Fire extinguishing equipment - Import export

Ref. 73250PC

NOZZLE EN LAITON FONTE ENTRÉE FILETÉE 25MM POIGNÉE EN ALUMINIUM 3 POSITIONS - Ref. 020304AGPF

NOZZLE EN LAITON ENTRÉE STORZ 52 3 POSITIONS Ref. 020226AGC

NOZZLE EN LAITON FER FONDU ENTRÉE DES CANAUX 45MM 3 POSITIONS - Ref. 020227AGC

PS2415 is used to power the components of fire alarm system, fire extinguishing equipment and alert equipment with an operating voltage of 24 V.

The purpose of fire compartmentation is to to prevent the spread of fire to or from another part of the same building or an adjoining building. The compartment wall seperate the fire risk areas in a building (low, medium and high risk). The higher the fire risk in the area, the more fire resistant the compartment (30 minutes, 60 minutes, 90 minutes or 120 minutes). It also depends on the type of building and its height. Fire compartments are achieved by means of: Fire doors, curtains, shutters Fireproof partitions Fireproof ceilings Fire-stop closures Consult our professionals Do not hesitate to contact us, we can draw up an estimate together to find the best solution for your security.

The Fibreflam ISO6 curtain is a flexible partitioning curtain without irrigation. With a fire resistance degree of EI60, it also conforms to the DAS NF S61-937-1 and -4 standard. Thanks to its control panel and its motor operating in 400V, the closure of the curtain is obtained by gravity in case of fire alarm. Only its reopening is motorised. The standard dimensions of this fire curtain are up to 4.36 m wide and 4.21 m high. In spaces with strong architectural constraints, this curtain can easily be hidden behind cladding. We can help you with this project, so don't hesitate to submit your requirements via this contact form or by clicking on our website

M/F 45MM Ref. 020145UL 50MM Ref. 020150UL 60MM Ref. 020160UL 70MM Ref. 020170UL

Aerosol generator “MAG” is intended to extinguish fire of A,B,C and E classes in enclosed spaces. The extinguishing agent is safe for human and doesn’t require people evacuation. The fire extinguishing occurs due to a chemical reaction therefore interfering in combustion process with no oxygen isolation. The actuation of the generator occurs by means of linear heat detection under given temperature (short circuit of electric buttery takes place) or by means of Fipron-Cord when placed in the seat of fire.

PiroStiker based on microencapsulation technology. PiroStiker contains inside dozens of thousands of microcapsules filled with fire extinguishing agent which enables if reached the determinate temperature and fire occurrence takes place. In case of fire, the microcapsule explodes discharging the extinguishing gas, which displace oxygen, chill the surface and suppress fire. Fire extinguishing agent is ecologically safe, it doesn’t cause harm to human’s health and doesn’t damage equipment.

AUPT GRIB is designed for fire extinguishing of electrical cabinets, electrical panels in residential and industrial premises. The device is made of modern ecological material and equipped with a magnetic holder. For installation, simply magnet the "Grib" to a metal surface inside your control cabinet. Inside the device there are macrocapsules are filled with a perfect extinguishing agent, the so-called "dry water". When heated, the capsule is destroyed, and the extinguishing composition extinguishes fires.

Fipron-Cord — innovative independent fire extinguishing mean compound of composite materials. It represents a mix of microcapsules with an inner heating agent. When exposed to fire, a heating agent in a cord enables followed by a chemical reaction through the whole length of cord. Such reaction comes with heat impact that leads to explosion of all microcapsules and release fire heating substance. Fipron Cord product can be installed together with a high voltage electric cable in closed cable ducts located both indoors and outdoors with an operating temperature from minus 50 ° C to plus 80 ° C.

FINFIRE is new generation fire extinguishers. FINFIRE "SPHERE" - autonomous powder fire extinguishing device to extinguish without human intervention fires of solid, liquid and gaseous substances, as well as electrical equipment under voltage: A, B, C, E classes. FINFIRE "SPHERE” is used in warehouse, technological, household premises, garages, apartments, shops, vehicles, and other places. Used as portable fire extinguishers or in addition to them. Extremely simplified design does not require special skills and great physical effort which helps to significantly save time in critical situations. The devices consist of a polystyrene body filled with fire extinguishing powder. Fire-conducting cords run along the edges of the body. The cords will activate the device upon contact with fire. Within 10 seconds after triggering, a pop is heard (additional warning signal). At the same time, the housing ruptures and the extinguishing powder is ejected.

FINFIRE is new generation fire extinguishers. FINFIRE "TAB" - autonomous powder fire extinguishing device to extinguish without human intervention fires of solid, liquid and gaseous substances, as well as electrical equipment under voltage: A, B, C, E classes. FINFIRE "TAB” is used in warehouse, technological, household premises, garages, apartments, shops, vehicles, and other places. Used as portable fire extinguishers or in addition to them. Extremely simplified design does not require special skills and great physical effort which helps to significantly save time in critical situations. The devices consist of a polystyrene body filled with fire extinguishing powder. Fire-conducting cords run along the edges of the body. The cords will activate the device upon contact with fire. Within 10 seconds after triggering, a pop is heard (additional warning signal). At the same time, the housing ruptures and the extinguishing powder is ejected.

