 40 meters. https://vedardalarm.com/conventional-reflected-beam-smoke-detection-p-169 https://www.vedard.com/forum

Connection Type: U bolt or Threaded / Working Pressure: 400 - 450 PSI / Working Temp.: 0ºC , +49ºC. ** In wet pipe systems, generally pedal type water alarm switches are used for informing users 4-10 gpm water flow has started. Water flow switches are used in Aqueous and foam fire extinguishing systems. They are used in only wet pipe systems. Because of the dry contact feature it appears on the control panel. Flow switches are suitable for the using in indoor and outdoor. *** Application area: All wet pipe lines

Arch Fire Systems has solidified its position as a leader in the provision of Fire Systems. Through its bespoke design, installation, maintenance and training services, along with its commitment to standards compliance and customer satisfaction, our company effectively promotes fire safety.

The Patol Infra-Red Heat Detectors are designed to provide an early warning of fire or overheat conditions of material being transported on conveyor systems. The unique principle of operation will detect black body infra-red emissions at low thermal energy levels.

Ensure that you’re protected with the highest quality fire detection and extinguishing facilities with the help of the London City Fire & Electrical Group. Our team is experienced in every facet of fire alarm system design, installation, and service. All fire detection and alarm systems must be regularly serviced in order to highlight any potential faults and to provide the preventative maintenance that keeps them reliable for the foreseeable future. Let us help you ensure you’re giving your fire safety systems the care they need. In order to make our services as accessible as possible, we offer a free quotation, as well as a price match guarantee to provide you with more value than anyone else in the industry.