Cables & networks - Import export

Power cable with copper cores, XLPE insulation, PVC or polymer halogen free composition sheathed power cable, shield: copper foil, tape or braids, armour: zinc-coated steel wire, aluminium tape, zinc-coated steel tapes.Application: these cables are suitable for indoor and outdoor installation, in air and ground, where the cables should be flame retardant and halogen free. Fire resistant/flame-retardant/low smoke/low smoke and toxic fumes/cold resistant/shielded/armoured/halogen free

Copper busbars are produced of electrical copper. The products are convenient in use, practical and durable. Copper busbars have high bandwidth and don't require additional service. The life cycle of the copper busbar is longer than the cable's one. The installation of the copper busbar is easier.

Is used for backbone FOCL supports as a supplemental fastening. This mount is sliding, which can significantly accelerate the installation of a cable line. This mount is multi-purpose and does not depend on cable diameter.

Designed specifically for servicemen of telecommunications companies. The product consists of four compartments: In the first large compartment there are compartments in which the following items can be placed: laptop, charger, folder, with documents, cables. In the second middle compartment there is a pouch with tools. In the pouch, you can place: connector crimping tool, flat, cross-head screwdrivers, stationery knife, wire cutters, a hammer, pliers, electrical tape/zip ties, RG45 connectors, Scotchloks. In the third middle compartment there is a pouch with compartments for items: measuring device, organizer with consumables, test tube, Tone Generator, Multimeter. The fourth small compartment can include: splitters, RJ45/RJ11 sockets, stock of Scotchlocks, stock of clamps, The backpack is designed specifically for servicemen of telecommunications companies.

It is applied for laying trunk and subscribers cable lines indoor. Its specific feature is round design and aesthetic appearance. Cable lines are laid via the duct slot. The cable tray has technological parts for fixing it to the wall.

Designed for installation in hallways and staircases. Is used for PON networks in apartment buildings. The cabinet can accommodate: – a removable panel for optical terminal boxes or an optical cassette type PLC splitter (130x100x25 mm). – box-type optical coupler (90*20*10) – 2 pcs. – 4 optical adapters SC type. No FOCL welding is required. Up to 8 pcs. of cable slack max 30 cm.

Is used for backbone and subscriber FOCL supports as a bracket for an optical distribution box type SNR-FTTH-FDB-24A. This bracket allows storing a cable slack in a coil Ø350 mm in the space between the bracket and the support body.

Is used for backbone and subscriber FOCL supports as a loop fastening for vertical and horizontal cable installation along the support. Replacement of UK-P-(Sh)

Is used for backbone and subscriber FOCLs as an addition to UK-N/U Multi Mounting Unit 150mm extension (for reinforced-concrete supports) when a FOC needs to be mounted on a support. Provides 150 mm FOC projection from the support.

It is applied as an anchor fastening for trunk and subscriber lines, providing offset up to 150 mm between the fixing point of the optical fibre transmission line and the support body. This fastening unit can be fitted with the "installation bracket for the optical distribution cabinet with 150 mm offset (on SV support)" for further placement of the distribution optical cabinet.

It is applied as anchor fastening for trunk and subscriber optical fibre transmission lines

SC/APC type PON connector

Cable TV 1xRF output, SC/APC type PON connector, Broadcast storm control, ACL access control

Used for PON station equipment with capacity up to 32 ports, its power supply equipment and backup equipment united in one node. It is possible to install up to 9U active and passive equipment in the top part of the cabinet.

The design includes a box for connecting FTP and standard camera wires as well as a bracket for attaching input cable. The camcorder is attached directly to the box with self-tapping screws.

The cabinet can accommodate: – a removable panel for optical terminal boxes or an optical cassette type PLC splitter (130x100x25 mm). – box-type optical coupler (90*20*10) – 2 pcs. – 4 optical adapters SC type. No FOCL welding is required. Up to 8 pcs. of cable slack max 30 cm.

Sharpey is fastened with dowels and screws directly to the wall in the communal stairwell. According to Ufanet standard, no more than 10 SM-1 cables are installed inside the cabinet.

It is applied in private houses during installation of PON networks. The cabinet has 4 slots for placement – removable panel for optical crosses or optical divider cassette type (130x100x25 mm). In addition, the cabinet can accommodate up to 3 ku-1 cassettes for optical fiber welded joints.

Fastening unit is applied as an anchoring and supporting fastener in private houses during installation of the trunk and subscriber optical fibre transmission lines. Installation: The part is fastened to the support with the mounting band (2 pcs.)

The patch cord is designed for indoor installation during connection of the subscribers. Description: Optical patch cord made of DROP cable for indoor application. White cable jacket is resistant to temperature drops. Network construction using patch-cords: - Quick and easy installation - Minimum welding - High connection speed - Easy operation -Aesthetics 1SM SC/APC-SC/APC 5m/10m/15m

The patch cord is designed to be suspended at the overhead line supports during installation of the trunk line, and to connect subscribers. Description: Optical patch cord made of DROP cable for outdoor application. Black cable jacket is resistant to temperature drops. Network construction using patch-cords: - Quick and easy installation - Minimum welding - High connection speed - Easy operation

Optical patch cord made of DROP cable for outdoor application. Black cable jacket is resistant to temperature drops. Cable lengths are made according to customer's request. Network construction using patch-cords: - Quick and easy installation - Minimum welding - High connection speed - Easy operation - Aesthetics

Semicircular metal duct is used to protect cable lines running both inside and outside buildings. Mounting to the wall is carried out using dowel nails or a mounting gun. Installation: It is fixed to the wall using dowel nails or powder-actuated fastening tool.

Metal triangular duct is applied to protect cable lines both indoors and outdoors. Installation: it is fixed to the wall using dowel nails or powder-actuated fastening tool.

Cable tray Unicor applied for laying trunk and subscribers cable lines. Its specific feature is absence of the cover, cable lines are laid via the duct slot. The cable tray has technological parts for fixing it to the wall. The cable tray has the Fire Safety Certificate.

Aerial optical cable, self-supporting, dielectric, with a central tube with up to 48 optical fi bers, with a strength member made of two FRP rods, with an outer PE sheath. An additional strength member made of aramid yarns or glass yarns is added to cables with tensile force from 3 kN and more. Operational temperature of the cable is from -60°С to 70°С. Minimum temperature for installation is -30°С.

Optical cable for backbone networks with a central strength member made of glass-reinforced plastic rod (GRP) or steel wire in PE sheath (or without it); tubes containing up to 24 optical fi bers each and (if necessary) fi lling dummy tubes are stranded around the strength member in intermediate PE sheath; with armor of round steel wires and in outer PE sheath. Working temperature of the cable is from -60 to 70° С. Min. allowable temperature for laying is -30°С.

Indoor optical cable with a central tube containing up to 48 optical fibers, with a strength member made of steel wire and outer fire-retardant PE sheath. Operational temperature of the cable is from -40°С to 70°С. Minimum temperature for installation is -10°С.

Indoor distribution optical cable with free access to optical fibers; the cable contains up to 24 microtubes with optical fibers; each microtube can contain up to 12 optical fibers. The microtubes are loosely laid in Low-Smoke Zero-Halogen sheath. There are two FRP rods as a strength member. Operational temperature for cables is from -10°С to 50°С. Minimum temperature for installation is -30°С.