Autonomous fire extinguishing system Hyperbola is designed to extinguish without human intervention class A, B fires and electrical equipment under voltage in objects of protection of small volume from 0.03 to 2.2 m3, located in rooms with operating temperatures from minus 40 ° С to plus 60 ° С and relative air humidity up to 98 percent at a temperature of + 25 ° С. The product is a sealed tube made of a special polymer material filled with a liquid extinguishing agent (GFFS) - a liquefied mixture based on organofluorine substances, sealed at both ends. The unit has overpressure inside the housing. The polymer material provides reliable storage of the extinguishing agent and its release under strictly defined conditions.

Fire Hose Cabinet ** / Vertical Type - Split fire extinguisher / Decorative Fire hose Cabinet ( RED) / Size: 70x95x25 cm or Desired size / Any colour can be paint

Double piston extinguisher backpacks can be used for fire. Portable and foldable polyester backpack 100 cm hose with double piston water injection 15 meter water injection range 18 lt water capacity 2 different type of blasting Double Piston

Generally supplied with adjustablre keeper plate (S01), a release button and a protection circuit. Available with holding force 50kgs or 100kgs, 24Vdc standard.

Test and Drainage Valves / Body: Brass ( Forged ) / Ball : Brass / Gasket : PTFE ** Connection Type: Threaded or Grooved / Working Pressure: 300 PSI ( 20,6 Bar ) / Working Temp.: -10ºC , +120ºC / Working Test Pressure: 600 PSI (61,8 Bar) *** In sprinkler systems, these valves are used for the testing systems and drain the unnecessary fluids from the systems. Advantages: They have sight glasses in their body,single valve is sufficient to drain the line. For choosing the test and drain valves, users should pay attention to line diameter. Also these valves have to have same diameter with the sprinkler orifice diameter. **** Application areas: The system where has sprinkler systems.

Material: custom size: according to drawings Our company (Huan-Tai) is rooted in China since mid-90’s. As one of the early runners, we bring value to the table through our capabilities in engineering, quality control and schedule management that meet the high expectations of overseas customers in stability, consistency and predictability. We focus on quality and consistency. Batch production are always consistent with sample. Our Quality assurance: 1. Non-destructive test (NDT): magnetic particle examination (MPE), ultrasonic examination (UE), liquid penetration examination (LPE), X ray. 2. Experienced inspector on dimensions, CMM dimension testing and other tools. 3. To maintain our reputation, we still have excellent return and claim policy even some rare defects. 4. Our prices are always competitive. 5. Spectrometers to assure the material.

Run with 24Vdc (+/-10%) supply Relay contact output Long maintenance-free service life

Patol offers the ASD 535 Aspirating Smoke Detector. The ASD 535 consists of one or two independent sampling pipes, each having one or more sampling apertures and a sampling chamber. The air of the space being monitored is sucked in for precise analysis by the scattered-light smoke detector located in the sampling chamber.

Patol can design and manufacture control modules and fire & safety control equipment panels and cubicles to meet the requirements of national standards, client specifications or project needs.

Geared or lever operated monitor with flow rates up to 4500 litres per minute. With jet/spray nozzle suitable for use with water or AFFF foam.

Aluminised close proximity fire suits available as one piece coverall or two piece jacket and trousers. Complete with aluminised hood, aluminised gloves and overboots.

Designed for rapid one man deployment with 130 litre foam tank. Unit is complete, with foam inductor, hoses and foam branchpipe.

Body: ASTM B-536 Nylon- 11 Coated / Gear Box: ASTM A-536 / Disc: ASTM B-356 EPDM Encapsulated / O-Ring: EPDM / Handwheel: ASTM A-536 / ** Connection Type: Flanged or Grooved or Threaded / Working Pressure: 300 PSI ( 20,6 Bar ) / Working Temp.: -10ºC , +120ºC / Working Test Pressure: 600 PSI (61,8 Bar) *** It is identified as a local control valve. It is used as a shut-off valve on water feed lines to disconnect (control) in-situ zones. A butterfly valve or rising stem valve is used to shut off or control. the position of all valvesused in fire systems should be visible and electrically traceable. Butterfly valves are of a gearbox handwheel type. The supervisory switch of a butterfly valve are located inside the valve and there is an on/off indicator on it. **** Application Areas:Residences / Hotels / Hospitals / Business Centers / Shopping Centers

Body: Ductile Iron / Stem,Springs: Stainless Steel / Disc: Brass or Aluminium or Bronze / Disc gasket or Disc washer : EPDM / ** Connection Type: Flanged or Grooved / Working Pressure: 300 PSI ( 20,6 Bar ) / Working Temp.: -10ºC , +120ºC / Working Test Pressure: 600 PSI (61,8 Bar) *** The wet alarm valve is designed for applications where the water is unlikely to freeze. The water staying pressurized in the pipes is released over the fire area after the sprinkler is activated due to fire. The pressurized water system is not only feed contionuously, but also fills in the retard chamber. After the chamber is filled, the pressure switch on the chamber is actuated. The pressure switch sends the alarm information to the fire warning system or the automation system. After the pressure switch is actuated, the water is delivered to the water-motor gong and releases a mechanical alarm.